Intracranial Aneurysm Classifier Using Phenotypic Factors: An International Pooled Analysis.

Intracranial aneurysms (IAs) are usually asymptomatic with a low risk of rupture, but consequences of aneurysmal subarachnoid hemorrhage (aSAH) are severe. Identifying IAs at risk of rupture has important clinical and socio-economic consequences. The goal of this study was to assess the effect of patient and IA characteristics on the likelihood of IA being diagnosed incidentally versus ruptured. Patients were recruited at 21 international centers. Seven phenotypic patient characteristics and three IA characteristics were recorded. The analyzed cohort included 7992 patients. Multivariate analysis demonstrated that: (1) IA location is the strongest factor associated with IA rupture status at diagnosis; (2) Risk factor awareness (hypertension, smoking) increases the likelihood of being diagnosed with unruptured IA; (3) Patients with ruptured IAs in high-risk locations tend to be older, and their IAs are smaller; (4) Smokers with ruptured IAs tend to be younger, and their IAs are larger; (5) Female patients with ruptured IAs tend to be older, and their IAs are smaller; (6) IA size and age at rupture correlate. The assessment of associations regarding patient and IA characteristics with IA rupture allows us to refine IA disease models and provide data to develop risk instruments for clinicians to support personalized decision-making.

Wearable Technologies for Pediatric Patients with Surgical Infections-More than Counting Steps?

Reliable vital sign assessments are crucial for the management of patients with infectious diseases. Wearable devices enable easy and comfortable continuous monitoring across settings, especially in pediatric patients, but information about their performance in acutely unwell children is scarce. Vital signs were continuously measured with a multi-sensor wearable device (Everion®, Biofourmis, Zurich, Switzerland) in 21 pediatric patients during their hospitalization for appendicitis, osteomyelitis, or septic arthritis to describe acceptance and feasibility and to compare validity and reliability with conventional measurements. Using a wearable device was highly accepted and feasible for health-care workers, parents, and children. There were substantial data gaps in continuous monitoring up to 24 h. The wearable device measured heart rate and oxygen saturation reliably (mean difference, 2.5 bpm and 0.4% SpO2) but underestimated body temperature by 1.7 °C. Data availability was suboptimal during the study period, but a good relationship was determined between wearable device and conventional measurements for heart rate and oxygen saturation. Acceptance and feasibility were high in all study groups. We recommend that wearable devices designed for medical use in children be validated in the targeted population to assure future high-quality continuous vital sign assessments in an easy and non-burdening way.

Bayesian network analysis reveals the interplay of intracranial aneurysm rupture risk factors.

Clinical decision making regarding the treatment of unruptured intracranial aneurysms (IA) benefits from a better understanding of the interplay of IA rupture risk factors. Probabilistic graphical models can capture and graphically display potentially causal relationships in a mechanistic model. In this study, Bayesian networks (BN) were used to estimate IA rupture risk factors influences. From 1248 IA patient records, a retrospective, single-cohort, patient-level data set with 9 phenotypic rupture risk factors (n=790 complete entries) was extracted. Prior knowledge together with score-based structure learning algorithms estimated rupture risk factor interactions. Two approaches, discrete and mixed-data additive BN, were implemented and compared. The corresponding graphs were learned using non-parametric bootstrapping and Markov chain Monte Carlo, respectively. The BN models were compared to standard descriptive and regression analysis methods. Correlation and regression analyses showed significant associations between IA rupture status and patient's sex, familial history of IA, age at IA diagnosis, IA location, IA size and IA multiplicity. BN models confirmed the findings from standard analysis methods. More precisely, they directly associated IA rupture with familial history of IA, IA size and IA location in a discrete framework. Additive model formulation, enabling mixed-data, found that IA rupture was directly influenced by patient age at diagnosis besides additional mutual influences of the risk factors. This study establishes a data-driven methodology for mechanistic disease modelling of IA rupture and shows the potential to direct clinical decision-making in IA treatment, allowing personalised prediction.

