Nondissociative Activated Dihydrogen Binding on CeO2 Revealed by High-Pressure Operando Solid-State NMR Spectroscopy.

Dihydrogen complexes, which retain the H-H bond, have been extensively studied in molecular science and found to be prevalent in homogeneous and enzymatic catalysis. However, their counterparts in heterogeneous catalysis, specifically nondissociative chemisorbed dihydrogen binding on the catalyst surface, are rarely reported experimentally. This scarcity is due to the complexity of typical material surfaces and the lack of effective characterization techniques to prove and distinguish various dihydrogen binding modes. Herein, using high-pressure operando solid-state NMR technology, we report the first unambiguous experimental observation of activated dihydrogen binding on a reduced ceria catalyst through interactions with surface oxygen vacancies. By employing versatile NMR structural and dynamical analysis methods, we establish a proportional relationship between the degree of ceria surface reduction and dihydrogen binding, as evidenced by NMR observations of H-D through-bond coupling (JHD), T1 relaxation, and proton isotropic chemical shifts. In situ NMR analysis further reveals the participation of bound dihydrogen species in a room-temperature ethylene hydrogenation reaction. The remarkable similarities between surface-activated dihydrogen in heterogeneous catalysis and dihydrogen model molecular complexes can provide valuable insights into the hydrogenation mechanism for many other solid catalysts, potentially enhancing hydrogen utilization.

Elucidation of hemilabile-coordination-induced tunable regioselectivity in single-site Rh-catalyzed heterogeneous hydroformylation.

Revealing key factors that modulate the regioselectivity in heterogeneous hydroformylation requires identifying and monitoring the dynamic evolution of the truly active center under real reaction conditions. However, unambiguous in situ characterizations are still lacking. Herein, we elaborately construct a series of Rh-POPs catalysts for propylene hydroformylation which exhibited tunable regioselectivity. Multi-technique approaches reveal the unique microenvironment of the diverse HRh(CO)(PPh3-frame)2 sites with distinct P-Rh-P bite angles ranging from 90° to 120° and 158° to 168°, respectively. In situ time-resolved XAFS, FT-IR, and quasi-in situ Solid-state NMR experiments combined with DFT calculations explain the dynamic evolution of the electronic and coordinate state of the distinct active sites induced by hemilabile PPh3-frame ligands and further disclose the regulatory mechanism of regioselectivity. These state-of-the-art techniques and multiscale analysis advance the understanding of how hemilabile coordination influences regioselectivity and will provide a new thought to modulate the regioselectivity in future industrial processes.

Deciphering the Lithium-Ion Conduction Mechanism of LiH in Solid-Electrolyte Interphase.

Lithium hydride (LiH) has been widely recognized as the critical component of the solid-electrolyte interphase (SEI) in Li batteries. Although the formation mechanism and structural model of LiH in SEI have been extensively reported, the role in electro-performance of LiH in SEI is still ambiguous and has proven challenging to explored due to the complicated structure SEI and the lack of advanced in situ experimental technology. In this study, the isotopic exchange experiments combined with isotopic tracer experiments is applied to solidly illustrate the superior conductivity and Li+ conduction behavior of the LiH in natural SEI. Importantly, in situ transmission electron microscopy analysis is utilized to visualize the self-electrochemical decomposition of LiH, which is significantly distinctive from LiF and Li2O. The critical experimental evidence discovered by the work demonstrates ion transport behaviors of key components in the SEI, which is imperative for designing novel SEI and augurs a new area in optimizing the performance of lithium batteries.

Significant enhancement of proton conductivity in solid acid at the monolayer limit.

