Prosthodontic treatment can improve the ingestible food profile in Japanese adult outpatients.

PURPOSE: To investigate the effect of prosthodontic treatment on the ingestible food profile in adult Japanese outpatients, and to identify the related risk factors that can deteriorate the profile. METHODS: The participants were 277 outpatients who visited university-based specialty clinics in Japan for prosthodontic treatment. The demographic data, number of present teeth assessed via intraoral examination, and oral health-related quality of life assessed by the total Oral Health Impact Profile (OHIP-J54) scores of all participants were recorded before treatment. Ingestible food profile score (IFS) was recorded using a validated food intake questionnaire. Eligible participants who answered the questionnaire before and after treatment were categorized into five groups based on the prosthodontic treatments they received (i.e., crowns, bridges, removable partial dentures, removable complete dentures, and removable complete and partial dentures). RESULTS: Multivariate analysis of covariance revealed a statistically significant main effect of prosthodontic intervention (time course: before and after treatment) on mean IFS (P=0.035, F=4.526), even after adjusting for covariates (age, number of present teeth, and treatment modality). Multiple linear regression analysis revealed that the low number of present teeth (r=0.427, P<0.001) and a high OHIP-J54 total score (r=-0.519, P<0.001) of the patients at the baseline were significantly associated with their baseline IFSs, even after adjusting for confounding variables. CONCLUSIONS: The findings of this multicenter follow-up study indicate the importance of prosthodontic rehabilitation in improving patients' ingestible food profiles.

Effect of the haptic 3D virtual reality dental training simulator on assessment of tooth preparation.

BACKGROUND/PURPOSE: The haptic 3D virtual reality dental training simulator has been drawn attention as a educational strategy in Covid-19 pandemic. The purpose of this study is to investigate the feature of the haptics simulator in comparison with a conventional mannequin simulator by analyzing the assessment of products prepared by dental students using these two kinds of simulator. MATERIALS AND METHODS: The subjects were 30 students in the sixth-year classes of the faculty of dentistry. Abutments for a full cast crown were prepared by each subject using two kinds of simulator; one is the haptics simulator and the other is a mannequin simulator. For the resulted products, occlusal surface form, margin design, surface smoothness, taper angle, total cut volume and overall impression were rated by 3 evaluators. Score differences between two simulators were statistically analyzed. RESULTS: The kinds of simulator affected subject performance for margin design and total cut volume. The differences in cutting feeling between the simulators as well as variation of stereoscopic ability in subjects were considerable reasons. Evaluators' rating was affected by difference in simulators for occlusal surface form, total cut volume, and overall impression. This may have been due to variation of stereoscopic ability in evaluators. CONCLUSION: The unique characteristics of virtual reality, such as the simulated cutting sensation and the simulated three-dimensional images created by stereo viewers, affect operators' performance and evaluators' rating. It was suggested that educational programs need to be constructed taking account of the characteristics of virtual reality to make the best use of the haptics simulator.

Evaluation of Respiratory Resistance as a Predictor for Oral Appliance Treatment Response in Obstructive Sleep Apnea: A Pilot Study.

The aim of this study was to determine the utility of respiratory resistance as a predictor of oral appliance (OA) response in obstructive sleep apnea (OSA). Twenty-seven patients with OSA (mean respiratory event index (REI): 17.5 ± 6.5 events/h) were recruited. At baseline, the respiratory resistance (R20) was measured by impulse oscillometry (IOS) with a fitted nasal mask in the supine position, and cephalometric radiographs were obtained to analyze the pharyngeal airway space (SPAS: superior posterior airway space, MAS: middle airway space, IAS: inferior airway space). The R20 and radiographs after the OA treatment were evaluated, and the changes from the baseline were analyzed. A sleep test with OA was carried out using a portable device. The subjects were divided into Responders and Non-responders based on an REI improvement ≥ 50% from the baseline, or REI < 5 after treatment, and the R20 reduction rate between the two groups were compared. The subjects comprised 20 responders and 7 non-responders. The R20 reduction rate with OA in responders was significantly greater than it was in non-responders (14.4 ± 7.9 % versus 2.4 ± 9.8 %, p < 0.05). In responders, SPAS, MAS, and IAS were significantly widened and R20 was significantly decreased with OA (p < 0.05). There was no significant difference in non-responders (p > 0.05). A logistic multiple regression analysis showed that the R20 reduction rate was predictive for OA treatment responses (2% incremental odds ratio (OR), 24.5; 95% CI, 21.5-28.0; p = 0.018). This pilot study confirmed that respiratory resistance may have significant clinical utility in predicting OA treatment responses.

Influence of the Covering Area of Major Connectors of Mandibular Dentures on the Accuracy of Speech Production: A Pilot Study.

