Fluorosis. Antivet contra ácido clorhídrico / fluoride. Antivet vs hydrochloric acid

Introducción: La fluorosis dental es una hipomineralización del esmalte producida como respuesta a la ingesta de fluor por un periodo prolongado durante la formación del esmaltado. Es una alteración irreversible, que clínicamente se caracteriza por la presencia de delgadas líneas blanquecinas distribuidas en el esmalte dental correspondientes a la disposición de las periquimatías, y en grados más avanzados de la enfermedad se odservan cambios en toda la superficie del esmaltado que adquiere un aspecto opaco, como de piedra caliza. En los niveles más severos de flurosis dental, la presencia de hipomineralización, y el aumento en la porosidad del esmalte dental propicia la pérdida de porciones importantes de su estructura, produciendo fracturas, por lo que se deteriora la apariencia y funcionalidad de los dientes afectados. (1) La OMS recomienda que el valor de referencia para el fluoruro en el agua potable es de 1,5 mg /1.(2) El flúor es un gas halógeno, el más electronegativo de los elementos de la tabla periódica, con número atómico 19, prácticamente no existe libre en la naturaleza, sino asociado a otros elementos como: calcio y sodio. La principal vía de incorporación del flúor en el organismo humano es la digestiva. Es absorbido rápidamente en la mucosa del intestino delgado y del estómago, por un simple fenómeno de difusión. Una en los tejidos, depositándose preferentemente en los tejidos duros; se elimina por todas las vías de excreción, principalmente por orina. La cantidad de flúor en el organismo es variable y depende de la ingestión, inhalación, absorción y eliminación, así como de las características de los compuestos. Generalmente se concentra en huesos, cartílagos, dientes y placa bacteriana. El depósito de flúor varía con la edad y la excreción. En los niños, el 50% se fija en huesos y dientes en formación; en adultos, se deposita básicamente en huesos. (3) Existen diversos métodos para su eliminación. En esta investigación se realizaron 18 procedimientos a pacientes de ambos sexos. La metodología fue dividir en dos grupos de 8 personas cada uno, en el cual se utilizó Antivet en el primer grupo y ácido clorhídrico al 18% en el segundo grupo. Los casos fueron seleccionados al azar y posteriormente se observaron los cambios clínicos con cada grupo. En el primer grupo de personas que utilizaron Antivet, se mostró que en casos severos de fluorosis no era un método tan eficaz, ya que no elimina por completo las manchas marrones, sin embargo, es un procedimiento muy bueno para uso clínico cuando los grados de fluorosis son menores. En el segundo grupo de personas que utilizaron ácido clorhídrico al 18% se demostró la eficacia del tratamiento en fluorosis de grados avanzados, donde el esmalte está más del 50% dañado, por lo que es un excelente método de tratamiento con el debido control en su manipulación. Objetivo: Saber diferenciar los tipos de materiales y conocer los diferentes métodos para eliminación de flúor así como mostrar la diferencia entre tratamientos. Metodología: El tipo de estudio es explicativo y con el cual se espera contribuir al desarrollo del conocimiento científico. Su realización supone el ánimo de contribuir al desarrollo del saber científico. Consistió en seleccionar 16 pacientes, masculinos y femenonos y de distintas edades de entre 15 y 40 años. Se dividieron al azar, en 2 grupos de 8 personas cada uno para tratarlos con 2 productos diferentes. El primer grupo fue tratado con ácido clorhídrico al 18% y el segundo grupo con la marca comercial Antivet. Resultado y conclusión: La fluorosis dental es causada por ingestas excesivas de flúor. El uso del ácido clorhídrico es corrosivo, su aroma es penetrante y los cuidados con el paciente son mayores, ya que un mal uso al tener contacto con piel o mucosa creará necrosis. El Antivet tiene desventajas de costo y disponibilidad, pero su ventaja es que brinda más seguridad en su manipulación.

