Design of eco-friendly fabric softeners: Structure, rheology and interaction with cellulose nanocrystals.

HYPOTHESIS: Concentrated fabric softeners are water-based formulations containing around 10-15 wt% of double tailed esterquat surfactants primarily synthesized from palm oil. In recent patents, it was shown that a significant part of the surfactant contained in today's formulations can be reduced by circa 50% and replaced by natural guar polymers without detrimental effects on the deposition and softening performances. We presently study the structure and rheology of these softener formulations and identify the mechanisms at the origin of these effects. EXPERIMENTS: The polymer additives used are guar gum polysaccharides, one cationic and one modified through addition of hydroxypropyl groups. Formulations with and without guar polymers are investigated using optical and cryo-transmission electron microscopy, small-angle light and X-ray scattering and finally rheology. Similar techniques are applied to study the phase behavior of softener and cellulose nanocrystals considered here as a model for cotton. FINDINGS: The esterquat surfactants are shown to assemble into micron-sized vesicles in the dilute and concentrated regimes. In the former, guar addition in small amounts does not impair the vesicular structure and stability. In the concentrated regime, cationic guars induce a local crowding associated to depletion interactions and leads to the formation of a local lamellar order. In rheology, adjusting the polymer concentration at 1/10th that of the surfactant is sufficient to offset the decrease of the elastic property associated with the surfactant reduction. In conclusion, we have shown that through an appropriate choice of natural additives it is possible to lower the concentration of surfactants in fabric conditioners by about half, a result that could represent a significant breakthrough in current home care formulations.

Fabric Softener-Cellulose Nanocrystal Interaction: A Model for Assessing Surfactant Deposition on Cotton.

There is currently a renewed interest for improving household and personal-care formulations to provide more environment-friendly products. Fabric conditioners used as softeners have to fulfill a number of stability and biodegradability requirements. They should also display significant adsorption on cotton under the conditions of use. The quantification of surfactant adsorption remains however difficult because the fabric-woven structure is complex and deposited amounts are generally small. Here, we propose a method to evaluate cellulose-surfactant interactions with increased detection sensitivity. The method is based on the use of cellulose nanocrystals (CNCs) in lieu of micron-sized fibers or yarns, combined with different techniques, including light scattering, optical and electron microscopy, and electrophoretic mobility. CNCs are rod-shaped nanoparticles in the form of 200 nm laths that are negatively charged and can be dispersed in bulk solutions. In this work, we use a double-tailed cationic surfactant present in fabric softener. Results show that the surfactants self-assemble into unilamellar, multivesicular, and multilamellar vesicles, and the interaction with CNCs is driven by electrostatics. Mutual interactions are strong and lead to the formation of large-scale aggregates, where the vesicles remain intact at the cellulose surface. The technique developed here could be exploited to rapidly assess the fabric conditioner efficiency obtained by varying the nature and content of their chemical additives.

An experimental system to study responses of Medicago truncatula roots to chitin oligomers of high degree of polymerization and other microbial elicitors.

KEY MESSAGE: A fully acetylated, soluble CO preparation of mean DP of ca. 7 was perceived with high sensitivity by M. truncatula in a newly designed versatile root elicitation assay. The root system of legume plants interacts with a large variety of microorganisms, either pathogenic or symbiotic. Understanding how legumes recognize and respond specifically to pathogen-associated or symbiotic signals requires the development of standardized bioassays using well-defined preparations of the corresponding signals. Here we describe the preparation of chitin oligosaccharide (CO) fractions from commercial chitin and their characterization by a combination of liquid-state and solid-state nuclear magnetic resonance spectroscopy. We show that the CO fraction with highest degree of polymerization (DP) became essentially insoluble after lyophilization. However, a fully soluble, fully acetylated fraction with a mean DP of ca. 7 was recovered and validated by showing its CERK1-dependent activity in Arabidopsis thaliana. In parallel, we developed a versatile root elicitation bioassay in the model legume Medicago truncatula, using a hydroponic culture system and the Phytophthora ß-glucan elicitor as a control elicitor. We then showed that M. truncatula responded with high sensitivity to the CO elicitor, which caused the production of extracellular reactive oxygen species and the transient induction of a variety of defense-associated genes. In addition, the bioassay allowed detection of elicitor activity in culture filtrates of the oomycete Aphanomyces euteiches, opening the way to the analysis of recognition of this important legume root pathogen by M. truncatula.