Shape Trumps Size: Image-Based Morphological Analysis Reveals That the 3D Shape Discriminates Intracranial Aneurysm Disease Status Better Than Aneurysm Size.

Background: To date, it remains difficult for clinicians to reliably assess the disease status of intracranial aneurysms. As an aneurysm's 3D shape is strongly dependent on the underlying formation processes, it is believed that the presence of certain shape features mirrors the disease status of the aneurysm wall. Currently, clinicians associate irregular shape with wall instability. However, no consensus exists about which shape features reliably predict instability. In this study, we present a benchmark to identify shape features providing the highest predictive power for aneurysm rupture status. Methods: 3D models of aneurysms were extracted from medical imaging data (3D rotational angiographies) using a standardized protocol. For these aneurysm models, we calculated a set of metrics characterizing the 3D shape: Geometry indices (such as undulation, ellipticity and non-sphericity); writhe- and curvature-based metrics; as well as indices based on Zernike moments. Using statistical learning methods, we investigated the association between shape features and aneurysm disease status. This processing was applied to a clinical dataset of 750 aneurysms (261 ruptured, 474 unruptured) registered in the AneuX morphology database. We report here statistical performance metrics [including the area under curve (AUC)] for morphometric models to discriminate between ruptured and unruptured aneurysms. Results: The non-sphericity index NSI (AUC = 0.80), normalized Zernike energies Z N s u r f (AUC = 0.80) and the modified writhe-index W ¯ m e a n L 1 (AUC = 0.78) exhibited the strongest association with rupture status. The combination of predictors further improved the predictive performance (without location: AUC = 0.82, with location AUC = 0.87). The anatomical location was a good predictor for rupture status on its own (AUC = 0.78). Different protocols to isolate the aneurysm dome did not affect the prediction performance. We identified problems regarding generalizability if trained models are applied to datasets with different selection biases. Conclusions: Morphology provided a clear indication of the aneurysm disease status, with parameters measuring shape (especially irregularity) being better predictors than size. Quantitative measurement of shape, alone or in conjunction with information about aneurysm location, has the potential to improve the clinical assessment of intracranial aneurysms.

Effects of Low and High Aneurysmal Wall Shear Stress on Endothelial Cell Behavior: Differences and Similarities.

Background: Intracranial aneurysms (IAs) result from abnormal enlargement of the arterial lumen. IAs are mostly quiescent and asymptomatic, but their rupture leads to severe brain damage or death. As the evolution of IAs is hard to predict and intricates medical decision, it is essential to improve our understanding of their pathophysiology. Wall shear stress (WSS) is proposed to influence IA growth and rupture. In this study, we investigated the effects of low and supra-high aneurysmal WSS on endothelial cells (ECs). Methods: Porcine arterial ECs were exposed for 48 h to defined levels of shear stress (2, 30, or 80 dyne/cm2) using an Ibidi flow apparatus. Immunostaining for CD31 or γ-cytoplasmic actin was performed to outline cell borders or to determine cell architecture. Geometry measurements (cell orientation, area, circularity and aspect ratio) were performed on confocal microscopy images. mRNA was extracted for RNAseq analysis. Results: ECs exposed to low or supra-high aneurysmal WSS were more circular and had a lower aspect ratio than cells exposed to physiological flow. Furthermore, they lost the alignment in the direction of flow observed under physiological conditions. The effects of low WSS on differential gene expression were stronger than those of supra-high WSS. Gene set enrichment analysis highlighted that extracellular matrix proteins, cytoskeletal proteins and more particularly the actin protein family were among the protein classes the most affected by shear stress. Interestingly, most genes showed an opposite regulation under both types of aneurysmal WSS. Immunostainings for γ-cytoplasmic actin suggested a different organization of this cytoskeletal protein between ECs exposed to physiological and both types of aneurysmal WSS. Conclusion: Under both aneurysmal low and supra-high WSS the typical arterial EC morphology molds to a more spherical shape. Whereas low WSS down-regulates the expression of cytoskeletal-related proteins and up-regulates extracellular matrix proteins, supra-high WSS induces opposite changes in gene expression of these protein classes. The differential regulation in EC gene expression observed under various WSS translate into a different organization of the ECs' architecture. This adaptation of ECs to different aneurysmal WSS conditions may affect vascular remodeling in IAs.

