Electrochemical reduction of N,N'-thiobisphthalimide and N,N'-dithiobisphthalimide: ejection of diatomic sulfur through an autocatalytic mechanism.

The electrochemical reduction of N,N'-dithiobisphthalimide and N,N'-thiobisphthalimide is investigated using electrochemical techniques and theoretical calculations. The results are rationalized using adequate electron transfer theories. The reduction leads to the ejection of diatomic sulfur and involves an interesting autocatalytic mechanism. This mechanism is dependent on the concentration of the initial compound and the cyclic voltammetric scan rate. The starting material is reduced both at the electrode and through homogeneous electron transfer from the produced sulfur. The initial electron transfer follows a stepwise mechanism involving the formation of the corresponding radical anion. This is supported by both the electrochemical data and the theoretical calculation results. The radical anion of the N,N'-dithiobisphthalimide dissociates through cleavage of the N-S chemical bond and not the S-S chemical bond. Application of the extension of the dissociative electron transfer theory to the dissociation of radical anions shows that the N-S chemical bond dissociates despite being stronger than the S-S chemical bond. This is due to the large difference in the oxidation potentials of the two potential anions (the phthalimidyl anion and the phthalimidyl thiyl anion). The electrochemical reduction of N,N'-thiobisphthalimide involves the intermediate formation of N,N'-dithiobisphthalimide and hence the autocatalytic process is less efficient.

The intriguing reaction of aromatic sulfonyl phthalimides with gold surfaces.

We report on a series of arene sulfonyl phthalimides which were prepared and used to modify polycrystalline gold and Au(111) gold surfaces. Three investigated compounds are the p-iodo-, the p-methoxy-, and the p-fluoro-benzenesulfonyl phthalimides. X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and scanning tunneling microscopy (STM) studies were used to characterize the modified surfaces. The XPS data show that all three investigated compounds decompose on gold surfaces. The decomposition leads to the adsorption of sulfur and ejection of the other groups except for the p-iodo compound, which also leads to the deposition of iodine. The cyclic voltammetry data confirm these results and show that high coverage values of deposited sulfur are obtained. High-resolution STM imaging showed a dynamic behaviour of sulfur on gold for all compounds. Movement of sulfur species on the Au(111) surface is observed. Various phases including a new 'zig-zag' pattern and a new 2 : 1 line pattern are presented. Sequential STM imaging also showed movement of one area of sulfur while another remains static. These results are important because (i) they provide direct experimental evidence that these hexavalent sulfur compounds react with gold surfaces breaking all sulfur chemical bonds, (ii) they show that sulfonyl phthalimides can be used as efficient precursors for the deposition of sulfur on gold, and (iii) very importantly they show the adlayer nature of the sulfur modified gold surface which has been a heavily debated question.

Rapid formation of a dense sulfur layer on gold through use of triphenylmethane sulfenyl chloride as a precursor.

The use of triphenylmethane sulfenyl chloride as a new precursor leads to the efficient deposition of sulfur on polycrystalline gold and Au(111) substrates. The modified surfaces are characterized using X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning tunneling microscopy (STM). The XPS data shows the rapid deposition of polymeric sulfur within very short times. Electrochemical stripping cyclic voltammetry (CV) confirms the rapid deposition and shows that high coverage values are achieved. STM imaging shows the formation of a wide range sulfur layer and production of the well-known etch pits. High-resolution STM images confirm the high density of the sulfur layers and show formation of a long-range phase consisting of rhombus structures close to the previously described rectangular structures along with other parallelograms and partial parallelograms. The present results do not show the initial formation of any organic self-assembled monolayer (SAM) indicating that the formation of polymeric sulfur does not result from the decomposition of an initial SAM as previously observed with alkyl and aryl thiolate-based SAMs. The suggested mechanism involves an initial reductive process similar to the one reported for thiocyanates and sulfenyl chlorides. This is followed by the dissociation of the Ph(3)C-S bond, leaving only sulfur on the surface, through a process leading to the recombination of the remaining fragments to yield triphenylmethyl chloride.

Nitro-substituted arene sulfenyl chlorides as precursors to the formation of aromatic SAMs.

