Impact of loading protocol of a mandibular single implant-supported complete denture on oral health-related quality of life over a period of 5 years: A randomized controlled trial.

OBJECTIVES: The aim of the present study was to assess the long-term course of OHRQoL and the impact of the loading protocol in patients receiving a single mandibular implant supporting a complete denture over a period of five years. METHODS: In this multicenter RCT, a total of 158 edentulous patients were initially included and were randomly allocated immediately after placement of a mandibular midline implant to either immediate loading (IL) or to conventional loading (CL) with submerged healing. The assessment of OHRQoL was performed with the 49-item Oral Health Impact Profile (OHIP) at baseline and 1, 4, 12, 24, and 60 months after loading. At 5-year follow-up, 100 patients (mean age: 69.2 years; 45.0% female) with completed OHIP were available for analyses. A mixed-effects model with patients as random effect and an unstructured covariance matrix was developed to address repeated outcome measurement. RESULTS: The OHRQoL improved substantially after loading, indicated by a decrease of mean OHIP summary scores from 51.0 points at baseline, by 14.2 (95%-CI: 9.4 - 19.1; p<0.001) points to 37.2 points at 1-month follow-up, and by continuous improvement to 20.4 OHIP points at final follow-up. Considering constant treatment effects, the loading protocol had no significant effect on OHIP scores (-3.7, 95%-CI: -9.4 - 2.2; p = 0.204). Time effect was statistically significant with -0.21 (95%-CI: -0.28 - -0.15; p<0.001) points per month. CONCLUSION: Both the immediate and conventional loading of a single mandibular midline implant supporting a complete denture offer long-lasting high levels of OHRQoL, with no significant or clinically relevant long-term differences. CLINICAL SIGNIFICANCE: The study firstly presents long-term data for OHRQoL by investigating the loading protocol of single mandibular implant-supported complete dentures. Since immediate loading has been associated with a reduced implant survival rate for this concept, information on patient benefits is essential for evidence-based decision making.

Oral Health Literacy in Migrant and Ethnic Minority Populations: A Systematic Review.

Cultural background influences how migrants and ethnic minority populations view and assess health. Poor oral health literacy (OHL) may be a hindrance in achieving good oral health. This systematic review summarizes the current quantitative evidence regarding OHL of migrants and ethnic minority populations. The PubMed database was searched for original quantitative studies that explore OHL as a holistic multidimensional construct or at least one of its subdimensions in migrants and ethnic minority populations. 34 publications were selected. Only 2 studies specifically addressed OHL in migrant populations. Generally, participants without migration background had higher OHL than migrant and ethnic minority populations. The latter showed lower dental service utilization, negative oral health beliefs, negative oral health behavior, and low levels of oral health knowledge. Due to its potential influence on OHL, oral health promoting behavior, attitudes, capabilities, and beliefs as well as the cultural and ethnic background of persons should be considered in medical education and oral health prevention programs.

Prevalence and determinants of dental visits among older adults: findings of a nationally representative longitudinal study.

BACKGROUND: The first aim was to present descriptive data on the frequency of dental visits among older adults in Germany. The second aim was to identify the determinants of the number of dental visits using a longitudinal approach. METHODS: Longitudinal data were derived from the German Ageing Survey, which is a nationally representative sample of community-dwelling individuals ≥40 years in Germany. The frequency of dental visits in the past 12 months was recorded in the years 2002, 2008 and 2011. In order to control for time-constant unobserved heterogeneity, Poisson fixed effects regressions were used. RESULTS: While the mean number of dental visits was 2.3 (SD: 2.0) in 2002, it was 2.0 (SD: 1.7) in 2008 and 2.1 (SD: 1.7) in 2011. The frequency of dental visits declined with age (total sample and women), transitions from normal weight to overweight (total sample), changes from divorced/widowed/single/married, living separated from spouse to 'married, living together with spouse' in women and with a decrease in the number of physical illnesses (total sample and men). CONCLUSIONS: The frequency of dental visits declines with age in older adults. While some of the determinants of frequency are non-modifiable (e.g., ageing and worsening of general health), others are modifiable (e.g., change in weight category).