Universities of Applied Sciences.

When the SARS-CoV-2 pandemic started,[1] science came to the immediate attention of the broad public. People and politicians were hanging on every word of medical doctors, virologists, molecular biologists, data scientists and many others in the hope of finding other protective measures than those used for centuries such as basic hygiene, distance, or quarantine. Here, at the Institute of Chemistry and Biotechnology at the Zurich University of Applied Sciences (ZHAW) we were also willing to provide scientific solutions to overcome the pandemic. Together with our partners from industry, we contributed to the development of a Swiss vaccine, are working on filters for active ventilated full protective suits and are developing tests to show the efficacy and safety of an active antiviral textile that allows controlled virus inactivation through an electrochemical reaction by applying a small current.

Genome-wide association study of intracranial aneurysms identifies 17 risk loci and genetic overlap with clinical risk factors.

Rupture of an intracranial aneurysm leads to subarachnoid hemorrhage, a severe type of stroke. To discover new risk loci and the genetic architecture of intracranial aneurysms, we performed a cross-ancestry, genome-wide association study in 10,754 cases and 306,882 controls of European and East Asian ancestry. We discovered 17 risk loci, 11 of which are new. We reveal a polygenic architecture and explain over half of the disease heritability. We show a high genetic correlation between ruptured and unruptured intracranial aneurysms. We also find a suggestive role for endothelial cells by using gene mapping and heritability enrichment. Drug-target enrichment shows pleiotropy between intracranial aneurysms and antiepileptic and sex hormone drugs, providing insights into intracranial aneurysm pathophysiology. Finally, genetic risks for smoking and high blood pressure, the two main clinical risk factors, play important roles in intracranial aneurysm risk, and drive most of the genetic correlation between intracranial aneurysms and other cerebrovascular traits.

Shape irregularity of the intracranial aneurysm lumen exhibits diagnostic value.

BACKGROUND: Morphological irregularity is linked to intracranial aneurysm wall instability and manifests in the lumen shape. Yet there is currently no consent on how to assess shape irregularity. The aims of this work are to quantify irregularity as perceived by clinicians, to break down irregularity into morphological attributes, and to relate these to clinically relevant factors such as rupture status, aneurysm location, and patient age or sex. METHODS: Thirteen clinicians and 26 laypersons assessed 134 aneurysm lumen segmentations in terms of overall perceived irregularity and five different morphological attributes (presence/absence of a rough surface, blebs, lobules, asymmetry, complex geometry of the parent vasculature). We examined rater agreement and compared the ratings with clinical factors by means of regression analysis or binary classification. RESULTS: Using rank-based aggregation, the irregularity ratings of clinicians and laypersons did not differ statistically. Perceived irregularity showed good agreement with curvature (coefficient of determination R2 = 0.68 ± 0.08) and was modeled very accurately using the five morphological rating attributes plus shape elongation (R2 = 0.95 ± 0.02). In agreement with previous studies, irregularity was associated with aneurysm rupture status (AUC = 0.81 ± 0.08); adding aneurysm location as an explanatory variable increased the AUC to 0.87 ± 0.09. Besides irregularity, perceived asymmetry, presence of blebs or lobules, aneurysm size, non-sphericity, and curvature were linked to rupture. No association was found between morphology and any of patient sex, age, and history of smoking or hypertension. Aneurysm size was linked to morphology. CONCLUSIONS: Irregular lumen shape carries significant information on the aneurysm's disease status. Irregularity constitutes a continuous parameter that shows a strong association with the rupture status. To improve the objectivity of morphological assessment, we suggest examining shape through six different morphological attributes, which can characterize irregularity accurately.

Production and secretion dynamics of prokaryotic Penicillin G acylase in Pichia pastoris.

