Transforming sustainable plant proteins into high performance lubricating microgels.

With the resource-intensive meat industry accounting for over 50% of food-linked emissions, plant protein consumption is an inevitable need of the hour. Despite its significance, the key barrier to adoption of plant proteins is their astringent off-sensation, typically associated with high friction and consequently poor lubrication performance. Herein, we demonstrate that by transforming plant proteins into physically cross-linked microgels, it is possible to improve their lubricity remarkably, dependent on their volume fractions, as evidenced by combining tribology using biomimetic tongue-like surface with atomic force microscopy, dynamic light scattering, rheology and adsorption measurements. Experimental findings which are fully supported by numerical modelling reveal that these non-lipidic microgels not only decrease boundary friction by an order of magnitude as compared to native protein but also replicate the lubrication performance of a 20:80 oil/water emulsion. These plant protein microgels offer a much-needed platform to design the next-generation of healthy, palatable and sustainable foods.

Entrapment of probiotic (Bifidobacterium longum) in bilayer emulsion film with enhanced barrier property for improving viability.

The gelatin/gellan gum based-bilayer emulsion film was developed in this work to improve the survivability of Bifidobacterium longum during the storage process. The baobab seed oil (BO) was added to the gelatin (GE) matrix to develop emulsion film as the barrier outer layer. The blueberry anthocyanin extract (BE) was incorporated into the gellan gum (GG)-based inner layer to enhance the viability of B. longum. The SEM and FTIR results revealed that the probiotics were successfully entrapped in BO/BE-loaded bilayer film. The greatest survivability and viable cell numbers of the B. longum during the storage period were observed in the BO/BE loaded bilayer film. Furthermore, the stability of the colorful patterns by electrochemical writing was also evaluated in this work. Finally, the GE/BO-GG/BE/BM maintain satisfactory probiotic viability in steamed bread coating application. Hence, the GE/BO-GG/BE/BM bilayer film could be considered a novel material to deliver and protect the probiotics in food applications.

Fabrication and characterization of polyvinyl alcohol/sodium alginate/zein/ chitosan bilayer film for dynamic visualization of pork quality.

The development of real-time and convenient meat freshness indication technology is crucial to ensure food safety. A novel antibacterial visualized intelligent film was designed based on polyvinyl alcohol (PA), sodium alginate (SA), zein (ZN), chitosan (CS), alizarin (AL) and vanillin (VA) using layer-by-layer assembly (LBL) method for real-time and in situ monitoring of pork freshness. The fabricated film had various advantageous properties, including an excellent hydrophobicity with a water contact angle (WCA) of 91.59°, improved color stability, excellent water barrier properties and increased mechanical performance (TS = 42.86 MPa). The fabricated film also demonstrated effective antibacterial properties with a bacteriostatic circle diameter of 13.6 mm for Escherichia coli. Moreover, the film can perceive and visualize the antibacterial effect through color changes, enabling dynamic visual monitoring of the antibacterial effect. A good correlation (R2 = 0.9188) between the color changes (ΔE) and total viable count (TVC) of pork was documented. Conclusively, fabricated multifunctional film improves the accuracy and versatility of freshness indication and had great potential for food preservation and freshness monitoring. The outcomes of this research provides a new perspective for the design and development of multifunctional intelligent films.

Effect of polymer architecture on the adsorption behaviour of amphiphilic copolymers: A theoretical study.

