Nanoparticle approaches for the renin-angiotensin system.

The renin-angiotensin system (RAS) is a hormonal cascade that contributes to several disorders: systemic hypertension, heart failure, kidney disease, and neurodegenerative disease. Activation of the RAS can promote inflammation and fibrosis. Drugs that target the RAS can be classified into 3 categories, AT1 angiotensin receptor blockers (ARBs), angiotensin-converting enzyme (ACE) inhibitors, and renin inhibitors. The therapeutic efficacy of current RAS-inhibiting drugs is limited by poor penetration across the blood-brain barrier, low bioavailability, and to some extent, short half-lives. Nanoparticle-mediated drug delivery systems (DDSs) are possible emerging alternatives to overcome such limitations. Nanoparticles are ideally 1-100 nm in size and are considered efficient DDSs mainly due to their unique characteristics, including water dispersity, prolonged half-life in blood circulation, smaller size, and biocompatibility. Nano-scale DDSs can reduce the drug dosage frequency and acute toxicity of drugs while enhancing therapeutic success. Different types of nanoparticles, such as chitosan, polymeric, and nanofibers, have been examined in RAS-related studies, especially in hypertension, cardiovascular disease, and COVID-19. In this review article, we summarize the physical and chemical characteristics of each nanoparticle to elaborate on their potential use in RAS-related nano-drug delivery research and clinical application.

Chalcones as Anti-Glioblastoma Stem Cell Agent Alone or as Nanoparticle Formulation Using Carbon Dots as Nanocarrier.

The current prognosis for glioblastoma is dismal. Treatment-resistant glioblastoma stem cells (GSCs) and the failure of most drugs to reach therapeutic levels within the tumor remain formidable obstacles to successful treatment. Chalcones are aromatic ketones demonstrated to reduce malignant properties in cancers including glioblastoma. Nanomedicines can increase drug accumulation and tumor cell death. Carbon-dots are promising nanocarriers that can be easily functionalized with tumor-targeting ligands and anti-cancer drugs. Therefore, we synthesized a series of 4'-amino chalcones with the rationale that the amino group would serve as a "handle" to facilitate covalent attachment to carbon-dots and tested their cytotoxicity toward GSCs. We generated 31 chalcones (22 4'-amino and 9 4' derivatives) including 5 novel chalcones, and found that 13 had an IC50 below 10 µM in all GSC lines. After confirming that the 4-amino group was not part of the active pharmacophore, chalcones were attached to transferrin-conjugated carbon-dots. These conjugates were significantly more cytotoxic than the free chalcones, with the C-dot-transferrin-2,5, dimethoxy chalcone conjugate inducing up to 100-fold more GSC death. Several of the tested chalcones represent promising lead compounds for the development of novel anti-GSC drugs. Furthermore, designing amino chalcones for carbon-dot mediated drug delivery is a rational and effective methodology.

In vivo characterization of carbon dots-bone interactions: toward the development of bone-specific nanocarriers for drug delivery.

Current treatments for osteoporosis and other bone degenerative diseases predominately rely on preventing further bone erosion rather than restoring bone mass, as the latter treatments can unintentionally trigger cancer development by undiscriminatingly promoting cell proliferation. One approach to circumvent this problem is through the development of novel chemical carriers to deliver drug agents specifically to bones. We have recently shown that carbon nanodots (C-dots) synthesized from carbon nanopowder can bind with high affinity and specificity to developing bones in the larval zebrafish. Larval bones, however, are physiologically different from adult bones in their growth, repair, and regeneration properties. Here we report that C-dots can bind to adult zebrafish bones and that this binding is highly specific to areas of appositional growth. C-dots deposition occurred within 30 minutes after delivery and was highly selective, with bones undergoing regeneration and repair showing higher levels of C-dots deposition than bones undergoing normal homeostatic turnover. Importantly, C-dots deposition did not interfere with bone regeneration or the animal's health. Together, our results establish C-dots as a potential novel vehicle for the targeted delivery of drugs to treat adult bone disease.

Gel-like carbon dots: A high-performance future photocatalyst.

