Comparison of the "Tall and Fall" Versus "Drop and Drive" Pitching Styles: Analysis of Major League Baseball Pitchers During a Single Season.

Background: Previous research has documented the proportion of "tall and fall" (TF) and "drop and drive" (DD) pitching styles among Major League Baseball (MLB) pitchers who underwent ulnar collateral ligament reconstruction (UCLR). The proportion of these 2 styles among all MLB pitchers remains unknown. Purpose: To determine the proportion of the TF and DD pitching styles in all rostered MLB pitchers during a single season as well as the proportion of TF and DD pitchers who sustained an upper extremity (UE) injury and those who underwent UCLR. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Pitcher demographic characteristics from the 2019 MLB season and pitching information were obtained via open-access sources. Two-dimensional video analysis was used to categorize the included pitchers into TF and DD groups. Statistical comparisons and contrasts were made using 2-tailed t tests, chi-square tests, and Pearson correlation analyses as appropriate. Results: Of the 660 MLB rostered pitchers in 2019 (age, 27.39 ± 3.51 years; body mass index, 26.34 ± 2.47 kg/m2; fastball velocity, 150.49 ± 3.99 kph [93.51 ± 2.48 mph]), 412 (62.4%) pitchers used the TF style and 248 (37.6%) pitchers used the DD style. Significantly more UE injuries were seen in the TF group compared with the DD group (112 vs 38 injuries, respectively; P < .001). Twelve pitchers underwent UCLR (TF, 10; DD, 2), representing a 1.8% UCLR rate among all pitchers. This was a second surgery for 2 pitchers, both of whom used the TF pitching style. Significantly more pitchers in the TF group than the DD group had undergone UCLR before 2019 (135 vs 56 pitchers, respectively; P = .005). Conclusion: The results of the present study demonstrated a higher prevalence of both UE injury and prior UCLR in TF pitchers. Further research is needed to explore the potential association between pitching style and UE injury.

Retrospective Analysis of Ulnar Collateral Ligament Reconstructions in Major League Baseball Pitchers: A Comparison of the "Tall and Fall" Versus "Drop and Drive" Pitching Styles.

Background: Previous pilot research has investigated differences in elbow valgus torque between the "tall and fall" (TF) and "drop and drive" (DD) pitching styles. Whether one of these pitching styles is associated with a greater rate of ulnar collateral ligament reconstruction (UCLR) is currently unknown. Purpose: To determine the proportion of Major League Baseball (MLB) pitchers using the TF and DD pitching styles who underwent UCLR over a 10-year period. Study Design: Cross-sectional study; Level of evidence, 3. Methods: The demographic characteristics of pitchers who underwent UCLR between 2007 and 2017 were obtained via the open-source database MLB Player Analysis Tommy John Surgery List. Other information, such as previous UCLR and pitching videos and graphics, was obtained from other open-source databases. A comprehensive, 2-dimensional, kinesiology-based multicomponent definition of each pitching style was formulated and used to categorize the included pitchers into the TF and DD groups. Statistical comparisons and contrasts were made using chi-square and Pearson correlation tests. Results: Included were 223 MLB pitchers (mean ± SD age, 27.5 ± 3.6 years; body mass index [BMI], 27.6 ± 2.2; throwing velocity, 92.9 ± 2.6 mph [149.5 ± 4.2 km/h]) who underwent UCLR between 2007 and 2017. Of these pitchers, 162 were categorized as TF pitchers (72.6%) and 61 as DD pitchers (27.4%). Pitching velocity for injured pitchers was significantly correlated to BMI (P < .001). We found no significant associations of pitching style with year of UCLR (P = .941), BMI (P = .549), age (P = .647), handedness (P = .501), or average pitch velocity (P = .921). Conclusion: The study findings demonstrated that a higher proportion of UCL-injured MLB pitchers (72.6%) used the TF pitching style. Further research is needed to explore the potential association between pitching style and UCL injury.

A NIST facility for resonant soft x-ray scattering measuring nano-scale soft matter structure at NSLS-II.

We present the design and performance of a polarized resonant soft x-ray scattering (RSoXS) station for soft matter characterization built by the national institute of standards and technology at the national synchrotron light source-II (NSLS-II). The RSoXS station is located within the spectroscopy soft and tender beamline suite at NSLS-II located in Brookhaven national laboratory, New York. Numerous elements of the RSoXS station were designed for optimal performance for measurements on soft matter systems, where it is of critical importance to minimize beam damage and maximize collection efficiency of polarized x-rays. These elements include a novel optical design, sample manipulator and sample environments, as well as detector setups. Finally, we will report the performance of the measurement station, including energy resolution, higher harmonic content and suppression methods, the extent and mitigation of the carbon absorption dip on optics, and the range of polarizations available from the elliptically polarized undulator source.

