Isolation and characterization of pure cultures for metabolizing 1,4-dioxane in oligotrophic environments.

1,4-Dioxane concentration in most contaminated water is much less than 1 mg/L, which cannot sustain the growth of most reported 1,4-dioxane-metabolizing pure cultures. These pure cultures were isolated following enrichment of mixed cultures at high concentrations (20 to 1,000 mg/L). This study is based on a different strategy: 1,4-dioxane-metabolizing mixed cultures were enriched by periodically spiking 1,4-dioxane at low concentrations (≤1 mg/L). Five 1,4-dioxane-metabolizing pure strains LCD6B, LCD6D, WC10G, WCD6H, and WD4H were isolated and characterized. The partial 16S rRNA gene sequencing showed that the five bacterial strains were related to Dokdonella sp. (98.3%), Acinetobacter sp. (99.0%), Afipia sp. (99.2%), Nitrobacter sp. (97.9%), and Pseudonocardia sp. (99.4%), respectively. Nitrobacter sp. WCD6H is the first reported 1,4-dioxane-metabolizing bacterium in the genus of Nitrobacter. The net specific growth rates of these five cultures are consistently higher than those reported in the literature at 1,4-dioxane concentrations <0.5 mg/L. Compared to the literature, our newly discovered strains have lower half-maximum-rate concentrations (1.8 to 8.2 mg-dioxane/L), lower maximum specific 1,4-dioxane utilization rates (0.24 to 0.47 mg-dioxane/(mg-protein ⋅ d)), higher biomass yields (0.29 to 0.38 mg-protein/mg-dioxane), and lower decay coefficients (0.01 to 0.02 d-1). These are characteristics of microorganisms living in oligotrophic environments.

Understanding Carbon Monoxide Binding and Interactions in M-MOF-74 (M = Mg, Mn, Ni, Zn).

Small molecules may adsorb strongly in metal-organic frameworks (MOFs) through interactions with under-coordinated open metal sites (OMS) that often exist within these structures. Among adsorbates, CO is attractive to study both for its relevance in energy-related applications and for its ability to engage in both σ-donation and π-backbonding interactions with the OMS in MOFs. Concomitant with strong adsorption, structural changes arise due to modifications of the electronic structure of both the adsorbate and adsorbent. These structural changes affect the separation performance of materials, and accurately capturing these changes and the resulting energetics is critical for accurate predictive modeling of adsorption. Traditional approaches to modeling using classical force fields typically do not capture or account for changes at the electronic level. To characterize the structural and energetic effects of the local structural changes, we employed density functional theory (DFT) to study CO adsorption in M-MOF-74s. M-MOF-74s feature OMS at which CO is known to adsorb strongly and can be synthesized with a variety of divalent metal cations with distinct performance in adsorption. We considered M-MOF-74s with a range of metals of varied d-band occupations (Mg (3d0), Mn (3d5), Ni (3d8), and Zn (3d10)) with various structural constraints ranging from geometrically constrained adsorbent and adsorbate ions to fully optimized geometries to deconvolute the relative contributions of various structural effects to the adsorption energetics and binding distances observed. Our data indicate that the most significant structural changes during adsorption correlate with the greatest π-backbonding behaviors and commensurately result in a sizable binding energy change observed for CO adsorption. The insights built from this work are relevant to two longstanding research challenges within the MOF community: rational design of materials for separations and the design of force fields capable of accurately modeling adsorption.

In†Operando Visualization of the Electrochemical Formation of Liquid Polybromide Microdroplets.

Zinc-bromine flow batteries are promising for stationary energy storage, and bromine-complexing agents have been used to form phase-separated liquid polybromide products. However, an understanding of the dynamics of polybromide nucleation is limited due to the beam sensitivity and complexity of polybromides. Here we report an in operando platform composed of dark-field light microscopy and a transparent electrochemical cell to reveal the dynamics of polybromide formation in their native environment. Using our platform, we confirm and reveal the liquid nature, chemical composition, pinning effect (strong interaction with Pt), residual effect (residual charge products on the surface), self-discharging, and over-oxidation of the polybromide products. The results provide insights into the role of complexing agents and guide the future design of zinc-bromine flow batteries. Furthermore, our in operando platform can potentially be used to study sensitive species and phases in other electrochemical reactions.