Esterification of beta-chitin via intercalation by carboxylic anhydrides.

beta-chitin is known to form intercalation complexes with aliphatic alcohols and amines. We found that it also forms complexes with carboxylic anhydrides. When the beta-chitin-acetic anhydride complex was heated to 105 degrees C, the hydroxyl groups of chitin were acetylated by a host-guest reaction, maintaining the host's crystal structure. Structures of complex and acetylated products were analyzed by X-ray diffraction, (13)C CP/MAS NMR, and infrared spectroscopy. The maximum degree of substitution (DS) was close to 1.0, suggesting regioselective esterification at the C6 position of chitin. Partially acetylated beta-chitin with a DS of 0.4 could incorporate various guest species that are difficult to be incorporated by original beta-chitin. In contrast, beta-chitin acetate with a DS of 1 lost the ability to form a complex. Intercalation complexes of beta-chitin with cyclic anhydrides (succinic and maleic) also underwent esterification by heating, and the products with a DS of approximately 1 dissolved in aqueous alkali, apparently as the result of the dissociation of introduced carboxyl groups. These phenomena are potentially useful in controlling the complexation ability of beta-chitin and the preparation of regioselectively esterified chitin derivatives.

New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics.

New nanocomposite films were prepared with atactic polypropylene as the matrix and either of three types of cellulose whiskers, with various surface and dispersion characteristics, as the reinforcing phase: aggregated without surface modification, aggregated and grafted with maleated polypropylene or individualized and finely dispersed with a surfactant. Films obtained by solvent casting from toluene were investigated by means of scanning electron microscopy, dynamic mechanical analysis, and tensile testing. In the linear region, the mechanical properties above the glass-rubber transition were found to be drastically enhanced for the nanocomposites as compared to the neat polypropylene matrix. These effects were ascribed to the formation of a rigid network with filler/filler interactions. In addition, interactions between the filler and the matrix as well as the dispersion quality were found to play a major role on the mechanical properties of the composites when investigation of the films was performed in the nonlinear region.

Structural aspects in semicrystalline samples of the mannan II family.

A series of samples having the mannan II character were prepared by either (i) desincrusting stems of Acetabularia crenulata, or (ii) acetylating these stems, followed by dissolution and recrystallization under deacetylation conditions, or (iii) recrystallizing at low temperature the alkali soluble fraction of ivory nut mannan. The samples were characterized by transmission electron microscopy, X-ray and electron diffraction analysis together with (13)C CP/MAS NMR spectroscopy. Whereas the A. crenulata stems consisted of a mixture of mannan I and mannan II, the recrystallized samples were all of the hydrated mannan II family and occurred in a ribbonlike morphology where the mannan chains were organized with their molecular axis perpendicular to the ribbon long axis. The recrystallized ivory nut mannan samples presented X-ray and electron diffraction diagrams, together with (13)C solid-state NMR spectra recorded at 95% RH, different from those of recrystallized A. crenulata recorded under the same RH conditions. They corresponded therefore to a new allomorph of the mannan II family. Despite this difference, when the recrystallized samples were in an aqueous environment, they revealed an additional well-defined perhydrated phase, which showed the same (13)C solid-state NMR spectrum for both samples. As this phase, which gave 6-band NMR spectra with narrow line-width and low T1, had no counterpart in X-ray diffraction, it was attributed to specific amorphous segments of mannan chains, gaining some mobility when swollen in water. When the samples were totally dried, their NMR spectra lost their resolution, thus indicating the role played by water for the structural organization of the crystalline and amorphous components of mannan II.

Arabinan-cellulose composite in Opuntia ficus-indica prickly pear spines.

The ultrastructure of the spines decorating the cladodes of the cactus Opuntia ficus-indica was investigated by optical microscopy, scanning and transmission electron microscopy, wide angle X-ray, and solid state 13C NMR analyses. Each spine consisted of a compact parallel arrangement of slender cellulosic fibers (0.4 mm in length and 6-10 microm in diameter) with small lumens. The fibers were disencrusted by alkali and sodium chlorite bleaching, yielding a remarkable arabinan-cellulose (1:1) product. X-ray fiber diagrams of the spines before and after purification confirmed the presence of crystalline cellulose domains with molecular axis parallel to the spine axis. CP-MAS 13C T1 NMR data showed a strong interaction at a nanometric level of a fraction of the arabinan and the cellulose crystalline domains. By sequential hydrothermal extractions, followed by a trifluoroacetic acid treatment, a relatively pure cellulose was isolated while the extracted fibers became fibrillated into slender microfibrils having no more than 4-6 nm diameter. The hydrothermal extract yielded the alpha-L-arabinofuranan consisting of a chain of (1-->5)-linked L-arabinosyl residues with branching either at C-2 or C-3 or at both C-2 and C-3. Taken together, these observations suggest that the bulk of the spine fibers consists of an intimate composite of cellulose microfibrils embedded in an arabinan matrix.

Solid state NMR for determination of degree of acetylation of chitin and chitosan.

The degree of acetylation (DA) of various samples has been evaluated by 1H liquid-state NMR and 13C and 15N CP-MAS solid-state NMR over the whole range of DA. A good agreement has been found for all the experiments. The 13C and 15N CP-MAS experiments have permitted the evaluation of the chitin DA and content in the structural polysaccharides in a fungus named Aspergillus niger. The fungus structural carbohydrates mainly consist in pure chitin associated with glucans. Comparison of the 13C CP-MAS spectra with standard (1-->3)-beta-D-glucans strongly suggests that chitin and glucans are linked via covalent bonds.