Radiation-induced bone loss in mice is ameliorated by inhibition of HIF-2α in skeletal progenitor cells.

Radiotherapy remains a common treatment modality for cancer despite skeletal complications. However, there are currently no effective treatments for radiation-induced bone loss, and the consequences of radiotherapy on skeletal progenitor cell (SPC) survival and function remain unclear. After radiation, leptin receptor-expressing cells, which include a population of SPCs, become localized to hypoxic regions of the bone and stabilize the transcription factor hypoxia-inducible factor-2α (HIF-2α), thus suggesting a role for HIF-2α in the skeletal response to radiation. Here, we conditionally knocked out HIF-2α in leptin receptor-expressing cells and their descendants in mice. Radiation therapy in littermate control mice reduced bone mass; however, HIF-2α conditional knockout mice maintained bone mass comparable to nonirradiated control animals. HIF-2α negatively regulated the number of SPCs, bone formation, and bone mineralization. To test whether blocking HIF-2α pharmacologically could reduce bone loss during radiation, we administered a selective HIF-2α inhibitor called PT2399 (a structural analog of which was recently FDA-approved) to wild-type mice before radiation exposure. Pharmacological inhibition of HIF-2α was sufficient to prevent radiation-induced bone loss in a single-limb irradiation mouse model. Given that ~90% of patients who receive a HIF-2α inhibitor develop anemia because of off-target effects, we developed a bone-targeting nanocarrier formulation to deliver the HIF-2α inhibitor to mouse bone, to increase on-target efficacy and reduce off-target toxicities. Nanocarrier-loaded PT2399 prevented radiation-induced bone loss in mice while reducing drug accumulation in the kidney. Targeted inhibition of HIF-2α may represent a therapeutic approach for protecting bone during radiation therapy.

Multi-Functional Small Molecule Alleviates Fracture Pain and Promotes Bone Healing.

Bone injuries such as fractures are one major cause of morbidities worldwide. A considerable number of fractures suffer from delayed healing, and the unresolved acute pain may transition to chronic and maladaptive pain. Current management of pain involves treatment with NSAIDs and opioids with substantial adverse effects. Herein, we tested the hypothesis that the purine molecule, adenosine, can simultaneously alleviate pain and promote healing in a mouse model of tibial fracture by targeting distinctive adenosine receptor subtypes in different cell populations. To achieve this, a biomaterial-assisted delivery of adenosine is utilized to localize and prolong its therapeutic effect at the injury site. The results demonstrate that local delivery of adenosine inhibited the nociceptive activity of peripheral neurons through activation of adenosine A1 receptor (ADORA1) and mitigated pain as demonstrated by weight bearing and open field movement tests. Concurrently, local delivery of adenosine at the fracture site promoted osteogenic differentiation of mesenchymal stromal cells through adenosine A2B receptor (ADORA2B) resulting in improved bone healing as shown by histological analyses and microCT imaging. This study demonstrates the dual role of adenosine and its material-assisted local delivery as a feasible therapeutic approach to treat bone trauma and associated pain.

Spinal cord repair is modulated by the neurogenic factor Hb-egf under direction of a regeneration-associated enhancer.

Unlike adult mammals, zebrafish regenerate spinal cord tissue and recover locomotor ability after a paralyzing injury. Here, we find that ependymal cells in zebrafish spinal cords produce the neurogenic factor Hb-egfa upon transection injury. Animals with hb-egfa mutations display defective swim capacity, axon crossing, and tissue bridging after spinal cord transection, associated with disrupted indicators of neuron production. Local recombinant human HB-EGF delivery alters ependymal cell cycling and tissue bridging, enhancing functional regeneration. Epigenetic profiling reveals a tissue regeneration enhancer element (TREE) linked to hb-egfa that directs gene expression in spinal cord injuries. Systemically delivered recombinant AAVs containing this zebrafish TREE target gene expression to crush injuries of neonatal, but not adult, murine spinal cords. Moreover, enhancer-based HB-EGF delivery by AAV administration improves axon densities after crush injury in neonatal cords. Our results identify Hb-egf as a neurogenic factor necessary for innate spinal cord regeneration and suggest strategies to improve spinal cord repair in mammals.

