Synthesis of Plasmonically Active Titanium Nitride Using a Metallic Alloy Buffer Layer Strategy.

Titanium nitride (TiN) has emerged as a highly promising alternative to traditional plasmonic materials. This study focuses on the inclusion of a Cr90Ru10 buffer layer between the substrate and thin TiN film, which enables the use of cost-effective, amorphous technical substrates while preserving high film quality. We report best-in-class TiN thin films fabricated on fused silica wafers, achieving a maximum plasmonic figure of merit, -ϵ'/ϵ″, of approximately 2.8, even at a modest wafer temperature of around 300 °C. Furthermore, we delve into the characterization of TiN thin film quality and fabricated TiN triangular nanostructures, employing attenuated total reflectance and cathodoluminescence techniques to highlight their potential applications in surface plasmonics.

Transition Metal Synthetic Ferrimagnets: Tunable Media for All-Optical Switching Driven by Nanoscale Spin Current.

All-optical switching of magnetization has great potential for use in future ultrafast and energy efficient nanoscale magnetic storage devices. So far, research has been almost exclusively focused on rare-earth based materials, which limits device tunability and scalability. Here, we show that a perpendicularly magnetized synthetic ferrimagnet composed of two distinct transition metal ferromagnetic layers, Ni3Pt and Co, can exhibit helicity independent magnetization switching. Switching occurs between two equivalent remanent states with antiparallel alignment of the Ni3Pt and Co magnetic moments and is observable over a broad temperature range. Time-resolved measurements indicate that the switching is driven by a spin-polarized current passing through the subnanometer Ir interlayer. The magnetic properties of this model system may be tuned continuously via subnanoscale changes in the constituent layer thicknesses as well as growth conditions, allowing the underlying mechanisms to be elucidated and paving the way to a new class of data storage devices.

Strong Coupling of Carbon Quantum Dots in Plasmonic Nanocavities.

Confining light in extremely small cavities is crucial in nanophotonics, central to many applications. Employing a unique nanoparticle-on-mirror plasmonic structure and using a graphene film as a spacer, we create nanoscale cavities with volumes of only a few tens of cubic nanometers. The ultracompact cavity produces extremely strong optical near-fields, which facilitate the formation of single carbon quantum dots in the cavity and simultaneously empower the strong coupling between the excitons of the formed carbon quantum dot and the localized surface plasmons. This is manifested in the optical scattering spectra, showing a magnificent Rabi splitting of up to 200 meV under ambient conditions. In addition, we demonstrate that the strong coupling is tuneable with light irradiation. This opens new paradigms for investigating the fundamental light emission properties of carbon quantum dots in the quantum regime and paves the way for many significant applications.

Customizing the reduction of individual graphene oxide flakes for precise work function tuning with meV precision.

Being able to precisely control the reduction of two-dimensional graphene oxide films will open exciting opportunities for tailor-making the functionality of nanodevices with on-demand properties. Here we report the meticulously controlled reduction of individual graphene oxide flakes ranging from single to seven layers through controlled laser irradiation. It is found that the reduction can be customized in such a precise way that the film thickness can be accurately thinned with sub-nanometer resolution, facilitated by extraordinary temperature gradients >102 K nm-1 across the interlayers of graphene oxide films. Such precisely controlled reduction provides important pathways towards precision nanotechnology with custom-designed electrical, thermal, optical and chemical properties. We demonstrate that this can be exploited to fine tune the work function of graphene oxide films with unprecedented precision of only a few milli electronvolts.

Achieving extremely high optical contrast of atomically-thin MoS2.

Extraordinarily high optical contrast is instrumental to research and applications of two-dimensional materials, such as, for rapid identification of thickness, characterisation of optical properties, and quality assessment. With optimal designs of substrate structures and light illumination conditions, unprecedented optical contrast of MoS2 on Au surfaces exceeding 430% for monolayer and over 2600% for bilayer is achieved. This is realised on custom-designed substrates of near-zero reflectance near the normal incidence. In particular, by using an aperture stop to restrict the angle of incidence, high-magnification objectives can be made to achieve extraordinarily high optical contrast in a similar way as the low-magnification objectives, but still retaining the high spatial resolution capability. The technique will allow small flakes of micrometre size to be located easily and identified with great accuracy, which will have significant implications in many applications.