To take full advantage of recombinant Pichia pastoris (Komagataella phaffii) as a production system for heterologous proteins, the complex protein secretory process should be understood and optimised by circumventing bottlenecks. Typically, little or no attention has been paid to the fate of newly synthesised protein inside the cell, or its passage through the secretory pathway, and only the secreted product is measured. However, the system's productivity (i.e. specific production rate qp), includes productivity of secreted (qp,extra) plus intracellularly accumulated (qp,intra) protein. In bioreactor cultivations with P. pastoris producing penicillin G acylase, we studied the dynamics of product formation, i.e. both the specific product secretion (qp,extra) and product retention (qp,intra) as functions of time, as well as the kinetics, i.e. productivity in relation to specific growth rate (µ). Within the time course, we distinguished (I) an initial phase with constant productivities, where the majority of product accumulated inside the cells, and qp,extra, which depended on µ in a bell-shaped manner; (II) a transition phase, in which intracellular product accumulation reached a maximum and productivities (intracellular, extracellular, overall) were changing; (III) a new phase with constant productivities, where secretion prevailed over intracellular accumulation, qp,extra was linearly related to µ and was up to three times higher than in initial phase (I), while qp,intra decreased 4-6-fold. We show that stress caused by heterologous protein production induces cellular imbalance leading to a secretory bottleneck that ultimately reaches equilibrium. This understanding may help to develop cultivation strategies for improving protein secretion from P. pastoris.Key Points• A novel concept for industrial bioprocess development.• A Relationship between biomass growth and product formation in P. pastoris.• A Three (3) phases of protein production/secretion controlled by the AOX1-promoter.• A Proof of concept in production of industrially relevant penicillin G acylase.

Incorporating variability of patient inflow conditions into statistical models for aneurysm rupture assessment.

BACKGROUND: Hemodynamic patterns have been associated with cerebral aneurysm instability. For patient-specific computational fluid dynamics (CFD) simulations, the inflow rates of a patient are typically not known. The aim of this study was to analyze the influence of inter- and intra-patient variations of cerebral blood flow on the computed hemodynamics through CFD simulations and to incorporate these variations into statistical models for aneurysm rupture prediction. METHODS: Image data of 1820 aneurysms were used for patient-specific steady CFD simulations with nine different inflow rates per case, capturing inter- and intra-patient flow variations. Based on the computed flow fields, 17 hemodynamic parameters were calculated and compared for the different flow conditions. Next, statistical models for aneurysm rupture were trained in 1571 of the aneurysms including hemodynamic parameters capturing the flow variations either by defining hemodynamic "response variables" (model A) or repeatedly randomly selecting flow conditions by patients (model B) as well as morphological and patient-specific variables. Both models were evaluated in the remaining 249 cases. RESULTS: All hemodynamic parameters were significantly different for the varying flow conditions (p < 0.001). Both the flow-independent "response" model A and the flow-dependent model B performed well with areas under the receiver operating characteristic curve of 0.8182 and 0.8174 ± 0.0045, respectively. CONCLUSIONS: The influence of inter- and intra-patient flow variations on computed hemodynamics can be taken into account in multivariate aneurysm rupture prediction models achieving a good predictive performance. Such models can be applied to CFD data independent of the specific inflow boundary conditions.

Comparison of statistical learning approaches for cerebral aneurysm rupture assessment.

PURPOSE: Incidental aneurysms pose a challenge to physicians who need to decide whether or not to treat them. A statistical model could potentially support such treatment decisions. The aim of this study was to compare a previously developed aneurysm rupture logistic regression probability model (LRM) to other machine learning (ML) classifiers for discrimination of aneurysm rupture status. METHODS: Hemodynamic, morphological, and patient-related information of 1631 cerebral aneurysms characterized by computational fluid dynamics simulations were used to train support vector machines (SVMs) with linear and RBF kernel (RBF-SVM), k-nearest neighbors (kNN), decision tree, random forest, and multilayer perceptron (MLP) neural network classifiers for predicting the aneurysm rupture status. The classifiers' accuracy, sensitivity, specificity, and area under the receiver operating characteristic curve (AUC) were evaluated and compared to the LRM using 249 test cases obtained from two external cohorts. Additionally, important variables were determined based on the random forest and weights of the linear SVM. RESULTS: The AUCs of the MLP, LRM, linear SVM, RBF-SVM, kNN, decision tree, and random forest were 0.83, 0.82, 0.80, 0.81, 0.76, 0.70, and 0.79, respectively. The accuracy ranged between 0.76 (decision tree,) and 0.79 (linear SVM, RBF-SVM, and MLP). Important variables for predicting the aneurysm rupture status included aneurysm location, the mean surface curvature, and maximum flow velocity. CONCLUSION: The performance of the LRM was overall comparable to that of the other ML classifiers, confirming its potential for aneurysm rupture assessment. To further improve the predictions, additional information, e.g., related to the aneurysm wall, might be needed.