Microgel-Assisted Delivery of Adenosine to Accelerate Fracture Healing.

Extracellular adenosine plays a key role in promoting bone tissue formation. Local delivery of adenosine could be an effective therapeutic strategy to harness the beneficial effect of extracellular adenosine on bone tissue formation following injury. Herein, we describe the development of an injectable in situ curing scaffold containing microgel-based adenosine delivery units. The two-component scaffold includes adenosine-loaded microgels and functionalized hyaluronic acid (HA) molecules. The microgels were generated upon copolymerization of 3-acrylamidophenylboronic acid (3-APBA)- and 2-aminoethylmethacrylamide (2-AEMA)-conjugated HA (HA-AEMA) in an emulsion suspension. The PBA functional groups were used to load the adenosine molecules. Mixing of the microgels with the HA polymers containing clickable groups, dibenzocyclooctyne (DBCO) and azide (HA-DBCO and HA-Azide), resulted in a 3D scaffold embedded with adenosine delivery units. Application of the in situ curing scaffolds containing adenosine-loaded microgels following tibial fracture injury showed improved bone tissue healing in a mouse model as demonstrated by the reduced callus size, higher bone volume, and increased tissue mineral density compared to those treated with the scaffold without adenosine. Overall, our results suggest that local delivery of adenosine could potentially be an effective strategy to promote bone tissue repair.

pH-Sensitive nanocarrier assisted delivery of adenosine to treat osteoporotic bone loss.

Bone tissue undergoes continuous remodeling via osteoclast-mediated bone resorption and osteoblast-mediated bone formation. An imbalance in this process with enhanced osteoclastic activity can lead to excessive bone resorption, resulting in bone thinning. Once activated, osteoclasts bind to the bone surface and acidify the local niche. This acidic environment could serve as a potential trigger for the delivery of therapeutic agents into the osteoporotic bone tissue. To this end, we developed a pH-responsive nanocarrier-based drug delivery system that binds to the bone tissue and delivers an osteoanabolic molecule, adenosine. Adenosine is incorporated into a hyaluronic acid (HA)-based nanocarrier through a pH-sensitive ketal group. The HA-nanocarrier is further functionalized with alendronate moieties to improve binding to the bone tissues. Systemic administration of the nanocarrier containing adenosine attenuated bone loss in ovariectomized mice and showed comparable bone qualities to that of healthy mice. Delivery of osteoanabolic small molecules that can contribute to bone formation and inhibit excessive osteoclast activity by leveraging the tissue-specific milieu could serve as viable therapeutics for osteoporosis.

An In Vitro Microfluidic Alveolus Model to Study Lung Biomechanics.

The gas exchange units of the lung, the alveoli, are mechanically active and undergo cyclic deformation during breathing. The epithelial cells that line the alveoli contribute to lung function by reducing surface tension via surfactant secretion, which is highly influenced by the breathing-associated mechanical cues. These spatially heterogeneous mechanical cues have been linked to several physiological and pathophysiological states. Here, we describe the development of a microfluidically assisted lung cell culture model that incorporates heterogeneous cyclic stretching to mimic alveolar respiratory motions. Employing this device, we have examined the effects of respiratory biomechanics (associated with breathing-like movements) and strain heterogeneity on alveolar epithelial cell functions. Furthermore, we have assessed the potential application of this platform to model altered matrix compliance associated with lung pathogenesis and ventilator-induced lung injury. Lung microphysiological platforms incorporating human cells and dynamic biomechanics could serve as an important tool to delineate the role of alveolar micromechanics in physiological and pathological outcomes in the lung.

Molecularly Tailored Interface for Long-Term Xenogeneic Cell Transplantation.