Genetic Susceptibility Contributing to Periodontal and Cardiovascular Disease.

Periodontal disease (PD) and coronary artery disease (CAD) are common diseases characterized by an overaggressive inflammatory response to diverse stimuli. Whereas PD leads to destruction of the tooth-supporting structures, CAD is a chronic inflammatory condition ultimately causing myocardial infarction via narrowing and occluding of blood vessels. Classical twin studies led to the conclusion that both complex diseases have a similar degree of heritability and that a significant fraction of the genetic factors accounting for this heritability is shared. Recent genome-wide association and large-scale candidate gene studies highlight that variations in >50 genes are associated with premature CAD, while variations in only 4 genes showing nominally significant associations with aggressive periodontitis and/or chronic periodontitis have so far been identified. Remarkably, 3 of the PD loci (75%) show shared associations with CAD ( ANRIL/CDKN2B-AS1, PLG, CAMTA1/VAMP3), suggesting involvement of common pathogenic mechanisms. In this critical review, we highlight recent progress in identifying genetic markers and variants associated with PD, present their overlap with CAD, and discuss functional aspects. In addition, we answer why a significant fraction of the heritability of PD is still missing, and we suggest approaches that may be taken to close the gap.

Clinical instruments and methods for assessing physical oral health: A systematic review.

OBJECTIVE: This study aimed at exploring available clinical instruments and methods for assessing physical oral health, and at identifying those with sufficient diagnostic performance. METHODS: A systematic literature search was conducted in Embase and MEDLINE. Identified instruments and methods were critically appraised, and quality of diagnostic performance was rated by two independent reviewers as A (sufficient diagnostic performance), B (either sufficient reliability or validity) or C (insufficient quality, or empirical results unsatisfactory and/or inconsistent). For all A-rated instruments and methods, an in-depth literature search was conducted to supplement and verify their effectiveness and accuracy. RESULTS: A total of 141 instruments and methods were identified. Only 12 methods with sufficient diagnostic performance could be rated as A, 72 were rated as B, and 34 received a C-rating. Further 23 instruments and methods could not be rated due to lack of available information on diagnostic performance. Of all A-rated instruments, six were designed for tooth structure, two for periodontium, one for endodontium and three for temporomandibular joints and muscles. CONCLUSION: Even though some instruments and methods exhibited good to excellent reliability and validity and can be recommended for research and clinical practice, they do not allow assessing all components of physical oral health. There is a need to identify and define standard instruments, and for components of physical oral health where methods with sufficient diagnostic performance are lacking, further research is required.

Pain and discomfort following immediate and delayed loading by overdentures in the single mandibular implant study (SMIS).

OBJECTIVES: This randomized clinical trial compares immediate and delayed loading of single implants to support mandibular overdentures. The aim of this preliminary analysis is to test the hypothesis whether patients with immediate loading will experience less pain and discomfort through the intervention than patients with delayed loading. MATERIALS AND METHODS: Edentulous patients in nine German dental schools received a midline implant with a length of 11 mm. Implants with a minimum insertion torque of 30 Ncm and an implant stability quotient of ≥60 were randomly allocated to group A for immediate loading using ball attachments or to group B for delayed loading after 3 months. Patients completed questionnaires with 100-mm visual analogue scales about the items pain, pain during chewing, swelling, bleeding, and perception of the intervention at the day of surgery and 1, 2, 3, and 7 days, thereafter. Groups were compared by Wilcoxon-Mann-Whitney tests (P ≤ 0.05). RESULTS: The questionnaires of 81 patients in group A and 74 patients in group B were completed. The medians for pain and discomfort were moderate (<30). Participants of group A felt significantly more pain from the first day and more swelling from the third day after implantation than participants of group B. The individual perception of interventions showed no significant differences between groups. CONCLUSIONS: Immediate loading evoked more postoperative pain and swelling than the two stages of delayed loading. CLINICAL RELEVANCE: Immediate loading of a single mandibular midline implant supporting overdentures should be carefully considered.

