Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals.

Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.

A detailed molecular network map and model of the NLRP3 inflammasome.

The NLRP3 inflammasome is a key regulator of inflammation that responds to a broad range of stimuli. The exact mechanism of activation has not been determined, but there is a consensus on cellular potassium efflux as a major common denominator. Once NLRP3 is activated, it forms high-order complexes together with NEK7 that trigger aggregation of ASC into specks. Typically, there is only one speck per cell, consistent with the proposal that specks form - or end up at - the centrosome. ASC polymerisation in turn triggers caspase-1 activation, leading to maturation and release of IL-1ß and pyroptosis, i.e., highly inflammatory cell death. Several gain-of-function mutations in the NLRP3 inflammasome have been suggested to induce spontaneous activation of NLRP3 and hence contribute to development and disease severity in numerous autoinflammatory and autoimmune diseases. Consequently, the NLRP3 inflammasome is of significant clinical interest, and recent attention has drastically improved our insight in the range of involved triggers and mechanisms of signal transduction. However, despite recent progress in knowledge, a clear and comprehensive overview of how these mechanisms interplay to shape the system level function is missing from the literature. Here, we provide such an overview as a resource to researchers working in or entering the field, as well as a computational model that allows for evaluating and explaining the function of the NLRP3 inflammasome system from the current molecular knowledge. We present a detailed reconstruction of the molecular network surrounding the NLRP3 inflammasome, which account for each specific reaction and the known regulatory constraints on each event as well as the mechanisms of drug action and impact of genetics when known. Furthermore, an executable model from this network reconstruction is generated with the aim to be used to explain NLRP3 activation from priming and activation to the maturation and release of IL-1ß and IL-18. Finally, we test this detailed mechanistic model against data on the effect of different modes of inhibition of NLRP3 assembly. While the exact mechanisms of NLRP3 activation remains elusive, the literature indicates that the different stimuli converge on a single activation mechanism that is additionally controlled by distinct (positive or negative) priming and licensing events through covalent modifications of the NLRP3 molecule. Taken together, we present a compilation of the literature knowledge on the molecular mechanisms on NLRP3 activation, a detailed mechanistic model of NLRP3 activation, and explore the convergence of diverse NLRP3 activation stimuli into a single input mechanism.

Silica Exposure and Cardiovascular, Cerebrovascular, and Respiratory Morbidity in a Cohort of Male Swedish Iron Foundry Workers.

OBJECTIVE: We present quantitative exposure-response data on silica exposure in male Swedish iron foundry workers for cardiovascular, cerebrovascular, and respiratory morbidity. METHODS: This research is a cohort study of 2063 male Swedish iron foundry workers. From the Swedish National Patient Registers, data on morbidity incidence were retrieved. A historical measurement database of 1667 respirable silica exposure measurements from 10 Swedish iron foundries was used to calculate the cumulative exposure dose for each worker. RESULTS: Increased morbidity risk for the whole group of foundry workers was determined for ischemic heart disease, cerebrovascular disease, chronic obstructive pulmonary disease (COPD), bronchitis, and pneumonia. In addition, an increased risk for COPD at cumulative silica exposures ranging from 0.11 to 0.84 mg/m 3 year is presented. CONCLUSIONS: The study presents a significantly increased COPD risk at cumulative silica exposures below the Swedish occupational exposure limit.

NLRP3 inflammasome as a sensor of micro- and nanoplastics immunotoxicity.

Micro- and nanoplastics (MNPs) are emerging pollutants with scarcely investigated effects on human innate immunity. If they follow a similar course of action as other, more thoroughly investigated particulates, MNPs may penetrate epithelial barriers, potentially triggering a cascade of signaling events leading to cell damage and inflammation. Inflammasomes are intracellular multiprotein complexes and stimulus-induced sensors critical for mounting inflammatory responses upon recognition of pathogen- or damage-associated molecular patterns. Among these, the NLRP3 inflammasome is the most studied in terms of activation via particulates. However, studies delineating the ability of MNPs to affect NLRP3 inflammasome activation are still rare. In this review, we address the issue of MNPs source and fate, highlight the main concepts of inflammasome activation via particulates, and explore recent advances in using inflammasome activation for assessment of MNP immunotoxicity. We also discuss the impact of co-exposure and MNP complex chemistry in potential inflammasome activation. Development of robust biological sensors is crucial in order to maximize global efforts to effectively address and mitigate risks that MNPs pose for human health.

