RESUMEN
The solvent-free selective hydrogenation of nitroaromatics to azoxy compounds is highly important, yet challenging. Herein, we report an efficient strategy to construct individually dispersed Co atoms decorated on niobium pentaoxide nanomeshes with unique geometric and electronic properties. The use of this supported Co single atom catalysts in the selective hydrogenation of nitrobenzene to azoxybenzene results in high catalytic activity and selectivity, with 99% selectivity and 99% conversion within 0.5 h. Remarkably, it delivers an exceptionally high turnover frequency of 40377 h-1, which is amongst similar state-of-the-art catalysts. In addition, it demonstrates remarkable recyclability, reaction scalability, and wide substrate scope. Density functional theory calculations reveal that the catalytic activity and selectivity are significantly promoted by the unique electronic properties and strong electronic metal-support interaction in Co1/Nb2O5. The absence of precious metals, toxic solvents, and reagents makes this catalyst more appealing for synthesizing azoxy compounds from nitroaromatics. Our findings suggest the great potential of this strategy to access single atom catalysts with boosted activity and selectivity, thus offering blueprints for the design of nanomaterials for organocatalysis.
RESUMEN
The development of rechargeable zinc-air batteries is heavily dependent on bifunctional oxygen electrocatalysts to offer exceptional oxygen reduction/evolution reaction (ORR/OER) activities. However, the design of such electrocatalysts with high activity and durability is challenging. Herein, a strategy is proposed to create an electrocatalyst comprised of copper-cobalt diatomic sites on a highly porous nitrogen-doped carbon matrix (Cu-Co/NC) with abundantly accessible metal sites and optimal geometric and electronic structures. Experimental findings and theoretical calculations demonstrate that the synergistic effect of Cu-Co dual-metal sites with metal-N4 coordination induce asymmetric charge distributions with moderate adsorption/desorption behavior with oxygen intermediates. This electrocatalyst exhibits extraordinary bifunctional oxygen electrocatalytic activities in alkaline media, with a half-wave potential of 0.92 V for ORR and a low overpotential of 335 mV at 10 mA cm-2 for OER. In addition, it demonstrates exceptional ORR activity in acidic (0.85 V) and neutral (0.74 V) media. When applied to a zinc-air battery, it achieves extraordinary operational performance and outstanding durability (510 h), ranking it as one of the most efficient bifunctional electrocatalysts reported to date. This work demonstrates the importance of geometric and electronic engineering of isolated dual-metal sites for boosting bifunctional electrocatalytic activity in electrochemical energy devices.
RESUMEN
A fundamental understanding of metal active sites in single-atom catalysts (SACs) is important and challenging in the development of high-performance catalyst systems. Here, a highly efficient and straightforward molten-salt-assisted approach is reported to create atomically dispersed cobalt atoms supported over vanadium pentoxide layered material, with each cobalt atom coordinated with four neighboring oxygen atoms. The liquid environment and the strong polarizing force of the molten salt at high temperatures potentially favor the weakening of VO bonding and the formation of CoO bonding on the vanadium oxide surface. This cobalt SAC achieves extraordinary catalytic efficiency in acceptorless dehydrogenative coupling of alcohols with amines to give imines, with more than 99% selectivity under almost 100% conversion within 3 h, along with a high turnover frequency (TOF) of 5882 h-1 , exceeding those of previously reported benchmarking catalysts. Moreover, it delivers excellent recyclability, reaction scalability, and substrate tolerance. Density functional theory (DFT) calculations further confirm that the optimized coordination environment and strong electronic metal-support interaction contribute significantly to the activation of reactants. The findings provide a feasible route to construct SACs at the atomic level for use in organic transformations.