Encapsulation of therapeutic cells in a semipermeable device can mitigate the need for systemic immune suppression following cell transplantation by providing local immunoprotection while being permeable to nutrients, oxygen, and different cell-secreted biomolecules. However, fibrotic tissue deposition around the device has been shown to compromise the long-term function of the transplanted cells. Herein, a macroencapsulation device design that improves long-term survival and function of the transplanted cells is reported. The device is comprised of a semipermeable chitosan pouch with a tunable reservoir and molecularly engineered interface. The chitosan pouch interface decorated with 1,12-dodecanedioic acid (DDA), limits the cell adhesion and vigorous foreign body response while maintaining the barrier properties amenable to cell encapsulation. The device provides long-term protection to the encapsulated human primary hepatocytes in the subcutaneous space of immunocompetent mice. The device supports the encapsulated cells for up to 6 months as evident from cell viability and presence of human specific albumin in circulation. Solutions that integrate biomaterials and interfacial engineering such as the one described here may advance development of easy-to manufacture and retrievable devices for the transplantation of therapeutic cells in the absence of immunosuppression.

Self-Healing of Hyaluronic Acid to Improve In Vivo Retention and Function.

Convergent advances in the field of soft matter, macromolecular chemistry, and engineering have led to the development of biomaterials that possess autonomous, adaptive, and self-healing characteristics similar to living systems. These rationally designed biomaterials can surpass the capabilities of their parent material. Herein, the modification of hyaluronic acid (HA) to exhibit self-healing properties is described, and its physical and biological function both in vitro and in vivo is studied. The in vitro findings showed that self-healing HA designed to undergo self-repair improves lubrication, enhances free radical scavenging, and attenuates enzymatic degradation compared to unmodified HA. Longitudinal imaging following intraarticular injection of self-healing HA shows improved in vivo retention despite its low molecular weight. Concomitant with these functions, intraarticular injection of self-healing HA mitigates anterior cruciate ligament injury-mediated cartilage degeneration in rodents. This proof-of-concept study shows how incorporation of functional properties such as self-healing can be used to surpass the existing capabilities of biolubricants.

Bone targeting nanocarrier-assisted delivery of adenosine to combat osteoporotic bone loss.

Extracellular adenosine has been shown to play a key role in maintaining bone health and could potentially be used to treat bone loss. However, systemic administration of exogenous adenosine to treat bone disorders remains a challenge due to the ubiquitous presence of adenosine receptors in different organs and the short half-life of adenosine in circulation. Towards this, we have developed a bone-targeting nanocarrier and determined its potential for systemic administration of adenosine. The nanocarrier, synthesized via emulsion suspension photopolymerization, is comprised of hyaluronic acid (HA) copolymerized with phenylboronic acid (PBA), a moiety that can form reversible bonds with adenosine. The bone binding affinity of the nanocarrier was achieved by alendronate (Aln) conjugation. Nanocarriers functionalized with the alendronate (Aln-NC) showed a 45% higher accumulation in the mice vertebrae in vivo compared to those lacking alendronate molecules (NCs). Systemic administration of adenosine via bone-targeting nanocarriers (Aln-NC) attenuated bone loss in ovariectomized (OVX) mice. Furthermore, bone tissue of mice treated with adenosine-loaded Aln-NC displayed trabecular bone characteristics comparable to healthy controls as shown by microcomputed tomography, histochemical staining, bone labeling, and mechanical strength. Overall, our results demonstrate the use of a bone-targeting nanocarrier towards systemic administration of adenosine and its application in treating bone degenerative diseases such as osteoporosis.

Living with arsenic in the environment: An examination of current awareness of farmers in the Bengal basin using hybrid feature selection and machine learning.