Occupational quartz and particle exposure affect systemic levels of inflammatory markers related to inflammasome activation and cardiovascular disease.

BACKGROUND: The inflammatory responses are central components of diseases associated with particulate matter (PM) exposure, including systemic diseases such as cardiovascular diseases (CVDs). The aim of this study was to determine if exposure to PM, including respirable dust or quartz in the iron foundry environment mediates systemic inflammatory responses, focusing on the NLRP3 inflammasome and novel or established inflammatory markers of CVDs. METHODS: The exposure to PM, including respirable dust, metals and quartz were determined in 40 foundry workers at two separate occasions per worker. In addition, blood samples were collected both pre-shift and post-shift and quantified for inflammatory markers. The respirable dust and quartz exposures were correlated to levels of inflammatory markers in blood using Pearson, Kendall τ and mixed model statistics. Analyzed inflammatory markers included: 1) general markers of inflammation, including interleukins, chemokines, acute phase proteins, and white blood cell counts, 2) novel or established inflammatory markers of CVD, such as growth/differentiation factor-15 (GDF-15), CD40 ligand, soluble suppressor of tumorigenesis 2 (sST2), intercellular/vascular adhesion molecule-1 (ICAM-1, VCAM-1), and myeloperoxidase (MPO), and 3) NLRP3 inflammasome-related markers, including interleukin (IL)-1ß, IL-18, IL-1 receptor antagonist (IL-1Ra), and caspase-1 activity. RESULTS: The average respirator adjusted exposure level to respirable dust and quartz for the 40 foundry workers included in the study was 0.65 and 0.020 mg/m3, respectively. Respirable quartz exposure correlated with several NLRP3 inflammasome-related markers, including plasma levels of IL-1ß and IL-18, and several caspase-1 activity measures in monocytes, demonstrating a reverse relationship. Respirable dust exposure mainly correlated with non-inflammasome related markers like CXCL8 and sST2. CONCLUSIONS: The finding that NLRP3 inflammasome-related markers correlated with PM and quartz exposure suggest that this potent inflammatory cellular mechanism indeed is affected even at current exposure levels in Swedish iron foundries. The results highlight concerns regarding the safety of current exposure limits to respirable dust and quartz, and encourage continuous efforts to reduce exposure in dust and quartz exposed industries.

A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles.

Additive manufacturing (AM) or industrial 3D printing uses cutting-edge technologies and materials to produce a variety of complex products. However, the effects of the unintentionally emitted AM (nano)particles (AMPs) on human cells following inhalation, require further investigations. The physicochemical characterization of the AMPs, extracted from the filter of a Laser Powder Bed Fusion (L-PBF) 3D printer of iron-based materials, disclosed their complexity, in terms of size, shape, and chemistry. Cell Painting, a high-content screening (HCS) assay, was used to detect the subtle morphological changes elicited by the AMPs at the single cell resolution. The profiling of the cell morphological phenotypes, disclosed prominent concentration-dependent effects on the cytoskeleton, mitochondria, and the membranous structures of the cell. Furthermore, lipidomics confirmed that the AMPs induced the extensive membrane remodeling in the lung epithelial and macrophage co-culture cell model. To further elucidate the biological mechanisms of action, the targeted metabolomics unveiled several inflammation-related metabolites regulating the cell response to the AMP exposure. Overall, the AMP exposure led to the internalization, oxidative stress, cytoskeleton disruption, mitochondrial activation, membrane remodeling, and metabolic reprogramming of the lung epithelial cells and macrophages. We propose the approach of integrating Cell Painting with metabolomics and lipidomics, as an advanced nanosafety methodology, increasing the ability to capture the cellular and molecular phenotypes and the relevant biological mechanisms to the (nano)particle exposure.

Particle Safety Assessment in Additive Manufacturing: From Exposure Risks to Advanced Toxicology Testing.

