Current perspectives, challenges, and future directions in the electrochemical detection of microplastics.

Microplastics (5 µm) are a developing threat that contaminate every environmental compartment. The detection of these contaminants is undoubtedly an important topic of study because of their high potential to cause harm to ecosystems. For many years, scientists have been assiduously striving to surmount the obstacle of detection restrictions and minimize the likelihood of receiving results that are either false positives or false negatives. This study covers the current state of electrochemical sensing technology as well as its application as a low-cost analytical platform for the detection and characterization of novel contaminants. Examples of detection mechanisms, electrode modification procedures, device configuration, and performance are given to show how successful these approaches are for monitoring microplastics in the environment. Additionally included are the recent developments in nanoimpact techniques. Compared to electrochemical methods for microplastic remediation, the use of electrochemical sensors for microplastic detection has received very little attention. With an overview of microplastic electrochemical sensors, this review emphasizes the promise of existing electrochemical remediation platforms toward sensor design and development. In order to enhance the monitoring of these substances, a critical assessment of the requirements for future research, challenges associated with detection, and opportunities is provided. In addition to-or instead of-the now-in-use laboratory-based analytical equipment, these technologies can be utilized to support extensive research and manage issues pertaining to microplastics in the environment and other matrices.

Impact of pathogenic bacterial communities present in wastewater on aquatic organisms: Application of nanomaterials for the removal of these pathogens.

Contaminated wastewater (WW) can cause severe hazards to numerous delicate ecosystems and associated life forms. In addition, human health is negatively impacted by the presence of microorganisms in water. Multiple pathogenic microorganisms in contaminated water, including bacteria, fungi, yeast, and viruses, are vectors for several contagious diseases. To avoid the negative impact of these pathogens, WW must be free from pathogens before being released into stream water or used for other reasons. In this review article, we have focused on pathogenic bacteria in WW and summarized the impact of the different types of pathogenic bacteria on marine organisms. Moreover, we presented a variety of physical and chemical techniques that have been developed to provide a pathogen-free aquatic environment. Among the techniques, membrane-based techniques for trapping hazardous biological contaminants are gaining popularity around the world. Besides, novel and recent advancements in nanotechnological science and engineering suggest that many waterborne pathogens could be inactivated using nano catalysts, bioactive nanoparticles, nanostructured catalytic membranes, nanosized photocatalytic structures, and electrospun nanofibers and processes have been thoroughly examined.

Influence of graphene oxide on the toxicity of polystyrene nanoplastics to the marine microalgae Picochlorum sp.

Graphene oxide (GO) features distinctive physical and chemical characteristics; therefore, it has been intensively investigated in environmental remediation as a promising material for clean-up of soil contamination and water purification and used as immobilization material. Plastic is a widespread pollutant, and its breakdown products such as nanoplastics (NPs) should be evaluated for potential harmful effects. This study is aimed to evaluate the influence of GO on the toxicity of polystyrene (PS) NPs to the marine microalgae Picochlorum sp. over a period of 4 weeks. The capability of GO to reduce the toxic effects of PS NPs was assessed through investigating exposure sequence of GO in the presence of 20 nm diameter-sized polystyrene NPs. This was accomplished through five test groups: microalgae pre-exposed to GO prior to incubation with PS NPs, microalgae post-exposed to GO after incubation with PS NPs, microalgae simultaneously exposed to GO and PS NPs, and individual exposure of microalgae to either GO or PS NPs. Cytotoxicity assay results demonstrated that microalgae pre-exposed to GO prior to incubation with PS NPs showed an increased viability and chlorophyll a content. The pre-exposure to GO has reduced the growth inhibition rate (IR) from 50%, for microalgae simultaneously exposed to GO and PS NPs, to 26%, for microalgae pre-exposed to GO. Moreover, the lowest level of reactive oxygen species (ROS) was recorded for microalgae exposed to GO only and microalgae pre-exposed to GO. Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) observations revealed some morphological changes of both algae and their extracellular polymeric substances (EPS) upon GO and PS NPs exposure combinations. The sequence of GO exposure to aquatic microorganisms might affect the level of harm caused by the PS NPs. Therefore, application of GO as part of an immobilization material and in the removal of pollutants from water should be carefully investigated using different pollutants and aquatic organisms.