Introduction: Dental fluorosis is a hypomineralization of the enamel produced due to fluoride intake for a prolonged time during enamel formation. It is an irreversible alteration, which is clinically characterized by the presence of thin whitish lines distributed in the dental enamel corresponding to the disposition of the perikymata. In more advanced degrees of the disease, changes are observed in the entire enamel surface, which acquires an opaque appearance, like limestone. In the most severe levels of dental fluorosis, the presence of hypomineralization and increased porosity of the dental enamel leads to the loss of essential portions of its structure, producing fractures, thus deteriorating the appearance and functionality of the affected teeth. (1) The WHO recommends that the reference value for fluoride in drinking water is 1.5 mg/l. (2) Fluoride is a halogen gas, the most electronegative of the periodic table elements, with atomic number 19. It practically does not exist free in nature but is associated with other elements such as calcium and sodium. The primary way of incorporating fluorine into the human organism is through the digestive system. It is rapidly absorbed in the mucosa of the small intestine and stomach by a simple phenomenon of diffusion. Once absorbed, fluoride passes into the blood and is distributed in the tissues, preferentially deposited in hard tissues; it is eliminated by all excretion routes, mainly by the urine. The amount of fluoride in the body is variable and depends on ingestion, inhalation, absorption, elimination, and the characteristics of the compounds. It is generally concentrated in bones, cartilage, teeth, and bacterial plaque. Fluoride deposition varies with age and excretion. In children, 50% is fixed in bones and teeth information; it is basically deposited in bones in adults. (3) There are various methods for its elimination. In this research, 18 procedures were performed on patients of both sexes. The methodology was divided into two groups of 8 persons each, in which Antivet was used in the first group and 18% hydrochloric acid in the second group. The cases were randomly selected, and subsequently, the clinical changes were observed in each group. In the first group of people who used Antivet, it was shown that in severe cases of fluorosis, it was not such an effective method since it does not completely eliminate the brown stains. However, it is a very effective method for clinical use when the degrees of fluorosis are lower. In the second group of people who used 18% hydrochloric acid, the effectiveness of the treatment was demonstrated in advanced degrees of fluorosis, where the enamel is more than 50% damaged, making it an excellent method of treatment with due control in its manipulation. Objective: To differentiate the types of materials and to know the different methods for fluoride elimination as well as to show the difference between treatments. Methodology: The type of study is explanatory, and it is expected to contribute to the development of scientific knowledge. It was carried out to contribute to the development of scientific knowledge. It consisted of selecting 16 patients of both sexes and of different ages between 15 and 40 years old. They were randomly divided into two groups of 8 persons, each to be treated with two different products. The first group was treated with 18% hydrochloric acid, and the second group with the comercial brand Antivet. Result and conclusion: Dental fluorosis is caused by excessive fluoride intake. Hydrochloric acid is corrosive, its aroma is penetrating, and the care with the patient is greater since a wrong use when in contact with skin or mucosa will create necrosis. Antivet has disadvantages of cost and availability, but its advantage is that it provides more safety in its handling.

Deflexión de agujas dentales 30G: comparación de cinco marcas comerciales / Deflection of dental needles 30G: comparison of five trademarks

Abstract Introducción: El grado o nivel de deflexión de la aguja dental, en la mayoría de los casos, puede determinar el éxito o fracaso en la técnica de anestesia dental. Objetivo: Medir el grado de deflexión de la aguja dental, comparando 5 diferentes marcas disponibles en la ciudad de Hermosillo, Sonora, México. Métodos: Se realizó un estudio experimental, en el que con ayuda de un modelo creado con un nivel profesional y una jeringa tipo cárpul, se realizaron diversas punciones en un trozo de carne de res, simulando la realización de una técnica lineal de anestesia bucodental. Se tomaron radiografías periapicales de cada una de las punciones, y con ayuda de una malla milimetrada, se realizaron las mediciones. Dentro de cada grupo de agujas, se presentaron diferentes medidas de deflexión, y se obtuvo un promedio de cada marca. El rango abarcó desde los .65 mm hasta 2.1 mm de deflexión, tomando como referencia un plano recto. Conclusiones: Se demostró que la de la marca Septodont®, fue la que presentó menor deflexión a la punción. Es recomendable verificar y examinar el estado de las agujas antes de ser utilizadas para realizar procesos quirúrgicos, y así disminuir riesgos y/o complicaciones postoperatorias.

Resumen Introduction: The degree or level of deflection of the dental needle, in most cases, can determine the success or failure of the dental anesthesia technique. Objective: Measure the degree of deflection of the dental needle, comparing 5 different brands available in the city of Hermosillo, Sonora, Mexico. Method: An experimental study was carried out, with a model created with a professional level and a carpul syringe, various punctures were made in a piece of beef, simulating the performance of a linear technique of oral anesthesia. Periapical radiographs of each of the punctures were taken, and with the help of a millimeter mesh, measurements were made. Within each group of needles, different deflection measures were presented, and an average of each brand was obtained. The range ranged from .65 mm to 2.1 mm of deflection, taking as reference a straight plane. Conclusions: It was shown that the Septodont® brand was the one that presented the lowest puncture deflection. It is advisable to verify and examine the condition of the needles before being used to perform surgical procedures, and thus reduce risks and / or postoperative complications.

HLA in Colombia Wayu from Guajira Peninsula Amerindians: Pacific Ocean relationships.

Wayu Amerindians live around Guajira Peninsula shared by Colombia and Venezuela. Wayu from Colombia have been studied for their HLA profile and these data put in context with both genetic and cultural relatedness to Pacific Islanders. HLA-A*24 and HLA-B*35 (most likely HLA-A*24:02 and HLA-B*35:05) and HLA-DRB1*04:03 and HLA-DQB1*03:02 are shared both by Wayu and other Amerindians and Pacific Islanders in specific high frequency. Our findings further suggest a genetic relationship between Amerindians (also Wiwa/Arsario and Chimila from Colombia; Uros from Peru) and Pacific Islanders. Titikaka Lake (Peru/Bolivia) Amerindians (Aymara, Uros and Quechua) share also cultural traits, like Tiwanaku (Titikaka Culture giant statues) and Easter Island Culture giant statues or "Moais".

