Interdigitated Three-Dimensional Heterogeneous Nanocomposites for High-Performance Mechanochromic Smart Membranes.

Mechanochromic smart membranes capable of optical modulation have great potential in smart windows, artificial skins, and camouflage. However, the realization of high-contrast optical modulation based on light scattering activated at a low strain remains challenging. Here, we present a strategy for designing mechanochromic scattering membranes by introducing a Young's modulus mismatch between the two interdigitated polydimethylsiloxane phases with weak interfaces in a periodic three-dimensional (3D) structure. The refractive index-matched interfaces of the nanocomposite provide a high optical transparency of 93%. Experimental and computational studies reveal that the 3D heterogeneity facilitates the generation of numerous nanoscale debonds or "nanogaps" at the modulus-mismatching interfaces, enabling incident light scattering under tension. The heterogeneous scatterer delivers both a high transmittance contrast of >50% achieved at 15% strain and a maximum contrast of 82%. When used as a smart window, the membrane demonstrates effective diffusion of transmitting sunlight, leading to moderate indoor illumination by eliminating extremely bright or dark spots. At the other extreme, such a 3D heterogeneous design with strongly bonded interfaces can enhance the coloration sensitivity of mechanophore-dyed nanocomposites. This work presents insights into the design principles of advanced mechanochromic smart membranes.

Rationally Designed TiO2 Nanostructures of Continuous Pore Network for Fast-Responding and Highly Sensitive Acetone Sensor.

For the last several years, indoor air quality monitoring has been a significant issue due to the increasing time portion of indoor human activities. Especially, the early detection of volatile organic compounds potentially harmful to the human body by the prolonged exposure is the primary concern for public human health, and such technology is imperatively desired. In this study, highly porous and periodic 3D TiO2 nanostructures are designed and studied for this concern. Specifically, extremely high gas molecule accessibility throughout the whole nanostructures and precisely controlled internecks of 3D TiO2 nanostructures can achieve an unprecedented gas response of 299 to 50 ppm CH3 COCH3 with an extremely fast response time of less than 1s. The systematic approach to utilize the whole inner and outer surfaces of the gas sensing materials and periodically formed internecks to localize the current paths in this study can provide highly promising perspectives to advance the development of chemoresistive gas sensors using metal oxide nanostructures for the Internet of Everything application.

Enhanced impact-resistance of aeronautical quasi-isotropic composite plates through diffused water molecules in epoxy.

In order to elucidate the hygroscopic effects on impact-resistance of carbon fiber/epoxy quasi-isotropic composite plates, low-velocity impact tests are conducted on dry and hygroscopically conditioned plates, respectively, under identical configurations. For the impact tests, plates were immersed in the hot water at 80 °C to absorb a different amount of moisture content (MC). Experimental results reveal that the presence of the MC plays a pivotal role by improving the impact-resistance of composite plates. Plates with higher percentage of MC could behave elastically to a larger strain, yielding larger deflection under impact loading. From SEM fractographies, it is observed that small disbanding grows at the interface of epoxy and carbon fiber due to absorbed MC. After absorbing MC, most of impact energy is dissipated in hygroscopic conditioned composite plates through elastic deformation and overall less damage is induced in wet composite plates compare to the dry plate. We can postulate that the presence of MC increases the elastic limit as well as ductility of the epoxy by promoting chain segmental mobility of the polymer molecules, which eventually leads to the enhancement of the impact-resistance of wet quasi-isotropic composite plates in comparison with the dry plate.

Detection of Micro-Cracks in Metals Using Modulation of PZT-Induced Lamb Waves.

The ultrasonic modulation technique, developed by inspecting the nonlinearity from the interactions of crack surfaces, has been considered very effective in detecting fatigue cracks in the early stage of the crack development due to its high sensitivity. The wave modulation is the frequency shift of a wave passing through a crack and does not occur in intact specimens. Various parameters affect the modulation of the wave, but quantitative analysis for each variable has not been comprehensively conducted due to the complicated interaction of irregular crack surfaces. In this study, specimens with a constant crack width are manufactured, and the effects of various excitation parameters on modulated wave generation are analyzed. Based on the analysis, an effective crack detection algorithm is proposed and verified by applying the algorithm to fatigue cracks. For the quantitative analysis, tests are repeatedly conducted by varying parameters. As a result, the excitation intensity shows a strong linear relationship with the amount of modulated waves, and the increase of modulated wave is expected as crack length increases. However, the change in the dynamic characteristics of the specimen with the crack length is more dominant in the results. The excitation frequency is the most dominant variable to generate the modulated waves, but a direct correlation is not observed as it is difficult to measure the interaction of crack surfaces. A numerical analysis technique is developed to accurately simulate the movement and interaction of the crack surface. The crack detection algorithm, improved by using the observations from the quantitative analyses, can distinguish the occurrence of modulated waves from the ambient noises, and the state of the specimens is determined by using two nonlinear indexes.

