RESUMEN
Soft body armor with a strain-sensing function using conductive shear thickening fluids (STFs) has gradually gained research interest. In this study, conductive SiO2@Ag core-shell microspheres were synthesized and the influence of process parameters on their properties was evaluated. Subsequently, SiO2 and SiO2@Ag were used as dispersed phases to prepare two-phase STFs, the effect of the core-shell microspheres' proportion on the rheological properties of the STFs was investigated, and its mechanism was discussed. The results indicated that SiO2@Ag core-shell microspheres were coated with elemental silver and when the concentration of sodium hydroxide and glucose were 0.07 and 0.09 mol L-1, respectively, the coating surface was the most uniform and compact, and the conductivity reached the minimum value of 0.56 Ω cm. The two-phase STFs exhibited good and reversible shear thickening behaviors and the critical shear rate decreased with increasing core-shell microsphere concentration. Additionally, when the mass fraction of SiO2 and SiO2@Ag core-shell microspheres was 45% and 20%, respectively, the thickening rate was 325%, and the resistance of two-phase STFs decreased simultaneously with the emergence of shear thickening that reached the lowest value of 795.16 kΩ. This study provides a novel strategy for synthesizing conductive STFs for strain-sensing flexible stab-resistant composites.
RESUMEN
Magnetic nanoparticles are attracting significant attention for their wide application as biomaterials and magnetic storage materials. As an environmentally friendly adhesive, reactive polyurethane hot-melt adhesive (PUR) is a biocompatible polymer with a wide range of applications. In this paper, chitosan (CS)-surface-modified magnetic Fe3O4 nanoparticles were synthesized by the sol-gel method. Surface modification of the Fe3O4 nanoparticles with CS enhanced their mechanical properties in PUR. The nanoparticles were characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses, while their surface morphology was elucidated using scanning electron microscopy (SEM) and projection electron microscopy (TEM) techniques. Subsequently, PUR/CS-Fe3O4 magnetic nanocomposite films were prepared using an in situ method, wherein different amounts of CS-surface-modified magnetic Fe3O4 nanoparticles were doped into the PUR and coated on the films. The thermal, UV resistance and mechanical properties of the PUR/CS-Fe3O4 magnetic nanocomposite films were investigated by TGA, UV spectrometer and tensile testing. CS-Fe3O4 nanoparticles were successfully prepared using the sol-gel method and CS to modify the surface of the Fe3O4 nanoparticles. The results show that the mechanical properties and UV resistance of PUR/CS-Fe3O4 magnetic nanocomposites are improved by almost 50%, so the constructed PUR/CS-Fe3O4 magnetic nanocomposites have good UV-resistant properties and mechanical properties. The as-synthesized CS-Fe3O4 magnetic nanocomposites show great potential for application to mechanical and textile development.