The white rot basidiomycete Gelatoporia subvermispora produces fatty aldehydes that enable fungal manganese peroxidases to degrade recalcitrant lignin structures.

The ability of some white rot basidiomycetes to remove lignin selectively from wood indicates that low molecular weight oxidants have a role in ligninolysis. These oxidants are likely free radicals generated by fungal peroxidases from compounds in the biodegrading wood. Past work supports a role for manganese peroxidases (MnPs) in the production of ligninolytic oxidants from fungal membrane lipids. However, the fatty acid alkylperoxyl radicals initially formed during this process are not reactive enough to attack the major structures in lignin. Here, we evaluate the hypothesis that the peroxidation of fatty aldehydes might provide a source of more reactive acylperoxyl radicals. We found that Gelatoporia subvermispora produced trans-2-nonenal, trans-2-octenal, and n-hexanal (a likely metabolite of trans-2,4-decadienal) during the incipient decay of aspen wood. Fungal fatty aldehydes supported the in vitro oxidation by MnPs of a nonphenolic lignin model dimer, and also of the monomeric model veratryl alcohol. Experiments with the latter compound showed that the reactions were partially inhibited by oxalate, the chelator that white rot fungi employ to detach Mn3+ from the MnP active site, but nevertheless proceeded at its physiological concentration of 1 mM. The addition of catalase was inhibitory, which suggests that the standard MnP catalytic cycle is involved in the oxidation of aldehydes. MnP oxidized trans-2-nonenal quantitatively to trans-2-nonenoic acid with the consumption of one O2 equivalent. The data suggest that when Mn3+ remains associated with MnP, it can oxidize aldehydes to their acyl radicals, and the latter subsequently add O2 to become ligninolytic acylperoxyl radicals.IMPORTANCEThe biodegradation of lignin by white rot fungi is essential for the natural recycling of plant biomass and has useful applications in lignocellulose bioprocessing. Although fungal peroxidases have a key role in ligninolysis, past work indicates that biodegradation is initiated by smaller, as yet unidentified oxidants that can infiltrate the substrate. Here, we present evidence that the peroxidase-catalyzed oxidation of naturally occurring fungal aldehydes may provide a source of ligninolytic free radical oxidants.

Repurposing Inflatable Packaging Pillows as Bioreactors: a Convenient Synthesis of Glucosone by Whole-Cell Catalysis Under Oxygen.

Biocatalysis using molecular oxygen as the electron acceptor has significant potential for selective oxidations at low cost. However, oxygen is poorly soluble in water, and its slow rate of mass transfer in the aqueous phase is a major obstacle, even for laboratory-scale syntheses. Oxygen transfer can be accelerated by vigorous mechanical methods, but these are often incompatible with biological catalysts. Gentler conditions can be achieved with shallow, high surface area bag reactors that are designed for single use and generally for specialized cell culture applications. As a less-expensive alternative to these high-end bioreactors, we describe repurposing inflatable shipping pillows with resealable valves to provide high surface area mixing under oxygen for preparative synthesis of glucosone (D-arabino-hexos-2-ulose) from D-glucose using non-growing Escherichia coli whole cells containing recombinant pyranose 2-oxidase (POX) as catalyst. Parallel reactions permitted systematic study of the effects of headspace composition (i.e., air vs 100% oxygen), cell density, exogenous catalase, and reaction volume in the oxidation of 10% glucose. Importantly, only a single charge of 100% oxygen is required for stoichiometric conversion on a multi-gram scale in 18 h with resting cells, and the conversion was successfully repeated with recycled cells.

Comparison of Two Acid Hydrotropes for Sustainable Fractionation of Birch Wood.

This study reports on a comparative study of acid hydrotropic fractionation (AHF) of birch wood using maleic acid (MA) and p-toluenesulfonic acid (p-TsOH). Under the same level of delignification, lignin dissolved by MA is much less condensed with a higher content of ether aryl ß-O-4 linkages. Lignin depolymerization dominated in MA hydrotropic fractionation (MAHF) and resulted in a single lower molecular weight peak, in contrast to the competitive depolymerization and repolymerization in p-TsOH AHF with a bimodal distribution. The less condensed MA-dissolved lignin facilitated catalytic conversion to monophenols. Carboxylation of residual lignin in fractionated cellulosic water-insoluble solids (WISs) enhanced enzymatic saccharification by decreasing nonproductive cellulase binding to lignin. At a low cellulase loading of 10 FPU g-1 glucan, saccharification of WIS-MT120 from MAHF at 120 °C was 95 % compared with 48 % for WIS-PT85 from p-TsOH AHF at 85 °C under the same level of delignification of 63 %. Residual lignin carboxylation also facilitated nanofibrillation of WIS for producing lignin-containing cellulose nanofibrils (LCNFs) through an enhanced lignin lubrication effect, which substantially decreases fibrillation energy. LCNFs from only one pass of microfluidization of WIS-MT120 have the same morphology as those from WIS-PT85 after three passes. MA also has a lower solubility and higher minimal hydrotropic concentration, which facilitated acid recovery. MA is U.S. Food and Drug Administration (FDA)-approved as an indirect food additive, affording significant advantages compared with p-TsOH for biorefinery applications.