High levels of arsenic in drinking water and food materials continue to pose a global health challenge. Over 127 million people alone in Bangladesh (BD) and West Bengal (WB) state of India are exposed to elevated levels of arsenic in drinking water. Despite decades of research and outreach, arsenic awareness in communities continue to be low. Specifically, very few studies reported arsenic awareness among low-income farming communities. A comprehensive approach to assess arsenic awareness is a key step in identifying research and development priorities so that appropriate stakeholder engagement may be designed to tackle arsenic menace. In this study, we developed a comprehensive arsenic awareness index (CAAI) and identified key awareness drivers (KADs) of arsenic to help evaluate farmers' preferences in dealing with arsenic in the environment. The CAAI and KADs were developed using a questionnaire survey in conjunction with ten machine learning (ML) models coupled with a hybrid feature selection approach. Two questionnaire surveys comprising of 73 questions covering health, water and community, and food were conducted in arsenic-affected areas of WB and BD. Comparison of CAAIs showed that the BD farmers were generally more arsenic-aware (CAAI = 7.7) than WB farmers (CAAI = 6.8). Interestingly, the reverse was true for the awareness linked to arsenic in the food chain. Application of hybrid feature selection identified 15 KADs, which included factors related to stakeholder interventions and cropping practices instead of commonly perceived factors such as age, gender and income. Among ML algorithms, classification and regression trees and single C5.0 tree could estimate CAAIs with an average accuracy of 84%. Both communities agreed on policy changes on water testing and clean water supply. The CAAI and KADs combination revealed a contrasting arsenic awareness between the two farming communities, albeit their cultural similarities. Specifically, our study shows the need for increasing awareness of risks through the food chain in BD, whereas awareness campaigns should be strengthened to raise overall awareness in WB possibly through media channels as deemed effective in BD.

Charge-Switchable Polymeric Coating Kills Bacteria and Prevents Biofilm Formation in Vivo.

Preventing bacterial biofilm formation on medical devices and implants in vivo still remains a daunting task. Current antibacterial coatings to combat implant-associated infections are generally composed of toxic metals or nondegradable polymers and involve multistep surface modifications. Here, we present a charge-switchable antibacterial and antibiofilm coating based on water-insoluble cationic hydrophobic polymers that are soluble in organic solvents and can be noncovalently coated onto different surfaces. Toward this, a library of quaternary polyethylenimine (QPEI) polymers with an amide or ester group in their pendant alkyl chain was developed. These QPEIs are shown to hydrolyze from active cationic to nontoxic zwitterionic polymers under acidic or enzymatic conditions. Notably, polymers with both zwitterionic and cationic groups, obtained upon partial hydrolysis of QPEIs, are shown to retain their antibacterial activity with much lower toxicity toward mammalian cells. Furthermore, the zwitterionic polymer, a fully hydrolyzed product of the QPEIs, is shown to be nontoxic to mammalian cells in vitro as well as in vivo. The QPEIs, when coated onto surfaces, kill bacteria and prevent formation of biofilms. In an in vivo mice model, the QPEI-coated medical grade catheter is shown to reduce methicillin-resistant Staphylococcus aureus contamination both on the catheter surface and in the adjacent tissues (99.99% reduction compared to a noncoated catheter). Additionally, biofilm formation is inhibited on the catheter surface with negligible inflammation in the adjacent tissue. The above results thus highlight the importance of these polymers to be used as effective antibacterial coatings in biomedical applications.

Biomaterial-assisted local and systemic delivery of bioactive agents for bone repair.

Although bone tissues possess an intrinsic capacity for repair, there are cases where bone healing is either impaired or insufficient, such as fracture non-union, osteoporosis, osteomyelitis, and cancers. In these cases, treatments like surgical interventions are used, either alone or in combination with bioactive agents, to promote tissue repair and manage associated clinical complications. Improving the efficacy of bioactive agents often requires carriers, with biomaterials being a pivotal player. In this review, we discuss the role of biomaterials in realizing the local and systemic delivery of biomolecules to the bone tissue. The versatility of biomaterials enables design of carriers with the desired loading efficiency, release profile, and on-demand delivery. Besides local administration, systemic administration of drugs is necessary to combat diseases like osteoporosis, warranting bone-targeting drug delivery systems. Thus, chemical moieties with the affinity towards bone extracellular matrix components like apatite minerals have been widely utilized to create bone-targeting carriers with better biodistribution, which cannot be achieved by the drugs alone. Bone-targeting carriers combined with the desired drugs or bioactive agents have been extensively investigated to enhance bone healing while minimizing off-target effects. Herein, these advancements in the field have been systematically reviewed. STATEMENT OF SIGNIFICANCE: Drug delivery is imperative when surgical interventions are not sufficient to address various bone diseases/defects. Biomaterial-assisted delivery systems have been designed to provide drugs with the desired loading efficiency, sustained release, and on-demand delivery to enhance bone healing. By surveying recent advances in the field, this review outlines the design of biomaterials as carriers for the local and systemic delivery of bioactive agents to the bone tissue. Particularly, biomaterials that bear chemical moieties with affinity to bone are attractive, as they can present the desired bioactive agents to the bone tissue efficiently and thus enhance the drug efficacy for bone repair.