Extending statistical learning for aneurysm rupture assessment to Finnish and Japanese populations using morphology, hemodynamics, and patient characteristics.

OBJECTIVE: Incidental aneurysms pose a challenge for physicians, who need to weigh the rupture risk against the risks associated with treatment and its complications. A statistical model could potentially support such treatment decisions. A recently developed aneurysm rupture probability model performed well in the US data used for model training and in data from two European cohorts for external validation. Because Japanese and Finnish patients are known to have a higher aneurysm rupture risk, the authors' goals in the present study were to evaluate this model using data from Japanese and Finnish patients and to compare it with new models trained with Finnish and Japanese data. METHODS: Patient and image data on 2129 aneurysms in 1472 patients were used. Of these aneurysm cases, 1631 had been collected mainly from US hospitals, 249 from European (other than Finnish) hospitals, 147 from Japanese hospitals, and 102 from Finnish hospitals. Computational fluid dynamics simulations and shape analyses were conducted to quantitatively characterize each aneurysm's shape and hemodynamics. Next, the previously developed model's discrimination was evaluated using the Finnish and Japanese data in terms of the area under the receiver operating characteristic curve (AUC). Models with and without interaction terms between patient population and aneurysm characteristics were trained and evaluated including data from all four cohorts obtained by repeatedly randomly splitting the data into training and test data. RESULTS: The US model's AUC was reduced to 0.70 and 0.72, respectively, in the Finnish and Japanese data compared to 0.82 and 0.86 in the European and US data. When training the model with Japanese and Finnish data, the average AUC increased only slightly for the Finnish sample (to 0.76 ± 0.16) and Finnish and Japanese cases combined (from 0.74 to 0.75 ± 0.14) and decreased for the Japanese data (to 0.66 ± 0.33). In models including interaction terms, the AUC in the Finnish and Japanese data combined increased significantly to 0.83 ± 0.10. CONCLUSIONS: Developing an aneurysm rupture prediction model that applies to Japanese and Finnish aneurysms requires including data from these two cohorts for model training, as well as interaction terms between patient population and the other variables in the model. When including this information, the performance of such a model with Japanese and Finnish data is close to its performance with US or European data. These results suggest that population-specific differences determine how hemodynamics and shape associate with rupture risk in intracranial aneurysms.

Plea for an international Aneurysm Data Bank: description and perspectives.

The disease resulting in the formation, growth, and rupture of intracranial aneurysms is complex. Research is accumulating evidence that the disease is driven by many different factors, some constant and others variable over time. Combinations of factors may induce specific biophysical reactions at different stages of the disease. A better understanding of the biophysical mechanisms responsible for the disease initiation and progression is essential to predict the natural history of the disease. More accurate predictions are mandatory to adequately balance risks between observation and intervention at the individual level as expected in the age of personalized medicine. Multidisciplinary exploration of the disease also opens an avenue to the discovery of possible preventive actions or medical treatments. Modern information technologies and data processing methods offer tools to address such complex challenges requiring 1) the collection of a high volume of information provided globally, 2) integration and harmonization of the information, and 3) management of data sharing with a broad spectrum of stakeholders.Over the last decade an infrastructure has been set up and is now made available to the academic community to support and promote exploration of intracranial disease, modeling, and clinical management simulation and monitoring.The background and purpose of the infrastructure is reviewed. The infrastructure data flow architecture is presented. The basic concepts of disease modeling that oriented the design of the core information model are explained. Disease phases, milestones, cases stratification group in each phase, key relevant factors, and outcomes are defined. Data processing and disease model visualization tools are presented. Most relevant contributions to the literature resulting from the exploitation of the infrastructure are reviewed, and future perspectives are discussed.