Focused Electric-Field Polymer Writing: Toward Ultralarge, Multistimuli-Responsive Membranes.

The cost-effective direct writing of polymer nanofibers (NFs) has garnered considerable research attention as a compelling one-pot strategy for obtaining key building blocks of electrochemical and optical devices. Among the promising applications, the changes in optical response from external stimuli such as mechanical deformation and changes in the thermal environment are of great significance for emerging applications in smart windows, privacy protection, aesthetics, artificial skin, and camouflage. Herein, we propose a rational design for the mass production of customized NFs through the development of focused electric-field polymer writing (FEPW) coupled with the roll-to-roll technique. As a proof of key applications, we demonstrate multistimuli-responsive (mechano- and thermochromism) membranes with an exceptional production scale (over 300 cm2). Specifically, the membranes consist of periodically aligned ultrathin (∼60 nm) alumina nanotubes inserted in the elastomers. We performed a two-phase finite element analysis of the unit cells to verify the underlying physics of light scattering at heterogeneous interfaces of the strain-induced air gaps. By adding thermochromic dye during the FEPW, the optical modulation of transmittance change (∼83% to 37% at visible wavelength) was successfully extended to high-contrast thermal-dependent coloration.

High-Contrast Optical Modulation from Strain-Induced Nanogaps at 3D Heterogeneous Interfaces.

The realization of high-contrast modulation in optically transparent media is of great significance for emerging mechano-responsive smart windows. However, no study has provided fundamental strategies for maximizing light scattering during mechanical deformations. Here, a new type of 3D nanocomposite film consisting of an ultrathin (≈60 nm) Al2O3 nanoshell inserted between the elastomers in a periodic 3D nanonetwork is proposed. Regardless of the stretching direction, numerous light-scattering nanogaps (corresponding to the porosity of up to ≈37.4 vol%) form at the interfaces of Al2O3 and the elastomers under stretching. This results in the gradual modulation of transmission from ≈90% to 16% at visible wavelengths and does not degrade with repeated stretching/releasing over more than 10 000 cycles. The underlying physics is precisely predicted by finite element analysis of the unit cells. As a proof of concept, a mobile-app-enabled smart window device for Internet of Things applications is realized using the proposed 3D nanocomposite with successful expansion to the 3 × 3 in. scale.

Influence of Zinc Content on the Mechanical Behaviors of Cu-Zn Alloys by Molecular Dynamics.

The mechanical properties of copper alloys containing various ratios of zinc are evaluated using molecular dynamics (MD) simulations to determine the impact of the different zinc concentrations. The modified embedded atom method (MEAM) parameters for copper were established in the 1990s; however, the MEAM potential parameters for zinc, with an axial ratio >1, were recently proposed. In this research, the MD models of the copper alloys with various zinc contents are constructed using the MEAM potential parameters for zinc. Tensile test simulations are also conducted. The strain rate effects of the alloys are evaluated at four different strain rates, and the variations in the tensile strengths and Young's modulus are investigated. The proposed procedures have significant potential applicability for simulating a variety of zinc-containing alloys.

Experimental and Numerical Investigations of High-Speed Projectile Impacts on 7075-T651 Aluminum Plates.

Simulation of the material failure under high strain rate conditions is one of the most difficult problems in the finite element analyses, and many researchers have tried to understand and reproduce dynamic material fracture. In this study, we investigate a failure criterion that minimizes the mesh dependency at high strain rates and incorporates the criterion into the Johnson-Cook constitutive relationship by developing a user-defined material model. Impact tests were performed using a gas-gun system in order to investigate the response of the 7075-T651 aluminum plate in high-speed collision. On the other hand, numerical simulations are carried out by considering various element sizes and the relationship between element size and failure strain is inversely obtained using numerical results. By accommodating the relationship into the damage model and implementing in the user-defined material model, mesh dependency is significantly reduced, and sufficient accuracy is achieved with alleviated computational cost than the existing damage model. This study suggests an element size-dependent damage criterion that is applicable for impact simulation and it is expected that the criterion is useful to obtain accurate impact responses with a small computational cost.

Study on effect of laser-induced ablation for Lamb waves in a thin plate.

In this paper, the effect of ablation on the shape of elastic waves generated by laser excitation is studied numerically and experimentally. Laser-induced ultrasound has been widely used in the nondestructive testing (NDT) field because it has the advantage that the sensor does not have to be directly attached to the target structure. In the safety assessment process, low energy excitation is used, and thus the structure is not damaged. Most studies related to laser ultrasound have focused on the method of detecting cracks within the elastic range, and there have been few studies on the effect of ablation. This research consists of experiments and numerical analyses. In experiments, elastic waves were generated in an aluminum plate by projecting laser pulses with different energy intensities. The velocities in the thickness direction were measured using a Laser Doppler Velocimeter (LDV) at a point 135 mm away from the excitation point. In the numerical study, two numerical simulations were carried out using heat flux and normal stress input to mimic laser pulse excitation. A thermo-mechanical simulation by heat flux was conducted to simulate thermal expansion by the laser pulse, and the normal stress was applied to reflect the effect of radiation pressure by ablation, respectively. Waveforms were synthesized by using different magnitude ratios of the obtained numerical responses and were compared with the experiment results. It is found that the effect of radiation pressure should not be neglected if the energy intensity is large although the effect of radiation pressure decreases as the energy intensity decreases. At the energy intensity with which ablation occurs, the effects of thermal expansion and radiation pressure exist simultaneously, and the contribution to the response depends on the energy intensity.

