Using digital photographs as a tool to assess the clinical color stability of lithium disilicate veneers: A clinical trial.

STATEMENT OF PROBLEM: Clinical information regarding the color stability of lithium disilicate veneers by using different methods of evaluation is scarce. PURPOSE: This clinical trial aimed to evaluate whether digital photographs are a reliable method of clinically assessing the color stability of lithium disilicate veneers. Standardized digital photographs (ELAB) were compared with the VITA Easyshade spectrophotometer (ES) at baseline and at a 6-month follow-up. MATERIAL AND METHODS: A split-mouth model was used in this randomized clinical trial to assess the performance of ceramic veneers (N=162), which were produced by either the CAD (IPS e.max CAD; n=81) or PRESS technique by heat pressing (IPS e.max PRESS; n=81), including the color dimension assessment. The ELAB evaluation was performed by making digital photographs with polarized light and a white balance (WhiBal) card. These data were transferred to the Adobe Lightroom CC2015 software program in RAW extension. The Digital Color Meter App (Apple) was used to measure L∗, a∗, and b∗ coordinates in this method. The ES color evaluation was performed with a spectrophotometer (Easy Shade) (control group) in the CIELab system. Measurements were performed 1 week after cementation (baseline) and at a 6-month follow-up. Data collected by the ELAB and ES methods were analyzed by a blinded calibrated operator to calculate ΔE by using the Mann-Whitney-Wilcoxon test (α=.05). RESULTS: For all periods, the comparison among ELAB and ES methods (P=.331), CAD×PRESS by ELAB (P=.658), and CAD×PRESS by ES (P=.833) showed no statistically significant differences. CONCLUSIONS: Standardized digital photographs (ELAB) were shown to be a straightforward and available resource for evaluating the color stability of lithium disilicate veneers, manufactured by CAD or PRESS.

Proanthocyanidin protects the enamel against initial erosive challenge when applied over acquired pellicle.

PURPOSE: Concurrently with the growing interest in CAD-CAM systems, several new materials of different chemical nature have become available. As an alternative to ceramics, numerous polymer-based materials have recently been proposed for permanent prosthetic restorations. Aim of this study was to test the CAD-CAM polymer-based materials available on the market, comparing mean flexural strength, Weibull characteristic strength and Weibull modulus. METHODS: Seven types of polymer-based blocks were tested: Lava Ultimate, 3M; Brilliant Crios, Coltene; Cerasmart, GC; Block HC, Shofu; Katana Avencia, Noritake; Grandio Blocs, Voco; Tetric CAD, and Ivoclar-Vivadent. Specimens were cut out from blocks, finished, polished, and tested in a three-point bending test apparatus until failure (n=30). Flexural strength, Weibull characteristic strength, and Weibull modulus were calculated. Flexural strength data were statistically analyzed. ANOVA on Ranks was applied, followed by the Dunn's test for post hoc comparisons (P= 0.05). RESULTS: Flexural strength values (MPa) were measured (mean±standard deviation). Different letters in parentheses label statistically significant differences: Grandio Blocs 266±24(a), Brilliant Crios 259±21(ab); Tetric CAD 254±15(ab); Katana Avencia 241±29(bc); Cerasmart 221±24(cd); Lava Ultimate 196±23(de); Block HC 139±10(e). All the tested materials had flexural strengths greater than 100 MPa, thereby satisfying the requirements of ISO standards for polymer-based materials. For all the tested materials the Weibull characteristic strength was greater than 100 MPa. Weibull modulus ranged between 21.20 (Tetric CAD) and 9.09 (Katana Avencia). CLINICAL SIGNIFICANCE: Even though all the CAD-CAM polymer-based materials marketed in blocks tested in the present study satisfy the requirements of ISO standard for polymer-based materials, their flexural resistance differs significantly. The data presented in the study may be helpful to clinicians for selecting the most appropriate materials for each clinical case.

Could applying gels containing chlorhexidine, epigallocatechin-3-gallate, or proanthocyanidin to control tooth wear progression improve bond strength to eroded dentin?