RESUMEN
Rechargeable zinc-air batteries typically require efficient, durable, and inexpensive bifunctional electrocatalysts to support oxygen reduction/evolution reactions (ORR/OER). However, sluggish kinetics and mass transportation challenges must be addressed if the performance of these catalysts is to be enhanced. Herein, a strategy to fabricate a catalyst comprising atomically dispersed iron atoms supported on a mesoporous nitrogen-doped carbon support (Fe SAs/NC) with accessible metal sites and optimized electronic metal-support interactions is developed. Both the experimental results and theoretical calculations reveal that the engineered electronic structures of the metal active sites can regulate the charge distribution of Fe centers to optimize the adsorption/desorption of oxygenated intermediates. The Fe SAs/NC containing Fe1 N4 O1 sites achieves remarkable ORR activity over the entire pH range, with half-wave potentials of 0.93, 0.83, and 0.75 V (vs reversible hydrogen electrode) in alkaline, acidic, and neutral electrolytes, respectively. In addition, it demonstrates a promising low overpotential of 320 mV at 10 mA cm-2 for OER in alkaline conditions. The zinc-air battery assembled with Fe SAs/NC exhibits superior performance than that of Pt/C+RuO2 counterpart in terms of peak power density, specific capacity, and cycling stability. These findings demonstrate the importance of the electronic structure engineering of metal sites in directing catalytic activity.
RESUMEN
The facile creation of high-performance single-atom catalysts (SACs) is intriguing in heterogeneous catalysis, especially on 2D transition-metal dichalcogenides. An efficient spontaneous reduction approach to access atomically dispersed iron atoms supported over defect-containing MoS2 nanosheets is herein reported. Advanced characterization methods demonstrate that the isolated iron atoms situate atop of molybdenum atoms and coordinate with three neighboring sulfur atoms. This Fe SAC delivers exceptional catalytic efficiency (1 atm O2 @ 120 °C) in the selective oxidation of benzyl alcohol to benzaldehyde, with 99% selectivity under almost 100% conversion. The turnover frequency is calculated to be as high as 2105 h-1 . Moreover, it shows admirable recyclability, storage stability, and substrate tolerance. Density functional theory calculations reveal that the high catalytic activity stems from the optimized electronic structure of single iron atoms over the MoS2 support.
RESUMEN
The benzannulated N-heterocyclic carbene, 1,3-dibenzylbenzimidazolylidene (NHCDBZ) forms large, highly ordered domains when adsorbed on Cu(111) under ultrahigh vacuum conditions. A combination of scanning tunnelling microscopy (STM), high-resolution electron energy loss spectroscopy (HREELS), and density functional theory (DFT) calculations reveals that the overlayer consists of vertical benzannulated NHC moieties coordinating to Cu adatoms. Long-range order results from the placement of the two benzyl substituents on opposite sides of the benzimidazole moiety, with their aromatic rings approximately parallel to the surface. The organization of three surface-bound benzyl substituents from three different NHCs into a triangular array controls the formation of a highly ordered Kagome-like surface lattice. By comparison with earlier studies of NHCs on Cu(111), we show that the binding geometry and self-assembly of NHCDBZ are influenced by intermolecular and adsorbate-substrate interactions and facilitated by the flexibility of the methylene linkage between the N-heterocycle and the aromatic wingtip substituents.
RESUMEN
Selective aerobic oxidation of alcohols offers an attractive means to address challenges in the modern chemical industry, but the development of non-noble metal catalysts with superior efficacy for this reaction remains a grand challenge. Here, this study reports on such a catalyst based on atomically defined undercoordinated copper atoms over nitrogen-doped carbon support as an efficient, durable, and scalable heterogeneous catalyst for selective aerobic oxidation of alcohols. This catalyst exhibits extremely high intrinsic catalytic activity (TOF of 7692 h-1 ) in the oxidation of cinnamyl alcohol to afford cinnamaldehyde, along with exceptional recyclability (at least eight cycles), scalability, and broad substrate scope. DFT calculations suggest that the high activity derives from the low oxidation state and the unique coordination environment of the copper sites in the catalyst. These findings pave the way for the design of highly active and stable single atom catalysts to potentially address challenges in synthetic chemistry.
RESUMEN
Metal-support interactions are of great importance in determining the support-activity in heterogeneous catalysis. Here we report a low-temperature synthetic strategy to create atomically dispersed palladium atoms anchored on defective hexagonal boron nitride (h-BN) nanosheet. Density functional theory (DFT) calculations suggest that the nitrogen-containing B vacancy can provide stable anchoring sites for palladium atoms. The presence of single palladium atoms was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. This catalyst showed exceptional efficiency in chemoselective hydrogenation of cinnamaldehyde, along with excellent recyclability, sintering-resistant ability, and scalability. We anticipate this synthetic approach for the synthesis of high-quality SACs based on h-BN support is amenable to large-scale production of bench-stable catalysts with maximum atom efficiency for industrial applications.