Additive manufacturing (AM) or industrial three-dimensional (3D) printing drives a new spectrum of design and production possibilities; pushing the boundaries both in the application by production of sophisticated products as well as the development of next-generation materials. AM technologies apply a diversity of feedstocks, including plastic, metallic, and ceramic particle powders with distinct size, shape, and surface chemistry. In addition, powders are often reused, which may change the particles' physicochemical properties and by that alter their toxic potential. The AM production technology commonly relies on a laser or electron beam to selectively melt or sinter particle powders. Large energy input on feedstock powders generates several byproducts, including varying amounts of virgin microparticles, nanoparticles, spatter, and volatile chemicals that are emitted in the working environment; throughout the production and processing phases. The micro and nanoscale size may enable particles to interact with and to cross biological barriers, which could, in turn, give rise to unexpected adverse outcomes, including inflammation, oxidative stress, activation of signaling pathways, genotoxicity, and carcinogenicity. Another important aspect of AM-associated risks is emission/leakage of mono- and oligomers due to polymer breakdown and high temperature transformation of chemicals from polymeric particles, both during production, use, and in vivo, including in target cells. These chemicals are potential inducers of direct toxicity, genotoxicity, and endocrine disruption. Nevertheless, understanding whether AM particle powders and their byproducts may exert adverse effects in humans is largely lacking and urges comprehensive safety assessment across the entire AM lifecycle-spanning from virgin and reused to airborne particles. Therefore, this review will detail: 1) brief overview of the AM feedstock powders, impact of reuse on particle physicochemical properties, main exposure pathways and protective measures in AM industry, 2) role of particle biological identity and key toxicological endpoints in the particle safety assessment, and 3) next-generation toxicology approaches in nanosafety for safety assessment in AM. Altogether, the proposed testing approach will enable a deeper understanding of existing and emerging particle and chemical safety challenges and provide a strategy for the development of cutting-edge methodologies for hazard identification and risk assessment in the AM industry.

Green, Black and Rooibos Tea Inhibit Prostaglandin E2 Formation in Human Monocytes by Inhibiting Expression of Enzymes in the Prostaglandin E2 Pathway.

The formation of prostaglandin E2 (PGE2) is associated with adverse inflammatory effects. However, long-term treatment with nonsteroidal anti-inflammatory drugs (NSAIDs) comes with risk of severe side effects. Therefore, alternative ways to inhibit PGE2 are warranted. We have investigated the effects of tea extracts and the polyphenols epigallocatechin gallate (EGCG) and quercetin on PGE2 formation, determined by immunoassay, and protein expression, determined by immunoblotting, of cytosolic phospholipase A2 (cPLA2), cyclooxygenase 2 (COX-2) and microsomal PGE synthase-1 (mPGES-1) in human monocytes. Green and black tea extracts, and with a lower potency, Rooibos tea extract, inhibited lipopolysaccharide (LPS) and calcium ionophore-induced PGE2 formation. In addition, all tea extracts inhibited the LPS-induced expression of mPGES-1, and the green and black tea extracts also inhibited, to a lesser extent, COX-2 expression. The tea extracts only marginally reduced cPLA2 expression and had no effect on COX-1 expression. EGCG, present in green and black tea, and quercetin, present in all three teas, also inhibited PGE2 formation and expression of mPGES-1, COX-2 and cPLA2. Cell-based and cell-free assays were also performed to evaluate direct effects on the enzymatic activity of COX and PGE synthases. Mainly, the cell-free assay demonstrated partial inhibition by the tea extracts and polyphenols. However, the inhibition required higher doses compared to the effects demonstrated on protein expression. In conclusion, green and black tea, and to a lesser extent Rooibos tea, are potent inhibitors of PGE2 formation in human monocytes, and mediate their effects by inhibiting the expression of the enzymes responsible for PGE2 formation, especially mPGES-1.

Effects on white blood cell counts and the NLRP3 inflammasome due to dust and cobalt exposure in the hard metal industry.

