Minnelide exhibits antileukemic activity by targeting the Ars2/miR-190a-3p axis.

BACKGROUND: The identification of a novel and effective strategy for the clinical treatment of acute leukemia (AL) is a long-term goal. Minnelide, a water-soluble prodrug of triptolide, has recently been evaluated in phase I and II clinical trials in patients with multiple cancers and has shown promise as an antileukemic agent. However, the molecular mechanism underlying minnelide's antileukemic activity remains unclear. PURPOSE: To explore the molecular mechanisms by which minnelide exhibits antileukemic activity. METHODS: AL cells, primary human leukemia cells, and a xenograft mouse model were treated with triptolide and minnelide. The molecular mechanism was elucidated using western blotting, immunoprecipitation, flow cytometry, GSEA and liquid chromatography-mass spectrometry analysis. RESULTS: Minnelide was highly effective in inhibiting leukemogenesis and improving survival in two complementary AL mouse models. Triptolide, an active form of minnelide, causes cell cycle arrest in G1 phase and induces apoptosis in both human AL cell lines and primary AL cells. Mechanistically, we identified Ars2 as a new chemotherapeutic target of minnelide for AL treatment. We found that triptolide directly targeted Ars2, resulting in the downregulation of miR-190a-3p, which led to the disturbance of PTEN/Akt signaling and culminated in G1 cell cycle arrest and apoptosis. CONCLUSIONS: Our findings demonstrate that targeting Ars2/miR-190a-3p signaling using minnelide could represent a novel chemotherapeutic strategy for AL treatment and support the evaluation of minnelide for the treatment of AL in clinical trials.

Active-matrix digital microfluidics design for field programmable high-throughput digitalized liquid handling.

Digital liquid sample handling is an enabling tool for cutting-edge life-sciences research. We present here an active-matrix thin-film transistor (TFT) based digital microfluidics system, referred to as Field Programmable Droplet Array (FPDA). The system contains 256 × 256 pixels in an active area of 10.65 cm2, which can manipulate thousands of addressable liquid droplets simultaneously. By leveraging a novel TFT device and circuits design solution, we manage to programmatically manipulate droplets at single-pixel level. The minimum achievable droplet volume is around 0.5 nL, which is two orders of magnitude smaller than the smallest droplet ever reported on active-matrix digital microfluidics. The movement of droplets can be either pre-programmed or controlled in real-time. The FPDA system shows great potential of the ubiquitous thin-film electronics technology in digital liquid handling. These efforts will make it possible to create a true programmable lab-on-a-chip device to enable great advances in life science research.

Rapid and multi-target genotyping of Helicobacter pylori with digital microfluidics.

Helicobacter pylori (H. pylori) infection correlates closely with gastric diseases such as gastritis, ulcers, and cancer, influencing more than half of the world's population. Establishing a rapid, precise, and automated platform for H. pylori diagnosis is an urgent clinical need and would significantly benefit therapeutic intervention. Recombinase polymerase amplification (RPA)-CRISPR recently emerged as a promising molecular diagnostic assay due to its rapid detection capability, high specificity, and mild reaction conditions. In this work, we adapted the RPA-CRISPR assay on a digital microfluidics (DMF) system for automated H. pylori detection and genotyping. The system can achieve multi-target parallel detection of H. pylori nucleotide conservative genes (ureB) and virulence genes (cagA and vacA) across different samples within 30 min, exhibiting a detection limit of 10 copies/rxn and no false positives. We further conducted tests on 80 clinical saliva samples and compared the results with those derived from real-time quantitative polymerase chain reaction, demonstrating 100% diagnostic sensitivity and specificity for the RPA-CRISPR/DMF method. By automating the assay process on a single chip, the DMF system can significantly reduce the usage of reagents and samples, minimize the cross-contamination effect, and shorten the reaction time, with the additional benefit of losing the chance of experiment failure/inconsistency due to manual operations. The DMF system together with the RPA-CRISPR assay can be used for early detection and genotyping of H. pylori with high sensitivity and specificity, and has the potential to become a universal molecular diagnostic platform.

Boosted photo-immunotherapy via near-infrared light excited phototherapy in tumor sites and photo-activation in sentinel lymph nodes.