Graphene Oxide (GO) Materials-Applications and Toxicity on Living Organisms and Environment.

Graphene-based materials have attracted much attention due to their fascinating properties such as hydrophilicity, high dispersion in aqueous media, robust size, high biocompatibility, and surface functionalization ability due to the presence of functional groups and interactions with biomolecules such as proteins and nucleic acid. Modified methods were developed for safe, direct, inexpensive, and eco-friendly synthesis. However, toxicity to the environment and animal health has been reported, raising concerns about their utilization. This review focuses primarily on the synthesis methods of graphene-based materials already developed and the unique properties that make them so interesting for different applications. Different applications are presented and discussed with particular emphasis on biological fields. Furthermore, antimicrobial potential and the factors that affect this activity are reviewed. Finally, questions related to toxicity to the environment and living organisms are revised by highlighting factors that may interfere with it.

Thermally induced oxygen related defects in eco-friendly ZnFe2O4 nanoparticles for enhanced wastewater treatment efficiencies.

Herein, a simple but highly effective strategy of thermal annealing to modulate oxygen vacancies related defects in ZnFe2O4 (ZFO) nanoparticles for obtaining enhanced wastewater treatment efficiencies is reported. The as-prepared nanoparticles were thermally annealed at three different temperatures (500 °C, 600 °C and 700 °C) and their phase purity was confirmed by X-ray diffraction (XRD). All samples were found to exhibit pure phases of ZFO with different crystallite sizes ranging from 10 nm to 25 nm. The transmission electron microscope (TEM) images showed well dispersed nanoparticles and a strong correlation of grain size growth with annealing temperature was established. The optical absorption and emission characteristics were estimated through UV-visible and Photoluminescence (PL) spectroscopy. Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS) confirmed the variation of oxygen vacancies in the synthesized samples' lattice. The photocatalytic activities of all samples were investigated and the highest efficiencies were recorded for the ZFO samples annealed at 500 °C. Under high salinity condition, the organic dye degradation efficiency of the same sample remained the highest among all. The excellent dye degradation abilities in ZFO samples can be attributed to the abundance of oxygen vacancies in the crystal lattice that slow down the recombination rate during the photocatalysis process. Moreover, cytotoxicity tests revealed that all prepared ZFO samples showed insignificant cell structure effects on Picochlorum sp microalgae, as verified by Fourier-transform infrared (FTIR) spectroscopy. On the other hand, no significant changes were detected on the viable cell concentration and Chlorophyll a content. This work presents a systematic way to finely tune the crystal sizes and to modulate oxygen related defects in ZFO through a highly effective annealing approach to signify their potential in industrial wastewater and seawater treatment processes.

Investigation of the toxic effects of different polystyrene micro-and nanoplastics on microalgae Chlorella vulgaris by analysis of cell viability, pigment content, oxidative stress and ultrastructural changes.

Plastics of different sizes (micro- and nano-sized) are often identified in aquatic environments. Nevertheless, their influence on marine organisms has not been widely investigated. In this study, the responses of the microalga Chlorella vulgaris to micro- and nanoplastics exposure were examined using long term toxicity test. The plastics tested were carboxyl-functionalized and non-functionalized polystyrene of 20, 50 and 500 nm in diameter. A reduction in algal cell viability and chlorophyll a concentration has been observed after exposure to the small sizes (20 and 50 nm) of plastics. Lactate dehydrogenase activity and reactive oxygen species concentration/production were significantly higher after exposure to the 20 nm nanoplastics than that of control confirming the stress condition. Fourier transform infrared (FTIR) spectroscopy analysis proved the attachment of nanoplastics to microalgae and rearrangement of extracellular polymeric substances. The cellular stress appeared as increased cell size, deformed cell wall and increased volume of starch grains.

Toxicity Effect of Silver Nanoparticles on Photosynthetic Pigment Content, Growth, ROS Production and Ultrastructural Changes of Microalgae Chlorella vulgaris.