INTRODUCTION: In light of potential negative health effects of cobalt exposure, a characterization of inflammatory mechanisms in exposed individuals is warranted. The current study investigated cobalt exposure in the Swedish hard metal industry and its relationship to inflammatory markers, including NLRP3 inflammasome activation and white blood cell (WBC) counts. MATERIALS AND METHODS: Inhalable cobalt and dust exposures, and systemic cobalt levels, were determined for 72 workers in the hard metal industry and linear regression models were applied to correlate exposure to markers of inflammasome activation and WBC counts. RESULTS: Mean exposures to inhalable dust (0.11 mg/m3) and cobalt (0.0034 mg/m3) were below the Swedish occupational exposure limits, and these low exposures did not correlate with any investigated outcomes. Instead, cobalt blood levels significantly correlated with a ca 10% decrease in IL-18 plasma levels per 10 nM cobalt increase. Furthermore, pre-shift cobalt blood and/or urine levels significantly correlated with some WBC measures, including decreased neutrophil-to-lymphocyte ratio, increased lymphocyte-to-monocyte ratio, and lymphocyte counts. CONCLUSION: The low inhalable particle exposures had no impact on WBC counts and inflammasome activation. Instead, systemic cobalt levels, which also include skin exposure, demonstrated possible suppressive effects on inflammatory responses in cobalt-exposed individuals in the hard metal industry.

Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area air concentrations in the Swedish hard metal industry, in particular to cobalt.

PURPOSE: To study the relationship between inhalation of airborne particles and cobalt in the Swedish hard metal industry and markers of inflammation and coagulation in blood. METHODS: Personal sampling of inhalable cobalt and dust were performed for subjects in two Swedish hard metal plants. Stationary measurements were used to study concentrations of inhalable, respirable, and total dust and cobalt, PM10 and PM2.5, the particle surface area and the particle number concentrations. The inflammatory markers CC16, TNF, IL-6, IL-8, IL-10, SAA and CRP, and the coagulatory markers FVIII, vWF, fibrinogen, PAI-1 and D-dimer were measured. A complete sampling was performed on the second or third day of a working week following a work-free weekend, and additional sampling was taken on the fourth or fifth day. The mixed model analysis was used, including covariates. RESULTS: The average air concentrations of inhalable dust and cobalt were 0.11 mg/m3 and 0.003 mg/m3, respectively. For some mass-based exposure measures of cobalt and total dust, statistically significant increased levels of FVIII, vWF and CC16 were found. CONCLUSIONS: The observed relationships between particle exposure and coagulatory biomarkers may indicate an increased risk of cardiovascular disease.

Respiratory Health and Inflammatory Markers-Exposure to Cobalt in the Swedish Hard Metal Industry.

OBJECTIVE: To study the relationship between inhalable dust and cobalt, and respiratory symptoms, lung function, exhaled nitric oxide in expired air, and CC16 in the Swedish hard metal industry. METHODS: Personal sampling of inhalable dust and cobalt, and medical examination including blood sampling was performed for 72 workers. Exposure-response relationships were determined using logistic, linear, and mixed-model analysis. RESULTS: The average inhalable dust and cobalt concentrations were 0.079 and 0.0017 mg/m, respectively. Statistically significant increased serum levels of CC16 were determined when the high and low cumulative exposures for cobalt were compared. Nonsignificant exposure-response relationships were observed between cross-shift inhalable dust or cobalt exposures and asthma, nose dripping, and bronchitis. CONCLUSIONS: Our findings suggest an exposure-response relationship between inhalable cumulative cobalt exposure and CC16 levels in blood, which may reflect an injury or a reparation process in the lungs.

Quartz Dust Exposure Affects NLRP3 Inflammasome Activation and Plasma Levels of IL-18 and IL-1Ra in Iron Foundry Workers.

PURPOSE: To study the association between inhalation of particulate matter or quartz in Swedish iron foundries and the effects on NLRP3 inflammasome activation. METHODS: Particle exposure measurements were performed during an eight-hour work day for 85 foundry workers at three Swedish iron foundries. Personal sampling was used for measurement of respirable quartz and dust and stationary measurements to obtain exposure measurements for inhalable dust and PM10. The NLRP3 inflammasome markers, interleukin- (IL-) 1ß and IL-18, and inhibitors IL-1 receptor antagonist (IL-1Ra) and IL-18 binding protein (IL-18BP) were measured in plasma. Inflammasome activation was measured by caspase-1 enzymatic activity in monocytes in whole blood by flow cytometry, and expression of inflammasome-related genes was quantified using real-time PCR. Multiple linear regression analysis was used to investigate associations between PM exposures and inflammatory markers. Sex, age, smoking, current infection, BMI, and single nucleotide polymorphism in the inflammasome regulating genes CARD8 (C10X) and NLRP3 (Q705K) were included as covariates. RESULTS: The average exposure levels of respirable dust and quartz were 0.85 and 0.052 mg/m3, respectively. A significant exposure-response was found for respirable dust and IL-18 and for inhalable dust and IL-1Ra. Whole blood, drawn from study participants, was stimulated ex vivo with inflammasome priming stimuli LPS or Pam3CSK4, resulting in a 47% and 49% increase in caspase-1 enzymatic activity in monocytes. This increase in caspase-1 activity was significantly attenuated in the higher exposure groups for most PM exposure measures. CONCLUSIONS: The results indicate that exposure levels of PM in the iron foundry environment can affect the NLRP3 inflammasome and systemic inflammation.

