RESUMEN
In this study, graphene oxide (GO) was modified via electrostatic interactions and chemical grafting by silica (SiO2), and two SiO2@GO hybrids (GO-A and GO-B, respectively) with different structures were obtained and carefully characterized. Results confirmed the successful grafting of SiO2 onto the GO surface using both strategies. The distribution of SiO2 particles on the surface of GO-A was denser and more agglomerated, while it was more uniform on the surface of GO-B. Then, epoxy resin (EP)/GO composites were prepared. The curing mechanism of EP/GO composites was studied by differential scanning calorimetry and in situ infrared spectra spectroscopy. Results of tensile tests, hardness tests, dynamic mechanical analysis, and dielectric measurement revealed that EP/GO-B exhibited the highest tensile properties, with a tensile strength of 79 MPa, a 43% increase compared to raw EP. Furthermore, the addition of fillers improved the hardness of EP, and EP/GO-B showed the highest energy storage modulus of 1900 MPa. The inclusion of SiO2@GO hybrid fillers enhanced the dielectric constant, volume resistivity, and breakdown voltage of EP/GO composites. Among these, EP/GO-B displayed the lowest dielectric loss, relatively good insulation, and relatively high volume resistivity and breakdown voltage. A related mechanism was proposed.
RESUMEN
Humic acid (HA) in makeup water is one of the important safety issues of high-parameter power plants. Herein, the Zr-based metal-organic frameworks (NH2-UiO-66) was applied to remove humic acid in water. The mesoporous of NH2-UiO-66 was controlled by surfactants sodium dodecyl benzene sulfonate (SDBS) to increase the adsorption of HA. The adsorption of HA at 25°C and pH 7 increased fast at the first 0.5 h and then gradually reached equilibrium after 10 h. The maximum adsorption capacity was 108.93 mg g-1, which removal efficiency was high as 95.0%. The morphology and adsorption properties of NH2-UiO-66 were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), surface charge, Fourier transform infrared (FT-IR), N2 adsorption-desorption, and adsorption test. The adsorption process of HA accorded with the pseudo-second-order kinetics, while the adsorption isotherm conformed to be the Langmuir model and the adsorption was proved to be monolayer adsorption. Adsorption was the spontaneous and endothermic process (ΔG°<0, ΔH°>0). The accessible surface area provided by mesopores on the 5 different Zr-MOFs was the reason for the enhanced HA adsorption capacity. These results provided useful information for effective HA removing and enhanced our understanding of the adsorption mechanism of HA on NH2-UiO-66.