RESUMEN
Single-atom catalysts (SACs) have great potential to revolutionize heterogeneous catalysis, enabling fast and direct construction of desired products. Given their notable promise, a general and scalable strategy to access these catalyst systems is highly desirable. Herein, we describe a straightforward and efficient thermal atomization strategy to create atomically dispersed palladium atoms anchored on a nitrogen-doped carbon shell over an SBA-15 support. Their presence was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The nitrogen-containing carbon shells provide atomic diffusion sites for anchoring palladium atoms emitted from palladium nanoparticles. This catalyst showed exceptional efficiency in selective hydrogenation of phenylacetylene and other types of alkynes. Importantly, it showed excellent stability, recyclability, and sintering-resistant ability. This approach can be scaled up with comparable catalytic activity. We anticipate that this work may lay the foundation for rapid access to high-quality SACs that are amenable to large-scale production for industrial applications.
RESUMEN
Single-atom catalysis represents a new frontier that integrates the merits of homogeneous and heterogeneous catalysis to afford exceptional atom efficiency, activity, and selectivity for a range of catalytic systems. Herein we describe a simple defect engineering strategy to construct an atomically dispersed palladium catalyst (Pdδ+, 0 < δ < 2) by anchoring the palladium atoms on oxygen vacancies created in CeO2 nanorods. This was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The as-prepared catalyst showed exceptional catalytic performance in the hydrogenation of styrene (99% conversion, TOF of 2410 h-1), cinnamaldehyde (99% conversion, 99% selectivity, TOF of 968 h-1), as well as oxidation of triethoxysilane (99% conversion, 79 selectivity, TOF of 10â¯000 h-1). This single-atom palladium catalyst can be reused at least five times with negligible activity decay. The palladium atoms retained their dispersion on the support at the atomic level after thermal stability testing in Ar at 773 K. Most importantly, this synthetic method can be scaled up while maintaining catalytic performance. We anticipate that this method will expedite access to single-atom catalysts with high activity and excellent resistance to sintering, significantly impacting the performance of this class of catalysts.
RESUMEN
Heterogeneous catalysts with atomically precise metal sites have enabled unique insight into structure-property relationships in materials science. Herein, we report the construction and selective hydrogenation performance of a single-atom palladium catalyst by confining the palladium atoms into the six-fold N-coordinating cavities of graphitic carbon nitride (g-C3N4) through a facile spatial confinement-reduction approach under mild reducing conditions. Spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurements confirm the presence of atomically dispersed palladium atoms stabilized by the g-C3N4 support. Its exceptional catalytic activity was demonstrated by the hydrogenation of styrene (98% conversion, 1.5 h) and furfural (conversion of 64% and selectivity of 99%, 4 h) and hydrodechlorination of 4-chlorophenol (99% conversion and 99% selectivity, 10 min). This palladium catalyst can be reused at least five times with negligible deterioration of its activity. Importantly, the palladium atoms retained their atomic dispersion following the thermal treatment. Moreover, this synthetic method can be scaled up while retaining similar catalytic activity. Fundamental insights are provided to elucidate how the material's structure significantly impacts the catalytic performance at the atomic scale.
RESUMEN
Benzimidazolium hydrogen carbonate salts have been shown to act as N-heterocyclic carbene precursors, which can remove oxide from copper oxide surfaces and functionalize the resulting metallic surfaces in a single pot. Both the surfaces and the etching products were fully characterized by spectroscopic methods. Analysis of surfaces before and after NHC treatment by X-ray photoelectron spectroscopy demonstrates the complete removal of copper(II) oxide. By using 13 C-labelling, we determined that the products of this transformation include a cyclic urea, a ring-opened formamide and a bis-carbene copper(I) complex. These results illustrate the potential of NHCs to functionalize a much broader class of metals, including those prone to oxidation, greatly facilitating the preparation of NHC-based films on metals other than gold.