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

PURPOSE: To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP. METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on the second or third day of a working week after a work free weekend, with additional sampling on the fourth or fifth day. Logistic, linear and mixed model analyses were performed including, gender, age, smoking, infections, sampling day, body mass index (BMI) and chemical binders as covariates. RESULTS: The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increases in levels of CC16 were associated with exposure to chemical binders (p = 0.05; p = 0.01) in the regression analysis of quartz and respirable dust, respectively. Non-significant exposure-responses were identified for cumulative quartz and the symptoms asthma and breathlessness. For cumulative chemical years, non-significant exposure-response were observed for all but two symptoms. FENO also exhibited a non significant exposure-response for both quartz and respirable dust. No exposure-response was determined for FEV1 or FVC, CRP and respirable dust and quartz. CONCLUSIONS: Our findings suggest that early markers of pulmonary effect, such as increased levels of CC16 and FENO, are more strongly associated with chemical binder exposure than respirable quartz and dust in foundry environments.

Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area air concentrations in Swedish iron foundries, in particular respirable quartz.

PURPOSE: To study the relationship between inhalation of airborne particles and quartz in Swedish iron foundries and markers of inflammation and coagulation in blood. METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Stationary measurements were used to study the concentrations of respirable dust and quartz, inhalable and total dust, PM10 and PM2.5, as well as the particle surface area and the particle number concentrations. Markers of inflammation, namely interleukins (IL-1ß, IL-6, IL-8, IL-10 and IL-12), C-reactive protein, and serum amyloid A (SAA) were measured in plasma or serum, together with markers of coagulation including fibrinogen, factor VIII (FVIII), von Willebrand factor and D-dimer. Complete sampling was performed on the second or third day of a working week after a work-free weekend, and follow-up samples were collected 2 days later. A mixed model analysis was performed including sex, age, smoking, infections, blood group, sampling day and BMI as covariates. RESULTS: The average 8-h time-weighted average air concentrations of respirable dust and quartz were 0.85 mg/m3 and 0.052 mg/m3, respectively. Participants in high-exposure groups with respect to some of the measured particle types exhibited significantly elevated levels of SAA, fibrinogen and FVIII. CONCLUSIONS: These observed relationships between particle exposure and inflammatory markers may indicate an increased risk of cardiovascular disease among foundry workers with high particulate exposure.

Effect of macrophages on breast cancer cell proliferation, and on expression of hormone receptors, uPAR and HER-2.

Malignant tumors, including breast cancers, are frequently infiltrated with innate immune cells and tumor-associated macrophages (TAMs) represent the major inflammatory component in stroma of many tumors. In this study, we examined the immunoreactivity of the macrophage markers CD68 and CD163 as well as the hormone receptors estrogen receptor α (ERα), progesterone receptor (PR), estrogen receptor ß1 (ERß1), human epidermal growth factor receptor 2 (HER-2), matrix metalloproteinase 9 (MMP­9), urokinase-type plasminogen activator receptor (uPAR) and the proliferations marker Ki67 in 17 breast cancer biopsies. The quantitative score for CD68+ and CD163+ strongly indicate M2 phenotype dominance in the currently investigated biopsies. We found that an increasing level of macrophages was negatively associated with ERα or PR, whereas a positive association was observed for Ki-67 or uPAR. No significant association could be seen between the level of macrophage and HER-2, ERß1 or MMP-9 expression. Effect of conditioned media (CM) generated from cultured human M1 and M2 macrophage phenotypes were investigated on the proliferation and expression of selected markers in the T47D breast cancer cell line. We found that in contrast to the in vivo situation, in particularly the CM from M1 macrophages decreased the growth and Ki67 expression in T47D, and significantly increased ERß1 mRNA levels. Moreover, in accordance to the in vivo situation the CM from the macrophages decreased the expression of ERα protein as well as ERα or PR mRNA. In conclusion our results show that macrophages alone have the capability to decrease the tumor cell expression of ERα and PR in vitro. In the tumor environment in vivo macrophages also contribute to an increase in tumor cell expression of uPAR and Ki67, suggesting that macrophages are involved in impairing the prognosis for breast cancer patients.