To protect water resources, halt waterborne diseases, and prevent future water crises, photocatalytic degradation of water pollutants arouse worldwide interest. However, considering the low degradation efficiency and risk of secondary pollution displayed by most metal-based photocatalysts, highly efficient and environmentally friendly photocatalysts with appropriate band gap, such as carbon dots (CDs), are in urgent demand. In this study, the photocatalytic activity of gel-like CDs (G-CDs) was studied using diverse water pollution models for photocatalytic degradation. The degradation rate constants demonstrated a remarkably enhanced photocatalytic activity of G-CDs compared with most known CD species and comparability to graphitic carbon nitride (g-C3N4). In addition, the rate constant was further improved by 1.4 times through the embedment of g-C3N4 in G-CDs to obtain CD-C3N4. Significantly, the rate constant was also higher than that of g-C3N4 alone, revealing a synergistic effect. Moreover, the use of diverse radical scavengers suggested that the main contributors to the photocatalytic degradation with G-CDs alone were superoxide radicals (O2-) and holes that were, however, substituted by O2- and hydroxyl radicals (OH) due to the addition of g-C3N4. Furthermore, the photocatalytic stabilities of G-CDs and CD-C3N4 turned out to be excellent after four cycles of dye degradation were performed continuously. Eventually, the nontoxicity and environmental friendliness of G-CDs and CD-C3N4 were displayed with sea urchin cytotoxicity tests. Hence, through various characterizations, photocatalytic degradation and cytotoxicity tests, G-CDs proved to be an environmentally friendly and highly efficient future photocatalyst.

pH and redox triggered doxorubicin release from covalently linked carbon dots conjugates.

Tumor microenvironment responsive drug delivery systems are potential approaches to reduce the acute toxicity caused by high-dose cancer chemotherapy. Notwithstanding the conventional nano-drug delivery systems, the redox and pH stimuli drug delivery systems are currently gaining attention. Therefore, the current study was designed to compare three different covalent carbon dots (C-dots) systems based on doxorubicin (dox) release profiles and cancer cell viability efficacy under acidic and physiological conditions. The C-dots nanosystems that were examined in this study are directly conjugated (C-dots-dox), pH triggered (C-dots-HBA-dox), and the redox stimuli (C-dots-S-S-dox) conjugates. The drug loading content (DLC%) of the C-dots-S-S-dox, C-dots-HBA-dox, and C-dots-dox was 34.2 ± 0.4, 60.0 ± 0.3, and 70.0 ± 0.2%, respectively, that examined by UV-vis spectral analysis. The dox release paradigms were emphasized that all three conjugates were promisingly released the dox from C-dots faster in acidic pH than in physiological pH. The displayed highest dox released percentage in the acidic medium was 74.6 ± 0.8% obtained by the pH stimuli, C-dots-HBA-dox conjugate. When introducing the redox inducer, dithiothreitol (DTT), preferentially, the redox stimuli C-dot-S-S-dox conjugate demonstrated a faster dox release at acidic pH than in the pH 7.4. The SJGBM2 cell viability experiments revealed that the pH stimuli, C-dots-HBA-dox conjugate, displayed a significant cell viability drop in the artificially acidified pH 6.4 medium. However, in the physiological pH, the redox stimuli, C-dots-S-S-dox conjugate, was promising over the pH stimuli C-dots-HBA-dox, exhibiting cell viability of 60%, though its' efficacy dropped slightly in the artificially acidified pH 6.4 medium. Moreover, the current study illustrates the stimuli conjugates' remarkable efficacy on sustain drug release than direct amide linkage.

Direct conjugation of distinct carbon dots as Lego-like building blocks for the assembly of versatile drug nanocarriers.

As a promising drug nanocarrier, carbon dots (CDs) have exhibited many excellent properties. However, some properties such as bone targeting and crossing the blood-brain barrier (BBB) only apply to a certain CD preparation with limited drug loading capacity. Therefore, it is significant to conjugate distinct CDs to centralize many unique properties on the novel drug nanocarrier. Considering that CDs have abundant and tunable surface functionalities, in this study, a direct conjugation was initiated between two distinct CD models, black CDs (B-CDs) and gel-like CDs (G-CDs) via an amidation reaction. As a result of conjugation at a mass ratio of 5:3 (B-CDs to G-CDs) and a two-step purification process, the conjugate, black-gel CDs (B-G CDs) (5:3) inherited functionalities from both CDs and obtained an enhanced thermostability, aqueous stability, red-shifted photoluminescence (PL) emission, and a figure-eight shape with a width and length of 3 and 6 nm, respectively. In addition, the necessity of high surface primary amine (NH2) content in the CD conjugation was highlighted by replacing G-CDs with other CDs with lower surface NH2 content. Meanwhile, the carboxyl groups (COOH) on G-CDs were not enough to trigger self-conjugation between G-CDs. Moreover, the drug loading capacity was enhanced by 54.5% from B-CDs to B-G CDs (5:3). Furthermore, when the mass ratio of B-CDs to G-CDs was decreased from 5:30, 5:100 to 5:300, the obtained nanostructures revealed a great potential of CDs as Lego-like building blocks. Also, bioimaging of zebrafish demonstrated that various B-G CDs exhibited properties of both bone targeting and crossing the BBB, which are specific properties of B-CDs and G-CDs, respectively.