Stimuli-Responsive Supramolecular Hydrogels and Their Applications in Regenerative Medicine.

Supramolecular hydrogels are a class of self-assembled network structures formed via non-covalent interactions of the hydrogelators. These hydrogels capable of responding to external stimuli are considered to be smart materials due to their ability to undergo sol-gel and/or gel-sol transition upon subtle changes in their surroundings. Such stimuli-responsive hydrogels are intriguing biomaterials with applications in tissue engineering, delivery of cells and drugs, modulating tissue environment to promote innate tissue repair, and imaging for medical diagnostics among others. This review summarizes the recent developments in stimuli-responsive supramolecular hydrogels and their potential applications in regenerative medicine. Specifically, various structural aspects of supramolecular hydrogelators involved in self-assembly, the role of external stimuli in tuning/controlling their phase transitions, and how these functions could be harnessed to advance applications in regenerative medicine are focused on. Finally, the key challenges and future prospects for these versatile materials are briefly described.

Dual-Function Polymer-Silver Nanocomposites for Rapid Killing of Microbes and Inhibiting Biofilms.

Polymer-silver nanocomposites have emerged as an integral weapon to combat device-related infections. However, synthesis of the nanocomposites still remains a major challenge that often involves two-step process in which silver nanoparticles are synthesized ex situ. Additionally, polymers used in the nanocomposites are commonly not antimicrobial and biodegradable thus often lack bioactivity and biocompatibility. Herein we report highly active dual-function polymer-silver nanocomposites consisting of an inherently antimicrobial and biodegradable polymer in one-pot. A simple method of in situ reduction of a silver salt was employed to synthesize the silver nanoparticles (5-15 nm) from silver para-toluenesulfonate in which the intrinsically biodegradable and antimicrobial polymer N,N-dimethyl-N-hexadecyl ammonium chitin tosylate acted as reducing as well as stabilizing agent. The nanocomposite with the water-insoluble and organo-soluble polymer was simply painted onto surfaces via facile noncovalent immobilization. Notably, composite-coated surfaces inactivated both drug-sensitive and drug-resistant bacteria including pathogenic fungi at a much faster rate than polymer alone. The composites released active silver ions over an extended period of time and displayed remarkably long-lasting activity. In addition, surfaces coated with composites effectively inhibited both bacterial and fungal biofilm formation. Further, upon coating on catheter, the nanocomposites reduced methicillin-resistant Staphylococcus aureus (MRSA) burden both on catheter (>99.99% reduction) and in tissues surrounding the catheter (>99.999% reduction) in a mice model. These novel nanomaterials that showed negligible hemolysis toward human erythrocytes might be used as safe and effective antimicrobial coatings in biomedical device applications.

Dual Function Injectable Hydrogel for Controlled Release of Antibiotic and Local Antibacterial Therapy.

We present vancomycin-loaded dual-function injectable hydrogel that delivers antibiotic locally suitable for treatment of infections in avascular or necrotic tissues. The syringe-deliverable gels were developed using polydextran aldehyde and an inherently antibacterial polymer N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride along with vancomycin. The antibiotic was primarily encapsulated via reversible imine bonds formed between vancomycin and polydextran aldehyde in the hydrogel which allowed sustained release of vancomycin over an extended period of time in a pH-dependent manner. Being inherently antibacterial, the gels displayed excellent efficacy against bacteria due to dual mode of action (killing bacteria upon contact as well as by releasing antibiotics into surroundings). Upon subcutaneous implantation, the gel was shown to kill methicillin-resistant Staphylococcus aureus (>99.999%) when bacteria were introduced directly into the gel as well as at distal site from the gel in a mice model. These materials thus represent as novel noninvasive drug-delivery device suitable for local antibiotic therapy.

Direct Synthesis of Dextran-Based Antibacterial Hydrogels for Extended Release of Biocides and Eradication of Topical Biofilms.