Acid Gas Adsorption on Metal-Organic Framework Nanosheets as a Model of an "All-Surface" Material.

To establish a model of metal-organic framework (MOF) surfaces and build an understanding of surface-specific ligand adsorption phenomena in MOFs, we present a computational study exploring multiple models of a series of MOF-2 nanosheet materials, "M-BDCs", with M = Zn, Cu, and Co and BDC = benzene-1,4-dicarboxylate. We study and assess the appropriateness of a series of models ranging from small clusters (18 atoms) to fully periodic sheet models. We additionally study the interactions of these models with acid gases and energy-relevant small molecules (CO, CO2, H2O, SO2, NO2, and H2S). We employ computational methods ranging from DFT with various exchange-correlation functionals to perturbative and coupled-cluster methods. For these systems, we present binding energies and enthalpies with the various ligands studied as well as IR frequency shifts for the normal modes of these ligands upon complexation with the open-metal sites of these materials. Our calculations lead to an understanding of phenomena unique to MOF surfaces and the importance of the periodicity in these materials in capturing surface-specific adsorption behaviors.

Reversible CO binding enables tunable CO/H2 and CO/N2 separations in metal-organic frameworks with exposed divalent metal cations.

Six metal-organic frameworks of the M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) structure type are demonstrated to bind carbon monoxide reversibly and at high capacity. Infrared spectra indicate that, upon coordination of CO to the divalent metal cations lining the pores within these frameworks, the C-O stretching frequency is blue-shifted, consistent with nonclassical metal-CO interactions. Structure determinations reveal M-CO distances ranging from 2.09(2) Å for M = Ni to 2.49(1) Å for M = Zn and M-C-O angles ranging from 161.2(7)° for M = Mg to 176.9(6)° for M = Fe. Electronic structure calculations employing density functional theory (DFT) resulted in good agreement with the trends apparent in the infrared spectra and crystal structures. These results represent the first crystallographically characterized magnesium and zinc carbonyl compounds and the first high-spin manganese(II), iron(II), cobalt(II), and nickel(II) carbonyl species. Adsorption isotherms indicate reversible adsorption, with capacities for the Fe, Co, and Ni frameworks approaching one CO per metal cation site at 1 bar, corresponding to loadings as high as 6.0 mmol/g and 157 cm(3)/cm(3). The six frameworks display (negative) isosteric heats of CO adsorption ranging from 52.7 to 27.2 kJ/mol along the series Ni > Co > Fe > Mg > Mn > Zn, following the Irving-Williams stability order. The reversible CO binding suggests that these frameworks may be of utility for the separation of CO from various industrial gas mixtures, including CO/H2 and CO/N2. Selectivities determined from gas adsorption isotherm data using ideal adsorbed solution theory (IAST) over a range of gas compositions at 1 bar and 298 K indicate that all six M2(dobdc) frameworks could potentially be used as solid adsorbents to replace current cryogenic distillation technologies, with the choice of M dictating adsorbent regeneration energy and the level of purity of the resulting gases.

Design of a metal-organic framework with enhanced back bonding for separation of N2 and CH4.

Gas separations with porous materials are economically important and provide a unique challenge to fundamental materials design, as adsorbent properties can be altered to achieve selective gas adsorption. Metal-organic frameworks represent a rapidly expanding new class of porous adsorbents with a large range of possibilities for designing materials with desired functionalities. Given the large number of possible framework structures, quantum mechanical computations can provide useful guidance in prioritizing the synthesis of the most useful materials for a given application. Here, we show that such calculations can predict a new metal-organic framework of potential utility for separation of dinitrogen from methane, a particularly challenging separation of critical value for utilizing natural gas. An open V(II) site incorporated into a metal-organic framework can provide a material with a considerably higher enthalpy of adsorption for dinitrogen than for methane, based on strong selective back bonding with the former but not the latter.