Proton transport in nanofluidic channels is not only fundamentally important but also essential for energy applications. Although various strategies have been developed to improve the concentration of active protons in the nanochannels, it remains challenging to achieve a proton conductivity higher than that of Nafion, the benchmark for proton conductors. Here, taking H3Sb3P2O14 and HSbP2O8 as examples, we show that the interactions between protons and the layer frameworks in layered solid acid HnMnZ2O3n+5 are substantially reduced at the monolayer limit, which significantly increases the number of active protons and consequently improves the proton conductivities by ∼8 ‒ 66 times depending on the humidity. The membranes assembled by monolayer H3Sb3P2O14 and HSbP2O8 nanosheets exhibit in-plane proton conductivities of ~ 1.02 and 1.18 S cm-1 at 100% relative humidity and 90 °C, respectively, which are over 5 times higher than the conductivity of Nafion. This work provides a general strategy for facilitating proton transport, which will have broad implications in advancing both nanofluidic research and device applications from energy storage and conversion to neuromorphic computing.

Precise Structural and Dynamical Details in Zeolites Revealed by Coupling-Edited 1H-17O Double Resonance NMR Spectroscopy.

Despite the extensive industrial and research interests in zeolites, their intrinsic catalytic nature is not fully understood due to the complexity of the hydroxyl-aluminum moieties. 17O NMR would provide irreplaceable opportunities for much-needed fine structural determination given the ubiquitous presence of oxygen atoms in nearly all species; however, the low sensitivity and quadrupolar nature of oxygen-17 make its NMR spectroscopic elucidation challenging. Here, we show that state-of-the-art double resonance solid-state NMR techniques have been combined with spectral editing methods based on scalar (through-bond) and dipolar (through-space) couplings, which allowed us to address the subtle protonic structures in zeolites. Notably, the often-neglected and undesired second-order quadrupolar-dipolar cross-term interaction ("2nd-QD interaction") can actually be exploited and can help gain invaluable information. Eventually, a comprehensive set of 1H-17O/1H-27Al double resonance NMR with J-/D-coupling spectral editing techniques have been designed in this work and enabled us to reveal atomic-scale precise structural and dynamical details in zeolites including: 1) The jump rate of the bridging acid site (BAS) proton is relatively low, i.e., far less than 100 s-1 at room temperature. 2) The Al-OH groups with 1H chemical shift at 2.6-2.8 ppm, at least for nonseverely dealuminated H-ZSM-5 catalysts, exhibit a rigid bridging environment similar to that of BAS. 3) The Si-OH groups at 2.0 ppm are not hydrogen bonded and undergo fast cone-rotational motion. The results in this study predict the 2nd-QD interaction to be universal for any rigid -17O-H environment, such as those in metal oxide surfaces or biomaterials.

Xylene Synthesis Through Tandem CO2 Hydrogenation and Toluene Methylation Over a Composite ZnZrO Zeolite Catalyst.

Selective synthesis of specific value-added aromatics from CO2 hydrogenation is of paramount interest for mitigating energy and climate problems caused by CO2 emission. Herein, we report a highly active composite catalyst of ZnZrO and HZSM-5 (ZZO/Z5-SG) for xylene synthesis from CO2 hydrogenation via a coupling reaction in the presence of toluene, achieving a xylene selectivity of 86.5 % with CO2 conversion of 10.5 %. A remarkably high space time yield of xylene could reach 215 mg gcat -1 h-1 , surpassing most reported catalysts for CO2 hydrogenation. The enhanced performance of ZZO/Z5-SG could be due to high dispersion and abundant oxygen vacancies of the ZZO component for CO2 adsorption, more feasible hydrogen activation and transfer due to the close interaction between the two components, and enhanced stability of the formate intermediate. The consumption of methoxy and methanol from the deep hydrogenation of formate by introduced toluene also propels an oriented conversion of CO2 .

Bistable Optoelectronic Properties Originated from the Scissoring Motion of the TEMPO Skeleton in Supramolecular Radical Ferroelectrics.