External validation of cerebral aneurysm rupture probability model with data from two patient cohorts.

BACKGROUND: For a treatment decision of unruptured cerebral aneurysms, physicians and patients need to weigh the risk of treatment against the risk of hemorrhagic stroke caused by aneurysm rupture. The aim of this study was to externally evaluate a recently developed statistical aneurysm rupture probability model, which could potentially support such treatment decisions. METHODS: Segmented image data and patient information obtained from two patient cohorts including 203 patients with 249 aneurysms were used for patient-specific computational fluid dynamics simulations and subsequent evaluation of the statistical model in terms of accuracy, discrimination, and goodness of fit. The model's performance was further compared to a similarity-based approach for rupture assessment by identifying aneurysms in the training cohort that were similar in terms of hemodynamics and shape compared to a given aneurysm from the external cohorts. RESULTS: When applied to the external data, the model achieved a good discrimination and goodness of fit (area under the receiver operating characteristic curve AUC = 0.82), which was only slightly reduced compared to the optimism-corrected AUC in the training population (AUC = 0.84). The accuracy metrics indicated a small decrease in accuracy compared to the training data (misclassification error of 0.24 vs. 0.21). The model's prediction accuracy was improved when combined with the similarity approach (misclassification error of 0.14). CONCLUSIONS: The model's performance measures indicated a good generalizability for data acquired at different clinical institutions. Combining the model-based and similarity-based approach could further improve the assessment and interpretation of new cases, demonstrating its potential use for clinical risk assessment.

PHASES Score for the Management of Intracranial Aneurysm: A Cross-Sectional Population-Based Retrospective Study.

BACKGROUND AND PURPOSE: The aim of this study is to assess whether the PHASES score allows to (1) match decisions taken by multidisciplinary team whether to observe or intervene, (2) classify patients being diagnosed with a ruptured versus unruptured intracranial aneurysm (UIA), and (3) discriminate patients at low risk of rupture from the population of patients diagnosed with intracranial aneurysm. METHODS: Population-based prospective and consecutive data were collected between 2006 and 2014. Patients (n=841) were stratified into 4 groups: stable UIA; growing observed UIA; immediately treated UIA; and aneurysmal subarachnoid hemorrhage (aSAH). All patients initially observed were pooled in a follow-up UIA group; patients from growing observed UIA, immediately treated UIA, and aSAH were pooled in a high risk of rupture group. Results are expressed as median [quartile 1, quartile 3]. RESULTS: PHASES scores of immediately treated UIA patients were significantly higher than follow-up UIA group (5 [3, 7] versus 2 [1, 4]). Patients diagnosed with UIA and PHASES score of >3 were more likely to be treated, and the score ≤3 was predictive for observation (areas under these curves=0.74). Odds of being diagnosed with an aSAH were associated with PHASES score of >3 (UIA, 4 [2, 6]; aSAH, 5 [4, 8]; areas under these curves=0.66). Scores of stable UIA patients were significantly lower than high risk of rupture group (2 [1, 4] versus 5 [4, 7]; stable UIA outcome prediction by PHASES score of ≤3: areas under these curves=0.76). CONCLUSIONS: There is a progression of PHASES score between stable UIA, growing observed UIA, immediately treated UIA, and aSAH groups. PHASES score of ≤3 is associated with a low but not negligible likelihood of aneurysm rupture, and specificity of the classifier is low.

Joint 3-D vessel segmentation and centerline extraction using oblique Hough forests with steerable filters.