HYPOTHESIS: Polymer architecture is known to have significant impact on its adsorption behaviour. Most studies have been concerned with the more concentrated, "close to surface saturation" regime of the isotherm, where complications such as lateral interactions and crowding also additionally affect the adsorption. We compare a variety of amphiphilic polymer architectures by determining their Henry's adsorption constant (kH), which, as with other surface active molecules, is the proportionality constant between surface coverage and bulk polymer concentration in a sufficiently dilute regime. It is speculated that not only the number of arms or branches, but also the position of adsorbing hydrophobes influence the adsorption, and that by controlling the latter the two can counteract each other. METHODOLOGY: The Self-consistent field calculation of Scheutjens and Fleer was implemented to calculate the adsorbed amount of polymer for many different polymer architectures including linear, star and dendritic. Using the adsorption isotherms at very low bulk concentrations, we determined the value of kH for these. FINDINGS: It is found that the branched structures (star polymers and dendrimers) can be viewed as analogues of linear block polymers based on the location of their adsorbing units. Polymers containing consecutive trains of adsorbing hydrophobes in all cases showed higher level of adsorption compared to their counterparts, where the hydrophobes were more uniformly distributed on the chains. While increasing the number of branches (or arms for star polymers) also confirmed the known result that the adsorption decreased with the number of arms, this trend can be partially offset by the appropriate choice of the location of anchoring groups.

Fabrication of Pickering emulsions stabilized by citrus pectin modified with ß-cyclodextrin and its application in 3D printing.

Pickering emulsions stabilized by polysaccharide particles have received increasing attention because of their potential applications in three-dimensional (3D) printing. In this study, the citrus pectins (citrus tachibana, shaddock, lemon, orange) modified with ß-cyclodextrin (ß-CD) were used to stabilize Pickering emulsions reaching the requirements of 3D printing. In terms of pectin chemical structure, the steric hindrance provided by the RG I regions was more conducive to the stability of the complex particles. The modification of pectin by ß-CD provided the complexes a better double wettability (91.14 ± 0.14°-109.43 ± 0.22°) and a more negative ζ-potential, which was more beneficial for complexes to anchor at oil-water interface. In addition, the rheological properties, texture properties and stability of the emulsions were more responsive to the ratios of pectin/ß-CD (Rß/C). The results showed that the emulsions stabilized at a φ = 65 % and a Rß/C = 2:2 achieved the requirements (shear thinning behavior, self-supporting ability, and stability) of 3D printing. Furthermore, the application in 3D printing demonstrated that the emulsions under the optimal condition (φ = 65 % and Rß/C = 2:2) displayed excellent printing appearance, especially for the emulsions stabilized by ß-CD/LP particles. This study provides a basis for the selection of polysaccharide-based particles to prepare 3D printing inks which may be utilized in food manufacturing.

A cell-based electrochemical taste sensor for detection of Hydroxy-α-sanshool.

The Transient Receptor Potential Vanilloid 1 (TRPV1) has been identified as a suitable candidate for a spicy taste (Zanthoxylum plant) sensor. In this study, we investigated the response of TRPV1 expressed on human HepG2 cell membranes following stimulation with Hydroxy-α-sanshool. A three-dimensional (3D) cell-based electrochemical sensor was fabricated by layering cells expressing hTRPV1. l-cysteine/AuNFs electrodes were functionalized on indium tin oxide-coated glass (ITO) to enhance the sensor's selectivity and sensitivity. HepG2 cells were encapsulated in sodium alginate/gelatin hydrogel to create a 3D cell cultivation system, which was immobilized on the l-cysteine/AuNFs/ITO to serve as biorecognition elements. Using differential pulse voltammetry (DPV), the developed biosensor was utilized to detect Hydroxy-α-sanshool, a representative substance in Zanthoxylum bungeanum Maxim. The result obtained from DPV was linear with Hydroxy-α-sanshool concentrations ranging from 0 to 70 µmol/L, with a detection limit of 2.23 µmol/L. This biosensor provides a sensitive and novel macroscopic approach for TRPV1 detection.

Fabrication and characterization of colorimetric indicator for Salmon freshness monitoring using agar/polyvinyl alcohol gel and anthocyanin from different plant sources.