STATEMENT OF PROBLEM: A consensus on whether or how to treat eroded dentin to bond to composite resins is lacking. The role of gels containing chlorhexidine (CHX), epigallocatechin-3-gallate (EGCG), and proanthocyanidin (PAC) in controlling erosive wear progression needs to be evaluated for bonding. PURPOSE: The purpose of this in vitro study was to evaluate the effect of gels containing antiproteolytic agents (CHX or EGCG) or an antiproteolytic and also collagen crosslinking agent (PAC) to control tooth wear progression on the microtensile bond strength (µTBS) of an adhesive system plus a composite resin to simulated eroded dentin. MATERIAL AND METHODS: Superficial occlusal dentin surfaces obtained from sectioned third molars were ground with SiC paper (600-grit; 1 minute; N-normal dentin) or subsequently submitted to an initial erosive challenge (Coca-Cola; 5 minutes). They then received one of the following treatments: application of a placebo (P), a 0.12% CHX digluconate, an EGCG at 400 µM, or a 10% PAC gel (vehicle: hydroxyethylcellulose, propylene glycol, methylparaben, imidazolidinyl urea, and deionized water; active principle: as per the experimental groups when applicable) or no treatment (C: control). Initially demineralized dentin was also submitted to pH cycling (Coca-Cola; 5 minutes, 3×/day, 5 days) to simulate eroded dentin (E). After acid etching all the specimens, adhesive Adper Single Bond 2 was applied, and composite resin (Filtek Z350 XT) was placed. After 24 hours storage in distilled water at 37 °C, the specimens were sectioned into beams, and the µTBS was tested at 0.5 mm/minute. The µTBS values obtained were evaluated considering each tooth as an experimental unit, and 2-way ANOVA and the Tukey post hoc test for multiple comparisons were applied (α=.05). RESULTS: Immediate µTBS values for the eroded dentin were always lower than those for the normal dentin, irrespective of whether any of the gels were applied for wear control. CONCLUSIONS: CHX, EGCG, PAC, and placebo gels, applied after the initial demineralization and before the pH cycling to simulate the eroded dentin, had a similar effect on the µTBS of the adhesive system plus the composite resin to simulated eroded dentin when compared with nonapplication (control).

Analysis of Active Bacteria Persisting after Chemomechanical Procedures: An RNA- and DNA-based Molecular Study.

INTRODUCTION: Because active cells present higher abundance of ribosomal RNA (rRNA) than rDNA (rRNA genes), data obtained with rDNA-based quantitative polymerase chain reaction (qPCR) and rRNA-based qPCR (RT-qPCR) were correlated to search for active bacteria after chemomechanical procedures (CMP). In addition, the ability of both assays to detect bacteria in endodontic samples was evaluated. METHODS: Samples were taken from 40 teeth with primary endodontic infections before (S1) and after CMP (S2). DNA and cDNA (synthetized from RNA) were used as templates for qPCR using universal primers for bacteria and species-specific primers for Bacteroidaceae sp. HOT-272, Cutibacterium acnes, Selenomonas spp., and Enterococcus faecalis. RESULTS: After CMP, there was a drastic reduction in the number of total bacteria, Selenomonas spp., and E. faecalis, whereas no significant difference was observed for the levels of Bacteroidaceae sp. HOT-272 and C. acnes. The concentration of rRNA copies in S2 samples was significantly higher than the corresponding levels of rDNA for assays targeting total bacteria, Bacteroidaceae sp. HOT-272, and C. acnes (P < .05), indicating persistence of active bacteria. The rDNA-based qPCR presented low sensitivity and high specificity when compared with RT-qPCR. For most assays, samples positive for rDNA were also positive for rRNA (positive predictive value = 100%). CONCLUSIONS: CMP was effective in reducing levels but not the metabolic activity of total bacteria. Bacteroidaceae sp. HOT-272 and C. acnes were active members of the persistent community. Although less sensitive than RT-qPCR, most rDNA-based qPCR assays had a low risk of providing false-positive results in postinstrumentation samples.

Effects of Contemporary Irrigant Activation Schemes and Subsequent Placement of an Interim Dressing on Bacterial Presence and Activity in Root Canals Associated with Asymptomatic Apical Periodontitis.

New tools for activating endodontic irrigants have evolved, yet their impact on root canal disinfection, in comparison to the passive placing of an inter-visit medication, have not yet been fully elucidated. The use of DNA- and rRNA-based methods may cast some new light on this issue, as they allow a comparison to be made between microbial presence and activity. Therefore, the aim of this single-arm intervention trial is to evaluate the antibacterial effect of endodontic procedures using both molecular methods. Root canal samples were obtained from 20 patients with asymptomatic apical periodontitis after each treatment step: access cavity, chemo-mechanical preparation, adjunctive procedures (XP-endo Finisher file and passive ultrasonic irrigation), calcium hydroxide medication, and 2nd-visit root canal preparation. DNA and cDNA from the samples were subjected to quantitative polymerase chain reaction with universal primers for the bacterial 16S rRNA gene. Chemo-mechanical preparation promoted a drastic reduction in bacterial levels and activity, whereas the adjunctive procedures did not make a significant contribution to further disinfection. At the 2nd visit, bacteria were active after the use of calcium hydroxide medication; however, they were significantly reduced after a 2nd-visit preparation. Consequently, the lowest bacterial levels were found at the end of the treatment. This clinical trial, which used an rRNA and rDNA combined approach, confirmed previous studies showing that root canal preparation represents the main strategy for root canal disinfection.

