Winograd Wedge Resection Matrixectomy versus Partial Nail Avulsion with Chemical Cautery: A Tertiary Institution's Clinical Outcomes and Proposed Triaging Protocol.

BACKGROUND: Onychocryptosis, or ingrown toenail, is a common condition affecting patients of varying age groups, although usually, younger patients are affected. METHODS: We compared two techniques used in our institution: Winograd wedge resection with matrixectomy (WG-M) versus partial nail avulsion with phenolization of the nail matrix (PNA-P). RESULTS: Primary outcomes of interest were presence of nail regrowth and patient satisfaction postoperatively. Secondary outcomes were postoperative pain (within the first 2 weeks and after 2 weeks), postoperative inflammation, and healing time. A total of 65 patients were included in this study: 44 patients (19 female and 25 male patients), with a mean age of 45.7 years (range, 16-83 years) underwent WG-M in the orthopedic surgery department, whereas a total of 21 patients (10 female and 11 male patients), with a mean age of 44.5 years (range, 13 to 75 years) underwent PNA-P in the podiatry department. In patients who underwent WG-M, there was one case of regrowth (2.3%) compared with no regrowth cases (0%) in the PNA-P group. There was no significant difference in regrowth rate between the two procedures (P = .494). The satisfaction rate was high for both procedures: 100% patients in the WG-M group rated themselves better than before surgery, compared with 95.7% in the PNA-P group. CONCLUSIONS: From our study, we conclude that both techniques (WG-M and PNA-P) are able to achieve similar clinical outcomes, with the PNA-P procedure being less invasive and less resource intensive, and also achieving a shorter healing time.

A Clinician-Free Method Using Top-View Photography for Screening and Monitoring Hallux Valgus.

BACKGROUND: Hallux valgus is a progressive foot deformity that commonly affects middle-aged women. The aim of this study was to develop a novel method using only top-view photographs to assess hallux valgus severity. METHODS: A top-view digital photograph was taken of each foot of 70 female participants. Two straight lines were drawn along the medial edge of the great toe and forefoot, and the included angle (termed bunion angle) was measured using a free software program. Each foot was also assessed by a clinician using the Manchester scale as no (grade 1), mild (grade 2), moderate (grade 3), or severe (grade 4) deformity. RESULTS: The mean bunion angles of the 140 feet were 6.7°, 13.5°, and 16.2° for Manchester grades 1, 2, and 3, respectively (no foot was in grade 4). The reliability was excellent for both intrarater (intraclass correlation coefficient [ICC] = 0.93-0.95) and interrater (ICC = 0.90) assessments. Receiver operating characteristic curves determined the optimal bunion angle cutoff value for screening hallux valgus to be 9°, which gives 89.2% sensitivity and 74.2% specificity. CONCLUSIONS: The bunion angle is a reliable, clinician-free method that can potentially be integrated into a smartphone app for easy and inexpensive self-assessment of hallux valgus.

Test-retest reliability of a clinical foot assessment device for measuring first metatarsophalangeal joint quasi-stiffness.

BACKGROUND: The stiffness of the first metatarsophalangeal joint (MTPJ) is of interest in cases such as hallux rigidus and apropulsive gait. Subjective rating of joint mobility as 'hypermobile, normal, or stiff' is an unreliable method. Previous instruments for the assessment of first MTPJ stiffness can be too hard and uncomfortable for test subjects. Recently, a new device using a load cell and optical fiber with fiber Bragg grating (FBG) sensors was developed to provide a comfortable means of clinical foot assessment. This study aimed to evaluate the test-retest reliability of this FBG-load cell device in measuring the first MTPJ quasi-stiffness. METHODS: The left foot of 13 female subjects were measured twice for their first MTPJ quasi-stiffness, approximately seven days apart. The FBG-load cell device measured the MTPJ range of motion from a resting position to maximum dorsiflexion and then returning to the resting start-position. The force applied by a clinician to displace the toe was simultaneously recorded using the load cell. The quasi-stiffness over the "working range" in loading and unloading directions were determined from the slope of the torque-angular displacement graph. The test-retest reliability of the MTPJ quasi-stiffness was evaluated using intra-class correlation coefficient [ICC (2,1)]. RESULTS: The reliability was almost perfect for MTPJ quasi-stiffness over the loading phase (ICC = 0.814), moderate for MTPJ quasi-stiffness over the unloading phase (ICC = 0.477) and moderate for MTPJ maximum range (ICC = 0.486). CONCLUSION: The foot assessment device comprising FBG and load cell was able to reliably measure the first MTPJ quasi-stiffness in a clinical setting. The measurement reliability was higher during the loading phase than the unloading phase.