In order to investigate the sensitivity of anthocyanins from different plant origin as indicators for salmon freshness, nine plant anthocyanins were extracted and fabricated into colorimetric sensor arrays to detect NH3, trimethylamine (TMA), dimethylamine (DMA) to indicate salmon freshness. Rosella anthocyanin had the highest sensitivity for amines, ammonia and salmon. HPLC-MSS analysis indicated that Delphinidin-3 glucoside accounted for 75.48 % of the Rosella anthocyanin. UV-visible spectral analysis showed that the maximum absorbance band of Roselle anthocyanins for acid and alkaline forms were located at 525 nm and 625 nm which showed a relatively broader spectrum than other anthocyanins. An indicator film was fabricated by combining Roselle anthocyanin with agar and polyvinyl alcohol (PVA), which showed visible changes from red to green when employed to monitor the freshness of salmon stored at 4 °C. The ΔE value of Roselle anthocyanin indicator film was changed from 5.94 to >10. The ΔE value also can predict the chemical quality indicators of salmon effectively, especially with characteristic volatile components, and the predictive correlation coefficient was above 0.98. Therefore, the proposed indicating film showed great potential monitoring salmon freshness.

Novel gellan gum-based probiotic film with enhanced biological activity and probiotic viability: Application for fresh-cut apples and potatoes.

A novel probiotic film based on gellan gum (GN), cranberry extract (CE), and Lactococcus lactis (LA) was developed in the present study. The fluorescence and SEM image results showed that GN/CE film containing LA was successfully fabricated. The incorporation of LA significantly enhanced the antibacterial activity of the film. The presence of CE strengthened the antioxidant activity and LA survivability in the film. The combination of LA (0-1.0 %) and CE (0.5-1.0 %) improved the mechanical property of the film through the formation of density structure. The best comprehensive properties were obtained with the film containing 2.0 %LA and 0.5 %CE. The GN/2.0 %LA/0.5 %CE film also showed the optimal preservation effect on fresh-cut potatoes and apples. Hence, GN/2.0 %LA/0.5 %CE probiotic film has proved to be suitable for fruit and vegetable preservation.

Observational assessments of the relationship of dietary and pharmacological treatment on continuous measures of dysglycemia over 24 hours in women with gestational diabetes.

Objectives: Studies that use continuous glucose monitoring (CGM) to monitor women with gestational diabetes (GDM), highlight the importance of managing dysglycemia over a 24-hour period. However, the effect of current treatment methods on dysglycemia over 24-hrs are currently unknown. This study aimed to characterise CGM metrics over 24-hrs in women with GDM and the moderating effect of treatment strategy. Methods: Retrospective analysis of CGM data from 128 women with GDM in antenatal diabetes clinics. CGM was measured for 7-days between 30-32 weeks gestation. Non-parametric tests were used to evaluate differences of CGM between periods of day (morning, afternoon, evening, and overnight) and between treatment methods (i.e., diet alone or diet+metformin). Exploratory analysis in a subgroup of 34 of participants was performed to investigate the association between self-reported macronutrient intake and glycaemic control. Results: Glucose levels significantly differed during the day (i.e., morning to evening; P<0.001) and were significantly higher (i.e., mean blood glucose and area under the curve [AUC]) and more variable (i.e., SD and CV) than overnight glucose levels. Morning showed the highest amount of variability (CV; 8.4% vs 6.5%, P<0.001 and SD; 0.49 mmol/L vs 0.38 mmol/L, P<0.001). When comparing treatment methods, mean glucose (6.09 vs 5.65 mmol/L; P<0.001) and AUC (8760.8 vs 8115.1 mmol/L.hr; P<0.001) were significantly higher in diet+metformin compared to diet alone. Finally, the exploratory analysis revealed a favourable association between higher protein intake (+1SD or +92 kcal/day) and lower mean glucose (-0.91 mmol/L p, P=0.02) and total AUC (1209.6 mmol/L.h, P=0.021). Conclusions: Glycemia varies considerably across a day, with morning glycemia demonstrating greatest variability. Additionally, our work supports that individuals assigned to diet+metformin have greater difficulty managing glycemia and results suggest that increased dietary protein may assist with management of dysglycemia. Future work is needed to investigate the benefit of increased protein intake on management of dysglycemia.