The formation of aromatic SAMs on Au(111) using three nitro-substituted arene sulfenyl chlorides (4-nitrophenyl sulfenyl chloride (1), 2-nitrophenyl sulfenyl chloride (2), and 2,4-dinitrophenyl sulfenyl chloride (3)) is studied. The formation of SAMs and their quality are investigated as a function of the position of the nitro substituent(s) on the aromatic ring. The modified surfaces are characterized by X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), polarization modulation infrared reflection absorption spectroscopy (PMIRRAS), and cyclic voltammetry (CV). The results show that all three compounds are deposited on Au within very short times. The corresponding coverages are determined using CV. However, only compound 1 forms stable, long-range, well-ordered SAMs. The 4-nitrophenyl thiolate is adsorbed nearly vertically on the Au surface. Compounds 2 and 3 both form lower-quality SAMs where the adsorbed nitro-phenyl thiolates are more tilted. These SAMs are less stable than the ones obtained with the 4-nitrosubsituted precursor and decompose with time, leaving only sulfur on the gold surface.

Dissociation of aryl sulfonyl phthalimide radical anions: relevance to the biological activity of aryl sulfonyl amides.

The reduction of two aryl sulfonyl phthalimides leads to the corresponding radical anions. Surprisingly, that of the nitro-derivative decomposes faster than that of the methyl derivative. A theoretical investigation along with application of the dissociative ET theory to the decomposition of radical anions allows rationalization of this unexpected behavior.

New insights into sulfur deposition on gold using dithiobisphthalimide as a new precursor.

Dithiobisphthalimide is used as a new precursor for the spontaneous deposition of sulfur on gold surfaces in acetonitrile. Characterization of the modified surfaces is achieved using X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning tunneling microscopy (STM). The reported results indicate that the sulfur deposition is an efficient and fast process and that high coverages can be reached very quickly. Sequential high-resolution STM in air allows the direct observation, for the first time, of the mobility of the usually observed rectangular structures as individual units. It also shows the reversible association/dissociation of these rectangles. The nature of these structures is highly debated in the literature and the present work provides new insights into their nature through the use of a new sulfur precursor under non-traditional conditions. To explain our results we consider these structures as simple sulfur adlayers on the gold surface.

Application of the dissociative electron transfer theory and its extension to the case of in-cage interactions in the electrochemical reduction of arene sulfonyl chlorides.

Important aspects of the electrochemical reduction of a series of substituted arene sulfonyl chlorides are investigated. An interesting autocatalytic mechanism is encountered where the starting material is reduced both at the electrode and through homogeneous electron transfer from the resulting sulfinate anion. This is due to the homogenous electron transfer from the two-electron reduction produced anion (arene sulfinate) to the parent arene sulfonyl chloride. As a result, the reduction process and hence the generated final products depend on both the concentration of the substrate and the scan rate. A change is also observed in the reductive cleavage mechanism as a function of the substituent on the phenyl ring of the arene sulfonyl chloride. With 4-cyano and 4-nitrophenyl sulfonyl chlorides a "sticky" dissociative ET mechanism takes place where a concerted ET mechanism leads to the formation of a radical/anion cluster before decomposition. With other substituents (MeO, Me, H, Cl, and F) a "classical" dissociative ET is followed, where the ET and bond cleavage are simultaneous. The dissociative electron transfer theory, as well as its extension to the case of strong in-cage interactions between the produced fragments, along with gas phase chemical quantum calculations results helped us to rationalize both the observed change in the ET mechanism and the occurrence of the "sticky" dissociative ET mechanism. The radical/anion pair interactions have been determined both in solution as well as in the gas phase. The study also shows that despite the low magnitude of in-cage interactions in acetonitrile compared to the gas phase their existence strongly affects the dynamics of the involved reactions. It also shows that, as expected, these interactions are reinforced by the existence of strong electron-withdrawing substituents. The occurrence of an autocatalytic process and the existence of the radical/anion interaction may explain the differences previously observed in the reduction of these compounds in different media.

Physical structure of standing-up aromatic SAMs revealed by scanning tunneling microscopy.

Long-range-ordered aromatic SAMs are formed on Au(111) using 4-nitrophenyl sulfenyl chloride as a precursor. Although the main structure is a √3 × âˆš3 with a molecular density similar to that usually found for aliphatic SAMs, particular spots presenting specific shapes are also observed by STM. These include hexagons, partial hexagons, parallelograms, and zigzags resulting from specific arrangements of adsorbed molecules. These molecular arrangements are reversible as they form and dissociate or "vanish" in various areas on the surface. STM shows that these particular structures provide some order to their surrounding because areas void of these structures look less ordered. More interestingly, STM shows submolecular details of the molecules involved in forming these structures, hence providing direct experimental evidence for the ability of the STM to provide physical structure information of standing up SAMs. This is indeed a heavily debated question, and this work reports the first experimental example where submolecular physical structure is revealed by STM for standing-up SAMs.