Electron and X-ray Focused Beam-Induced Cross-Linking in Liquids: Toward Rapid Continuous 3D Nanoprinting and Interfacing using Soft Materials.

Multiphoton polymer cross-linking evolves as the core process behind high-resolution additive microfabrication with soft materials for implantable/wearable electronics, tissue engineering, microrobotics, biosensing, drug delivery, etc. Electrons and soft X-rays, in principle, can offer even higher resolution and printing rates. However, these powerful lithographic tools are difficult to apply to vacuum incompatible liquid precursor solutions used in continuous additive fabrication. In this work, using biocompatible hydrogel as a model soft material, we demonstrate high-resolution in-liquid polymer cross-linking using scanning electron and X-ray microscopes. The approach augments the existing solid-state electron/X-ray lithography and beam-induced deposition techniques with a wider class of possible chemical reactions, precursors, and functionalities. We discuss the focused beam cross-linking mechanism, the factors affecting the ultimate feature size, and layer-by-layer printing possibilities. The potential of this technology is demonstrated on a few practically important applications such as in-liquid encapsulation of nanoparticles for plasmonic sensing and interfacing of viable cells with hydrogel electrodes.

Lymphatic Vessel on a Chip with Capability for Exposure to Cyclic Fluidic Flow.

The lymphatic system is a complex organ system that is essential in regulating the development of host immune responses. Because of the complexity of the lymphatic system and the existence of few in vitro models that replicate human lymphatic vessels, there is a need for a primary cell-based lymphatic model that can provide a better understanding of the effects of flow parameters, therapeutics, and other stimuli on lymphatic vessel behavior. In this report, a fluidic device models the cyclical lymphatic flow under normal and disease conditions. The device utilizes a pumpless design, operating with gravitational forces to simulate normal conditions with a shear of 0.092 Pa (0.92 dyn/cm2) as well as disease conditions with an increased shear of (0.67 Pa, 6.7 dyn/cm2). The cyclical pumping present in lymphatic vessels is replicated by applying shear stress for a period of 10 s multiple times per minute. Primary human lymphatic endothelial cells (HLECs) cultured in the device for 10 days produce less interleukin 8 (IL-8), and tumor necrosis factor alpha (TNF-α) per cell than cells cultured under static conditions. The results are consistent with previously published in vivo measurements, indicating that the fluidic device mimics conditions for IL-8 and TNF-α expression well. Data obtained with the devices also indicate that primary HLECs proliferate faster under high-shear than under low-shear conditions.

Revisiting the Photon-Drag Effect in Metal Films.

The photon-drag effect, the rectified current in a medium induced by conservation of momentum of absorbed or redirected light, is a unique probe of the detailed mechanisms underlying radiation pressure. We revisit this effect in gold, a canonical Drude metal. We discover that the signal for p-polarized illumination in ambient air is affected in both sign and magnitude by adsorbed molecules, opening previous measurements for reinterpretation. Further, we show that the intrinsic sign of the photon-drag effect is contrary to the prevailing intuitive model of direct momentum transfer to free electrons.

Pumpless microfluidic devices for generating healthy and diseased endothelia.

We have developed a pumpless cell culture chip that can recirculate small amounts of cell culture medium (400 µL) in a unidirectional flow pattern. When operated with the accompanying custom rotating platform, the device produces an average wall shear stress of up to 0.588 Pa ± 0.006 Pa without the use of a pump. It can be used to culture cells that are sensitive to the direction of flow-induced mechanical shear such as human umbilical vein endothelial cells (HUVECs) in a format that allows for large-scale parallel screening of drugs. Using the device we demonstrate that HUVECs produce pro-inflammatory indicators (interleukin 6, interleukin 8) under both unidirectional and bidirectional flow conditions, but that the secretion was significantly lower under unidirectional flow. Our results show that pumpless devices can simulate the endothelium under healthy and activated conditions. The developed devices can be integrated with pumpless tissues-on-chips, allowing for the addition of barrier tissues such as endothelial linings.

Nondegenerate Parametric Resonance in Large Ensembles of Coupled Micromechanical Cantilevers with Varying Natural Frequencies.

