Stainless steel surface functionalization for immobilization of antibody fragments for cardiovascular applications.

Stainless steel 316 L material is commonly used for the production of coronary and peripheral vessel stents. Effective biofunctionalization is a key to improving the performance and safety of the stents after implantation. This paper reports the method for the immobilization of recombinant antibody fragments (scFv) on stainless steel 316 L to facilitate human endothelial progenitor cell (EPC) growth and thus improve cell viability of the implanted stents for cardiovascular applications. The modification of stent surface was conducted in three steps. First the stent surface was coated with titania based coating to increase the density of hydroxyl groups for successful silanization. Then silanization with 3 aminopropyltriethoxysilane (APTS) was performed to provide the surface with amine groups which presence was verified using FTIR, XPS, and fluorescence microscopy. The maximum density of amine groups (4.8*10(-5) mol/cm(2)) on the surface was reached after reaction taking place in ethanol for 1 h at 60 °C and 0.04M APTS. On such prepared surface the glycosylated scFv were subsequently successfully immobilized. The influence of oxidation of scFv glycan moieties and the temperature on scFv coating were investigated. The fluorescence and confocal microscopy study indicated that the densest and most uniformly coated surface with scFv was obtained at 37 °C after oxidation of glycan chain. The results demonstrate that the scFv cannot be efficiently immobilized without prior aminosilanization of the surface. The effect of the chemical modification on the cell viability of EPC line 55.1 (HucPEC-55.1) was performed indicating that the modifications to the 316 L stainless steel are non-toxic to EPCs.

Growth and characterization of ceria thin films and Ce-doped γ-Al2O3 nanowires using sol-gel techniques.

γ-Al(2)O(3) is a well known catalyst support. The addition of Ce to γ-Al(2)O(3) is known to beneficially retard the phase transformation of γ-Al(2)O(3) to α-Al(2)O(3) and stabilize the γ-pore structure. In this work, Ce-doped γ-Al(2)O(3) nanowires have been prepared by a novel method employing an anodic aluminium oxide (AAO) template in a 0.01 M cerium nitrate solution, assisted by urea hydrolysis. Calcination at 500 °C for 6 h resulted in the crystallization of the Ce-doped AlOOH gel to form Ce-doped γ-Al(2)O(3) nanowires. Ce(3+) ions within the nanowires were present at a concentration of < 1 at.%. On the template surface, a nanocrystalline CeO(2) thin film was deposited with a cubic fluorite structure and a crystallite size of 6-7 nm. Characterization of the nanowires and thin films was performed using scanning electron microscopy, transmission electron microscopy, electron energy loss spectroscopy, x-ray photoelectron spectroscopy and x-ray diffraction. The nanowire formation mechanism and urea hydrolysis kinetics are discussed in terms of the pH evolution during the reaction. The Ce-doped γ-Al(2)O(3) nanowires are likely to find useful applications in catalysis and this novel method can be exploited further for doping alumina nanowires with other rare earth elements.

Surface characterization of aspirin crystal planes by dynamic chemical force microscopy.

Tapping mode (TM) atomic force microscopy (AFM) has been applied in a novel fashion to characterize and distinguish the (001) and (100) surfaces of individual aspirin crystals. The surface characterization was achieved by amplitude-phase, distance (a-p,d) measurements employing gold-coated AFM probes functionalized with self-assembled monolayers (SAM). Experiments using model probes coated with -CH3 and -COOH terminated SAMs have been performed on the two aspirin crystal planes (001) and (100). Results indicate that the hydrophobic -CH3 terminated AFM probes had a greater degree of interaction with the crystal plane (001), whereas the -COOH terminated AFM probes had a larger interaction with the crystal plane (100). Interpretation of these data, based upon the chemistries of the probes, correlates with current understanding of the crystal surface chemistry derived from X-ray diffraction data and dissolution rate studies.