Bistable materials with multiphysical channels, such as optical, electrical, and magnetic properties, have been paid dramatic attention due to their alternativity of the signal status in electronic devices. Herein, three stable supramolecular radicals ([(NH3-TEMPO)(18-crown-6)][XF6] (1, X = P; 2, X = As; 3, X = Sb)) were synthesized and characterized. The former two molecules present ferroelectric phase transitions around 381.7 and 382.7 K, respectively, with bistability in dielectric property and second-harmonic generation (SHG) effect, which are first found in supramolecular radicals. Their ferroelectric transition and bistable properties are generated from a net polar crystal structure owing to the static ordered packing of NH3-TEMPO radical cations in the low-temperature phase (LTP) to a nonpolar structure owing to a distinctive symmetric scissoring motion of NH3-TEMPO radical cations between two 18-crown-6 molecules in the high-temperature phase (HTP). Both of them exhibit paramagnetic properties in HTP and LTP states since no intermolecular spin-spin interaction occurs due to the long distances among the radicals in their crystals. These results make us possible to design bistable optoelectronic radical materials with bistability in magnetic property in the future.

Solid-State Synthesis of Aluminophosphate Zeotypes by Calcination of Amorphous Precursors.

Because of the growing interest in the applications of zeolitic materials and the various challenges associated with traditional synthesis methods, the development of novel synthesis approaches remains of fundamental importance. Herein, we report a general route for the synthesis of aluminophosphate (AlPO) zeotypes by simple calcination of amorphous precursors at moderate temperatures (250-450 °C) for short reaction times (3-60 min). Accordingly, highly crystalline AlPO zeotypes with various topologies of AST, SOD, LTA, AEL, AFI, and -CLO, ranging from ultra-small to extra-large pores, have been successfully synthesized. Multinuclear multidimensional solid-state NMR techniques combined with complementary operando mass spectrometry (MS), powder X-ray diffraction, high-resolution transmission electron microscopy, and Raman characterizations reveal that covalently bonded fluoride in the intermediates catalyze the bond breaking and remaking processes. The confined organic structure-directing agents with high thermal stability direct the ordered rearrangement. This novel synthesis strategy not only shows excellent synthesis efficiency in terms of a simple synthesis procedure, a fast crystallization rate, and a high product yield, but also sheds new light on the crystallization mechanism of zeolitic materials.

Ultrafast Magic Angle Spinning Solid-State NMR Spectroscopy: Advances in Methodology and Applications.

Solid-state NMR spectroscopy is one of the most commonly used techniques to study the atomic-resolution structure and dynamics of various chemical, biological, material, and pharmaceutical systems spanning multiple forms, including crystalline, liquid crystalline, fibrous, and amorphous states. Despite the unique advantages of solid-state NMR spectroscopy, its poor spectral resolution and sensitivity have severely limited the scope of this technique. Fortunately, the recent developments in probe technology that mechanically rotate the sample fast (100 kHz and above) to obtain "solution-like" NMR spectra of solids with higher resolution and sensitivity have opened numerous avenues for the development of novel NMR techniques and their applications to study a plethora of solids including globular and membrane-associated proteins, self-assembled protein aggregates such as amyloid fibers, RNA, viral assemblies, polymorphic pharmaceuticals, metal-organic framework, bone materials, and inorganic materials. While the ultrafast-MAS continues to be developed, the minute sample quantity and radio frequency requirements, shorter recycle delays enabling fast data acquisition, the feasibility of employing proton detection, enhancement in proton spectral resolution and polarization transfer efficiency, and high sensitivity per unit sample are some of the remarkable benefits of the ultrafast-MAS technology as demonstrated by the reported studies in the literature. Although the very low sample volume and very high RF power could be limitations for some of the systems, the advantages have spurred solid-state NMR investigation into increasingly complex biological and material systems. As ultrafast-MAS NMR techniques are increasingly used in multidisciplinary research areas, further development of instrumentation, probes, and advanced methods are pursued in parallel to overcome the limitations and challenges for widespread applications. This review article is focused on providing timely comprehensive coverage of the major developments on instrumentation, theory, techniques, applications, limitations, and future scope of ultrafast-MAS technology.

Supercycled R-symmetry sequences for robust heteronuclear polarization transfer in solid-state NMR.