Gold catalyzed reduction of a hexavalent aromatic sulfonyl phthalimide to sulfur.

The reduction of N-(p-fluorobenzenesulfonyl)phthalimide on polycrystalline gold and Au(111) was studied. Our key finding is the decomposition of the compound on the surface, leaving only sulfur behind. This was supported by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and scanning tunneling microscopy (STM). The modification leads to observation by STM of well-known as well as new phases for the S modified Au(111) surface.

Sulfur multilayer formation on Au(111): new insights from the study of hexamethyldisilathiane.

Hexamethyldisilathiane was successfully used as a new precursor for the formation of S layers on Au and to study their interaction. Characterization of the S modified gold surface was done by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and scanning tunneling microscopy (STM). Key findings include the direct observation by STM of (i) coexistence of different phases, (ii) multiple sulfur layers formation, (ii) formation of rectangular structures not only on the adlayer but also on the top layer, and (iv) rectangular structure mobility on different layers. These results provide clear evidence regarding the adsorbate nature of the rectangular structures, solving a highly debated question.

4-Nitrophenyl sulfenyl chloride as a new precursor for the formation of aromatic SAMs on gold surfaces.

4-Nitrophenyl sulfenyl chloride was used as a new precursor for the formation of densely packed aromatic SAMs on gold. The adsorption involves the reductive dissociation of the S-Cl bond. A well-ordered row structure corresponding to a √3 × 4 phase with a molecular area of 27.8 Å(2) is obtained.

Radical/Ion pair formation in the electrochemical reduction of arene sulfenyl chlorides.

Important aspects of the electrochemical reduction of a series of substituted arene sulfenyl chlorides are investigated. A striking change is observed in the reductive cleavage mechanism as a function of the substituent on the aryl ring of the arene sulfenyl chloride. With p-substituted phenyl chlorides a "sticky" dissociative ET mechanism takes place where a concerted ET mechanism leads to the formation of a radical/anion cluster before decomposition. With o-nitropheyl sulfenyl substituted chlorides a stepwise mechanism is observed where through space S...O interactions play an important role stabilizing both the neutral molecules and their reduced forms. Disulfides are generated through a nucleophilic reaction of the two-electron reduction produced anion (arenethiolate) on the parent molecule. The dissociative electron transfer theory, as well as its extension to the case of strong in-cage interactions between the produced fragments, along with the gas phase chemical quantum calculations results helped rationalize both the observed change in the ET mechanism and the occurrence of the "sticky dissociative" ET mechanism. The radical/anion pair interactions have been determined both in solution as well as in gas phase. This study shows that despite the low magnitude of in-cage interactions in acetonitrile as compared to in the gas phase, their existence strongly affects the kinetics of the involved reactions. It also shows that, as expected, these interactions are reinforced by the existence of strong electron-withdrawing substituents.

Regioselective bond cleavage in the dissociative electron transfer to benzyl thiocyanates: the role of radical/ion pair formation.

Important aspects of the electrochemical reduction of a series of substituted benzyl thiocyanates were investigated. A striking change in the reductive cleavage mechanism as a function of the substituent on the aryl ring of the benzyl thiocyanate was observed, and more importantly, a regioselective bond cleavage was encountered. A reductive alpha-cleavage (CH(2)-S bond) was seen for cyano and nitro-substituted benzyl thiocyanates leading to the formation of the corresponding nitro-substituted dibenzyls. With other substituents (CH(3)O, CH(3), H, Cl, and F), both the alpha (CH(2)-S) and the beta (S-CN) bonds could be cleaved as a result of an electrochemical reduction leading to the formation of the corresponding substituted monosulfides, disulfides, and toluenes. These final products are generated through either a protonation or a nucleophilic reaction of the two-electron reduction-produced anion on the parent molecule. The dissociative electron transfer theory and its extension to the formation/dissociation of radical anions, as well as its extension to the case of strong in-cage interactions between the produced fragments ("sticky" dissociative electron transfer (ET)), along with the theoretical calculation results helped rationalize (i) the observed change in the ET mechanism, (ii) the dissociation of the radical anion intermediates formed during the electrochemical reduction of the nitro-substituted benzyl thiocyanates, and more importantly (iii) the regioselective reductive bond cleavage.