Silver nanoparticles (Ag NPs) exhibit antibacterial activity and are extensively used in numerous applications. The aim of this study was to examine the toxic effect of Ag NPs on the marine microalga, Chlorella vulgaris. The microalgae, at the exponential growth phase, were treated with different concentrations of Ag NPs (50 and 100 nm) for 96 h. X-Ray diffraction (XRD) results indicated that the used NPs are single and pure Ag phase with a mean crystallite size of 21 and 32 nm. Ag NPs were found to have a negative effect on viable cell concentration, a variable effect on chlorophyll a concentration, and increased ROS formation. Transmission electron microscopy (TEM) analysis revealed that Ag NPs were present inside the microalgae cells and formed large aggregates in the culture medium. Ag+ ions, in the form of AgNO3, were also assessed at higher concentrations and found to cause inhibitory effects.

Toxicity effect of graphene oxide on growth and photosynthetic pigment of the marine alga Picochlorum sp. during different growth stages.

Graphene oxide (GO), a recently discovered material, has been investigated for many applications in various fields. Thus, an immense awareness should be paid on the potential effects of the material on the environment as huge quantities of GO may get to the environment. Aquatic organisms, marine algae as an example, are exposed to such material when disposed to the environment. Accordingly, it is significant to assess the probable interactions of GO with algae in evaluating its possible environmental risks. In this study, we have examined the effect of different concentrations of GO on Picochlorum sp. during the different growth phases. The results showed that the toxicity of GO increases with increasing its concentration. The lowest concentration (0.5 mg L-1) was found to improve the algae growth and pigment content of Picochlorum sp. In contrast, higher GO concentrations had a negative consequence on the growth of algae and photosynthetic pigment concentration.

Cumulative effect of zinc oxide and titanium oxide nanoparticles on growth and chlorophyll a content of Picochlorum sp.

The use of nanoparticles (NPs) is of increasing significance due to their large potential for various applications. Great attention should be paid on the possible impacts of nanoparticles on the environment as large amounts of them may reach the environment by accident or voluntarily. Marine algae are potential organisms for usage in nanopollution bioremediation in aquatic system, because of their ability to adapt to long exposure to NPs. Thus, it is of prime importance to study the possible interactions of different NPs with microalgae in assessing their potential environmental risks. Most studies on potential environmental effects of ZnO and TiO2 NPs have been performed independently and following the widely accepted, standardized test systems, which had been developed for the characterization of chemicals. In this study, we have examined the cumulative effect of ZnO and TiO2 NPs on Picochlorum sp. in addition to the individual effects of these NPs over 32 days. Our results indicate that the toxicity and availability of NPs to marine algae are reduced by their aggregation and sedimentation. NPs are found to have a negative effect on algal growth and chlorophyll a concentration during the early growth stages. In contrast, the case is reversed during the late growth stages. There is no significant difference between the effect of the NPs when they are used separately and when both ZnO and TiO2 are used together in the test (P > 0.05).

Effect of magnetic iron oxide (Fe3O4) nanoparticles on the growth and photosynthetic pigment content of Picochlorum sp.

Magnetite iron oxide (Fe3O4) nanoparticles (NPs) are key materials applied in many different fields of modern technology. The potential environmental impact of these NPs is of great concern. In this study, initially the effect of Fe3O4 NPs size (20 and 40 nm) as well as bulk (>100 nm) at 200 mg L(-1) on Picochlorum sp. (Trebouxiophyceae, Chlorophyta) is investigated during the different growth phases. The most inhibitory NPs were then chosen to assess their effects at different concentrations. The 20 nm NPs at 200 mg L(-1) were found to significantly reduce the viable cell concentration and chlorophyll a content during the exponential growth phase compared to the other particle sizes. However, the 20 nm NPs at different concentrations were found to promote algal growth during the late growth stages (stationary and decline phases) compared to the control. Additionally, algae were found to accelerate the aggregation and sedimentation of nanoparticles into the medium and therefore can be considered as potential organisms for bioremediation of nano-pollution.