Single mandibular implant study - denture satisfaction in the elderly.

To investigate whether there are differences in patients' denture satisfaction when an implant placed in the midline of the edentulous mandible is loaded either immediately or three months later, after second-stage surgery. One hundred and fifty-eight edentulous patients received a single implant in the midline of the mandible. After randomisation, it was loaded either immediately after implant placement (N = 81, group A) or three months later, after a submerged healing phase and a second-stage surgery (N = 77, group B). Patients' denture satisfaction aspects were assessed, using visual analogue scales (VAS), before treatment, one month after implant placement during the submerged healing phase (only group B) and one and four months after implant loading. The statistical analysis was performed using the Wilcoxon signed-rank and rank-sum tests. One month after loading, a significant improvement in comfort, function and stability of the mandibular denture could be observed in both groups (P ≤ 0·05). A slight but not significant improvement was found between one and four months after loading. Patients with second-stage surgery and delayed loading rated the stability and fit of the mandibular denture as significantly better than patients who had immediate loading. A single implant in the edentulous mandible significantly increased patients' denture satisfaction. After four months, stability and fit of the mandibular denture were considered better when a delayed loading protocol had been followed. A single mandibular implant in the edentulous mandible significantly increases patients' denture satisfaction, regardless of the loading protocol.

Management of shortened dental arches and periodontal health: 5-year results of a randomised trial.

In a multicentre randomised trial (German Research Association, grants DFG WA 831/2-1 to 2-6, WO 677/2-1.1 to 2-2.1.; controlled-trials.com ISRCTN97265367), patients with complete molar loss in one jaw received either a partial removable dental prosthesis (PRDP) with precision attachments or treatment according to the SDA concept aiming at pre-molar occlusion. The objective of this current analysis was to evaluate the influence of different treatments on periodontal health. Linear mixed regression models were fitted to quantify the differences between the treatment groups. The assessment at 5 years encompassed 59 patients (PRDP group) and 46 patients (SDA group). For the distal measuring sites of the posterior-most teeth of the study jaw, significant differences were found for the plaque index according to Silness and Löe, vertical clinical attachment loss (CAL-V), probing pocket depth (PPD) and bleeding on probing. These differences were small and showed a slightly more unfavourable course in the PRDP group. With CAL-V and PPD, significant differences were also found for the study jaw as a whole. For CAL-V, the estimated group differences over 5 years amounted to 0.27 mm (95% CI 0.05; 0.48; P = 0.016) for the study jaw and 0.25 mm (95% CI 0.05; 0.45; P = 0.014) for the distal sites of the posterior-most teeth. The respective values for PPD were 0.22 mm (95% CI 0.03; 0.41; P = 0.023) and 0.32 mm (95% CI 0.13; 0.5; P = 0.001). It can be concluded that even in a well-maintained.patient group statistically significant although minor detrimental effects of PRDPs on periodontal health are measurable.

Development and validation of the Burdens in Oral Surgery Questionnaire (BiOS-Q).