We investigate the collective dynamics and nondegenerate parametric resonance (NPR) of coplanar, interdigitated arrays of microcantilevers distinguished by their cantilevers having linearly expanding lengths and thus varying natural frequencies. Within a certain excitation frequency range, the resonators begin oscillating via NPR across the entire array consisting of 200 single-crystal silicon cantilevers. Tunable coupling generated from fringing electrostatic fields provides a mechanism to vary the scope of the NPR. Our experimental results are supported by a reduced-order model that reproduces the leading features of our data including the NPR band. The potential for tailoring the coupled response of suspended mechanical structures using NPR presents new possibilities in mass, force, and energy sensing applications, energy harvesting devices, and optomechanical systems.

Nanophotonic Atomic Force Microscope Transducers Enable Chemical Composition and Thermal Conductivity Measurements at the Nanoscale.

The atomic force microscope (AFM) offers a rich observation window on the nanoscale, yet many dynamic phenomena are too fast and too weak for direct AFM detection. Integrated cavity-optomechanics is revolutionizing micromechanical sensing; however, it has not yet impacted AFM. Here, we make a groundbreaking advance by fabricating picogram-scale probes integrated with photonic resonators to realize functional AFM detection that achieve high temporal resolution (<10 ns) and picometer vertical displacement uncertainty simultaneously. The ability to capture fast events with high precision is leveraged to measure the thermal conductivity (η), for the first time, concurrently with chemical composition at the nanoscale in photothermal induced resonance experiments. The intrinsic η of metal-organic-framework individual microcrystals, not measurable by macroscale techniques, is obtained with a small measurement uncertainty (8%). The improved sensitivity (50×) increases the measurement throughput 2500-fold and enables chemical composition measurement of molecular monolayer-thin samples. Our paradigm-shifting photonic readout for small probes breaks the common trade-off between AFM measurement precision and ability to capture transient events, thus transforming the ability to observe nanoscale dynamics in materials.

High-Resolution Imaging and Spectroscopy at High Pressure: A Novel Liquid Cell for the Transmission Electron Microscope.

We demonstrate quantitative core-loss electron energy-loss spectroscopy of iron oxide nanoparticles and imaging resolution of Ag nanoparticles in liquid down to 0.24 nm, in both transmission and scanning transmission modes, in a novel, monolithic liquid cell developed for the transmission electron microscope (TEM). At typical SiN membrane thicknesses of 50 nm the liquid-layer thickness has a maximum change of only 30 nm for the entire TEM viewing area of 200×200 µm.

Metal-dielectric-metal resonators with deep subwavelength dielectric layers increase the near-field SEIRA enhancement.

Plasmonic nanostructures presenting either structural asymmetry or metal-dielectric-metal (M-D-M) architecture are commonly used structures to increase the quality factor and the near-field confinement in plasmonic materials. This characteristic can be leveraged for example to increase the sensitivity of IR spectroscopy, via the surface enhanced IR absorption (SEIRA) effect. In this work, we combine structural asymmetry with the M-D-M architecture to realize Ag-Ag(2)O-Ag asymmetric ring resonators where two Ag layers sandwich a native silver oxide (Ag(2)O) layer. Their IR response is compared with the one of fully metallic (Ag) resonators of the same size and shape. The photothermal induced resonance technique (PTIR) is used to obtain near-field SEIRA absorption maps and spectra with nanoscale resolution. Although the native Ag(2)O layer is only 1 nm to 2 nm thick, it increases the quality factor of the resonators' dark-mode by ≈27% and the SEIRA enhancement by ≈44% with respect to entirely Ag structures.

Absorption spectroscopy and imaging from the visible through mid-infrared with 20 nm resolution.

Absorption spectroscopy and mapping from visible through mid-IR wavelengths has been achieved with spatial resolution exceeding the limit imposed by diffraction via the photothermal induced resonance technique. Correlated vibrational (chemical), and electronic properties are obtained simultaneously with topography with a wavelength-independent resolution of ≈20 nm using a single laboratory-scale instrument. This marks the highest resolution reported for PTIR, as determined by comparing height and PTIR images, and its first extension to near-IR and visible wavelengths.

Near-field asymmetries in plasmonic resonators.

