Betabox: a beta particle imaging system based on a position sensitive avalanche photodiode.

A beta camera has been developed that allows planar imaging of the spatial and temporal distribution of beta particles using a 14 × 14 mm(2) position sensitive avalanche photodiode (PSAPD). This camera system, which we call Betabox, can be directly coupled to microfluidic chips designed for cell incubation or other biological applications. Betabox allows for imaging the cellular uptake of molecular imaging probes labeled with charged particle emitters such as (18)F inside these chips. In this work, we investigate the quantitative imaging capabilities of Betabox for (18)F beta particles, in terms of background rate, efficiency, spatial resolution, and count rate. Measurements of background and spatial resolution are considered both at room temperature (21 °C ± 1 °C) and at an elevated operating temperature (37 °C ± 1 °C), as is often required for biological assays. The background rate measured with a 4 keV energy cutoff is below 2 cph mm(-2) at both 21 and 37 °C. The absolute efficiency of Betabox for the detection of (18)F positron sources in contact with a PSAPD with the surface passivated from ambient light and damage is 46% ± 1%. The lower detection limit is estimated using the Rose Criterion to be 0.2 cps mm(-2) for 1 min acquisitions and a 62 × 62 µm(2) pixel size. The upper detection limit is approximately 21 000 cps. The spatial resolution at both 21 and 37 °C ranges from 0.4 mm FWHM at the center of the field of view (FOV), and degrades to 1 mm at a distance of 5 mm away from center yielding a useful FOV of approximately 10 × 10 mm(2). We also investigate the effects on spatial resolution and sensitivity that result from the use of a polymer based microfluidic chip. For these studies we place varying layers of low-density polyethylene (LDPE) between the detector and the source and find that the spatial resolution degrades by ∼180 µm for every 100 µm of LDPE film. Sensitivity is reduced by half with the inclusion of ∼200 µm of additional LDPE film. Lastly, we demonstrate the practical utilization of Betabox, with an imaging test of its linearity, when coupled to a polydimethylsiloxane microfluidic chip designed for cell based assays.

Maximal entropy inference of oncogenicity from phosphorylation signaling.

Point mutations in the phosphorylation domain of the Bcr-Abl fusion oncogene give rise to drug resistance in chronic myelogenous leukemia patients. These mutations alter kinase-mediated signaling function and phenotypic outcome. An information theoretic analysis of the correlation of phosphoproteomic profiling and transformation potency of the oncogene in different mutants is presented. The theory seeks to predict the leukemic transformation potency from the observed signaling by constructing a distribution of maximal entropy of site-specific phosphorylation events. The theory is developed with special reference to systems biology where high throughput measurements are typical. We seek sets of phosphorylation events most contributory to predicting the phenotype by determining the constraints on the signaling system. The relevance of a constraint is measured by how much it reduces the value of the entropy from its global maximum, where all events are equally likely. Application to experimental phospho-proteomics data for kinase inhibitor-resistant mutants shows that there is one dominant constraint and that other constraints are not relevant to a similar extent. This single constraint accounts for much of the correlation of phosphorylation events with the oncogenic potency and thereby usefully predicts the trends in the phenotypic output. An additional constraint possibly accounts for biological fine structure.

Electrical addressing of confined quantum systems for quasiclassical computation and finite state logic machines.

Conduction spectroscopy measures the current I through a nanosystem as a function of the voltage V between two electrodes. The differential conductance, dI/dV, has peaks that can be assigned to resonance conditions with different electronic levels of the system. Between these increments, the current has roughly constant plateaus. We discuss how measurements of the current vs. voltage can be used to perform Boolean operations and hence construct finite state logic machines and combinational circuits. The inputs to the device are the source-drain voltage, including its sign, and a gate voltage applied in a manner analogous to optical Stark spectroscopy. As simple examples, we describe a two-state set-reset machine (a machine whose output depends on the input and also on its present state) and a full adder circuit (a circuit that requires three inputs and provides two outputs).

Quantum dot artificial solids: understanding the static and dynamic role of size and packing disorder.

This perspective examines quantum dot (QD) superlattices as model systems for achieving a general understanding of the electronic structure of solids and devices built from nanoscale components. QD arrays are artificial two-dimensional solids, with novel optical and electric properties, which can be experimentally tuned. The control of the properties is primarily by means of the selection of the composition and size of the individual QDs and secondly, through their packing. The freedom of the architectural design is constrained by nature insisting on diversity. Even the best synthesis and separation methods do not yield dots of exactly the same size nor is the packing in the self-assembled array perfectly regular. A series of experiments, using both spectroscopic and electrical probes, has characterized the effects of disorder for arrays of metallic dots. We review these results and the corresponding theory. In particular, we discuss temperature-dependent transport experiments as the next step in the characterization of these arrays.

Molecular-based electronically switchable tunnel junction devices.