Herein, we introduce supercycle of R-symmetry sequences (SR-sequences) and incomplete supercycle schemes of R-symmetry sequences (iSR-I- and iSR-II-sequences) to improve the robustness of PRESTO for heteronuclear polarization transfer in MAS NMR. The constructions of SR- and iSR-I/II- sequences are based on the different phase-inverted supercycles of R-symmetry sequences, and such supercycles can suppress the influence of CSA, resonance offset and RF mismatch when incorporated into the PRESTO method. Moreover, the SR- and iSR-II-sequences are more efficient in suppressing the interference of homonuclear dipolar coupling. The improved robustness of SR-, iSR-I- and iSR-II-PRESTO over the original R-PRESTO has been verified by numerical simulations and NMR experiments on NH4H2PO4 and gamma-alumina at fast MAS conditions. It is also important to note that the SR- and iSR-II-PRESTO can greatly lengthen the transverse relaxation times and lead to much higher polarization transfer efficiency compared to R-PRESTO, thanks to their superior tolerance to RF inhomogeneity and homonuclear dipolar coupling.

Chemistry of Ketene Transformation to Gasoline Catalyzed by H-SAPO-11.

Although ketene has been proposed to be an active intermediate in a number of reactions including OXZEO (metal oxide-zeolite)-catalyzed syngas conversion, dimethyl ether carbonylation, methanol to hydrocarbons, and CO2 hydrogenation, its chemistry and reaction pathway over zeolites are not well understood. Herein, we study the pathway of ketene transformation to gasoline range hydrocarbons over the molecular sieve H-SAPO-11 by kinetic analysis, in situ infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. It is demonstrated that butene is the reaction intermediate on the paths toward gasoline products. Ketene transforms to butene on the acid sites via either acetyl species following an acetic acid ketonization pathway or acetoacetyl species with keto-enol tautomerism following an acetoacetic acid decarboxylation pathway when in the presence of water. This study reveals experimentally for the first time insights into ketene chemistry in zeolite catalysis.

Pseudo-resonance structures in chiral alcohols and amines and their possible aggregation states.

We now report that some chiral compounds, like alcohols, which are not sterically hindered atropisomers nor epimer mixtures, exhibit two sets of simultaneous NMR spectra in CDCl3. Some other chiral alcohols also simultaneously exhibit two different NMR spectra in the solid state because two different conformers, A and B had different sizes because their corresponding bond lengths and angles are different. These structures were confirmed in the same solid state by X-ray. We designate these as pseudo-resonance for a compound exhibiting several different corresponding lengths that simultaneously coexist in the solid state or liquid state. Variable-temperature NMR, 2D NMR methods, X-ray, neutron diffraction, IR, photo-luminesce (PL) and other methods were explored to study whether new aggregation states caused these heretofore unknown pseudo-resonance structures. Finally, eleven chiral alcohols or diols were found to co-exist in pseudo-resonance structures by X-ray crystallography in a search of the CDS database.

Direct Detection of Reactive Gallium-Hydride Species on the Ga2O3 Surface via Solid-State NMR Spectroscopy.

Surface metal hydrides (M-H) are ubiquitous in heterogeneous catalytic reactions, while the detailed characterizations are frequently hindered by their high reactivity/low concentration, and the complicated surface structures of the host solids, especially in terms of practical solid catalysts. Herein, combining instant quenching capture and advanced solid-state NMR methodology, we report the first direct and unambiguous NMR evidence on the highly reactive surface gallium hydrides (Ga-H) over a practical Ga2O3 catalyst during direct H2 activation. The spectroscopic effects of 69Ga and 71Ga isotopes on the 1H NMR signal are clearly differentiated and clarified, allowing a concrete discrimination of the Ga-H signal from the hydroxyl crowd. Accompanied with quantitative and two-dimensional NMR spectroscopical methods, as well as density functional theory calculations, information on the site specification, structural configuration, and formation mechanism of the Ga-H species has been revealed, along with the H2 dissociation mechanism. More importantly, the successful spectroscopic identification and isolation of the surface Ga-H allow us to clearly reveal the critical but ubiquitous intermediate role of this species in catalytic reactions, such as propane dehydrogenation and CO2 hydrogenation reactions. The analytic approach presented in this work can be extended to other M-H analysis, and the insights will benefit the design of more efficient Ga-based catalysts.