Macrophages of M1 phenotype have properties that influence lung cancer cell progression.

Stromal macrophages of different phenotypes can contribute to the expression of proteins that affects metastasis such as urokinase-type plasminogen activator (uPA), its receptor uPAR, and plasminogen activator inhibitor-1 (PAI-1), but knowledge of how essential their contribution is in comparison to the cancer cells in small cell lung cancer (SCLC) and lung squamous cell carcinoma (SCC) is lacking. The expression of uPA, uPAR, and PAI-1 and of the matrix metalloproteinases (MMP)-2 and MMP-9 were studied in human macrophages of M1 and M2 phenotype and compared to a lung SCC (NCI-H520) and a SCLC (NCI-H69) cell line. Effects of treatment with conditioned media (CM) from M1 and M2 macrophages on the expression of these genes in H520 and H69 cells as well as effects on the cell growth were investigated. In addition, data on the stromal macrophages immunoreactivity of uPAR, MMP-2, and MMP-9 in a few SCC and SCLC biopsies was included. uPAR, MMP-2, and MMP-9 were confirmed in stromal cells including macrophages in the SCC and SCLC biopsies. In vitro, both macrophage phenotypes expressed considerably higher mRNA levels of uPA, uPAR, PAI-1, and MMP-9 compared to the cancer cell lines, and regarding uPAR, the highest level was found in the M1 macrophage phenotype. Furthermore, M1 CM treatment not only induced an upregulation of PAI-1 in both H520 and H69 cells but also inhibited cell growth in both cell lines, giving M1 macrophages both tumor-promoting and tumor-killing potential.

Conditioned media from human macrophages of M1 phenotype attenuate the cytotoxic effect of 5­fluorouracil on the HT­29 colon cancer cell line.

Resistance of tumor cells to chemotherapy, such as 5­fluorouracil (5­FU), is an obstacle for successful treatment of cancer. As a follow­up of a previous study we have investigated the effect of conditioned media (CM) from macrophages of M1 or M2 phenotypes on 5­FU cytotoxicity on the colon cancer cell lines HT­29 and CACO­2. HT­29 cells, but not CACO­2 cells, having been treated with a combination of M1 CM and 5­FU recovered their cell growth to a much larger extent compared to cells having been treated with 5­FU alone when further cultured for 7 days in fresh media. M1 CM treatment of HT­29, but not CACO­2 cells, induced cell cycle arrest in the G0/G1 and G2/M phases. 5­FU treatment induced accumulation of cells in S­phase in both HT­29 and CACO­2 cells. This accumulation of cells in S­phase was attenuated by combined M1 CM and 5­FU treatment in HT­29 cells, but not in CACO­2 cells. The mRNA expression of cell cycle regulatory proteins and 5­FU metabolic enzymes were analyzed in an attempt to find possible mechanisms for the M1 CM induced attenuation of 5­FU cytotoxicity in HT­29. Thymidylate synthetase (TS) and thymidine phosphorylase (TP) were found to be substantially downregulated and upregulated, respectively, in HT­29 cells treated with M1 CM, making them unlikely as mediators of reduced 5­FU cytotoxicity. Among cell cycle regulating proteins, p21 was induced in HT­29 cells, but not in CACO­2 cells, in response to M1 CM treatment. However, small interfering RNA (siRNA) knockdown of p21 had no effect on the M1 CM induced cell cycle arrest seen in HT­29 and neither did it change the growth recovery after combined treatment of HT­29 cells with M1 CM and 5­FU. In conclusion, treatment of HT­29 cells with M1 CM reduces the cytotoxic effect of 5­FU and this is mediated by a M1 CM induced cell cycle arrest in the G0/G1 and G2/M phases. So far, we lack an explanation why this action is absent in the CACO­2 cells. The current findings may be important for optimization of chemotherapy in colon cancer.