Recent Advances on Utilization of Bioprinting for Tumor Modeling.

Despite the recent rigorous studies towards a possible cure, cancer still remains as one of the most daunting problems faced by the humanity. Currently utilized two-dimensional cancer models are known to have various insuperable limitations such as insufficient biomimicry of the heterogeneous conditions of tumors and their three-dimensional structures. Discrepancies between the laboratory models and the actual tumor environment significantly impair a thorough comprehension of the carcinogenesis process and development of successful remedies against cancer. Modeling tumor microenvironments through bioprinting poses strong potential to minimize the effects of the aforementioned issues thanks to its freeform nature, adaptability, customizability, scalability and diversity. Numerous research studies involving three-dimensional modeling of various cancer types using bioprinting technologies have been reported, recently. In this review, we provide a broad summary of these studies to help better represent their potential and analyze their contribution to cancer research.

Nanoparticle-mediated approaches for Alzheimer's disease pathogenesis, diagnosis, and therapeutics.

Alzheimer's disease (AD) is an irreversible and progressive neurodegenerative disorder manifested by memory loss and cognitive impairment. Deposition of the amyloid ß plaques has been identified as the most common AD pathology; however, the excessive accumulation of phosphorylated or total tau proteins, reactive oxygen species, and higher acetylcholinesterase activity are also strongly associated with Alzheimer's dementia. Several therapeutic approaches targeting these pathogenic mechanisms have failed in clinical or preclinical trials, partly due to the limited bioavailability, poor cell, and blood-brain barrier penetration, and low drug half-life of current regimens. The nanoparticles (NPs)-mediated drug delivery systems improve drug solubility and bioavailability, thus renders as superior alternatives. Moreover, NPs-mediated approaches facilitate multiple drug loading and targeted drug delivery, thereby increasing drug efficacy. However, certain NPs can cause acute toxicity damaging cellular and tissue architecture, therefore, NP material should be carefully selected. In this review, we summarize the recent NPs-mediated studies that exploit various pathologic mechanisms of AD by labeling, identifying, and treating the affected brain pathologies. The disadvantages of the select NP-based deliveries and the future aspects will also be discussed.

Nanoparticle-mediated targeted drug delivery for breast cancer treatment.

Breast cancer (BC) is the most common malignancy in women worldwide, and one of the deadliest after lung cancer. Currently, standard methods for cancer therapy including BC are surgery followed by chemotherapy or radiotherapy. However, both chemotherapy and radiotherapy often fail to treat BC due to the side effects that these therapies incur in normal tissues and organs. In recent years, various nanoparticles (NPs) have been discovered and synthesized to be able to selectively target tumor cells without causing any harm to the healthy cells or organs. Therefore, NPs-mediated targeted drug delivery systems (DDS) have become a promising technique to treat BC. In addition to their selectivity to target tumor cells and reduce side effects, NPs have other unique properties which make them desirable for cancer treatment such as low toxicity, good compatibility, ease of preparation, high photoluminescence (PL) for bioimaging in vivo, and high loadability of drugs due to their tunable surface functionalities. In this study, we summarize with a critical analysis of the most recent therapeutic studies involving various NPs-mediated DDS as alternatives for the traditional treatment approaches for BC. It will shed light on the significance of NPs-mediated DDS and serve as a guide to seeking for the ideal methodology for future targeted drug delivery for an efficient BC treatment.

Triple conjugated carbon dots as a nano-drug delivery model for glioblastoma brain tumors.

Most of the dual nano drug delivery systems fail to enter malignant brain tumors due to a lack of proper targeting systems and the size increase of the nanoparticles after drug conjugation. Therefore, a triple conjugated system was developed with carbon dots (C-dots), which have an average particle size of 1.5-1.7 nm. C-dots were conjugated with transferrin (the targeted ligand) and two anti-cancer drugs, epirubicin and temozolomide, to build the triple conjugated system in which the average particle size was increased only up to 3.5 nm. In vitro studies were performed with glioblastoma brain tumor cell lines SJGBM2, CHLA266, CHLA200 (pediatric) and U87 (adult). The efficacy of the triple conjugated system (dual drug conjugation along with transferrin) was compared to those of dual conjugated systems (single drug conjugation along with transferrin), non-transferrin C-dots-drugs, and free drug combinations. Transferrin conjugated samples displayed the lowest cell viability even at a lower concentration. Among the transferrin conjugated samples, the triple conjugated system (C-dots-trans-temo-epi (C-DT)) was more strongly cytotoxic to brain tumor cell lines than dual conjugated systems (C-dots-trans-temo (C-TT) and C-dots-trans-epi (C-ET)). C-DT increased the cytotoxicity to 86% in SJGBM2 at 0.01 µM while C-ET and C-TT reduced it only to 33 and 8%, respectively. Not only did triple conjugated C-DT increase the cytotoxicity, but also the two-drug combination in C-DT displayed a synergistic effect.