Patients' perspective is increasingly re-cognised as an important outcome measure in oral surgery. However, how patients perceive the surgical treatment cannot be assessed currently. This would be an important indicator for process-related quality of care. It was the aim to develop and to validate an instrument for the assessment of patient-based measures of process-related quality of care in oral surgery. The new Burdens in Oral Surgery Questionnaire (BiOS-Q) was developed in two steps in patients undergoing oral surgery. First, an item pool was created using semi-structured interviews in 90 patients. Second, a preliminary version was applied in 297 consecutively recruited patients to assess redundancy, completion rates, face validity, difficulty and distribution. Psychometric properties of the final version of the questionnaire were evaluated. The BiOS-Q consists of 16 items and showed satisfactory internal consistency (Cronbach's alpha = 0·84) and excellent test-retest reliability (ICC = 0·90). The questionnaire's mean score was significantly correlated with dentists' burdens (r = 0·44) and patients' overall satisfaction (r = 0·39) indicating sufficient validity. The BiOS-Q is a reliable and valid instrument for the assessment of patient-based process-related quality of care in oral surgery.

The randomized shortened dental arch study: tooth loss over five years.

OBJECTIVES: The study was designed to provide clinical outcome data for two treatments of the shortened dental arch (SDA). MATERIAL AND METHODS: In a multicenter randomized controlled clinical trial, patients with complete molar loss in one jaw were provided with either a partial removable dental prosthesis (PRDP) retained with precision attachments or treated according to the SDA concept preserving or restoring a premolar occlusion. No implants were placed. The primary outcome was tooth loss. RESULTS: Of 152 treated patients, 132 patients reached the 5-year examination. Over 5 years, 38 patients experienced tooth loss. For the primary outcome tooth loss, the Kaplan-Meier survival rates at 5 years were 0.74 (95% CI 0.64, 0.84) in the PRDP group and 0.74 (95% CI 0.63, 0.85) in the SDA group. For tooth loss in the study jaw, the survival rates at 5 years were 0.88 (95% CI 0.80, 0.95) in the PRDP group and 0.84 (95% CI 0.74, 0.93) in the SDA group. The differences were not significant. No Cox regression models of appropriate fit explaining tooth loss on the patient level could be found. CONCLUSIONS: The overall treatment goals of a sustainable oral rehabilitation and the avoidance of further tooth loss over longer periods were not reliably achievable. The influence of the type of prosthetic treatment on tooth loss might have been overestimated. CLINICAL RELEVANCE: Regarding our results, the patient's view will gain even more importance in the clinical decision between removable and fixed restorations in SDAs.

The randomized shortened dental arch study: 5-year maintenance.

The scientific evidence concerning prosthodontic care for the shortened dental arch (SDA) is sparse. This randomized multicenter study aimed to compare two common treatment options: removable partial dental prostheses (RPDPs) for molar replacement vs. no replacement (SDA). One of the hypotheses was that the follow-up treatment differs between patients with RPDPs and patients with SDAs during the 5-year follow-up period. Two hundred and fifteen patients with complete molar loss in one jaw were included in the study. Molars were either replaced by RPDPs or not replaced according to the SDA concept. A mean number of 4.2 (RPDP) and 2.8 (SDA) treatments for biological or technical reasons occurred during the 5-year observation time per patient. Concerning the biological aspect, no significant differences between the groups could be shown, whereas treatment arising from technical reasons was significantly more frequent for the RPDP group. When the severity of treatment was analyzed, a change over time was evident. When, at baseline, only follow-up treatment with minimal effort is required, over time there is a continuous increase to moderate and extensive effort observed for both groups (Controlled-trials.com number ISRCTN97265367).

The effectiveness of 2-implant overdentures - a pragmatic international multicentre study.

The purpose of this multicentre observational study was to determine patient satisfaction with either conventional dentures or mandibular 2-implant overdentures in a 'real world' setting. Two hundred and three edentulous patients (mean age 68·8 ± 10·4 years) were recruited at eight centres located in North America, South America and Europe. The patients were provided with new mandibular conventional dentures or implant overdentures supported by two implants and ball attachments. At baseline and at 6 months post-treatment, they rated their satisfaction with their mandibular prostheses on 100-mm visual analogue scale questionnaires. One hundred and two (50·2%) participants had valid baseline and 6-month satisfaction data. Although both groups reported improvements, the implant overdenture group reported significantly higher ratings of overall satisfaction, comfort, stability, ability to speak and ability to chew. These results suggest that edentulous patients who choose mandibular implant overdentures have significantly greater improvements in satisfaction, despite their relatively higher cost, than those who choose new conventional dentures.