Study of Colombia North Wiwa El Encanto Amerindians HLA- genes: Pacific Islanders relatedness.

We have studied Wiwa/Sanja Amerindians HLA-A, -B, -C, -DRB1 and DQB1 allele frequencies and extended haplotypes in 52 unrelated individuals from "El Encanto" town at Guanachaca riverside. High frequency alleles were in general present in other Amerindian populations. Also, three extended haplotypes and eight ones were respectively both "new found" and already described in Amerindians from North, Central and South America, including Lakota-Sioux, Mayas, Teeneks, Quechua and Aymaras. Analyses of HLA-A*24:02 and -C*01:02 Wiwa high frequency alleles suggested a specific relatedness with another Amerindian and Pacific Islander ethnic groups (these two particular alleles bearing in high frequencies); they include New Zealand Maoris, Taiwanese, Japanese, Papua New Guinea, and Samoans among others. This may indicate that selective forces are maintaining these two alleles high frequency within this wide American/Pacific area.

HLA in North Colombia Chimila Amerindians.

HLA-A,-B,-C,-DRB1 and -DQB1 alleles have been studied in Chimila Amerindians from Sabana de San Angel (North Colombian Coast) by using high resolution molecular typing. A frequent extended haplotype was found:HLA-A*24:02-B*51:10-C*15:02-BRB1*04:07-DQB1*03:02 (28.7%) which has also been described in Amerinndian Mayos Mexican population (Mexico, California Gulf, Pacific Ocean). Other haplotypes had already been found in Amerindians from Mexico (Pacific and Atlantic Coast), Peru (highlands and Amazon Basin), Bolivia and North USA. A geographic pattern according to HLA allele or haplotype frequencies is lacking in Amerindians, as already known. Also, five new extended haplotypes were found in Chimila Amerindians. Their HLA-A*24:02 high frequencies characteristic is shared with aboriginal populations of Taiwan; also, HLA-C*01:02 high frequencies are found in New Zealand Maoris, New Caledonians and Kimberly Aborigines from Australia. Finally, this study may show a model of evolutionary factors acting and rising one HLA allele frequency (-A*24:02), but not in others that belong to the same or different HLA loci.

HLA genes in Barranquilla (North Colombia): Searching for cryptic Amerindian genes.

America First Inhabitants population (Amerindians, Na Dene and Eskimos) underwent a drastic population reduction and gene exchange after Europeans and Africans arrival after 1492 AD. Barranquilla population may be a good model to study present day population admixture in South America. HLA-A, -B and -DRB1 DNA typing has been performed in 188 unrelated individuals originated in the area and speak Spanish language; they showed apparent European/African and mixed characters. HLA genetic European/African features were found and only 1.85% Amerindian one. This contrasts with neighboring Cuban population where 10% HLA Amerindian characters appear.

Deflexión de agujas dentales 30G: comparación de cinco marcas comerciales

Introducción: El grado o nivel de deflexión de la aguja dental, en la mayoría de los casos, puede determinar el éxito o fracaso en la técnica de anestesia dental. Objetivo: Medir el grado de deflexión de la aguja dental, comparando 5 diferentes marcas disponibles en la ciudad de Hermosillo, Sonora, México. Métodos: Se realizó un estudio experimental, en el que con ayuda de un modelo creado con un nivel profesional y una jeringa tipo cárpul, se realizaron diversas punciones en un trozo de carne de res, simulando la realización de una técnica lineal de anestesia bucodental. Se tomaron radiografías periapicales de cada una de las punciones, y con ayuda de una malla milimetrada, se realizaron las mediciones. Dentro de cada grupo de agujas, se presentaron diferentes medidas de deflexión, y se obtuvo un promedio de cada marca. El rango abarcó desde los .65 mm hasta 2.1 mm de deflexión, tomando como referencia un plano recto. Conclusiones: Se demostró que la de la marca Septodont®, fue la que presentó menor deflexión a la punción. Es recomendable verificar y examinar el estado de las agujas antes de ser utilizadas para realizar procesos quirúrgicos, y así disminuir riesgos y/o complicaciones postoperatorias.

Introduction: The degree or level of deflection of the dental needle, in most cases, can determine the success or failure of the dental anesthesia technique. Objective: Measure the degree of deflection of the dental needle, comparing 5 different brands available in the city of Hermosillo, Sonora, Mexico. Method: An experimental study was carried out, with a model created with a professional level and a carpul syringe, various punctures were made in a piece of beef, simulating the performance of a linear technique of oral anesthesia. Periapical radiographs of each of the punctures were taken, and with the help of a millimeter mesh, measurements were made. Within each group of needles, different deflection measures were presented, and an average of each brand was obtained. The range ranged from .65 mm to 2.1 mm of deflection, taking as reference a straight plane. Conclusions: It was shown that the Septodont® brand was the one that presented the lowest puncture deflection. It is advisable to verify and examine the condition of the needles before being used to perform surgical procedures, and thus reduce risks and / or postoperative complications.