A collaborative approach in patient education for diabetes foot and wound care: A pragmatic randomised controlled trial.

Foot care education is an important strategy in reducing lower limb complications. There is evidence that contemporary communication approaches can improve patient education outcomes. To inform the potential of such methods in diabetic foot education, we trialled a collaborative approach in patient education counselling in a podiatry clinic. We conducted a single-blind pragmatic randomised controlled trial on 52 diabetes patients who had an active foot ulcer. Participants were randomised to either collaborative education or traditional didactic education. Outcomes on knowledge and self-care behaviours were collected via a pre and post study questionnaire (max score: 75). The study ended at 12 weeks or when the wound healed prior. 42 (80.7%) participants completed the study. The collaborative patient education group had a significant increase in score post-study (38.8 ± 8.5) compared to pre-study (32.8 ± 6.9; P < .001). The control group had no significant increase in score post study. The difference in scores between groups had a moderate effect size (d = 0.54). The use of a collaborative approach in patient education was able to produce significantly greater increase in knowledge retention and self-care behaviours, without the need for additional consultation time in a podiatry clinic.

First ray mobility and posterior tibial tendon dysfunction (PTTD) in persons with flatfoot: A case control study.

BACKGROUND: While posterior tibial tendon dysfunction (PTTD) commonly presents with flat feet and has been thought to be associated with first ray mobility, many flat-footed individuals are asymptomatic and do not experience any symptoms of PTTD. Thus, there is a need to control for foot type when studying factors related to PTTD. This study aimed to clarify if first ray mobility differed between flat-footed individuals with and without symptoms of PTTD. It was hypothesized that PTTD patients would display higher mobility of the first ray than asymptomatic flat-footed controls. METHODS: Given that PTTD patients were often flat-footed, asymptomatic flat-footed individuals were chosen as controls to remove flatfoot as a potential confounding factor. We recruited 32 flat-footed subjects, of which 16 exhibiting PTTD symptoms and 16 asymptomatic controls matched for age, sex and body mass index. First ray mobility was assessed using subjective classification ("stiff", "normal" or "hypermobile") and maximum dorsal displacement using a ruler indicator. Mann-Whitney U was used to test for between-groups differences. RESULTS: Subjective classification was similar between PTTD and control groups (both groups: 38% "normal" joint mobility). No significant differences were found between PTTD patients and asymptomatic controls in first ray displacement [median (IQR), PTTD: 6.00 (1.75) mm; control: 6.00 (1.00) mm; P=.31]. CONCLUSIONS: First ray mobility was not associated with PTTD in flat-footed persons. When evaluating symptoms of PTTD, clinicians should pay attention to factors other than first ray mobility.

An Ergonomic Testing System for the First Metatarsophalangeal Joint Stiffness.