Dissolution of less-processed wood fibers without bleaching in an ionic liquid: Effect of lignin condensation on wood component dissolution.

This study evaluated the solubility of low-processed wood fibers produced from a low temperature acid hydrotropic fractionation (AHF) in an ionic liquid (IL) 1,5-diazabicyclo[4.3.0]non-5-enium acetate (DBNH[OAc]. Unbleached wood fibers produced from AHF using p-Toluenesulfonic acid (p-TsOH) with or without post-treatments with lignin and hemicelluloses content up to 15% and 25%, respectively, were dissolved directly into the IL DBNH[OAc]. Post-AHF treatments using dilute alkaline and glycerol swelled the cellulose and partially removed residual lignin resulting in improved dissolution. Semi-quantitative 2D HSQC NMR analyses revealed that the undissolved wood fiber residues were enriched with G units and condensed S units (Scond), demonstrating, as expected, that G units and condensed lignin substructures have a negative effect on dissolution in DBNH[OAc]. Therefore, AHF with rapid fractionation at low temperatures offers a promising advantage over existing high temperature pulp dissolving fiber (PDF) processes in terms of reducing energy input, lowering lignin content as well as reducing lignin condensation for producing man-made cellulosic fibers (MMCF).

Chemical modification of nanocellulose with canola oil fatty acid methyl ester.

Cellulose nanocrystals (CNCs), produced from dissolving wood pulp, were chemically functionalized by transesterification with canola oil fatty acid methyl ester (CME). CME performs as both the reaction reagent and solvent. Transesterified CNC (CNCFE) was characterized for their chemical structure, morphology, crystalline structure, thermal stability, and hydrophobicity. Analysis by Fourier transform infrared (FTIR) and FT-Raman spectroscopies showed that the long chain hydrocarbon structure was successfully grafted onto CNC surfaces. After transesterification the crystal size and crystallinity of nanocrystals were not changed as determined by Raman spectroscopy and wide angle X-ray diffraction (XRD). CNCFE showed higher thermal stability and smaller particle size than unmodified CNCs. Water contact angle measurement indicated the CNCFE surface has significantly higher hydrophobicity than unmodified CNCs. The transesterified CNCs could be potentially used as hydrophobic coatings and reinforcing agents to hydrophobic polymer for nanocomposites.

Synchrotron-based X-ray fluorescence microscopy in conjunction with nanoindentation to study molecular-scale interactions of phenol-formaldehyde in wood cell walls.

Understanding and controlling molecular-scale interactions between adhesives and wood polymers are critical to accelerate the development of improved adhesives for advanced wood-based materials. The submicrometer resolution of synchrotron-based X-ray fluorescence microscopy (XFM) was found capable of mapping and quantifying infiltration of Br-labeled phenol-formaldehyde (BrPF) into wood cell walls. Cell wall infiltration of five BrPF adhesives with different average molecular weights (MWs) was mapped. Nanoindentation on the same cell walls was performed to assess the effects of BrPF infiltration on cell wall hygromechanical properties. For the same amount of weight uptake, lower MW BrPF adhesives were found to be more effective at decreasing moisture-induced mechanical softening. This greater effectiveness of lower MW phenolic adhesives likely resulted from their ability to more intimately associate with water sorption sites in the wood polymers. Evidence also suggests that a BrPF interpenetrating polymer network (IPN) formed within the wood polymers, which might also decrease moisture sorption by mechanically restraining wood polymers during swelling.

Chlorination of lignin by ubiquitous fungi has a likely role in global organochlorine production.

Soils and decayed plant litter contain significant quantities of chlorinated aromatic polymers that have a natural but largely unknown origin. We used cupric oxide ligninolysis coupled with gas chromatography/mass spectrometry to show that Curvularia inaequalis, a widely distributed litter ascomycete, chlorinated the aromatic rings of lignin in wood that it was degrading. In aspen wood decayed for 24 weeks, two chlorolignin fragments, 5-chlorovanillin and 2-chlorosyringaldehyde, were each found at approximately 10 mug/g of wood (dry weight). These levels resemble those of similar structures generally found in unpolluted environmental samples. Fractionation of the extractable proteins followed by tandem mass spectrometric analysis showed that the colonized wood contained a previously described C. inaequalis chloroperoxidase that very likely catalyzed lignin chlorination. Chlorolignin produced by this route and humus derived from it are probably significant components of the global chlorine cycle because chloroperoxidase-producing fungi are ubiquitous in decaying lignocellulose and lignin is the earth's most abundant aromatic substance.