RESUMEN
The uniform deposition of perovskite light-emitting diodes (PeLEDs) and their integration with backplane thin-film transistors (TFTs) remain challenging for large-area display applications. Herein, an active-matrix PeLED display fabricated via the heterogeneous integration of cesium lead bromide LEDs and molybdenum disulfide (MoS2 )-based TFTs is presented. The single-source evaporation method enables the deposition of highly uniform perovskite thin films over large areas. PeLEDs are integrated with MoS2 TFTs to fabricate an active-matrix PeLED display with an 8 × 8 array, which exhibits excellent brightness control capability and high switching speed. This study demonstrates the potential of PeLEDs as candidates for next-generation displays and presents a novel approach for fabricating optoelectronic devices via the heterogeneous integration of 2D materials and perovskites, thereby paving the way toward the fabrication of practical future optoelectronic systems.
RESUMEN
Recent advances in two-dimensional semiconductors, particularly molybdenum disulfide (MoS2), have enabled the fabrication of flexible electronic devices with outstanding mechanical flexibility. Previous approaches typically involved the synthesis of MoS2 on a rigid substrate at a high temperature followed by the transfer to a flexible substrate onto which the device is fabricated. A recurring drawback with this methodology is the fact that flexible substrates have a lower melting temperature than the MoS2 growth process, and that the transfer process degrades the electronic properties of MoS2. Here we report a strategy for directly synthesizing high-quality and high-crystallinity MoS2 monolayers on polymers and ultrathin glass substrates (thickness ~30 µm) at ~150 °C using metal-organic chemical vapour deposition. By avoiding the transfer process, the MoS2 quality is preserved. On flexible field-effect transistors, we achieve a mobility of 9.1 cm2 V-1 s-1 and a positive threshold voltage of +5 V, which is essential for reducing device power consumption. Moreover, under bending conditions, our logic circuits exhibit stable operation while phototransistors can detect light over a wide range of wavelengths from 405 nm to 904 nm.
RESUMEN
Ultrathin crystalline silicon is widely used as an active material for high-performance, flexible, and stretchable electronics, from simple passive and active components to complex integrated circuits, due to its excellent electrical and mechanical properties. However, in contrast to conventional silicon wafer-based devices, ultrathin crystalline silicon-based electronics require an expensive and rather complicated fabrication process. Although silicon-on-insulator (SOI) wafers are commonly used to obtain a single layer of crystalline silicon, they are costly and difficult to process. Therefore, as an alternative to SOI wafers-based thin layers, here, a simple transfer method is proposed for printing ultrathin multiple crystalline silicon sheets with thicknesses between 300 nm to 13 µm and high areal density (>90%) from a single mother wafer. Theoretically, the silicon nano/micro membrane can be generated until the mother wafer is completely consumed. In addition, the electronic applications of silicon membranes are successfully demonstrated through the fabrication of a flexible solar cell and flexible NMOS transistor arrays.
RESUMEN
Large-scale growth of transition metal dichalcogenides and their subsequent integration with compound semiconductors is one of the major obstacles for two-dimensional materials implementation in optoelectronics applications such as active matrix displays or optical sensors. Here we present a novel transition metal dichalcogenide-on-compound-semiconductor fabrication method that is compatible with a batch microfabrication process. We show how a thin film of molybdenum disulfide (MoS2) can be directly synthesized on a gallium-nitride-based epitaxial wafer to form a thin film transistor array. Subsequently, the MoS2 thin film transistor was monolithically integrated with micro-light-emitting-diode (micro-LED) devices to produce an active matrix micro-LED display. In addition, we demonstrate a simple approach to obtain red and green colours through the printing of quantum dots on a blue micro-LED, which allows for the scalable fabrication of full-colour micro-LED displays. This strategy represents a promising route to attain heterogeneous integration, which is essential for high-performance optoelectronic systems that can incorporate the established semiconductor technology and emerging two-dimensional materials.
RESUMEN
Skin-mountable devices that can directly measure various biosignals and external stimuli and communicate the information to the users have been actively studied owing to increasing demand for wearable electronics and newer healthcare systems. Research on skin-mountable devices is mainly focused on those materials and mechanical design aspects that satisfy the device fabrication requirements on unusual substrates like skin and also for achieving good sensing capabilities and stable device operation in high-strain conditions. 2D materials that are atomically thin and possess unique electrical and optical properties offer several important features that can address the challenging needs in wearable, skin-mountable electronic devices. Herein, recent research progress on skin-mountable devices based on 2D materials that exhibit a variety of device functions including information input and output and in vitro and in vivo healthcare and diagnosis is reviewed. The challenges, potential solutions, and perspectives on trends for future work are also discussed.
Asunto(s)
Técnicas BiosensiblesRESUMEN
Electronic applications are continuously developing and taking new forms. Foldable, rollable, and wearable displays are applicable for human health care monitoring or robotics, and their operation relies on organic light-emitting diodes (OLEDs). Yet, the development of semiconducting materials with high mechanical flexibility has remained a challenge and restricted their use in unusual format electronics. This study presents a wearable full-color OLED display using a two-dimensional (2D) material-based backplane transistor. The 18-by-18 thin-film transistor array was fabricated on a thin MoS2 film that was transferred to Al2O3 (30 nm)/polyethylene terephthalate (6 µm). Red, green, and blue OLED pixels were deposited on the device surface. This 2D material offered excellent mechanical and electrical properties and proved to be capable of driving circuits for the control of OLED pixels. The ultrathin device substrate allowed for integration of the display on an unusual substrate, namely, a human hand.
RESUMEN
Stretchable alternating-current electroluminescent (ACEL) devices are required due to their potential in wearable, biomedical, e-skin, robotic, lighting, and display applications; however, one of the main hurdles is to achieve uniform electroluminescence with an optimal combination of transparency, conductivity, and stretchability in electrodes. We therefore propose a fabrication scheme involving strategically combining two-dimensional graphene layers with a silver nanowire (Ag NW)-embedded PEDOT:PSS film. The developed hybrid electrode overcomes the limitations of commonly known metallic NWs and ionic conductor-based electrodes for ACEL applications. Furthermore, the potential of the hybrid electrode is realized in demonstrating large-area stretchable ACEL devices composed of an 8 × 8 passive array. The prototype ACEL passive array demonstrates efficient and uniform electroluminescence under high levels of mechanical deformation such as bending, rolling, twisting, and stretching.