The randomized shortened dental arch study: tooth loss.

The evidence concerning the management of shortened dental arch (SDA) cases is sparse. This multi-center study was aimed at generating data on outcomes and survival rates for two common treatments, removable dental prostheses (RDP) for molar replacement or no replacement (SDA). The hypothesis was that the treatments lead to different incidences of tooth loss. We included 215 patients with complete molar loss in one jaw. Molars were either replaced by RDP or not replaced, according to the SDA concept. First tooth loss after treatment was the primary outcome measure. This event occurred in 13 patients in the RDP group and nine patients in the SDA group. The respective Kaplan-Meier survival rates at 38 months were 0.83 (95% CI: 0.74-0.91) in the RDP group and 0.86 (95% CI: 0.78-0.95) in the SDA group, the difference being non-significant.

Effect of non-working occlusal contacts on vertical condyle position.

The presence of non-working occlusal contacts is often considered harmful for the temporomandibular joint. Thus, the purpose of this study was to investigate the effect of non-working occlusal contacts on the condylar position during submaximal and maximal clenching. The study comprised 22 healthy subjects having a canine-guided occlusion. None of them had a third molar and none of them had a missing tooth or showed tooth mobility. All subjects clenched on (i) the canine, (ii) the canine while a stiff bite registration material was positioned between the second premolar and the first molar on the non-working side. The clenching level was controlled by surface electromyography of the masseter muscle. During clenching, the vertical and horizontal condylar position was predicted using six degrees of freedom ultrasonic motion analyser. Clenching on the canine caused a cranial movement of the non-working side condyle. This movement was reduced by 0.6-0.9 mm when the subjects clenched while the artificial non-working side contacts were in place. These results indicate that the contacts on the non-working side may be able to prevent upward joint movement.

[Effects of removable partial dentures on the quality of life in people with shortened dental arches]. / Het effect van partiële gebitsprothesen op de levenskwaliteit bij mensen met verkorte tandbogen.

In order to assess the enhanced value of removable partial dentures on the quality of life, patients at 2 university clinics were screened for the presence of complete or shortened dental arches. Those selected were assigned to 1 of 5 subgroups: 1) a shortened dental arch with all frontal teeth, 2) a shortened dental arch with one or more frontal diastemas, 3) a shortened dental arch with all frontal teeth, restored by a removable partial denture, 4) a shortened dental arch and several diastemas, restored by a removable partial denture, 5) a complete dental arch. The participants completed the Oral Health Impact Profile (OHIP-49) and the Short Form Health Survey (SF-36). Clinical data recorded were: whether any teeth were missing and if so which, whether or not these had been replaced by a removable partial denture, and the number of occluding pairs of (pre)molars. The results revealed that a shortenend dental arch has a certain impact on the quality of life. However, the participants only experienced benefits from a removable partial denture if the denture also replaced frontal teeth.

Results of a prospective randomized controlled trial of posterior ZrSiO(4)-ceramic crowns.