Tryptophan carbon dots and their ability to cross the blood-brain barrier.

Drug traversal across the blood-brain barrier has come under increasing scrutiny recently, particularly concerning the treatment of sicknesses, such as brain cancer and Alzheimer's disease. Most therapies and medicines are limited due to their inability to cross this barrier, reducing treatment options for maladies affecting the brain. Carbon dots show promise as drug carriers, but they experience the same limitations regarding crossing the blood-brain barrier as many small molecules do. If carbon dots can be prepared from a precursor that can cross the blood-brain barrier, there is a chance that the remaining original precursor molecule can attach to the carbon dot surface and lead the system into the brain. Herein, tryptophan carbon dots were synthesized with the strategy of using tryptophan as an amino acid for crossing the blood-brain barrier via LAT1 transporter-mediated endocytosis. Two types of carbon dots were synthesized using tryptophan and two different nitrogen dopants: urea and 1,2-ethylenediamine. Carbon dots made using these precursors show excitation wavelength-dependent emission, low toxicity, and have been observed inside the central nervous system of zebrafish (Danio rerio). The proposed mechanism for these carbon dots abilities to cross the blood-brain barrier concerns residual tryptophan molecules which attach to the carbon dots surface, enabling them to be recognized by the LAT1 transporter. The role of carbon dots for transport open promising avenues for drug delivery and imaging in the brain.

Photoluminescent Carbon Dots: A Mixture of Heterogeneous Fractions.

Photoluminescent carbon dots (CDs) fractions have been isolated from a gel-like material (GM), which was synthesized using a convenient one-step solvothermal route. In terms of purification, size exclusion chromatography (SEC) and dialysis were compared with acetone wash, which revealed the advantage of acetone wash. The pre-purified GM with acetone wash (A-GM) was further isolated by the reversed-phase preparative thin layer chromatography (TLC) with acetonitrile-water mixture (7 : 3; va /vw ) as the developing solvent. As a result, there were four photoluminescent bands on the TLC plate, which indicated the presence of four photoluminescent fractions. Detailed characterization measurements such as UV/Vis absorption, fluorescence emission, attenuated total reflection Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential, dynamic light scattering, atomic force microscopy, and TEM measurements were performed on all fractions to analyze their heterogeneous optical, structural, electrical, and morphological properties. Considering the comprehensive analysis, all isolated fractions were CDs. In addition, excitation wavelength-independent CDs were obtained with a mean size of 2.5 nm and high quantum yield (55 %). Furthermore, the study demonstrates that the excitation wavelength-dependent photoluminescence of GM could result from the mixture of different surface states of each CD fraction rather than multiple surface states of uniform CDs nanoparticles.

Embedding Carbon Dots in Superabsorbent Polymers for Additive Manufacturing.

A type of orange carbon dots (O-CDs) synthesized via an ultrasonication route with citric acid and 1,2-phenylenediamine as precursors was embedded into sodium polyacrylate (SPA) as the ink for 3D printing. Characterizations of these spherical O-CDs revealed an ultra-small size (~2 nm) and excitation-independent, but solvent dependent, emission. The O-CDs were evenly distributed with low degree of aggregation in sodium polyacrylate (SPA), which was achieved due to the property that SPA can absorb water together with O-CDs. The 3D printed photoluminescent objective with the ink revealed a great potential for high yield application of these materials for additive manufacturing. This also represents the first time, bare CDs have been reported as a photoluminescent material in 3D printing, as well as the first time SPA has been reported as a material for 3D printing.

Carbon dots: promising biomaterials for bone-specific imaging and drug delivery.

Bone-related diseases and dysfunctions are heavy burdens on our increasingly aged society. One important strategy to relieve this problem is through early detection and treatment of bone-related diseases. Towards this goal, there has been constant interest in developing novel bone-specific materials for imaging and drug delivery. Currently, however, materials that have high affinity and specificity towards bone are very limited. Carbon dots (C-dots) synthesized from carbon nanopowder bind to calcified bones in vivo with high affinity and specificity. In this study we show that bone binding is highly unique to a specific type of C-dot, and that this binding is non-toxic. Significantly, C-dots derived from other raw materials did not show any bone binding properties. These differences are attributed to the differences in surface chemistry of C-dot preparations, highlighting the heterogeneous nature of C-dots. Importantly, bone-binding by carbon nanopowder derived C-dots is not significantly altered by chemical functionalization of their surface. These unique properties indicate the potential applications of carbon nanopowder-derived C-dots as highly bone-specific bioimaging agents and drug carriers.