BACKGROUND/OBJECTIVES: Speech impairment during the initial phase of removable partial denture (RPD) treatment can prevent patient adaptation to RPDs. This quasi-experimental study aimed to investigate the influence of the covering area of major connectors located in the mandibular anterior region on the accuracy of speech production. METHODS: Fifteen adults (12 men and 3 women aged 26-40 years) with healthy dentition were recruited. Four target syllables were used for the assessments: [ʃi], [ʧi], [çi], and [ki]. There were four speaking conditions: without a connector (control), wearing lingual bar (5 mm width), wearing lingual plates (12 mm width), and wearing connectors covering the occlusal surface of lower dentition (16 mm width; CO). The accuracy of speech production was evaluated by mean appearance ratio of correct labels (MARC) and incorrect labels (MARIC) of the phonetic segments which were calculated with a speech evaluation system (VoiceAnalyzer). RESULTS: The MARC in the 3 target syllables [ʃi], [ʧi], and [ki] significantly decreased with CO. For the target syllable [ʃi], the MARICs of [ʧi], [ʤi], and [çi] with CO were significantly lower than that in the control. For the target syllable [ʧi], the MARIC of [ki] with CO was significantly higher than that in the control. For the target syllable [çi], the MARIC of [gi] with CO was significantly higher than that in the control. CONCLUSION: RPDs with major connectors covering the lower dentition could disturb speech production during the initial phase of RPD treatment. Prosthodontic treatment with such RPD designs requires further consideration regarding the information given to patients before starting the treatment.

Influence of Oral Morphology on Speech Production in Subjects Wearing Maxillary Removable Partial Dentures with Major Connectors.

BACKGROUND/AIMS: Speech impairment during the initial phase of removable partial denture (RPD) treatment can prevent patient adaptation to RPDs. This study was undertaken to investigate the influence of oral morphology on speech production in subjects wearing RPDs with major connectors. METHODS: Two types of connectors were fabricated for 17 subjects with normal dentitions: covering the middle palate (M-bar) and the anterior/posterior palate (AP-bar). Four target sounds ([∫i], [t∫i], [çi], and [ki]) were evaluated under 3 recording conditions: no connector, M-bar, and AP-bar. The mean appearance ratios of correct labels (MARCs) were calculated as parameters representing speech production accuracy with the speech evaluation system. Subgroup analysis was conducted based on palate height, dental arch width, and front space volume of the oral cavity. RESULTS: Based on the multiple linear regression test, a significant association was found between the MARCs of [∫i] with M-bar and front space (p = 0.036). In the subgroup analysis, the AP-bar had a significant effect on the MARCs of [∫i] among subjects with high palate (p = 0.026), narrow arch (p = 0.004), and small front space (p = 0.014). CONCLUSION: RPDs with major connectors could disturb speech production among patients with high palates, narrow arches, and small front spaces.

A multi-centered epidemiological study evaluating the validity of the treatment difficulty indices developed by the Japan Prosthodontic Society.

PURPOSE: The Japan Prosthodontic Society developed a multi-axis assessment protocol to evaluate the complex variations in patients who need prosthodontic care, and to classify the level of treatment difficulty. A previous report found the protocol to be sufficiently reliable. The purpose of this multi-center cohort study was to evaluate the validity of this multi-axis assessment protocol. METHODS: The treatment difficulty was evaluated using the multi-axis assessment protocol before starting prosthodontic treatment. The time required for active prosthodontic treatment, medical resources such as treatment cost, and changes in the oral health-related QOL before and after treatment, were evaluated after treatment completion. The construct validity of this protocol was assessed by the correlation between the dentist's pre-operative subjective assessment of the treatment difficulty, and the level of difficulty determined by this protocol. The predictive validity was assessed estimating the correlations between a "comprehensive level of treatment difficulty" based on the four axes of this protocol and total treatment cost, total treatment time, and changes in the oral health-related QOL before and after treatment. RESULTS: The construct validity of this protocol was well documented except for psychological assessment. Regarding the predictive validity, the comprehensive level of treatment difficulty assessed before treatment was significantly correlated with the three surrogate endpoints known to be related to the treatment difficulty (total treatment cost, treatment time, and improvement in the oral health-related QOL). To further clarify the validity of the protocol according to patients' oral condition, a subgroup analysis by defects was performed. Analyses revealed that treatment difficulty assessment before treatment was significantly related to one or two surrogate endpoints in the fully edentulous patients and the partially edentulous patients. No significant relationship was observed in the patients with mixture of full/partial edentulism and the patients with teeth problems, possibly due to the small sample size in these groups. CONCLUSION: This study revealed that the multi-axis assessment protocol was sufficiently valid to predict the level of treatment difficulty in prosthodontic care in patients with fully edentulous defects and with partially edentulous defects.

[Oral Appliance Therapy for Sleep Apnea.]