The aim of this randomized controlled clinical trial was to evaluate over a 5-year period, the clinical outcome of shrinkage-free ZrSiO(4)-ceramic (KaVo Everest HPC) full coverage crowns on posterior teeth in comparison with conventional gold crowns that served as the control. This study reports results of a 5-year study protocol up to 24 months. Patients totalling 224 were randomly divided into two treatment groups. Of these, 123 patients were restored with 123 Everest HPC crowns, fabricated by the Kavo Everest computer-aided manufacturing (CAM) procedure and 101 patients received 101 gold crowns, but two were excluded from analysis. All crowns were conventionally cemented with glass-ionomer cement. After an observation period of 6, 12 and 24 months, the prospective survival rates (Kaplan-Meier) for the KaVo Everest HPC crowns were 97.9%, 95.1% and 89.8% and for the gold crowns 100%, 94.8% and 92.7%, respectively. There were no significant differences between the two groups (P = 0.2). The 1-year failure rates were 4.9% for the KaVo Everest HPC crowns and 5.2% for the gold crowns. The 1-year cumulative risks for loss of vitality, secondary caries, fractures, loss of crown and extraction of abutment of the analyzed abutments (88) were 8.9%, 0%, 0%, 1.1% and 1.1%, respectively, for the gold crowns and 2.8%, 0%, 4.7%, 0% and 0.9%, respectively, for the ceramic crowns (107 analyzed abutments). No perfect marginal fit was shown by 49.5% of the evaluated ceramic crowns and 26.1% of the gold crowns. Only 1.9% of the KaVo Everest HPC crowns had a marginal crevice. In conclusion, Everest HPC crowns with an adequate occlusal tooth reduction of >1.5 mm are suitable for posterior restorations, but the marginal fit shows a potential for improvement.

Material characteristics of a novel shrinkage-free ZrSiO(4) ceramic for the fabrication of posterior crowns.

OBJECTIVE: To confirm the clinical applicability of a novel ZrSiO(4) (zircon) based shrinkage-free ceramic material, the flexural strength, fracture toughness and chemical solubility were tested. In addition, the fracture load of full crowns made from this material was tested after cyclic thermomechanical loading. METHODS: Flexural strength of 12 specimens was measured using a biaxial bending test. Fracture toughness was measured using 10 slotted box shaped specimens. The specimens were fractured using a universal testing machine; fracture loads were recorded. A chemical solubility test was performed in accordance with ISO norm 6872. Additionally, 32 ZrSiO(4) all-ceramic crowns were fabricated on extracted caries-free human molars. Sixteen Empress 2 and 16 PFM crowns served as a reference control. After artificial aging of 1.2 million cycles in the chewing simulator, the survival rate of the crowns was determined. The fracture load of all surviving specimens was obtained by loading the crowns until fracture in a universal testing machine. RESULTS: A flexural strength of 328MPa was found. The fracture toughness of the ZrSiO(4) ceramic was 5.16MPam(0.5). The chemical solubility amounted to 7.2microg/cm(2). All specimens survived the chewing simulation (survival rate: 100%); no crowns had to be re-cemented. A mean fracture strength of 1790N was found for Everest HPC for Empress 2 crowns, 1715N for Empress 2 crowns and 2416N for PFM crowns. Fracture loads of PFM crowns were significantly higher than for Empress 2 crowns (P=0.032) as well as ZrSiO(4)-crowns (P=0.007). There was no significant difference between ZrSiO(4)-crowns and Empress 2 crowns (P=0.743). SIGNIFICANCE: At the present stage, Everest HPC can be recommended for the fabrication of single crowns as an alternative to conventional PFM and other all-ceramic crowns, because its fracture strength exceeds average masticatory forces in the posterior region.

Fracture load and marginal fit of shrinkage-free ZrSiO4 all-ceramic crowns after chewing simulation.

The aim of this in vitro study was to evaluate the fracture load and marginal accuracy of crowns made from a shrinkage-free ZrSiO4 ceramic cemented with glass-ionomer or composite cement after chewing simulation. Thirty-two human mandibular molars were randomly divided into two groups. All teeth were prepared for and restored with shrinkage-free ZrSiO4 ceramic crowns (Everest HPC, KaVo). The crowns of group A (N = 16) were luted to the teeth using KetacCem and group B (N = 16) were adhesively cemented using Panavia21EX. Measurements of the marginal accuracy before and after cementation were made using replicas and an image analysis system. All specimens were exposed to 1.2 million cycles of thermo-mechanical fatigue in a chewing simulator. Surviving specimens were subsequently loaded until fracture in a static testing device. Fracture loads (N) were recorded. All specimens survived chewing simulation. The mean fracture loads (+/-s.d.) were Group A, 1622 N (+/-433); group B, 1957 N (+/-806). There was no significant difference between the two groups (P > 0.05). The marginal gap values before cementation were (mean +/- s.d.): Group A, 32.7 microm (+/-6.8); group B, 33.0 microm (+/-6.7). The mean marginal gap values after cementation were (+/-s.d.): Group A, 44.6 microm (+/-6.7); group B, 46.6 microm (+/-7.7). The marginal openings were significantly higher after cementation for both groups (P < 0.05). All test groups demonstrated fracture load and marginal accuracy values within the range of clinical acceptability.