Mechanism of Gold-Assisted Exfoliation of Centimeter-Sized Transition-Metal Dichalcogenide Monolayers.

Exfoliation of large-area monolayers is important for fundamental research and technological implementation of transition-metal dichalcogenides. Various techniques have been explored to increase the exfoliation yield, but little is known about the underlying mechanism at the atomic level. Here, we demonstrate gold-assisted mechanical exfoliation of monolayer molybdenum disulfide, up to a centimeter scale. Detailed spectroscopic, microscopic, and first-principles density functional theory analyses reveal that strong van der Waals (vdW) interaction between Au and the topmost MoS2 layer facilitates the exfoliation of monolayers. However, the large-area exfoliation promoted by such strong vdW interaction is only achievable on freshly prepared clean and smooth Au surfaces, while rough surfaces and surfaces exposed to air for more than 15 min result in negligible exfoliation yields. This technique is successfully extended to MoSe2, WS2, WSe2, MoTe2, WTe2, and GaSe. In addition, electrochemical characterization reveals intriguing interactions between monolayer MoS2 and Au. A subnanometer-thick MoS2 monolayer strongly passivates the chemical properties of the underlying Au, and the Au significantly modulates the electronic band structure of the MoS2, turning it from semiconducting to metallic. This could find applications in many areas, including electrochemistry, photovoltaics, and photocatalysis.

Rigorous and Accurate Contrast Spectroscopy for Ultimate Thickness Determination of Micrometer-Sized Graphene on Gold and Molecular Sensing.

The thickness of graphene films can be accurately determined by optical contrast spectroscopy. However, this becomes challenging and complicated when the flake size reduces to the micrometer scale, where the contrast spectrum is sensitively dependent on the polarization and incident angle of light. Here, we report accurate measurement of the optical contrast spectra of micrometer-sized few-layer graphene flakes on Au substrate. Using a high-resolution optical microscopy with a 100× magnification objective, we accurately determined the layer numbers of flakes as small as one micrometer in lateral size. We developed a theoretical model to accurately take into account the appropriate contribution of light incident at various angles and polarizations, which matched the experimental results extremely well. Furthermore, we demonstrate that the optical contrast spectroscopy is highly sensitive to detect the adsorption of submonolayer airborne hydrocarbon molecules, which can reveal whether graphene is contaminated. Though the technique was demonstrated on graphene, it can be readily generalized to many other two-dimensional materials, which opens new avenues for developing miniaturized and ultrasensitive label-free molecular sensors.

Optimising the visibility of graphene and graphene oxide on gold with multilayer heterostructures.

Metals have been increasingly used as substrates in devices based on two-dimensional (2D) materials. However, the high reflectivity of bulk metals results in low optical contrast (<3%) and therefore poor visibility of transparent mono- and few-layer 2D materials on these surfaces. Here we demonstrate that by engineering the complex reflectivity of a purpose-designed multilayer heterostructure composed of thin Au films (2-8 nm) on SiO2/Si substrate, the optical contrast of graphene and graphene oxide (GO) can be significantly enhanced in comparison to bulk Au, up to about 3 and 5 times, respectively. In particular, we achieved ∼17% optical contrast for monolayer GO, which is even 2 times higher than that on bare SiO2/Si substrate. The experimental results are in good agreement with theoretical simulations. This concept is demonstrated for Au, but the methodology is applicable to other metals and can be adopted to design a variety of high-contrast metallic substrates. This will facilitate research and applications of 2D materials in areas such as plasmonics, photonics, catalysis and sensors.

In Situ Ellipsometric Monitoring of Gold Nanorod Metamaterials Growth.