The role of nonbonded sulfur-oxygen interaction in the dissociative electron transfer to nitro-substituted arenesulfenyl chlorides.

The electrochemical reduction of p-nitrophenyl sulfenyl chloride, o-nitrophenyl sulfenyl chloride as well as bis(4-nitrophenyl) disulfide and bis(2-dinitrophenyl) disulfide was investigated in acetonitrile at an inert electrode. Reduction standard potentials as well standard heterogeneous electron-transfer rate constants have been determined using convolution analysis. An unexpected big difference in the thermodynamics and kinetics of the initial electron-transfer process as well as a striking change in the reductive cleavage mechanism of the S-Cl bond as a function of the nitro group position on the aryl ring of the aryl sulfenyl chloride is observed. A computational study at the B3LYP level shows that this difference in behavior is due to the through-space nonbonded S...O interaction in the o-nitrophenyl sulfenyl chloride.

Regioselective bond cleavage in the dissociative electron transfer to benzyl thiocyanates.

The electrochemical reduction of benzyl thiocyanate and p-nitrobenzyl thiocyanate was investigated in acetonitrile at an inert electrode. These two compounds reveal a change in the reductive cleavage mechanism, and more interestingly, they show a clear-cut example of a regioselective bond dissociation. Both phenomena may be understood on the basis of the dissociative ET theory and its extension to the formation/dissociation reactions of radical ions. While the effect of the standard oxidation potential of the leaving group seems to be predominant in understanding the change in the ET mechanism by changing the driving force, the regioselective cleavage is dictated by changes in the intrinsic barrier related to the nature of the substituent on the aryl moiety.

A unique autocatalytic process and evidence for a concerted-stepwise mechanism transition in the dissociative electron-transfer reduction of aryl thiocyanates.

Electrochemical reduction of p-methyl-, p-methoxy-, and 3,5-dinitrophenyl thiocyanates as well as p-methyl- and p-methoxyphenyl disulfides was investigated in acetonitrile at an inert electrode. This series of compounds reveals a striking change in the reductive cleavage mechanism of the S-CN bond in thiocyanates as a function of the substituent on the aryl ring of the aryl thiocyanate. With nitro substituents, a stepwise mechanism, with an anion radical as the intermediate, takes place. When electron-donating groups (methyl and methoxy) are present, voltammetric as well as convolution analyses provide clear evidence for a transition between the concerted and stepwise mechanisms based on the magnitude of the transfer coefficient alpha. Moreover, a very interesting autocatalytic process is involved during the electrochemical reduction of these compounds. This process involves a nucleophilic substitution reaction on the initial aryl thiocyanate by the electrochemically generated arenethiolate ion. As a result of this unusual process, the electrochemical characteristics (peak potential and peak width) of the investigated series are concentration dependent.

Spectroscopic and calorimetric studies on the mechanism of methylenecyclopropane rearrangements triggered by photoinduced electron transfer.

2-(dideuteriomethylene)-1,1-bis(4-methoxyphenyl)cyclopropane (d(2)-1) undergoes degenerate rearrangement in both singlet- and triplet-sensitized electron-transfer photoreactions. Nanosecond time-resolved absorption spectroscopy on laser flash photolysis of the unlabeled 1 with 9,10-dicyanoanthracene, 1,2,4,5-tetracyanobenzene, or N-methylquinolinium tetrafluoroborate as an electron-accepting photosensitizer gives rise to two transients with lambda(max) at 500 and 350 nm assigned to the dianisyl-substituted largely twisted trimethylenemethane cation radical (6.+) and the corresponding diradical (6..), respectively. These intermediates are also detected, respectively, by steady state and nanosecond time-resolved EPR with chloranil or anthraquinone as a sensitizer. The degenerate rearrangement of d(2)-1 thus proceeds via these two different types of intermediates in a cation radical cleavage-diradical cyclization mechanism. Energetics based on nanosecond time-resolved photoacoustic calorimetry support this mechanism. A comparison of the reactivities and the spectroscopic results of 1, 1,1-bis(4-methoxyphenyl)-2-methylenespiro[2.2]pentane (2), and 1-cyclopropylidene-2,2-bis(4-methoxyphenyl)cyclopropane (3) suggest that the reversible methylenecyclopropane rearrangement between 2 and 3 proceeds via a similar mechanism.