Surface-enhanced infrared absorption (SEIRA) spectroscopy exploits the locally enhanced field surrounding plasmonic metamaterials to increase the sensitivity of infrared spectroscopy. The light polarization and incidence angle are important factors for exciting plasmonic nanostructures; however, such angle dependence is often ignored in SEIRA experiments, typically carried out with Cassegrain objectives. Here, the photothermal induced resonance technique and numerical simulations are used to map the distribution and intensity of SEIRA hot-spots surrounding gold asymmetric split ring resonators (ASRRs) as a function of light polarization and incidence angle. The results show asymmetric near-field SEIRA enhancements as a function of the incident illumination direction which, in analogy with the symmetry-breaking occurring in asymmetric transmission, we refer to as symmetry-breaking absorption. Numerical calculations reveal that the symmetry-breaking absorption in ASRRs originates in the angle-dependent interference between the electric and magnetic excitation channels of the resonators' dark-mode. Consequently, to maximize the SEIRA intensity, ASRRs should be illuminated from the dielectric side at an angle that maximizes the constructive interference of the two excitation channels, (35° for the structures studied here), in place of the Cassegrain objectives. These results can be generalized to all structures characterized by plasmonic excitations that give rise to a surface-normal magnetic moment and that possess an electric dipole.

Assessing chemical heterogeneity at the nanoscale in mixed-ligand metal-organic frameworks with the PTIR technique.

Recently, the use of mixtures of organic-building-block linkers has given chemists an additional degree of freedom for engineering metal-organic frameworks (MOFs) with specific properties; however, the poor characterization of the chemical complexity of such MixMOF structures by conventional techniques hinders the verification of rational design. Herein, we describe the application of a technique known as photothermal induced resonance to individual MixMOF microcrystals to elucidate their chemical composition with nanoscale resolution. Results show that MixMOFs isoreticular to In-MIL-68, obtained either directly from solution or by postsynthetic linker exchange, are homogeneous down to approximately 100 nm. Additionally, we report a novel in situ process that enables the engineering of anisotropic domains in MOF crystals with submicron linker-concentration gradients.

Nanoscale imaging of plasmonic hot spots and dark modes with the photothermal-induced resonance technique.

The collective oscillation of conduction electrons, responsible for the localized surface plasmon resonances, enables engineering nanomaterials by tuning their optical response from the visible to terahertz as a function of nanostructure size, shape, and environment. While theoretical calculations helped tremendously in understanding plasmonic nanomaterials and optimizing their light matter interaction, only a few experimental techniques are available to study these materials with high spatial resolution. In this work, the photothermal-induced resonance (PTIR) technique is applied for the first time to image the dark plasmonic resonance of gold asymmetric split ring resonators (A-SRRs) in the mid-infrared (IR) spectral region with nanoscale resolution. Additionally, the chemically specific PTIR signal is used to map the local absorption enhancement of poly(methyl methacrylate) coated on A-SRRs, revealing hot spots with local enhancement factors up to ≈30 at 100 nm lateral resolution. We argue that PTIR nanoscale characterization will facilitate the engineering and application of plasmonic nanomaterials for mid-IR applications.

Chemical imaging beyond the diffraction limit: experimental validation of the PTIR technique.

Photothermal induced resonance (PTIR) has recently attracted great interest for enabling chemical identification and imaging with nanoscale resolution. In this work, electron beam nanopatterned polymer samples are fabricated directly on 3D zinc selenide prisms and used to experimentally evaluate the PTIR lateral resolution, sensitivity and linearity. It is shown that PTIR lateral resolution for chemical imaging is comparable to the lateral resolution obtained in the atomic force microscopy height images, up to the smallest feature measured (100 nm). Spectra and chemical maps are produced from the thinnest sample analyzed (40 nm). More importantly, experiments show for the first time that the PTIR signal increases linearly with thickness for samples up to ≈ 1 µm (linearity limit); a necessary requirement towards the use of the PTIR technique for quantitative chemical analysis at the nanoscale. Finally, the analysis of thicker samples provides the first evidence that the previously developed PTIR signal generation theory is correct. It is believed that the findings of this work will foster nanotechnology development in disparate applications by proving the basis for quantitative chemical analysis with nanoscale resolution.

Val66Met in brain-derived neurotrophic factor affects stimulus-induced plasticity in the human pharyngeal motor cortex.