Dental Plaque Disclosing as an Auxiliary Method for Professional Dental Prophylaxis in Early Childhood.

AIM: This study aimed to clarify whether dental plaque disclosing before professional prophylaxis would improve the visualization of dental plaque, therefore optimizing the procedure. MATERIALS AND METHODS: The sample comprised both the smooth and occlusal surfaces of the teeth of 25 children from 18 to 36 months. A randomized crossover clinical trial was conducted with two groups: GI-with disclosing and GII-without disclosing (washout/1 month). The teeth were stained with 1% malachite green solution to assess the amount of dental plaque on smooth and occlusal surfaces. RESULTS: Dental plaque removal was more effective and statistically faster (391.27 seconds ±142.2) in GI. The plaque index and the prophylaxis duration were inversely related in GI. The child's behavior did not affect the plaque removal effectiveness, regardless of plaque disclosure (p > 0.05). CONCLUSION: Dental plaque disclosing in young children is an effective and less time-consuming method that improves the quality of the professional dental prophylaxis. CLINICAL SIGNIFICANCE: Biofilm control is important for the success of programs for prevention of early childhood caries (ECC) and considering the particularities inherent to the dental care of infants, it is necessary that periodic professional prophylaxis is effective in eliminating the oral biofilm, ideally reducing chair time. Although dental plaque disclosing has been traditionally performed on educational basis during oral hygiene instruction, this resource can be safely employed to help professional prophylaxis in infants. HOW TO CITE THIS ARTICLE: de Alencar CRB, de Oliveira GC, et al. Dental Plaque Disclosing as an Auxiliary Method for Professional Dental Prophylaxis in Early Childhood. Int J Clin Pediatr Dent 2019;12(3):189-193.

Manual vs. rotary instrumentation in endodontic treatment of permanent teeth: A systematic review and meta-analysis.

PURPOSE: To systematically review all studies comparing manual instrumentation with at least one rotary instrument in the preparation of the root canal of permanent human teeth. METHODS: The electronic databases PubMed, EMBASE, LILACS, IBECS and BBO were searched. In vitro studies published until 27 of September, 2016 were included. For statistical analysis, we used the Comprehensive Meta-Analysis software (Biostat), considering P< 0.05 significant. RESULTS: A total of 1,104 articles published until September 27, 2016 were obtained, with 57 meeting the eligibility criteria. The studies were grouped according to the main methodology used (computerized tomography, periapical radiography, image amplification and scanning electron microscope). Due to the wide variability of the methodologies and evaluated parameters, a subgroup analysis was performed based on the evaluated parameter. The meta-analysis revealed that rotary instruments caused a significant reduction in instrumentation time and a smaller change of the canal curvature than manual instruments. The rotary instrumentation presented better results regarding root canal transportation, ability of centralization within the canal path and shaping of the canal. Manual instrumentation performed better with regard to the smear layer and debris production, more instrumented canal surfaces and fewer dentin defects. CLINICAL SIGNIFICANCE: An increasing number of studies have compared the efficiency of manual and rotary instrumentation in endodontic treatment of permanent teeth. This study helps elucidate which method is more efficient in the endodontic treatment of permanent teeth.

The Effect of Mucin in Artificial Saliva on Erosive Rehardening and Demineralization.

The effect of mucin in artificial saliva on rehardening (RE-experiment) and inhibition (DE-experiment) of erosion was evaluated. The treatment groups were: artificial saliva with mucin, artificial saliva without mucin, human saliva, and water. For the RE-experiment, after immersion of enamel blocks in citric acid (4 min), hardness was measured and blocks were subjected to treatment for 2 h. For the DE-experiment, sound blocks were subjected to treatment for 2 h and immersed in citric acid (4 min). Percentages of hardness recovery (RE) and loss (DE) were analyzed (ANOVA/Tukey's test). The salivas promoted similar rehardening, but only the saliva with mucin was similar to human saliva with regard to enamel protection against erosion.