Multifunctional Polymer Nanocomposites Reinforced by 3D Continuous Ceramic Nanofillers.

Polymer nanocomposites with inclusion of ceramic nanofillers have relatively high yield strength, elastic moduli, and toughness that therefore are widely used as functional coating and films for optoelectronic applications. Although the mechanical properties are enhanced with increasing the fraction of nanofiller inclusion, there generally is an upper limit on the amount of nanofiller inclusion because the aggregation of the fillers in the polymer matrix, which typically occurs, degrades the mechanical and/or optical performances above 5 vol % of inclusions. Here, we demonstrate an unconventional polymer nanocomposite composed of a uniformly distributed three-dimensional (3D) continuous ceramic nanofillers, which allows for extremely high loading (∼19 vol %) in the polymer matrix without any concern of aggregation and loss in transparency. The fabrication strategy involves conformal deposition of Al2O3 nanolayer with a precise control in thickness that ranges from 12 to 84 nm on a 3D nanostructured porous polymer matrix followed by filling the pores with the same type of polymer. The 3D continuous Al2O3 nanolayers embedded in the matrix with extremely high filler rate of 19.17 vol % improve compressive strength by 142% compared to the pure epoxy without Al2O3 filler, and this value is in agreement with theoretically predicted strength through the rule of mixture. These 3D nanocomposites show superb transparency in the visible (>85% at 600 nm) and near-IR (>90% at 1 µm) regions and improved heat dissipation beyond that of conventional Al2O3 dispersed nanocomposites with similar filler loading of 15.11 vol % due to the existence of a continuous thermal conduction path through the oxide network.

Modeling of three-dimensional Lamb wave propagation excited by laser pulses.

As a type of broadband source of ultrasonic guided waves, laser pulses can be used to launch all modes of interests. In this paper, Lamb waves are excited by imposing heat flux mimicking the supply of the heat from laser pulses, and effects by defects on the received Lamb waves in a plate are investigated by means of the finite element method. In order to alleviate the heavy computational cost in solving the coupled finite element equations, a sub-regioning scheme is employed, and it reduces the computational cost significantly. A comparison of Lamb waves generated by unfocused and line-focused laser sources is conducted. To validate numerical simulations, the group velocity of A0 mode is calculated based on the received signal by using the wavelet transform. The result of A0 mode group velocity is compared with the solution of Rayleigh-Lamb equations, and close agreement is observed. Lamb waves in a plate with defects of different lengths are examined next. The out-of-plane displacement in the plate with a defect is compared with the displacement in the plate without defects, and the wavelet transform is used to determine the arrival times of Lamb waves traveling at the A0 mode group velocity. A strong correlation is observed between the extent of defects and the magnitude of wavelet coefficients.

Mechanical impedance measurement and damage detection using noncontact laser ultrasound.

This Letter proposes a mechanical impedance (MI) measurement technique using noncontact laser ultrasound. The ultrasound is generated by shooting a pulse laser beam onto a target structure, and its response is measured using a laser vibrometer. Once ultrasound propagation converges to structural vibration, MI is formed over the entire structure. Because noncontact lasers are utilized, this technique is applicable in harsh environments, free of electromagnetic interference, and able to perform wide-range scanning. The formation of MI and its feasibility for damage detection are verified through thermo-mechanical finite element analysis and lab-scale experiments.

Longitudinal differences in the mechanical properties of the thoracic aorta depend on circumferential regions.

Understanding the mechanical behavior of the arterial wall and its spatial variations is essential for the study of vascular physiopathology and the design of biomedical devices that interact with the arterial wall. Although it is generally accepted that the aortic wall gets stiffer along its length, the spatial variations in the mechanical behavior of the thoracic aorta are not well understood. In this study, therefore, we investigate both longitudinal and circumferential variations in the mechanical properties of the porcine descending thoracic aorta. Using a previously developed experimental method and stress-strain analysis, the stress, stretch, tangent modulus (TM), and pressure-strain elastic modulus (PSEM) are estimated in the range of in vivo pressure. The results show that the longitudinal differences of both TM and PSEM are statistically significant in the posterior region but not in the anterior region. Both moduli are greater in the posterior distal region when compared with the other test regions. The findings of this study meet a need for clarifying the region investigated, especially in circumferential region, to study the regional variations in biomechanics of blood vessels.