Protocol for the INFORMED (Individualised Patient Care and Treatment for Maternal Diabetes) Study: a randomised controlled trial embedded within routine care.

INTRODUCTION: Diabetes in pregnancy presents a unique physiological challenge to manage glycaemia while maintaining adequate nourishment for the growing fetus. Women with diabetes who become pregnant are at greater risk of adverse maternal and newborn outcomes, compared with women without diabetes. Evidence suggests that control of (postprandial) glycaemia is key to manage maternal and offspring health but it is not yet clear (1) how diet and lifestyle moderate these shifts across the full duration of pregnancy or (2) what aspects of maternal and offspring health are associated with dysglycaemia. METHODS AND ANALYSIS: To investigate these gaps, a cross-over randomised clinical trial has been embedded within routine clinical care. Seventy-six pregnant women in their first trimester with type 1 or type 2 diabetes (with or without medication) attending their routine antenatal appointments at National Health Service (NHS) Leeds Teaching Hospitals will be recruited. Following informed consent, data on women's health, glycaemia, pregnancy and delivery will be shared by the NHS with researchers. At each visit in the first (10-12 weeks), second (18-20 weeks) and third (28-34 weeks) trimester, participants will be asked for consent to: (1) lifestyle and diet questionnaires, (2) blood for research purposes and (3) analysis of urine collected at clinical visits. Additionally, participants will be asked to consume two blinded meals in duplicate in second and third trimester. Glycaemia will be assessed by continuous glucose monitoring as part of routine care. The primary outcome is the effect of experimental meals (high vs low protein) on postprandial glycaemia. Secondary outcomes include (1) the association between dysglycaemia and maternal and newborn health, and (2) the association between maternal metabolic profiles in early pregnancy with dysglycaemia in later pregnancy. ETHICS AND DISSEMINATION: The Leeds East Research Ethics Committee and NHS (REC: 21/NE/0196) approved the study. Results will be published in peer-reviewed journals and disseminated to participants and the wider public. TRIAL REGISTRATION NUMBER: ISRCTN57579163.

Nutritional and Exercise-Focused Lifestyle Interventions and Glycemic Control in Women with Diabetes in Pregnancy: A Systematic Review and Meta-Analysis of Randomized Clinical Trials.

Diabetes disrupts one in six pregnancies, bestowing immediate and long-term health risks to mother and child. Diet and exercise are commonly prescribed to control dysglycemia, but their effectiveness across sub-populations and types of diabetes (type-1; type-2; or gestational diabetes mellitus, GDM) is uncertain. Therefore, a systematic review and meta-analysis on the effect of diet and/or exercise on glycemia in pregnant women with diabetes was conducted. Random effects models were used to evaluate effect sizes across studies and anticipated confounders (e.g., age, ethnicity, BMI). Of the 4845 records retrieved, 26 studies (8 nutritional supplements, 12 dietary, and 6 exercise interventions) were included. All studies were conducted in patients with GDM. Overall, supplement- and exercise-based interventions reduced fasting glucose (−0.30 mmol/L; 95% CI = −0.55, −0.06; p = 0.02; and 0.10 mmol/L; 95% CI = −0.20, −0.01; p = 0.04); and supplement- and diet-based interventions reduced HOMA-IR (−0.40; 95% CI = −0.58, −0.22; p < 0.001; and −1.15; 95% CI = −2.12, −0.17; p = 0.02). Subgroup analysis by confounders only confirmed marginal changed effect sizes. Our results suggest a favorable role of certain nutritional supplements, diet, and exercise practices on glycemia in women with GDM and underline a lack of evidence in ~20% of other diabetes-related pregnancies (i.e., women with pre-existing diabetes).

Saccharomyces cerevisiae-incorporated and sucrose-rich sodium alginate film: An effective antioxidant packaging film for longan preservation.

