Impact of different hand-drying methods on surrounding environment: aerosolization of virus and bacteria, and transfer to surfaces.

BACKGROUND: In recent years, hand drying has been highlighted as a key step in appropriate hand hygiene, as moisture on hands can increase the transfer of micro-organisms from hands to surfaces and vice versa. AIM: To understand bacterial and viral aerosolization following hand drying, and study the transfer of micro-organisms from hands to surfaces after drying using different methods. METHODS: Groups of five volunteers had their hands pre-washed with soap, rinsed and dried, then inoculated with a concentrated mixture of Pseudomonas fluorescens and MS2 bacteriophage. Volunteers entered an empty washroom, one at a time, and rinsed their hands with water or washed their hands with soap prior to drying with a jet dryer or paper towels. Each volunteer applied one hand successively to various surfaces, while their other hand was sampled using the glove juice method. Both residual bacteria and viruses were quantified from the washroom air, surface swabs and hand samples. FINDINGS: P. fluorescens and MS2 bacteriophages were rarely aerosolized while drying hands for any of the drying methods studied. Results also showed limited, and similar, transfer of both micro-organisms studied on to surfaces for all drying methods. CONCLUSION: The use of jet dryers or paper towels produces low levels of aerosolization when drying hands in a washroom. Similarly, all drying methods result in low transfer to surfaces. While the coronavirus disease 2019 pandemic raised concerns regarding public washrooms, this study shows that all methods tested are hygienic solutions for dry washed hands.

Evaluation of cold atmospheric plasma for the decontamination of flexible endoscopes.

BACKGROUND: Despite adherence to standard protocols, residues including live micro-organisms may remain on the various surfaces of reprocessed flexible endoscopes. Prions are infectious proteins that are notoriously difficult to eliminate. AIM: To test the potential of cold atmospheric plasma (CAP) for the decontamination of various surfaces of flexible endoscopes, measuring total proteins and prion residual infectivity as indicators of efficacy. METHODS: New PTFE endoscope channels and metal test surfaces spiked with test soil or prion-infected tissues were treated using different CAP-generating prototypes. Surfaces were examined for the presence of residues using very sensitive fluorescence epimicroscopy. Prion residual infectivity was determined using the wire implant animal model and a more sensitive cell infectivity assay. FINDINGS: A CAP jet applied perpendicularly at close range on flat test surfaces removed soil within 3 min, but left microscopic residues and failed to eliminate prion infectivity according to the wire implant animal assay. The longitudinal gas flow from CAP prototypes developed for the treatment of long channels led to the displacement and sedimentation of residual soil towards the distal end, when applied alone. Observations of the plasma inside glass tubes showed temporal and spatial heterogeneity within a limited range. After the standard enzymatic manual pre-wash, 'CAP-activated' gas effluents prevented prion transmission from treated endoscope channels according to the prion infectivity cell assay. CONCLUSION: CAP shows promising results as a final step for decontamination of surgical surfaces. Optimizing CAP delivery could further enhance CAP efficacy, offering a safe, chemical-free alternative for the reprocessing of all luminal flexible endoscope surfaces.

Sensitive microscopic quantification of surface-bound prion infectivity for the assessment of surgical instrument decontamination procedures.

BACKGROUND: Pathogenic prions (PrPSc) are amyloid-rich hydrophobic proteins which bind avidly to surgical surfaces and represent some of the most difficult targets during the reprocessing of reusable surgical instruments. In-vitro methods to amplify and detect the presence of otherwise undetectable prion contamination are available, but they do not measure associated infectivity. Most of these methods rely on the use of proteinase K, however this can lead to the loss of a substantial portion of PrPSc, potentially producing false negatives. AIM: To develop a sensitive in-situ method without proteinase treatment for the dynamic quantification of amyloid accumulation in N2a #58 cells following 22L-prion infection from infected tissues and spiked stainless-steel surfaces. METHODS: We spiked cultures of N2a #58 cells with the 22L prion strain in solution or dried on stainless-steel wires and directly measured the accumulation of prion amyloid aggregates over several passages using highly sensitive fluorescence microscopy. FINDINGS: We demonstrated a 10-log dynamic range using our method to test residual prion infectivity, that was validated to show variable decontamination efficacy against prions from commercially available cleaning chemistries. CONCLUSIONS: The new cell-based infectivity method presented here avoids partial or possibly total proteinase K digestion of PrPSc in samples for greater sensitivity, in addition to low cost, no ethical concerns, and adaptability to detect different prion strains. This method can be used to test cleaning chemistries' efficacy with greater sensitivity than measuring total residual proteins, which may not correlate with residual prion infectivity.

Improved surveillance of surgical instruments reprocessing following the variant Creutzfeldt-Jakob disease crisis in England: findings from a three-year survey.