RESUMEN
Magic-number gold nanoclusters are atomically precise nanomaterials that have enabled unprecedented insight into structure-property relationships in nanoscience. Thiolates are the most common ligand, binding to the cluster via a staple motif in which only central gold atoms are in the metallic state. The lack of other strongly bound ligands for nanoclusters with different bonding modes has been a significant limitation in the field. Here, we report a previously unknown ligand for gold(0) nanoclusters-N-heterocyclic carbenes (NHCs)-which feature a robust metal-carbon single bond and impart high stability to the corresponding gold cluster. The addition of a single NHC to gold nanoclusters results in significantly improved stability and catalytic properties in the electrocatalytic reduction of CO2. By varying the conditions, nature and number of equivalents of the NHC, predominantly or exclusively monosubstituted NHC-functionalized clusters result. Clusters can also be obtained with up to five NHCs, as a mixture of species.
RESUMEN
Sensor surfaces play a predominant role in the development of optical biosensor technologies for the analysis of biomolecular interactions. Thiol-based self-assembled monolayers (SAMs) on gold have been widely used as linker layers for sensor surfaces. However, the degradation of the thiol-gold bond can limit the performance and durability of such surfaces, directly impacting their performance and cost-effectiveness. To this end, a new family of materials based on N-heterocyclic carbenes (NHCs) has emerged as an alternative for surface modification, capable of self-assembling onto a gold surface with higher affinity and superior stability as compared to the thiol-based systems. Here we demonstrate three applications of NHC SAMs supporting a dextran layer as a tunable platform for developing various affinity-capture biosensor surfaces. We describe the development and testing of NHC-based dextran biosensor surfaces modified with each of streptavidin, nitrilotriacetic acid, and recombinant Protein A. These affinity-capture sensor surfaces enable oriented binding of ligands for optimal performance in biomolecular assays. Together, the intrinsic high stability and flexible design of the NHC biosensing platforms show great promise and open up exciting possibilities for future biosensing applications.
Asunto(s)
Técnicas Biosensibles , Dextranos , Oro , Metano/análogos & derivadosRESUMEN
Surface plasmon resonance (SPR)-based biosensing is a powerful tool to study the recognition processes between biomolecules in real-time without need for labels. The use of thiol chemistry is a critical component in surface functionalization of various SPR biosensor surfaces on gold. However, its use is hampered by the high propensity for oxidation of the gold-thiol linkage even in ambient atmosphere, resulting in a short lifetime of SPR sensor chips unless strict precautions are taken. Herein, we describe an approach to overcome this limitation by employing highly robust self-assembled monolayers (SAMs) of alkylated N-heterocyclic carbenes (NHCs) on gold. An alkylated NHC sensor surface was developed and its biosensing capabilities were compared to a commercial thiol-based analogue-a hydrophobic association (HPA) chip-in terms of its ability to act as a reliable platform for biospecific interaction analysis under a wide range of conditions. The NHC-based SPR sensor outperforms related thiol-based sesnsors in several aspects, including lower nonspecific binding capacity, better chemical stability, higher reproducibility, shorter equilibration time, and longer life span. We also demonstrate that the NHC-based sensor can be used for rapid and efficient formation of a hybrid lipid bilayer for use in membrane interaction studies. Overall, this work identifies the great promise in designing NHC-based surfaces as a new technology platform for SPR-based biosensing.
Asunto(s)
Metano/análogos & derivados , Técnicas Biosensibles , Oro , Metano/química , Reproducibilidad de los Resultados , Resonancia por Plasmón de SuperficieRESUMEN
Surface chemistry is a key enabler for various biosensing applications. Biosensors based on surface plasmon resonance routinely employ thiol-based chemistry for the linker layer between gold-coated support surfaces and functional biosensor surfaces. However, there is a growing awareness that such sensor surfaces are prone to oxidation/degradation problems in the presence of oxygen, and previous efforts to improve the stability have shown limited advancements. As an alternative, recent studies employing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) deposited on gold have shown significant promise in this area. Here, we describe a sensor surface employing an NHC SAM to couple a modified carboxymethylated dextran onto a gold surface. Such a dextran matrix is also used for affinity chromatography, and it is the most commonly employed matrix for commercial biosensor surfaces today. The performance reliability of the dextran-modified NHC chip to act as an alternative biosensing platform is compared with that of a thiol-based commercial chip in the proof-of-concept tests. The resultant NHC sensor surface shows a higher thermal stability compared to thiol analogues. Moreover, the plasma protein/drug and antibody/antigen interactions were validated on the NHC-based dextran chip and showed similar performance as compared to the thiol-based commercial chip. Ultimately, this study shows the strong potential applicability of chemical modifications to gold surfaces using NHC ligands for biosensing applications.