Osteoarthritis sufferers commonly have first metatarsophalangeal joint (MTPJ) problems in which articular surfaces are changed permanently due to fatigue. Therefore, medical devices for early diagnosis would increase the opportunity for prevention of disease progression. In previous studies on stiffness of the first MTPJ many details, although functionally of great importance, have not been fully considered including: design and size of the device, tribology consideration, and errors from device. Therefore, the motivation of our research was to enhance the device design by reducing the size of the device, and device design was enhanced by minimizing measurement errors through development of a new ergonomic left and right foot instrument located medial to the first MTPJ (instead of beneath the foot). The first MTPJ stiffness (N mm/kg radian) measurement was taken on 28 subjects with two replicates per subject by the same tester. The first MTPJ stiffness ranged from 3.49 to 14.42 N mm/kg radian with the mean (SD) value of 8.28 (3.15) N mm/kg radian for the left feet and 3.91 to 11.90 N mm/kg radian with the mean (SD) value of 7.65 (2.07) N mm/kg radian for the right feet. Reliability evaluation was measured using intraclass correlation coefficient and described an excellent reliability between two tests.

Computer aided diagnosis of diabetic foot using infrared thermography: A review.

Diabetes mellitus (DM) is a chronic metabolic disorder that requires regular medical care to prevent severe complications. The elevated blood glucose level affects the eyes, blood vessels, nerves, heart, and kidneys after the onset. The affected blood vessels (usually due to atherosclerosis) may lead to insufficient blood circulation particularly in the lower extremities and nerve damage (neuropathy), which can result in serious foot complications. Hence, an early detection and treatment can prevent foot complications such as ulcerations and amputations. Clinicians often assess the diabetic foot for sensory deficits with clinical tools, and the resulting foot severity is often manually evaluated. The infrared thermography is a fast, nonintrusive and non-contact method which allows the visualization of foot plantar temperature distribution. Several studies have proposed infrared thermography-based computer aided diagnosis (CAD) methods for diabetic foot. Among them, the asymmetric temperature analysis method is more superior, as it is easy to implement, and yielded satisfactory results in most of the studies. In this paper, the diabetic foot, its pathophysiology, conventional assessments methods, infrared thermography and the different infrared thermography-based CAD analysis methods are reviewed.

A novel method of measuring passive quasi-stiffness in the first metatarsophalangeal joint.

BACKGROUND: First metatarsophalangeal joint (MTPJ) mobility is commonly assessed by its angular displacement (joint angle) or subjectively rated as 'hypermobile', 'normal' or 'stiff' by a clinician. Neither of these methods is ideal because displacement alone does not take into account the force required to displace the joint and subjective evaluation is not always reliable. This study presented a novel method to determine the passive quasi-stiffness of the first MTPJ. The reliability of the proposed method was also assessed. The first MTPJ passive quasi-stiffness of 13 healthy subjects were measured at two occasions, 7 days apart, by two testers (experienced and inexperienced). A tactile pressure sensing system was used to measure the force applied to dorsiflex the first toe by the testers. The torque (in Nmm) about the first MTPJ was calculated as the applied force (in N) multiplied by a moment arm (in mm), where moment arm was the length of the first proximal phalanx. A video camera recorded the motion of the first MTPJ, simultaneously with force measurements, to determine the joint angular displacement (in degrees) using the Dartfish software. The quasi-stiffness (in Nmm/degrees) was calculated as the slope of a graph where torque was plotted against first MTPJ angular displacement. Descriptive statistics of the first MTPJ quasi-stiffness were calculated. Intra-rater and inter-rater reliability were assessed using Bland and Altman plot, intraclass correlation coefficients (ICC), and standard error of measurement (SEM). RESULTS: First MTPJ quasi-stiffness of the subjects ranged widely from 0.66 to 53.4 Nmm/degrees. Intra-rater reliability for experienced tester was moderate (Session 1: 14.9 ± 14.6 Nmm/degrees, Session 2: 14.2 ± 8.5 Nmm/degrees, ICC = .568, SEM = 7.71 Nmm/degrees). Inter-rater reliability between experienced (12.6 ± 8.4 Nmm/degrees) and non-experienced (19.9 ± 9.2 Nmm/degrees) testers was poor (ICC = -.447, SEM = 11.29 Nmm/degrees). CONCLUSIONS: First MTPJ passive quasi-stiffness can be quantified from torque and angular displacement measurements using simple equipment in a clinical setting. The tester's experience affected the consistency in joint quasi-stiffness measurements.