Cationic small molecular biocides have been developed as promising antibiofilm agents because of their tunability in chemical structures and their ability to disrupt established biofilms. However, the impact of biocides in antibiofilm treatment is largely limited due to the lack of an effective delivery system that can ensure sustained release of biocides at the target site. Herein we report a biocide-encapsulated antibacterial and antibiofilm hydrogel that acts as an efficient delivery vehicle for the biocide and eradicates matured bacterial biofilm. The hydrogels are prepared using dextran methacrylate (Dex-MA), a biocompatible and photopolymerizable polymer, and a nontoxic cationic biocide with two cationic charges, two nonpeptidic amide bonds, and optimized amphiphilicity, which is capable of eradicating established bacterial biofilms. The gels, prepared via direct loading of the biocide and with highly controllable amounts, display 100% activity against both drug-sensitive and drug-resistant bacteria such as methicillin-resistant Staphylococcus aureus (MRSA). Importantly, the gels are shown to release the biocide and kill bacteria for an extended period of time (until day 5). When being treated with the established bacterial biofilms, the released biocide from the gel is shown to completely eradicate establishedS. aureus, Escherichia coli, and MRSA biofilms, the most common biofilm forming bacteria that cause severe infections (e.g., skin infections, urinary tract infections, etc.) in humans. Moreover, the gels were shown to annihilate preformed MRSA biofilm with >99.99% bacterial reduction under in vitro and in vivo conditions in a superficial MRSA infection model in mice. Notably, when tested, excellent skin compatibility is observed for these materials in various animal models such as a rat model of acute dermal toxicity, guinea pig model of skin sensitization, and rabbit model of skin irritation. The biocompatible antibacterial and antibiofilm hydrogels developed herein thus might be useful in treating bacterial biofilm associated infections, especially topical infections.

Biocompatible Injectable Hydrogel with Potent Wound Healing and Antibacterial Properties.

Two component injectable hydrogels that cross-link in situ have been used as noninvasive wound-filling devices, i.e., sealants. These materials carry a variety of functions at the wound sites, such as sealing leaks, ceasing unwanted bleeding, binding tissues together, and assisting in wound healing processes. However, commonly used sealants typically lack antibacterial properties. Since bacterial infection at the wound site is very common, bioadhesive materials with intrinsic antibacterial properties are urgently required. Herein, we report a biocompatible injectable hydrogel with inherent bioadhesive, antibacterial, and hemostatic capabilities suitable for wound sealing applications. The hydrogels were developed in situ from an antibacterial polymer, N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC), and a bioadhesive polymer, polydextran aldehyde. The gels were shown to be active against both Gram-positive and Gram-negative bacteria, including drug-resistant ones such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VRE), and ß-lactam-resistant Klebsiela pneumoniae. Mechanistic studies revealed that the gels killed bacteria upon contact by disrupting the membrane integrity of the pathogen. Importantly, the gels were shown to be efficacious in preventing sepsis in a cecum ligation and puncture (CLP) model in mice. While only 12.5% of animals survived in the case of mice with punctured cecam but with no gel on the punctured area (control), 62.5% mice survived when the adhesive gel was applied to the punctured area. Furthermore, the gels were also shown to be effective in facilitating wound healing in rats and ceasing bleeding from a damaged liver in mice. Notably, the gel showed negligible toxicity toward human red blood cells (only 2-3% hemolysis) and no inflammation to the surrounding tissue upon subcutaneous implantation in mice, thus proving it as a safe and effective antibacterial sealant.

Antibacterial and Antibiofilm Activity of Cationic Small Molecules with Spatial Positioning of Hydrophobicity: An in Vitro and in Vivo Evaluation.

