RESUMEN
Room-temperature sodium-sulfur (RT Na-S) batteries, noted for their low material costs and high energy density, are emerging as a promising alternative to lithium-ion batteries (LIBs) in various applications including power grids and standalone renewable energy systems. These batteries are commonly assembled with glass fiber membranes, which face significant challenges like the dissolution of polysulfides, sluggish sulfur conversion kinetics, and the growth of Na dendrites. Here, we develop an amorphous two-dimensional (2D) iron tin oxide (A-FeSnOx) nanosheet with hierarchical vacancies, including abundant oxygen vacancies (Ovs) and nano-sized perforations, that can be assembled into a multifunctional layer overlaying commercial separators for RT Na-S batteries. The Ovs offer strong adsorption and abundant catalytic sites for polysulfides, while the defect concentration is finely tuned to elucidate the polysulfides conversion mechanisms. The nano-sized perforations aid in regulating Na ions transport, resulting in uniform Na deposition. Moreover, the strategic addition of trace amounts of Ti3C2 (MXene) forms an amorphous/crystalline (A/C) interface that significantly improves the mechanical properties of the separator and suppresses dendrite growth. As a result, the task-specific layer achieves ultra-light (~0.1â mg cm-2), ultra-thin (~200â nm), and ultra-robust (modulus=4.9â GPa) characteristics. Consequently, the RT Na-S battery maintained a high capacity of 610.3â mAh g-1 and an average Coulombic efficiency of 99.9 % after 400â cycles at 0.5â C.
RESUMEN
Bio/ecoresorbable electronic systems create unique opportunities in implantable medical devices that serve a need over a finite time period and then disappear naturally to eliminate the need for extraction surgeries. A critical challenge in the development of this type of technology is in materials that can serve as thin, stable barriers to surrounding ground water or biofluids, yet ultimately dissolve completely to benign end products. This paper describes a class of inorganic material (silicon oxynitride, SiON) that can be formed in thin films by plasma-enhanced chemical vapor deposition for this purpose. In vitro studies suggest that SiON and its dissolution products are biocompatible, indicating the potential for its use in implantable devices. A facile process to fabricate flexible, wafer-scale multilayer films bypasses limitations associated with the mechanical fragility of inorganic thin films. Systematic computational, analytical, and experimental studies highlight the essential materials aspects. Demonstrations in wireless light-emitting diodes both in vitro and in vivo illustrate the practical use of these materials strategies. The ability to select degradation rates and water permeability through fine tuning of chemical compositions and thicknesses provides the opportunity to obtain a range of functional lifetimes to meet different application requirements.
Asunto(s)
Implantes Absorbibles , Electrónica , Agua/químicaRESUMEN
Graphene oxide (GO) and reduced GO possess robust mechanical, electrical and chemical properties. Their nanocomposites have been extensively explored for applications in diverse fields. However, due to the high flexibility and weak interlayer interactions of GO nanosheets, the flexural mechanical properties of GO-based composites, especially in bulk materials, are largely constrained, which hinders their performance in practical applications. Here, inspired by the amorphous/crystalline feature of the heterophase within nacreous platelets, we present a centimetre-sized, GO-based bulk material consisting of building blocks of GO and amorphous/crystalline leaf-like MnO2 hexagon nanosheets adhered together with polymer-based crosslinkers. These building blocks are stacked and hot-pressed with further crosslinking between the layers to form a GO/MnO2-based layered (GML) bulk material. The resultant GML bulk material exhibits a flexural strength of 231.2 MPa. Moreover, the material exhibits sufficient fracture toughness and strong impact resistance while being light in weight. Experimental and numerical analyses indicate that the ordered heterophase structure and synergetic crosslinking interactions across multiscale interfaces lead to the superior mechanical properties of the material. These results are expected to provide insights into the design of structural materials and potential applications of high-performance GO-based bulk materials in aerospace, biomedicine and electronics.
Asunto(s)
Grafito , Óxidos , Grafito/química , Compuestos de Manganeso , Óxidos/química , Polímeros/químicaRESUMEN
Aging has become an irreversible trend in the world, the health problems caused by aging cannot be ignored. The physiological functions of human body begin to decline with aging, the decline of gastrointestinal function caused by aging is an important problem that needs to be resolved. In this work, we evaluated the anti-aging effect of uridine in the senescent gastric epithelial cell model, and found that the aging level of gastric epithelial cell was significantly down-regulated by uridine treatment, uridine could obviously down-regulate the ratio of the SA-ß-gal-positive senescent cells. Furthermore, aging-related marker molecules (such as p16 and p21) were also significantly down-regulated under uridine treatment. Additionally, the levels of inflammation and oxidative stress were also significantly reduced by uridine treatment. Next, our further studies the effect of aging on FGF activity on gastric epithelial cell, and found that FGF/FGFR-mediated signaling pathways were significantly down-regulated. However, uridine treatment can not only alleviate the senescence of gastric epithelial cell, but also can partially restore the sensitivity of FGF signaling. Taken together, the current work indicates that uridine shows a good anti-aging effect, which lays a solid foundation for the related research in this filed.