A sodium alginate (SA) film incorporated with Saccharomyces cerevisiae (SE) and sucrose (SU) was fabricated to control the quality and pericarp browning of longan. The SE with satisfactory glutathione production was selected as the antioxidant agent. The scanning electron microscopy (SEM) results revealed that the SU-rich SA film could be used as an effective carrier to protect the cell integrity of SE. The FTIR and mechanical property results indicated that the SA-SE film with the incorporation of SU has good flexibility due to the existence of hydrogen bonds. Notably, the cell viability of the SE was significantly improved with the addition of SU, which positively affects the antioxidant property of the film during the storage period. Finally, the SA-SE-3.0%SU films obviously improved the quality and pericarp browning of longan. The SA-based film incorporated with SU and SE may be established as a novel antioxidant fruit packaging material.

High- sensitivity bilayer nanofiber film based on polyvinyl alcohol/sodium alginate/polyvinylidene fluoride for pork spoilage visual monitoring and preservation.

A colorimetric bilayer film for pork freshness detection and preservation was developed using electrospinning technique. The bilayer film consisted of a layer with polyvinyl alcohol - sodium alginate - alizarin as sensor layer and a layer with polyvinylidene fluoride - vanillin as antibacterial layer. The water contact angle of bilayer film was larger than the single colorimetric layer. The color sensitivity to the ammonia of the bilayer film was higher, with an ΔE value of 47.99. The film could display color shifts from yellow to purple with the naked eye is critical for checking pork freshness. In addition, the bilayer film exhibited sensitive antibacterial activity, with an inhibition zone against S. aureus (8.3 mm) and E. coli (14.7 mm), respectively. Finally, the bilayer film was applied to freshness monitoring of pork. The film displayed significant color changes and prolonged the pork shelf life by 24 h at 25 °C.

Rapid Detection of Carbendazim Residue in Apple Using Surface-Enhanced Raman Scattering and Coupled Chemometric Algorithm.

In order to achieve rapid and precise quantification detection of carbendazim residues, surface-enhanced Raman spectroscopy (SERS) combined with variable selected regression methods were developed. A higher sensitivity and greater density of "hot spots" in three-dimensional (3D) SERS substrates based on silver nanoparticles compound polyacrylonitrile (Ag-NPs @PAN) nanohump arrays were fabricated to capture and amplify the SERS signal of carbendazim. Four Raman spectral variable selection regression models were established and comparatively assessed. The results showed that the bootstrapping soft shrinkage-partial least squares (BOSS-PLS) method achieved the best predictive capacity after variable selection, and the final BOSS-PLS model has the correlation coefficient (RP) of 0.992. Then, this method used to detect the carbendazim residue in apple samples; the recoveries were 86~116%, and relative standard deviation (RSD) is less than 10%. The 3D SERS substrates combined with the BOSS-PLS algorithm can deliver a simple and accurate method for trace detection of carbendazim residues in apples.

Effects of combined abiotic stresses on nutrient content of European wheat and implications for nutritional security under climate change.

Climate change is causing problems for agriculture, but the effect of combined abiotic stresses on crop nutritional quality is not clear. Here we studied the effect of 10 combinations of climatic conditions (temperature, CO2, O3 and drought) under controlled growth chamber conditions on the grain yield, protein, and mineral content of 3 wheat varieties. Results show that wheat plants under O3 exposure alone concentrated + 15 to + 31% more grain N, Fe, Mg, Mn P and Zn, reduced K by - 5%, and C did not change. Ozone in the presence of elevated CO2 and higher temperature enhanced the content of Fe, Mn, P and Zn by 2-18%. Water-limited chronic O3 exposure resulted in + 9 to + 46% higher concentrations of all the minerals, except K. The effect of climate abiotic factors could increase the ability of wheat to meet adult daily dietary requirements by + 6% to + 12% for protein, Zn and Fe, but decrease those of Mg, Mn and P by - 3% to - 6%, and K by - 62%. The role of wheat in future nutrition security is discussed.