CONTRIBUTIONS: We propose a novel framework for joint 3-D vessel segmentation and centerline extraction. The approach is based on multivariate Hough voting and oblique random forests (RFs) that we learn from noisy annotations. It relies on steerable filters for the efficient computation of local image features at different scales and orientations. EXPERIMENTS: We validate both the segmentation performance and the centerline accuracy of our approach both on synthetic vascular data and four 3-D imaging datasets of the rat visual cortex at 700 nm resolution. First, we evaluate the most important structural components of our approach: (1) Orthogonal subspace filtering in comparison to steerable filters that show, qualitatively, similarities to the eigenspace filters learned from local image patches. (2) Standard RF against oblique RF. Second, we compare the overall approach to different state-of-the-art methods for (1) vessel segmentation based on optimally oriented flux (OOF) and the eigenstructure of the Hessian, and (2) centerline extraction based on homotopic skeletonization and geodesic path tracing. RESULTS: Our experiments reveal the benefit of steerable over eigenspace filters as well as the advantage of oblique split directions over univariate orthogonal splits. We further show that the learning-based approach outperforms different state-of-the-art methods and proves highly accurate and robust with regard to both vessel segmentation and centerline extraction in spite of the high level of label noise in the training data.

TGIF: topological gap in-fill for vascular networks--a generative physiological modeling approach.

This paper describes a new approach for the reconstruction of complete 3-D arterial trees from partially incomplete image data. We utilize a physiologically motivated simulation framework to iteratively generate artificial, yet physiologically meaningful, vasculatures for the correction of vascular connectivity. The generative approach is guided by a simplified angiogenesis model, while at the same time topological and morphological evidence extracted from the image data is considered to form functionally adequate tree models. We evaluate the effectiveness of our method on four synthetic datasets using different metrics to assess topological and functional differences. Our experiments show that the proposed generative approach is superior to state-of-the-art approaches that only consider topology for vessel reconstruction and performs consistently well across different problem sizes and topologies.

Image-based mechanical analysis of stent deformation: concept and exemplary implementation for aortic valve stents.

An approach for extracting the radial force load on an implanted stent from medical images is proposed. To exemplify the approach, a system is presented which computes a radial force estimation from computer tomography images acquired from patients who underwent transcatheter aortic valve implantation (TAVI). The deformed shape of the implanted valve prosthesis' Nitinol frame is extracted from the images. A set of displacement vectors is computed that parameterizes the observed deformation. An iterative relaxation algorithm is employed to adapt the information extracted from the images to a finite-element model of the stent, and the radial components of the interaction forces between the stent and the tissue are extracted. For the evaluation of the method, tests were run using the clinical data from 21 patients. Stent modeling and extraction of the radial forces were successful in 18 cases. Synthetic test cases were generated, in addition, for assessing the sensitivity to the measurement errors. In a sensitivity analysis, the geometric error of the stent reconstruction was below 0.3 mm, which is below the image resolution. The distribution of the radial forces was qualitatively and quantitatively reasonable. An uncertainty remains in the quantitative evaluation of the radial forces due to the uncertainty in defining a radial direction on the deformed stent. With our approach, the mechanical situation of TAVI stents after the implantation can be studied in vivo, which may help to understand the mechanisms that lead to the complications and improve stent design.

Simulation of transcatheter aortic valve implantation under consideration of leaflet calcification.

Transcatheter aortic valve implantation (TAVI) is a minimally invasive off-pump procedure to replace diseased aortic heart valves. Known complications include paravalvular leaks, atrioventricular blocks, coronary obstruction and annular rupture. Careful procedure planning including appropriate stent selection and sizing are crucial. Few patient-specific geometric parameters, like annular diameters, annular perimeter and measurement of the distance to the coronary ostia, are currently used within this process. Biomechanical simulation allows the consideration of extracted anatomy and material parameters for the intervention, which may improve planning and execution phases. We present a simulation workflow using a fully segmented aortic root anatomy, which was extracted from pre-operative CT-scan data and apply individual material models and parameters to predict the procedure outcome. Our results indicate the high relevance of calcification location and size for intervention planning, which are not sufficiently considered at this time. Our analysis can further provide guidance for accurate, patient-specific device positioning and future adaptations to stent design.