Sleep apnea syndrome(SAS)was revealed to be a modern disease because of the skeletal morphology, lifestyle habit and mental stress of modern humans. Approximately 400 thousand SAS patients have been diagnosed and treated in Japan and numbers of potential SAS patients were estimated at more than 5 millions. Contemporary therapy for SAS is continuous positive airway pressure(CPAP)therapy in medical for moderate or severe SAS and oral appliance(OA)therapy in dental for mild SAS patients. However recent study shows OA therapy is effective even for moderate or severe SAS. In this review, outlines and current status of OA therapy will be discussed.

Effect of jaw-opening exercise on prevention of temporomandibular disorders pain associated with oral appliance therapy in obstructive sleep apnea patients: A randomized, double-blind, placebo-controlled trial.

PURPOSE: There are no studies on the prevention of temporomandibular joint and/or masticatory muscle pain (TMD pain) associated with oral appliance (OA) therapy in patients with obstructive sleep apnea (OSA). The aim of this study was to determine the effect of jaw-opening exercise on TMD pain associated with OA therapy in OSA patients. METHODS: Twenty-five OSA patients without pain-related TMD were consecutively enrolled into a two-arm, randomized, double-blind, placebo-controlled trial. One group performed jaw-opening exercise (JE, n=13), and the other group performed placebo exercise (PE, n=12) for 1-month, and had started 2-weeks prior to insertion of an adjustable OA. TMD sign using the Research Diagnostic Criteria for Temporomandibular Disorders and TMD pain intensity using a visual analog scale (VAS) in the morning and daytime were evaluated at baseline (pre-exercise) and at 2-weeks, 1-month, and 3-months after OA insertion. RESULTS: Pain-related TMD was not observed in the JE-group at all evaluation periods, although one subject in the PE-group was diagnosed with arthralgia at the 1-month evaluation. The JE-group showed lower morning and daytime VAS scores than the those of the PE-group at all evaluation periods, and significant group differences were found in terms of chewing pain and jaw-opening pain in the morning at the 1-month evaluation, and of jaw-opening pain during daytime at the 3-month evaluation (P<0.05). CONCLUSIONS: Within the limitations of the study, jaw-opening exercise prior to OA therapy reduced the risk of TMD pain associated with OA use. Therefore, jaw-opening exercise may contribute to the prevention of TMD pain.

Influence of the width and cross-sectional shape of major connectors of maxillary dentures on the accuracy of speech production.

OBJECTIVE: To investigate the effects of the width and cross-sectional shape of the major connectors of maxillary dentures located in the middle area of the palate on the accuracy of phonetic output of consonants using an originally developed speech recognition system. PATIENTS AND METHODS: Nine adults (4 males and 5 females, aged 24-26 years) with sound dentition were recruited. The following six sounds were considered: [∫i], [t∫i], [ɾi], [ni], [çi], and [ki]. The experimental connectors were fabricated to simulate bars (narrow, 8-mm width) and plates (wide, 20-mm width). Two types of cross-sectional shapes in the sagittal plane were specified: flat and plump edge. The appearance ratio of phonetic segment labels was calculated with the speech recognition system to indicate the accuracy of phonetic output. Statistical analysis was conducted using one-way ANOVA and Tukey's test. RESULTS: The mean appearance ratio of correct labels (MARC) significantly decreased for [ni] with the plump edge (narrow connector) and for [ki] with both the flat and plump edge (wide connectors). For [çi], the MARCs tended to be lower with flat plates. There were no significant differences for the other consonants. CONCLUSION: The width and cross-sectional shape of the connectors had limited effects on the articulation of consonants at the palate.

A multi-centered epidemiological study evaluating the reliability of the treatment difficulty indices developed by the Japan Prosthodontic Society.

BACKGROUND: The diagnostic assessment of the level of difficulty in treating patients who need prosthodontic care is useful to establish a medico-economically efficient system with primary care dentists and prosthodontic specialists. MATERIALS AND METHODS: A multi-axis assessment protocol was established using the newly established treatment difficulty indices. The protocol contains Axis I: oral physiological conditions (e.g., teeth damage and/or missing teeth); Axis II: general health and sociological conditions (e.g., medical disorders); Axis III: oral health-related quality of life (OHRQOL; e.g., oral health impact profile: OHIP); and Axis IV: psychological health (e.g., mood, anxiety, somatoform disorders). A preliminary study on the test-retest consistency of the protocol was conducted to check the levels of reliability of the indices prior to a large-scale, multi-center cohort study on the validity of the protocol. RESULTS: The test-retest consistency in terms of the oral physiological condition (Axis I) after data reduction was 0.82 [corrected] for patients with teeth problems, 0.73 [corrected] for partially edentulous patients, and 0.78 [corrected] for edentulous patients. The reliability for general health and sociological conditions (Axis II), OHRQOL (Axis III), and psychological health (Axis IV) were 0.88, 0.74, and 0.61, respectively. These values reflect either "sufficient agreement" or "excellent agreement" in accordance with the criteria established by Landis and Koch (1977) [1]. CONCLUSION: This protocol is the first multi-axis assessment scheme introduced for prosthodontic treatment with sufficient reliability. This new system is therefore expected to have a significant impact on future dental diagnostic nomenclature systems.