Effects of prosthetic treatment for shortened dental arches on oral health-related quality of life, self-reports of pain and jaw disability: results from the pilot-phase of a randomized multicentre trial.

A multi-centre randomized clinical trial is under way at 14 university dental schools in Germany to compare prosthodontic treatments for the shortened dental arch (SDA). One of the aims of this pilot-study was to measure the effect of two treatment options of the SDA on oral health-related quality of life and on the Research Diagnostic Criteria (RDC) for temporomandibular disorders (TMD). Thirty-four patients participated in the pilot-study. Inclusion criteria were: all molars were missing and the presence of at least both canines and one premolar in each quadrant. Participants were randomly assigned to receive either removable partial dentures including molar replacement (RPD_group) or retain a premolar occlusion (PROC_group). The Oral Health Impact Profile (OHIP-49) and the RDC for TMD were completed by participants before treatment (pre-treatment), 6 weeks (6 wks), 6 months (6m) and 12 months (12 m) after treatment. At the 12-month follow up, data of 10 women and 11 men (mean age: 62 +/- 10 years) were available. Medians of the OHIP total-scores were as follows: RPD (n = 10), 43.5 (pre-treatment), 18.2 (6 wks), 13.3 (6m), 14.7 (12 m). PROC (n = 11): 31.8 (pre-treatment), 27.1 (6 wks), 8.8 (6m), 8.3 (12 m). Significant differences were shown for RPD_group between pre-treatment and 6m/12 m and for PROC_group between pre-treatment and 6m. There were no significant differences between treatment groups at any time. Within each group, an improvement of life-quality was observed. No significant difference could be reported between the two therapy concepts. This may be due to the low sample size within the pilot study.

Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation.

The aim of this study was to compare titanium-reinforced ZrO(2) and pure Al(2)O(3) abutments regarding their outcome after chewing simulation and static loading. Forty-eight standard diameter implants with an external hexagon were divided into three groups of 16 implants each and restored with three different types of abutments (group A: ZrO(2) abutments with titanium inserts; group B: Al(2)O(3) abutments; group C: titanium abutments). All abutments were fixated on the implants with gold-alloy screws at 32 Ncm torque, and metal crowns were adhesively cemented onto the abutments. The specimens were exposed to 1.2 million cycles in a chewing simulator. Surviving specimens were subsequently loaded until fracture in a static testing device. Fracture loads (N) and fracture modes were recorded. A Wilcoxon Rank test to compare fracture loads among the three groups and a Fisher exact test to detect group differences in fracture modes were used for statistical evaluation (P < 0.05). All specimens but one of group B survived chewing simulation. No screw loosening occurred. The median fracture loads (+/-s.d.) were as follows: group A, 294 N (+/-53); group B, 239 N (+/-83), and group C, 324 N (+/-85). The smaller fracture loads in group B were statistically significant. The use of pure Al(2)O(3) abutments resulted in significantly more abutment fractures. It is proposed that titanium-reinforced ZrO(2) abutments perform similar to metal abutments, and can therefore be recommended as an aesthetic alternative for the restoration of single implants in the anterior region. All-ceramic abutments made of Al(2)O(3) possess less favourable properties.