An in situ transmission-based system has been designed to optically monitor the ellipsometry constants of a hyperbolic plasmonic metamaterial during electrochemical growth. The metamaterial, made from an array of vertically aligned gold nanorods, has demonstrated an unprecedented ability to manipulate the polarization of light using subwavelength thickness slabs, making in situ ellipsometric data a powerful tool in the controlled design of such components. In this work, we show practical proof-of-principle of this design method and rationalize the ellipsometric output on the basis of the modal properties of the nanorod metamaterial. The real-time optical monitoring setup provides excellent control and repeatability of nanostructure growth for the design of future ultrathin optical components. The performance of the ellipsometric method was also tested as a refractive index sensor. Monitoring refractive index changes near the metamaterial's epsilon near zero (ENZ) frequency showed a sensitivity on the order of 500°/RIU in the ellipsometric phase for a metamaterial that shows 250 nm/RIU sensitivity in its extinction.

The controlled fabrication and geometry tunable optics of gold nanotube arrays.

Arrays of vertically aligned gold nanotubes are fabricated over several square centimetres which display a geometry tunable plasmonic extinction peak at visible wavelengths and at normal incidence. The fabrication method gives control over nanotube dimensions with inner core diameters of 15-30 nm, wall thicknesses of 5-15 nm and nanotube lengths of up to 300 nm. It is possible to tune the position of the extinction peak through the wavelength range 600-900 nm by varying the inner core diameter and wall thickness. The experimental data are in agreement with numerical modelling of the optical properties which further reveal highly localized and enhanced electric fields around the nanotubes. The tunable nature of the optical response exhibited by such structures could be important for various label-free sensing applications based on both refractive index sensing and surface-enhanced Raman scattering.

High-performance biosensing using arrays of plasmonic nanotubes.

We show that aligned gold nanotube arrays capable of supporting plasmonic resonances can be used as high performance refractive index sensors in biomolecular binding reactions. A methodology to examine the sensing ability of the inside and outside walls of the nanotube structures is presented. The sensitivity of the plasmonic nanotubes is found to increase as the nanotube walls are exposed, and the sensing characteristic of the inside and outside walls is shown to be different. Finite element simulations showed good qualitative agreement with the observed behavior. Free standing gold nanotubes displayed bulk sensitivities in the region of 250 nm per refractive index unit and a signal-to-noise ratio better than 1000 upon protein binding which is highly competitive with state-of-the-art label-free sensors.

Polarization conversion through collective surface plasmons in metallic nanorod arrays.

For two-dimensional (2D) arrays of metallic nanorods arranged perpendicular to a substrate several methods have been proposed to determine the electromagnetic near-field distribution and the surface plasmon resonances, but an analytical approach to explain all optical features on the nanometer length scale has been missing to date. To fill this gap, we demonstrate here that the field distribution in such arrays can be understood on the basis of surface plasmon polaritons (SPPs) that propagate along the nanorods and form standing waves. Notably, SPPs couple laterally through their optical near fields, giving rise to collective surface plasmon (CSP) effects. Using the dispersion relation of such CSPs, we deduce the condition of standing-wave formation, which enables us to successfully predict several features, such as eigenmodes and resonances. As one such property and potential application, we show both theoretically and in an experiment that CSP propagation allows for polarization conversion and optical filtering in 2D nanorod arrays. Hence, these arrays are promising candidates for manipulating the light polarization on the nanometer length scale.

Molecular plasmonics with tunable exciton-plasmon coupling strength in J-aggregate hybridized Au nanorod assemblies.

Controlling coherent electromagnetic interactions in molecular systems is a problem of both fundamental interest and important applicative potential in the development of photonic and opto-electronic devices. The strength of these interactions determines both the absorption and emission properties of molecules coupled to nanostructures, effectively governing the optical properties of such a composite metamaterial. Here we report on the observation of strong coupling between a plasmon supported by an assembly of oriented gold nanorods (ANR) and a molecular exciton. We show that the coupling is easily engineered and is deterministic as both spatial and spectral overlap between the plasmonic structure and molecular aggregates are controlled. We think that these results in conjunction with the flexible geometry of the ANR are of potential significance to the development of plasmonic molecular devices.