Multilevel Hollow Phenolic Resin Nanoreactors with Precise Metal Nanoparticles Spatial Location toward Promising Heterogeneous Hydrogenations.

Hollow nanostructures with fascinating properties have inspired numerous interests in broad research fields. Cell-mimicking complex hollow architectures with precise active components distributions are particularly important, while their synthesis remains highly challenging. Herein, a "top-down" chemical surgery strategy is introduced to engrave the 3-aminophenol formaldehyde resin (APF) spheres at nanoscale. Undergoing the cleavage of (Ar)CN bonds with ethanol as chemical scissors and subsequent repolymerization process, the Solid APF transform to multilevel hollow architecture with precise nanospatial distribution of organic functional groups (e.g., hydroxymethyl and amine). The transformation is tracked by electron microscopy and solid-state nuclear magnetic resonance techniques, the category and dosage of alcohol are pivotal for constructing multilevel hollow structures. Moreover, it is demonstrated the evolution of nanostructures accompanied with unique organic microenvironments is able to accurately confine multiple gold (Au) nanoparticles, leading to the formation of pomegranate-like particles. Through selectively depositing palladium (Pd) nanoparticles onto the outer shell, bimetallic Au@APF@Pd catalysts are formed, which exhibit excellent hydrogenation performance with turnover frequency (TOF) value up to 11257 h-1 . This work provides an effective method for precisely manipulating the nanostructure and composition of polymers at nanoscale and sheds light on the design of catalysts with precise spatial active components.

Elastic Lattice Enabling Reversible Tetrahedral Li Storage Sites in a High-Capacity Manganese Oxide Cathode.

The key to breaking through the capacity limitation imposed by intercalation chemistry lies in the ability to harness more active sites that can reversibly accommodate more ions (e.g., Li+ ) and electrons within a finite space. However, excessive Li-ion insertion into the Li layer of layered cathodes results in fast performance decay due to the huge lattice change and irreversible phase transformation. In this study, an ultrahigh reversible capacity is demonstrated by a layered oxide cathode purely based on manganese. Through a wealth of characterizations, it is clarified that the presence of low-content Li2 MnO3 domains not only reduces the amount of irreversible O loss; but also regulates Mn migration in LiMnO2 domains, enabling elastic lattice with high reversibility for tetrahedral sites Li-ion storage in Li layers. This work utilizes bulk cation disorder to create stable Li-ion-storage tetrahedral sites and an elastic lattice for layered materials, with a reversible capacity of 600 mA h g-1 , demonstrated in th range 0.6-4.9 V versus Li/Li+ at 10 mA g-1 . Admittedly, discharging to 0.6 V might be too low for practical use, but this exploration is still of great importance as it conceptually demonstrates the limit of Li-ions insertion into layered oxide materials.

Quantitatively Mapping the Distribution of Intrinsic Acid Sites in Mordenite Zeolite by High-Field 23Na Solid-State Nuclear Magnetic Resonance.

It is of great significance to accurately quantify the Brønsted acid sites (BASs) at different positions of mordenite (MOR) zeolite. However, H-MOR obtained from Na-MOR can hardly avoid dealumination under hydrothermal conditions, which causes difficulty in the acid characterization. Herein, 23Na-27Al D-HMQC was performed combined with high-field 23Na MQ MAS NMR and DFT calculation, which provided an unambiguous attribution of the 23Na chemical shifts and further helped to improve the resolution of 27Al MAS NMR. By fitting the 23Na and 1H MAS NMR spectra of Na/H-MOR, the intrinsic BAS contents in different T-sites were measured by characterizing the location and content of sodium ions. These Na/H-MOR zeolites with various acid distributions were used for DME carbonylation and showed that the amount of BASs in the T3 site was proportional to the activity of carbonylation. This study provides a new method for investigating the intrinsic acid properties of zeolites.