Asunto(s)
Factores de Crecimiento de Fibroblastos , Transducción de Señal , Envejecimiento , Células Epiteliales , Factores de Crecimiento de Fibroblastos/farmacología , Humanos , Uridina/farmacologíaRESUMEN
Progress toward developing metal implants as permanent hard-tissue substitutes requires both osteointegration to achieve load-bearing support, and energy-dissipation to prevent overload-induced bone resorption. However, in existing implants these two properties can only be achieved separately. Optimized by natural evolution, tooth-periodontal-ligaments with fiber-bundle structures can efficiently orchestrate load-bearing and energy dissipation, which make tooth-bone complexes survive extremely high occlusion loads (>300 N) for prolonged lifetimes. Here, a bioinspired peri-implant ligament with simultaneously enhanced osteointegration and energy-dissipation is presented, which is based on the periodontium-mimetic architecture of a polymer-infiltrated, amorphous, titania nanotube array. The artificial ligament not only provides exceptional osteoinductivity owing to its nanotopography and beneficial ingredients, but also produces periodontium-similar energy dissipation due to the complexity of the force transmission modes and interface sliding. The ligament increases bone-implant contact by more than 18% and simultaneously reduces the effective stress transfer from implant to peri-implant bone by ≈30% as compared to titanium implants, which as far as is known has not previously been achieved. It is anticipated that the concept of an artificial ligament will open new possibilities for developing high-performance implanted materials with increased lifespans.
Asunto(s)
Materiales Biocompatibles/química , Implantes Dentales , Animales , Materiales Biocompatibles/farmacología , Diferenciación Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Módulo de Elasticidad , Análisis de Elementos Finitos , Masculino , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Nanotubos/química , Osteogénesis/efectos de los fármacos , Prótesis e Implantes , Ratas , Ratas Sprague-Dawley , Titanio/químicaRESUMEN
As a persistent pollutant, microplastics (MPs) have been reported to induce sperm quantity decrease in mice. However, the related mechanism remains obscure. Therefore, this study is intended to explore the effects of polystyrene microplastics (PS-MPs) on male reproduction and its related mechanism of blood-testis barrier (BTB) impairment. Thirty-two adult male Wistar rats were divided randomly into four groups fed with PS-MPs for 90 days at doses of 0 mg/day (control group), 0.015 mg/day, 0.15 mg/day, and 1.5 mg/day, respectively. The present results have shown that PS-MP exposure led to the damage of seminiferous tubule, resulted in apoptosis of spermatogenic cells, and decreased the motility and concentration of sperm, while the abnormality of sperm was elevated. Meanwhile, PS-MPs could induce oxidative stress and activate the p38 MAPK pathway and thus deplete the nuclear factor erythroid-2 related factor 2 (Nrf2). Noteworthily, PS-MPs led to the BTB-related protein expression decrease. All these results demonstrated that PS-MP exposure may lead to the destruction of BTB integrity and the apoptosis of spermatogenic cells through the activation of the MAPK-Nrf2 pathway. The current study provided novelty evidence for elucidating the effects of PS-MPs on male reproductive toxicity and its potential mechanism.
Asunto(s)
Microplásticos , Poliestirenos , Animales , Barrera Hematotesticular , Masculino , Ratones , Factor 2 Relacionado con NF-E2 , Plásticos , Ratas , Ratas Wistar , Transducción de SeñalRESUMEN
Microplastics (MPs) considered as a new persistent environmental pollutant could enter into the circulatory system and result in decrease of sperm quantity and quality in mice. However, the effects of Polystyrene MPs (PS MPs) on the ovary and its mechanism in rats remained unclear. In this present study, thirty-two healthy female Wistar rats were exposed to different concentrations of 0.5 µm PS MPs dispersed in deionized water for 90 days. Using hematoxylin-eosin (HE) staining, the number of growing follicles was decreased compared to the control group. In addition, the activity of glutathione peroxidase (GSH-Px), catalase (CAT) and superoxide dismutase (SOD) were decreased while the expression level of malondialdehyde (MDA) was increased in ovary tissue. Confirmed by immunohistochemistry, the integrated optical density of NLRP3 and Cleaved-Caspase-1 had been elevated by 13.9 and 14 in granulosa cells in the 1.5 mg/kg/d group. Furthermore, compared to the control group, the level of AMH had been decreased by 23.3 pg/ml while IL-1ß and IL-18 had been increased by 32 and 18.5 pg/ml in the 1.5 mg/kg/d group using the enzyme-linked immune sorbent assay (ELISA). Besides, the apoptosis of granulosa cells was elevated measured by terminal deoxyribonucleotide transferase-mediated nick end labeling (TUNEL) staining and flow cytometry. Moreover, western blot assays showed that the expressions of NLRP3/Caspase-1 signaling pathway related factors and Cleaved-Caspase-3 were increased. These results demonstrated that PS MPs could induce pyroptosis and apoptosis of ovarian granulosa cells via the NLRP3/Caspase-1 signaling pathway maybe triggered by oxidative stress. The present study suggested that exposure to microplastics had adverse effects on ovary and could be a potential risk factor for female infertility, which provided new insights into the toxicity of MPs on female reproduction.