Fast Burst-Sparsity Learning-Based Baseline Correction (FBSL-BC) Algorithm for Signals of Analytical Instruments.

Baseline correction is a critical step for eliminating the interference of baseline drift in spectroscopic analysis. The recently proposed sparse Bayesian learning (SBL)-based method can significantly improve the baseline correction performance. However, it has at least two disadvantages: (i) it works poorly for large-scale datasets and (ii) it completely ignores the burst-sparsity structure of the sparse representation of the pure spectrum. In this paper, we present a new fast burst-sparsity learning method for baseline correction to overcome these shortcomings. The first novelty of the proposed method is to jointly adopt a down-sampling strategy and construct a multiple measurements block-sparse recovery problem with the down-sampling sequences. The down-sampling strategy can significantly reduce the dimension of the spectrum; while jointly exploiting the block sparsity among the down-sampling sequences avoids losing the information contained in the original spectrum. The second novelty of the proposed method is introducing the pattern-coupled prior into the SBL framework to characterize the inherent burst-sparsity in the sparse representation of spectrum. As illustrated in the paper, burst-sparsity commonly occurs in peak zones with more denser nonzero coefficients. Properly utilizing such burst-sparsity can further enhance the baseline correction performance. Results on both simulated and real datasets (such as FT-IR, Raman spectrum, and chromatography) verify the substantial improvement, in terms of estimation accuracy and computational complexity.

Short-time acoustic and hydrodynamic cavitation improves dispersibility and functionality of pectin-rich biopolymers from citrus waste.

Pectin is a valuable biopolymer used as a natural, clean label additive for thickening and gelling. However, industry faces issues with dispersibility and stability of pectin formulations. To address these issues, the effect of short processing time (30-180 s) with hydrodynamic (HC) and acoustic cavitation (AC) on the dispersibility and gelling functionality of mandarin pectin-rich polysaccharide (M-PRP) was investigated. Short-time processing with HC and AC did not affect polymer composition. HC, but not AC, decreased polydispersity index (PDI) from 0.78 to 0.68 compared to the control. Electron and atomic force microscopy showed that HC and AC decreased aggregation of fibrous and matrix polymers. Both treatments increased apparent viscosity significantly from 0.059 Pa s to 0.30 Pa s at 10 -s. The pectin dispersions showed good gelling capacity upon addition of calcium (final conc. 35 mM). HC and AC treatments for 150 s led to gels that were 7 and 4 times stronger (as measured by peak force) than the control with more homogeneous, less porous structures. In conclusion, short-time HC and AC can improve the dispersibility and functionality of citrus pectin without affecting composition, and are promising technologies to facilitate the use of pectin in industry applications.

Pulse consumption improves indices of glycemic control in adults with and without type 2 diabetes: a systematic review and meta-analysis of acute and long-term randomized controlled trials.

PURPOSE: Findings from randomized controlled trials (RCTs) evaluating the effect of pulse intake on glycemic control are inconsistent and conclusive evidence is lacking. The aim of this study was to systematically review the impact of pulse consumption on post-prandial and long-term glycemic control in adults with and without type 2 diabetes (T2D). METHODS: Databases were searched for RCTs, reporting outcomes of post-prandial and long-term interventions with different pulse types on parameters of glycemic control in normoglycemic and T2D adults. Effect size (ES) was calculated using random effect model and meta-regression was conducted to assess the impact of various moderator variables such as pulse type, form, dose, and study duration on ES. RESULTS: From 3334 RCTs identified, 65 studies were eligible for inclusion involving 2102 individuals. In acute RCTs, pulse intake significantly reduced peak post-prandial glucose concentration in participants with T2D (ES - 2.90; 95%CI - 4.60, - 1.21; p ≤ 0.001; I2 = 93%) and without T2D (ES - 1.38; 95%CI - 1.78, - 0.99; p ≤ 0.001; I2 = 86%). Incorporating pulse consumption into long-term eating patterns significantly attenuated fasting glucose in normoglycemic adults (ES - 0.06; 95%CI - 0.12, 0.00; p ≤ 0.05; I2 = 30%). Whereas, in T2D participants, pulse intake significantly lowered fasting glucose (ES - 0.54; 95%CI - 0.83, - 0.24; p ≤ 0.001; I2 = 78%), glycated hemoglobin A1c (HbA1c) (ES - 0.17; 95%CI - 0.33, 0.00; p ≤ 0.05; I2 = 78) and homeostatic model assessment of insulin resistance (HOMA-IR) (ES - 0.47; 95%CI - 1.25, - 0.31; p ≤ 0.05; I2 = 79%). CONCLUSION: Pulse consumption significantly reduced acute post-prandial glucose concentration > 1 mmol/L in normoglycemic adults and > 2.5 mmol/L in those with T2D, and improved a range of long-term glycemic control parameters in adults with and without T2D. PROSPERO REGISTRY NUMBER: (CRD42019162322).