BACKGROUND: Sensitive, direct protein-detection methods are now recommended for the inspection of reprocessed reusable surgical instruments in England to reduce the risk of prion transmission. AIM: To implement an established, highly sensitive method to quantify proteinaceous residues on reprocessed instruments in a Sterile Services Department (SSD) and evaluate its potential impact on service provision. METHODS: We introduced highly sensitive epifluorescence (EDIC/EF) microscopy in a large SSD. Over three years, we periodically tested two models of washer disinfector using stainless-steel tokens spiked with mouse brain homogenate or Browne test soil for comparison. We also obtained data and feedback from staff who had been using EDIC/EF to examine almost 3000 reprocessed instruments. FINDINGS: All reprocessed test surfaces harboured residual contamination (up to 258.4 ng from 1-µg spikes). Proximity between surfaces affected decontamination efficacy and allowed cross-contamination. Up to 50 ng de novo proteinaceous contamination was deposited on control surfaces after a single automated washer disinfector (AWD) cycle. The test soil behaved differently than real tissue contamination. SSD staff observed proteinaceous residues on most reprocessed instruments using EDIC/EF, which can detect far smaller amounts than the currently accepted national threshold of 5 µg per side. CONCLUSIONS: Implementing recent national guidelines to address the prions concern proved an eye-opener. Microscopic levels of proteins remain on many reprocessed instruments. The impact most of these residues, potentially including prions, may have on subsequent patients after sterilization remains debatable. Improving surveillance capability in SSDs can support decision making and raise the standards of surgical instruments reprocessing.

A cold water, ultrasonically activated stream efficiently removes proteins and prion-associated amyloid from surgical stainless steel.

BACKGROUND: Sterile service department decontamination procedures for surgical instruments struggle to demonstrate efficient removal of the hardiest infectious contaminants, such as prion proteins. A recently designed novel system, which uses a low pressure ultrasonically activated, cold water stream, has previously demonstrated efficient hard surface cleaning of several biological contaminants. AIM: To test the efficacy of an ultrasonically activated stream for the removal of tissue proteins, including prion-associated amyloid, from surgical stainless steel surfaces. METHODS: Test surfaces were contaminated with 22L, ME7 or 263K prion-infected brain homogenates. The surfaces were treated with the ultrasonically activated water stream for contact times of 5 and 10 s. Residual proteinaceous and amyloid contamination were quantified using sensitive microscopic analysis, and immunoblotting was used to characterize the eluted prion residues before and after treatment with the ultrasonically activated stream. FINDINGS: Efficient removal of the different prion strains from the surgical stainless steel surfaces was observed, and reduced levels of protease-susceptible and -resistant prion protein was detected in recovered supernatant. CONCLUSION: This study demonstrated that an ultrasonically activated stream has the potential to be a cost-effective solution to improve current decontamination practices and has the potential to reduce hospital-acquired infections.

Efficacy of humidity retention bags for the reduced adsorption and improved cleaning of tissue proteins including prion-associated amyloid to surgical stainless steel surfaces.

Increasing drying time adversely affects attachment of tissue proteins and prion-associated amyloid to surgical stainless steel, and reduces the efficacy of commercial cleaning chemistries. This study tested the efficacy of commercial humidity retention bags to reduce biofouling on surgical stainless steel and to improve subsequent cleaning. Surgical stainless steel surfaces were contaminated with ME7-infected brain homogenates and left to dry for 15 to 1,440 min either in air, in dry polythene bags or within humidity retention bags. Residual contamination pre/post cleaning was analysed using Thioflavin T/SYPRO Ruby dual staining and microscope analysis. An increase in biofouling was observed with increased drying time in air or in sealed dry bags. Humidity retention bags kept both protein and prion-associated amyloid minimal across the drying times both pre- and post-cleaning. Therefore, humidity bags demonstrate a cheap, easy to implement solution to improve surgical instrument reprocessing and to potentially reduce associated hospital acquired infections.

Cold water cleaning of brain proteins, biofilm and bone - harnessing an ultrasonically activated stream.

In the absence of sufficient cleaning of medical instruments, contamination and infection can result in serious consequences for the health sector and remains a significant unmet challenge. In this paper we describe a novel cleaning system reliant on cavitation action created in a free flowing fluid stream where ultrasonic transmission to a surface, through the stream, is achieved using careful design and control of the device architecture, sound field and the materials employed. Cleaning was achieved with purified water at room temperature, moderate fluid flow rates and without the need for chemical additives or the high power consumption associated with conventional strategies. This study illustrates the potential in harnessing an ultrasonically activated stream to remove biological contamination including brain tissue from surgical stainless steel substrates, S. epidermidis biofilms from glass, and fat/soft tissue matter from bone structures with considerable basic and clinical applications.