Asunto(s)
Apoptosis/efectos de los fármacos , Caspasa 1/metabolismo , Microplásticos/toxicidad , Proteína con Dominio Pirina 3 de la Familia NLR/metabolismo , Ovario/efectos de los fármacos , Poliestirenos/toxicidad , Piroptosis/efectos de los fármacos , Animales , Femenino , Células de la Granulosa/efectos de los fármacos , Células de la Granulosa/metabolismo , Células de la Granulosa/patología , Interleucina-18/metabolismo , Interleucina-1beta/metabolismo , Malondialdehído/metabolismo , Ovario/metabolismo , Ovario/patología , Estrés Oxidativo/efectos de los fármacos , Ratas , Ratas Wistar , Transducción de SeñalRESUMEN
Increasing interest has recently been devoted to developing small, rapid, and portable electronic devices; thus, it is becoming critically important to provide matching light and flexible energy-storage systems to power them. To this end, compared with the inevitable drawbacks of being bulky, heavy, and rigid for traditional planar sandwiched structures, linear fiber-shaped lithium-ion batteries (LIB) have become increasingly important owing to their combined superiorities of miniaturization, adaptability, and weavability, the progress of which being heavily dependent on the development of new fiber-shaped electrodes. Here, we report a novel fiber battery electrode based on the most widely used LIB material, titanium oxide, which is processed into two-dimensional nanosheets and assembled into a macroscopic fiber by a scalable wet-spinning process. The titania sheets are regularly stacked and conformally hybridized in situ with reduced graphene oxide (rGO), thereby serving as efficient current collectors, which endows the novel fiber electrode with excellent integrated mechanical properties combined with superior battery performances in terms of linear densities, rate capabilities, and cyclic behaviors. The present study clearly demonstrates a new material-design paradigm toward novel fiber electrodes by assembling metal oxide nanosheets into an ordered macroscopic structure, which would represent the most-promising solution to advanced flexible energy-storage systems.
RESUMEN
A simple, general and fast method called "electrochemical shock" is developed to prepare monolayered transition-metal dichalcogenide (TMD) QDs with an average size of 2-4 nm and an average thickness of 0.85 ± 0.5 nm with only about 10 min of ultrasonication. Just like nails hammered into a plate, the electrochemical shock with Al3+ ions and the following extraction with the help of oleic acid can disintegrate bulk TMD crystals into ultrafine TMD QDs. The fast-prepared QDs are then applied to detect highly explosive molecules such as 2,4,6-trinitrophenol (TNP) with a low detection limit of 10-6 M. Our versatile method could be broadly applicable for the fast production of ultrathin QDs of other materials with great promise for various applications.
RESUMEN
The strong interest in macroscopic graphene and/or carbon nanotube (CNT) fiber has highlighted that anisotropic nanostructured materials are ideal components for fabricating fiber assemblies. Prospectively, employing two-dimensional (2D) crystals or nanosheets of functionality-rich transition metal oxides would notably enrich the general knowledge for desirable fiber constructions and more importantly would greatly broaden the scope of functionalities. However, the fibers obtained up to now have been limited to carbon-related materials, while those made of 2D crystals of metal oxides have not been achieved, probably due to the intrinsically low mechanical stiffness of a molecular sheet of metal oxides, which is only few hundredths of that for graphene. Here, using 2D titania sheets as an illustrating example, we present the first successful fabrication of macroscopic fiber of metal oxides composed of highly aligned stacking sheets with enhanced sheet-to-sheet binding interactions. Regardless of the intrinsically weak Ti-O bond in molecular titania sheets, the optimal fiber manifested mechanical performance comparable to that documented for graphene or CNTs. This work provided important hints for devising optimized architecture in macroscopic assemblies, and the rich functionalities of titania promises fibers with limitless promise for a wealth of innovative applications.
RESUMEN
Surface-enhanced Raman spectroscopy (SERS) represents a very powerful tool for the identification of molecular species, but unfortunately it has been essentially restricted to noble metal supports (Au, Ag and Cu). While the application of semiconductor materials as SERS substrate would enormously widen the range of uses for this technique, the detection sensitivity has been much inferior and the achievable SERS enhancement was rather limited, thereby greatly limiting the practical applications. Here we report the employment of non-stoichiometric tungsten oxide nanostructure, sea urchin-like W18O49 nanowire, as the substrate material, to magnify the substrate-analyte molecule interaction, leading to significant magnifications in Raman spectroscopic signature. The enrichment of surface oxygen vacancy could bring additional enhancements. The detection limit concentration was as low as 10(-7) M and the maximum enhancement factor was 3.4 × 10(5), in the rank of the highest sensitivity, to our best knowledge, among semiconducting materials, even comparable to noble metals without 'hot spots'.