Inhibitory effect of polysaccharides on acrylamide formation in chemical and food model systems.

The inhibitory effect of three polysaccharides (alginate, pectin and chitosan) on acrylamide formation was investigated in chemical and fried potato food model systems, under two heating regimes (heating block and microwave). In the chemical system, acrylamide formation followed a second order reaction kinetic behaviour. Activation energies (Ea) were 17.85 and 110.78 kJ/mol for conventional and microwave heating respectively. Acrylamide content was highest at 180 °C after 60 min conventional heating (27.88 ng/ml) and 3.5 fold higher after microwave heating for 60 s (800 W, 98.02 ng/ml). Alginate (0.3% w/v) and pectin (0.2% w/v) solutions efficiently inhibited acrylamide formation by 65% and 56% respectively under conventional heating, and 36% and 30% respectively under microwave heating. Coating potatoes with alginate, pectin and chitosan (1% w/v) prior to frying dramatically inhibited acrylamide formation by 54%, 51% and 41% respectively. However only alginate and pectin slightly reduced acrylamide by 5% in the microwave.

Estimating the health burden of aflatoxin attributable stunting among children in low income countries of Africa.

Numerous population-based studies have documented high prevalence of aflatoxin associated childhood stunting in low income countries. We provide an estimate of the disease burden of aflatoxin related stunting using data from the four African countries. For this empirical analysis, we obtained blood aflatoxin albumin adduct biomarker based exposure data as measured using ELISA technique and anthropometric measurement data from surveys done over a 12-year period from 2001 to 2012 in four low income countries in Africa. We used these data to calculate population attributable risk (PAR), life time disease burden for children under five by comparing two groups of stunted children using both prevalence and incidence-based approaches. We combined prevalence estimates with a disability weight, measuring childhood stunting and co-occurrence of stunting-underweight to produce years lived with disability. Using a previously reported mortality, years of life lost were estimated. We used probabilistic analysis to model these associations to estimate the disability-adjusted life-years (DALYs), and compared these with those given by the Institute for Health Metrics and Evaluation's Global Burden of Disease (GBD) 2016 study. The PAR increased from 3 to 36% for aflatoxin-related stunting and 14-50% for co-occurrence of stunting and underweight. Using prevalence-based approach, children with aflatoxin related stunting resulted in 48,965.20 (95% uncertainty interval (UI): 45,868.75-52,207.53) DALYs per 100,000 individuals. Children with co-occurrence of stunting and underweight due to exposure to aflatoxin resulted in 40,703.41 (95% UI: 38,041.57-43,517.89) DALYs per 100,000 individuals. Uncertainty analysis revealed that reducing aflatoxin exposure in high exposure areas upto non-detectable levels could save the stunting DALYs up to 50%. The burden of childhood all causes stunting is greater in countries with higher aflatoxin exposure such as Benin. In high exposure areas, these results might help guide research protocols and prioritisation efforts and focus aflatoxin exposure reduction. HEFCE Global Challenge Research Fund Aflatoxin project.