Influence of the major connector in a maxillary denture on phonetic function.

PURPOSE: The purpose of this study was to investigate the influence of the major connector in a maxillary denture. METHODS: Eight patients with sound dentition were recruited in this study. The experimental connectors were fabricated with Co-Cr. Two positional designs were used: one was the middle type (M), and the other was the anterior and posterior type (AP). The six sounds, /shi/, /hi/, /chi/, /ki/, /ri/, and /ni/, were chosen as the test sounds. Using a speech recognition system, the intelligibility, change and duration of the test sounds were evaluated under three conditions: without connector (WO·C), with the M-type connector (W·M), and with the AP-type connector (W·AP). RESULTS: The intelligibility in WO·C and W·AP was 86.9 ± 17.4% and 57.1 ± 30.1% for /shi/, 79.2 ± 19.7% and 70.5 ± 27.0% for /hi/, 74.7 ± 14.6% and 43.6 ± 24.3% for /chi/, 54.4 ± 16.5% and 23.2 ± 17.8% for /ki/, 85.2 ± 15.9% and 55.1 ± 30.6% for /ri/, and 76.9 ± 26.9% and 50.2 ± 31.3% for /ni/. Significant differences were recognized between WO·C and W·AP in /shi/, /chi/, /ki/ and /ri/(P<0.01). The intelligibility in W·M was higher than that in W·AP in all test sounds. As for incorrect labels, significant differences were recognized in the appearance ratio of /hi/ as the incorrect label in the test sound /shi/ (P<0.05). There were significant differences in some incorrect labels of /hi/ and /chi/. As for duration of consonant part, there was no significant difference in each test sound. CONCLUSION: It was indicated that the middle type of the major connector would be recommended from a viewpoint of phonetic function.

Effect of mold temperatures on interface between primary and secondary castings of cast-on method for precision metal frameworks.

PURPOSE: The purpose of the present study was to obtain fundamental data for application of the cast-on method by evaluating the effect of mold temperatures on the interface between primary and secondary castings in detail. METHODS: Silver-palladium-gold alloy (Ag-Pd-Au), type-4 gold alloy (Type4), and chromium-cobalt alloy (Cr-Co) were used in the present study. A polished flat, square metal plate, 10.0 mm x10.0 mm x 1.0 mm, was used as the primary casting. A wax pattern, 2.0 mm in diameter and 2.0 mm thick, was prepared for the secondary casting and invested together with the primary casting. The mold was heated at 600, 700 and 800 degrees C for Ag-Pd-Au and Type4, and 700, 800 and 900 degrees C for Cr-Co. After casting, the mold was embedded and sectioned. The cross-section was observed using a scanning electron microscope (SEM) and analyzed using energy dispersive X-ray spectroscopy (EDS). The gaps between the primary and secondary castings were analyzed for each alloy by analysis of variance and Tukey's honestly significant difference test. The significance level was set at 0.05. The heated primary casting without the secondary casting was examined using a thin film X-ray diffractometer (XRD). RESULTS: Gaps were observed between the primary and secondary castings in all examined conditions. The primary casting surface was covered with oxide layers such as CuO and Cr(2)O(3), and became rough with an increase of the mold temperature. CONCLUSIONS: The results suggested that the cast-on method was influenced by the mold temperature.

Reproducibility of interocclusal recording for mandibular removable partial denture in bilateral distal extension cases.

Interocclusal recording for removable partial denture in bilateral mandibular distal extension were evaluated for the differences of the interocclusal recording material utilized during different impression techniques. The purpose of this study is to develop interocclusal recording utilizing occlusion rims with high accuracy. The intraoral model with urethane rubber mucosa with 3 metallic spheres as measuring points was utilized. With the applied pressure (functional) and minimum pressure (anatomical) impression techniques, working casts were fabricated. Interocclusal recording was registered with the occlusion rim on the intraoral model unto the articulator by applying the interocclusal materials; paraffin wax (PW), ALUWAX (AW), impression paste (IP) and Exabite II (EB). Analyses were conducted with the three-dimensional analyzer and calculated for the amount of vertical and antero-posterior displacement between the intraoral model and the working cast. The results were that PW had the greatest displacement, especially with the functional impression technique, while AW had minimum displacement especially in the posterior direction. With the functional impression technique utilizing AW was revealed to minimize the amount of interocclusal displacement.