Solid-state tunnel junction devices were fabricated from Langmuir Blodgett molecular monolayers of a bistable [2]catenane, a bistable [2]pseudorotaxane, and a single-station [2]rotaxane. All devices exhibited a (noncapacitive) hysteretic current-voltage response that switched the device between high- and low-conductivity states, although control devices exhibited no such response. Correlations between the structure and solution-phase dynamics of the molecular and supramolecular systems, the crystallographic domain structure of the monolayer film, and the room-temperature device performance characteristics are reported.

Bilayer reconstitution of voltage-dependent ion channels using a microfabricated silicon chip.

Painted bilayers containing reconstituted ion channels serve as a well defined model system for electrophysiological investigations of channel structure and function. Horizontally oriented bilayers with easy solution access to both sides were obtained by painting a phospholipid:decane mixture across a cylindrical pore etched into a 200-microm thick silicon wafer. Silanization of the SiO(2) layer produced a hydrophobic surface that promoted the adhesion of the lipid mixture. Standard lithographic techniques and anisotropic deep-reactive ion etching were used to create pores with diameters from 50 to 200 microm. The cylindrical structure of the pore in the partition and the surface treatment resulted in stable bilayers. These were used to reconstitute Maxi K channels in the 100- and 200-microm diameter pores. The electrophysiological characteristics of bilayers suspended in microchips were comparable with that of other bilayer preparations. The horizontal orientation and good voltage clamping properties make the microchip bilayer method an excellent system to study the electrical properties of reconstituted membrane proteins simultaneously with optical probes.

Switching devices based on interlocked molecules.

An architectural rationale and an experimental program aimed at the development of molecular electronics switching devices for memory and computing applications are discussed. Two-terminal molecular switch tunnel junctions are identified as the critical device components of molecular electronics-based circuitry. They can be tiled in two dimensions and are tolerant of manufacturing defects. Singly and multiply configurable solid-state switching devices that are based upon electrochemically switchable molecular and supramolecular systems are discussed in terms of both the synthesis of the molecular components and the fabrication and performance of the devices.

Initial prosthetic treatment.

This article describes measures designed to provide short-term solutions to existing RPD problems and to establish an optimum oral environment for the provision of definitive prostheses.

Tooth preparation.

This final article in the series describes the modification of teeth to improve their shape for the support and retention of RPDs.

Connectors.

This article describes the types and functions of connectors for RPDS. It also considers the relative merits and limitations of these connectors.

Indirect retention.

This article explains the mechanism of indirect retention for RPDs and discusses the factors which determine its effectiveness. Examples are given of designs which incorporate indirect retention.

Communication between the dentist and the dental technician.

Factors contributing to good RPD design are described, including the respective inputs of the dentist and dental technician. Poor communication in current practice is reported and an appropriate format for a work authorization presented.

The removable partial denture equation.

This article describes the benefits and risks of providing RPDs. It emphasises the importance of co-operation between the dental team and patient to ensure that the balance of this 'equation' is in the patient's favour.

Removable partial dentures. 1. Need and demand for treatment.

This article considers first, factors influencing the need and demand for removable partial dentures (RPDs) and second, the particular requirements and problems of elderly patients related to such treatment.

Chick pineal melatonin synthesis: light and cyclic AMP control abundance of serotonin N-acetyltransferase protein.

Melatonin production in the pineal gland is high at night and low during the day. This rhythm reflects circadian changes in the activity of serotonin N-acetyltransferase [arylalkylamine N-acetyltransferase (AA-NAT); EC 2.3.1.87], the penultimate enzyme in melatonin synthesis. The rhythm is generated by an endogenous circadian clock. In the chick, a clock is located in the pinealocyte, which also contains two phototransduction systems. One controls melatonin production by adjusting the clock and the other acts distal to the clock, via cyclic AMP mechanisms, to switch melatonin synthesis on and off. Unlike the clock in these cells, cyclic AMP does not appear to regulate activity by altering AA-NAT mRNA levels. The major changes in AA-NAT mRNA levels induced by the clock seemed likely (but not certain) to generate comparable changes in AA-NAT protein levels and AA-NAT activity. Cyclic AMP might also regulate AA-NAT activity via changes in protein levels, or it might act via other mechanisms, including posttranslational changes affecting activity. We measured AA-NAT protein levels and enzyme activity in cultured chick pineal cells and found that they correlated well under all conditions. They rose and fell spontaneously with a circadian rhythm. They also rose in response to agents that increase cyclic AMP. They were raised by agents that increase cyclic AMP, such as forskolin, and lowered by agents that decrease cyclic AMP, such as light and norepinephrine. Thus, both the clock and cyclic AMP can control AA-NAT activity by altering the total amount of AA-NAT protein. Effects of proteosomal proteolysis inhibitors suggest that changes in AA-NAT protein levels, in turn, reflect changes in the rate at which the protein is destroyed by proteosomal proteolysis. It is likely that cyclic AMP-induced changes in AA-NAT protein levels mediate rapid changes in chick pineal AA-NAT activity. Our results indicate that light can rapidly regulate the abundance of a specific protein (AA-NAT) within a photoreceptive cell.