Nature of Five-Coordinated Al in γ-Al2O3 Revealed by Ultra-High-Field Solid-State NMR.

Five-coordinated Als (Al(V)) on the surface of aluminas play important roles when they are used as catalysts or catalyst supports. However, the comprehensive characterization and understanding of the intrinsic structural properties of the Al(V) remain a challenge, due to the very small amount in commonly used aluminas. Herein, the surface structures of γ-Al2O3 and Al(V)-rich Al2O3 nanosheets (Al2O3-NS) have been investigated and compared in detail by multinuclear high-field solid-state NMR. Thanks to the high resolution and sensitivity of ultra-high-field (up to 35.2 T) NMR, the arrangements of surface Als were clearly demonstrated, which are substantially different from the bulk phase in γ-Al2O3 due to the structure reconstruction. It reveals for the first time that most of the commonly observed Al(V)s tend to exist as aggregated states on the surface of γ-Al2O3, like those in amorphous Al2O3-NS liable to structure reconstruction. Our new insights into surface Al(V) species may help in understanding the structure-function relationship of alumina.

Bi/trinuclear Pt1,2Cu cluster assembly from isolated metal atoms.

We report a facile strategy for synthesizing uniform heterometallic bi/tri-atom clusters starting from mono-metallic atoms in the liquid phase. Specifically, Pt1,2Cu bi/tri-atoms are prepared by reducing CuCl2 at preformed Pt1 atoms with ethanol inside a PDMS-PEG protective layer. The metal atoms in the Pt1,2Cu clusters are in reduced chemical states.

77Se-13C based dipolar correlation experiments to map selenium sites in microcrystalline proteins.

Sulfur-containing sites in proteins are of great importance for both protein structure and function, including enzymatic catalysis, signaling pathways, and recognition of ligands and protein partners. Selenium-77 is an NMR active spin-1/2 nucleus that shares many physiochemical properties with sulfur and can be readily introduced into proteins at sulfur sites without significant perturbations to the protein structure. The sulfur-containing amino acid methionine is commonly found at protein-protein or protein-ligand binding sites. Its selenium-containing counterpart, selenomethionine, has a broad chemical shift dispersion useful for NMR-based studies of complex systems. Methods such as (1H)-77Se-13C double cross polarization or {77Se}-13C REDOR could be valuable to map the local environment around selenium sites in proteins but have not been demonstrated to date. In this work, we explore these dipolar transfer mechanisms for structural characterization of the GB1 V39SeM variant of the model protein GB1 and demonstrate that 77Se-13C based correlations can be used to map the local environment around selenium sites in proteins. We have found that the general detection limit is ~ 5 Å, but longer range distances up to ~ 7 Å can be observed as well. This study establishes a framework for the future characterization of selenium sites at protein-protein or protein-ligand binding interfaces.

Solid-State NMR Dipolar and Chemical Shift Anisotropy Recoupling Techniques for Structural and Dynamical Studies in Biological Systems.

With the development of NMR methodology and technology during the past decades, solid-state NMR (ssNMR) has become a particularly important tool for investigating structure and dynamics at atomic scale in biological systems, where the recoupling techniques play pivotal roles in modern high-resolution MAS NMR. In this review, following a brief introduction on the basic theory of recoupling in ssNMR, we highlight the recent advances in dipolar and chemical shift anisotropy recoupling methods, as well as their applications in structural determination and dynamical characterization at multiple time scales (i.e., fast-, intermediate-, and slow-motion). The performances of these prevalent recoupling techniques are compared and discussed in multiple aspects, together with the representative applications in biomolecules. Given the recent emerging advances in NMR technology, new challenges for recoupling methodology development and potential opportunities for biological systems are also discussed.