More than 80% of the bacterial infections are associated with biofilm formation. To combat infections, amphiphilic small molecules have been developed as promising antibiofilm agents. However, cytotoxicity of such molecules still remains a major problem. Herein we demonstrate a concept in which antibacterial versus cytotoxic activities of cationic small molecules are tuned by spatial positioning of hydrophobic moieties while keeping positive charges constant. Compared to the molecules with more pendent hydrophobicity from positive centers (MIC = 1-4 µg/mL and HC50 = 60-65 µg/mL), molecules with more confined hydrophobicity between two centers show similar antibacterial activity but significantly less toxicity toward human erythrocytes (MIC = 1-4 µg/mL and HC50 = 805-1242 µg/mL). Notably, the optimized molecule is shown to be nontoxic toward human cells (HEK 293) at a concentration at which it eradicates established bacterial biofilms. The molecule is also shown to eradicate preformed bacterial biofilm in vivo in a murine model of superficial skin infection.

A Biodegradable Polycationic Paint that Kills Bacteria in Vitro and in Vivo.

Bacterial colonization and subsequent formation of biofilms onto surfaces of medical devices and implants is a major source of nosocomial infections. Most antibacterial coatings to combat infections are either metal-based or nondegradable-polymer-based and hence limited by their nondegradability and unpredictable toxicity. Moreover, to combat infections effectively, the coatings are required to display simultaneous antibacterial and antibiofilm activity. Herein we report biocompatible and biodegradable coatings based on organo-soluble quaternary chitin polymers which were immobilized noncovalently onto surfaces as bactericidal paint. The polycationic paint was found to be active against both drug-sensitive and -resistant bacteria such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VRE), and ß-lactam-resistant Klebsiella pneumoniae. The cationic polymers were shown to interact with the negatively charged bacterial cell membrane and disrupt the membrane integrity, thereby causing leakage of intracellular constituents and cell death upon contact. Importantly, surfaces coated with the polymers inhibited formation of biofilms against both Gram-positive S. aureus and Gram-negative E. coli, two of the most clinically important bacteria that form biofilms. Surfaces coated with the polymers displayed negligible toxicity against human erythrocytes and embryo kidney cells. Notably, the polymers were shown to be susceptible toward lysozyme. Furthermore, subcutaneous implantation of polymer discs in rats led to 15-20% degradation in 4 weeks thereby displaying their biodegradability. In a murine model of subcutaneous infection, polymer-coated medical-grade catheter reduced MRSA burden by 3.7 log compared to that of noncoated catheter. Furthermore, no biofilm development was observed on the coated catheters under in vivo conditions. The polycationic materials thus developed herein represent a novel class of safe and effective coating agents for the prevention of device-associated infections.

Chitosan Derivatives Active against Multidrug-Resistant Bacteria and Pathogenic Fungi: In Vivo Evaluation as Topical Antimicrobials.

The continuous rise of antimicrobial resistance and the dearth of new antibiotics in the clinical pipeline raise an urgent call for the development of potent antimicrobial agents. Cationic chitosan derivatives, N-(2-hydroxypropyl)-3-trimethylammonium chitosan chlorides (HTCC), have been widely studied as potent antibacterial agents. However, their systemic structure-activity relationship, activity toward drug-resistant bacteria and fungi, and mode of action are very rare. Moreover, toxicity and efficacy of these polymers under in vivo conditions are yet to be established. Herein, we investigated antibacterial and antifungal efficacies of the HTCC polymers against multidrug resistant bacteria including clinical isolates and pathogenic fungi, studied their mechanism of action, and evaluated cytotoxic and antimicrobial activities in vitro and in vivo. The polymers were found to be active against both bacteria and fungi (MIC = 125-250 µg/mL) and displayed rapid microbicidal kinetics, killing pathogens within 60-120 min. Moreover, the polymers were shown to target both bacterial and fungal cell membrane leading to membrane disruption and found to be effective in hindering bacterial resistance development. Importantly, very low toxicity toward human erythrocytes (HC50 = >10000 µg/mL) and embryo kidney cells were observed for the cationic polymers in vitro. Further, no inflammation toward skin tissue was observed in vivo for the most active polymer even at 200 mg/kg when applied on the mice skin. In a murine model of superficial skin infection, the polymer showed significant reduction of methicillin-resistant Staphylococcus aureus (MRSA) burden (3.2 log MRSA reduction at 100 mg/kg) with no to minimal inflammation. Taken together, these selectively active polymers show promise to be used as potent antimicrobial agents in topical and other infections.