Asunto(s)
Dextranos/química , Técnicas Biosensibles , Oro , Metano/análogos & derivados , Reproducibilidad de los Resultados , Resonancia por Plasmón de SuperficieRESUMEN
Self-assembled monolayers of N-heterocyclic carbenes (NHCs) on copper are reported. The monolayer structure is highly dependent on the N,N-substituents on the NHC. On both Cu(111) and Au(111), bulky isopropyl substituents force the NHC to bind perpendicular to the metal surface while methyl- or ethyl-substituted NHCs lie flat. Temperature-programmed desorption studies show that the NHC binds to Cu(111) with a desorption energy of Edes =152±10â kJ mol-1 . NHCs that bind upright desorb cleanly, while flat-lying NHCs decompose leaving adsorbed organic residues. Scanning tunneling microscopy of methylated NHCs reveals arrays of covalently linked dimers which transform into adsorbed (NHC)2 Cu species by extraction of a copper atom from the surface after annealing.
RESUMEN
The characterization of nanometer-scale interactions between carbon-containing substrates and alumina surfaces is of paramount importance to industrial and academic catalysis applications, but it is also very challenging. Here, we demonstrate that dynamic nuclear polarization surface-enhanced NMR spectroscopy (DNP SENS) allows the unambiguous description of the coordination geometries and conformations of the substrates at the alumina surface through high-resolution measurements of 13C-27Al distances. We apply this new technique to elucidate the molecular-level geometry of 13C-enriched methionine and natural abundance poly(vinyl alcohol) adsorbed on γ-Al2O3-supported Pd catalysts, and we support these results with element-specific X-ray absorption near-edge measurements. This work clearly demonstrates a surprising bimodal coordination of methionine at the Pd-Al2O3 interface.
RESUMEN
The formation of organic films on gold employing N-heterocyclic carbenes (NHCs) has been previously shown to be a useful strategy for generating stable organic films. However, NHCs or NHC precursors typically require inert atmosphere and harsh conditions for their generation and use. Herein we describe the use of benzimidazolium hydrogen carbonates as bench stable solid precursors for the preparation of NHC films in solution or by vapour-phase deposition from the solid state. The ability to prepare these films by vapour-phase deposition permitted the analysis of the films by a variety of surface science techniques, resulting in the first measurement of NHC desorption energy (158±10 kJ mol(-1)) and confirmation that the NHC sits upright on the surface. The use of these films in surface plasmon resonance-type biosensing is described, where they provide specific advantages versus traditional thiol-based films.
RESUMEN
Since the first report of thiol-based self-assembled monolayers (SAMs) 30 years ago, these structures have been examined in a huge variety of applications. The oxidative and thermal instabilities of these systems are widely known, however, and are an impediment to their widespread commercial use. Here, we describe the generation of N-heterocyclic carbene (NHC)-based SAMs on gold that demonstrate considerably greater resistance to heat and chemical reagents than the thiol-based counterparts. This increased stability is related to the increased strength of the gold-carbon bond relative to that of a gold-sulfur bond, and to a different mode of bonding in the case of the carbene ligand. Once bound to gold, NHCs are not displaced by thiols or thioethers, and are stable to high temperatures, boiling water, organic solvents, pH extremes, electrochemical cycling above 0 V and 1% hydrogen peroxide. In particular, benzimidazole-derived carbenes provide films with the highest stabilities and evidence of short-range molecular ordering. Chemical derivatization can be employed to adjust the surface properties of NHC-based SAMs.