BACKGROUND & AIMS: Polymorphisms in brain-derived neurotrophic factor (BDNF) can affect brain and behavioral responses. However, little is known about the effects of a single nucleotide polymorphism (SNP) in BDNF, at codon 66 (the Val-Met substitution, detected in approximately 33% of the Caucasian population) on stimulation-induced plasticity in the cortico-bulbar system. We examined whether this SNP influenced outcomes of different forms of neurostimulation applied to the pharyngeal motor cortex. METHODS: Thirty-eight healthy volunteers were assessed for corticobulbar excitability after single-pulse, transcranial magnetic stimulation of induced pharyngeal electromyographic responses, recorded from a swallowed intraluminal catheter. Thereafter, volunteers were conditioned with pharyngeal electrical stimulation, or 2 forms of repetitive (1 and 5 Hz) transcranial magnetic stimulation (rTMS). Repeated measurements of pharyngeal motor-evoked potentials were assessed with transcranial magnetic stimulation for as long as 1 hour after the 3 forms of neurostimulation and correlated with SNPs at codon 66 of BDNF (encoding Val or Met). RESULTS: Pharyngeal electrical stimulation significantly increased the amplitude of motor-evoked potentials in individuals with the SNP that encoded Val66, compared to those that encoded Met66, with a strong GENOTYPE*TIME interaction (F8,112 = 2.4; P = .018). By contrast, there was a significant reduction in latencies of subjects with the SNP that encoded Met66 after 5-Hz rTMS (F3,60 = 4.9; P = .04). In addition, the expected inhibitory effect of 1-Hz rTMS on amplitude was not observed in subjects with the SNP that encoded Met66 in BDNF (F7,140 = 2.23; P = .035). CONCLUSIONS: An SNP in human BDNF at codon 66 affects plasticity of the pharyngeal cortex to different forms of neurostimulation. Genetic analysis might help select specific forms of neurostimulation as therapeutics for patients with disorders such as dysphagic stroke.

Development of backlighting sources for a Compton radiography diagnostic of inertial confinement fusion targets (invited).

We present scaled demonstrations of backlighter sources, emitting bremsstrahlung x rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the bremsstrahlung spectrum as a function of laser intensity and pulse length from solid targets irradiated at 2x10(17)-5x10(18) W/cm(2) using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 microm and conversion efficiencies of about 1x10(-13) J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

High-resolution imaging spectrometer for recording absolutely calibrated far ultraviolet spectra from laser-produced plasmas.

An imaging spectrometer was designed and fabricated for recording far ultraviolet spectra from laser-produced plasmas with wavelengths as short as 155 nm. The spectrometer implements a Cassegrain telescope and two gratings in a tandem Wadsworth optical configuration that provides diffraction limited resolution. Spectral images were recorded from plasmas produced by the irradiation of various target materials by intense KrF laser radiation with 248 nm wavelength. Two pairs of high-resolution gratings can be selected for the coverage of two wavebands, one grating pair with 1800 grooves/mm and covering approximately 155-175 nm and another grating pair with 1200 grooves/mm covering 230-260 nm. The latter waveband includes the 248 nm KrF laser wavelength, and the former waveband includes the wavelength of the two-plasmon decay instability at 23 the KrF laser wavelength (165 nm). The detection media consist of a complementary metal oxide semiconductor imager, photostimulable phosphor image plates, and a linear array of 1 mm(2) square silicon photodiodes with 0.4 ns rise time. The telescope mirrors, spectrometer gratings, and 1 mm(2) photodiode were calibrated using synchrotron radiation, and this enables the measurement of the absolute emission from the laser-produced plasmas with temporal, spatial, and spectral resolutions. The spectrometer is capable of measuring absolute spectral emissions at 165 nm wavelength as small as 5x10(-7) J/nm from a plasma source area of 0.37 mm(2) and with 0.4 ns time resolution.

Enhanced x-ray resolving power achieved behind the focal circles of Cauchois spectrometers.

Maintaining high resolving power is a primary challenge in hard x-ray spectroscopy of newly developed bright and transient x-ray sources such as laser-produced plasmas. To address this challenge, the line widths in x-ray spectra with energies in the 17 keV to 70 keV range were recorded by positioning the detectors on and behind the focal circles of Cauchois type transmission-crystal spectrometers. To analyze and understand the observed line widths, we developed a geometrical model that accounts for source broadening and various instrumental broadening mechanisms. The x-ray sources were laboratory Mo or W electron-bombarded anodes, and the spectra were recorded on photostimulable phosphor image plates. For these relatively small x-ray sources, it was found that when the detector was placed on or near the focal circle, the line widths were dominated by the effective spatial resolution of the detector. When the detector was positioned beyond the focal circle, the line widths were determined primarily by source-size broadening. Moreover, the separation between the spectral lines increased with distance behind the focal circle faster than the line widths, resulting in increased resolving power with distance. Contributions to line broadenings caused by the crystal thickness, crystal rocking curve width, geometrical aberrations, and natural widths of the x-ray transitions were in all cases smaller than detector and source broadening, but were significant for some spectrometer geometries. The various contributions to the line widths, calculated using simple analytical expressions, were in good agreement with the measured line widths for a variety of spectrometer and source conditions. These modeling and experimental results enable the design of hard x-ray spectrometers that are optimized for high resolving power and for the measurement of the x-ray source size from the line widths recorded behind the focal circle.