Phototherapy is a promising modality that could eradicate tumor and trigger immune responses via immunogenic cell death (ICD) to enhance anti-tumor immunity. However, due to the lack of deep-tissue-excitable phototherapeutic agents and appropriate excitation strategies, the utility of phototherapy for efficient activation of the immune system is challenging. Herein, we report functionalized ICG nanoparticles (NPs) with the capture capability of tumor-associated antigens (TAAs). Under near-infrared (NIR) light excitation, the ICG NPs exhibited high-performance phototherapy, i.e., synergistic photothermal therapy and photodynamic therapy, thereby efficiently eradicating primary solid tumor and inducing ICD and subsequently releasing TAAs. The ICG NPs also captured TAAs and delivered them to sentinel lymph nodes, and then the sentinel lymph nodes were activated with NIR light to trigger efficient T-cell immune responses through activation of dendritic cells with the assistance of ICG NP generated reactive oxygen species, inhibiting residual primary tumor recurrence and controlling distant tumor growth. The strategy of NIR light excited phototherapy in tumor sites and photo-activation in sentinel lymph nodes provides a powerful platform for active immune systems for anti-tumor photo-immunotherapy.

AIEgens-enhanced rapid sensitive immunofluorescent assay for SARS-CoV-2 with digital microfluidics.

BACKGROUND: Sensitive and rapid antigen detection is critical for the diagnosis and treatment of infectious diseases, but conventional ELISAs including chemiluminescence-based assays are limited in sensitivity and require many operation steps. Fluorescence immunoassays are fast and convenient but often show limited sensitivity and dynamic range. RESULTS: To address the need, an aggregation-induced emission fluorgens (AIEgens) enhanced immunofluorescent assay with beads-based quantification on the digital microfluidic (DMF) platform was developed. Portable DMF devices and chips with small electrodes were fabricated, capable of manipulating droplets within 100 nL and boosting the reaction efficiency. AIEgen nanoparticles (NPs) with high fluorescence and photostability were synthesized to enhance the test sensitivity and detection range. The integration of AIEgen probes, transparent DMF chip design, and the large magnetic beads (10 µm) as capture agents enabled rapid and direct image-taking and signal calculation of the test result. The performance of this platform was demonstrated by point-of-care quantification of SARS-CoV-2 nucleocapsid (N) protein. Within 25 min, a limit of detection of 5.08 pg mL-1 and a limit of quantification of 8.91 pg mL-1 can be achieved using <1 µL sample. The system showed high reproducibility across the wide dynamic range (10-105 pg mL-1), with the coefficient of variance ranging from 2.6% to 9.8%. SIGNIFICANCE: This rapid, sensitive AIEgens-enhanced immunofluorescent assay on the DMF platform showed simplified reaction steps and improved performance, providing insight into the small-volume point-of-care testing of different biomarkers in research and clinical applications.

Open Thermal Control System for Stable Polymerase Chain Reaction on a Digital Microfluidic Chip.

In this paper, a digital microfluidic thermal control system was introduced for the stable polymerase chain reaction (PCR). The system consists of a thermoelectric cooler unit, a thermal control board, and graphical-user-interface software capable of simultaneously achieving temperature control and on-chip droplet observation. A fuzzy proportional-integral-derivative (PID) method was developed for this system. The simulation analysis was performed to evaluate the temperature of different reagents within the chip. Based on the results, applying fuzzy PID control for PCR will enhance the thermal stability by 67.8% and save the time by 1195 s, demonstrating excellent dynamic response capability and thermal robustness. The experimental results are consistent with the simulation results on the planar temperature distribution, with a data consistency rate of over 99%. The PCR validation was carried out on this system, successfully amplifying the rat GAPDH gene at a concentration of 193 copies/µL. This work has the potential to be useful in numerous existing lab-on-a-chip applications.

Arenobufagin inhibits lung metastasis of colorectal cancer by targeting c-MYC/Nrf2 axis.

BACKGROUND: Colorectal cancer (CRC) is one of the commonest cancers worldwide. Metastasis is the most common cause of death in patients with CRC. Arenobufagin is an active component of bufadienolides, extracted from toad skin and parotid venom. Arenobufagin reportedly inhibits epithelial-to-mesenchymal transition (EMT) and metastasis in various cancers. However, the mechanism through which arenobufagin inhibits CRC metastasis remains unclear. PURPOSE: This study aimed to elucidate the molecular mechanisms by which arenobufagin inhibits CRC metastasis. METHODS: Wound-healing and transwell assays were used to assess the migration and invasion of CRC cells. The expression of nuclear factor erythroid-2-related factor 2 (Nrf2) in the CRC tissues was assessed using immunohistochemistry. The protein expression levels of c-MYC and Nrf2 were detected by immunoblotting. A mouse model of lung metastasis was used to study the effects of arenobufagin on CRC lung metastasis in vivo. RESULTS: Arenobufagin observably inhibited the migration and invasion of CRC cells by downregulating c-MYC and inactivating the Nrf2 signaling pathway. Pretreatment with the Nrf2 inhibitor brusatol markedly enhanced arenobufagin-mediated inhibition of migration and invasion, whereas pretreatment with the Nrf2 agonist tert­butylhydroquinone significantly attenuated arenobufagin-mediated inhibition of migration and invasion of CRC cells. Furthermore, Nrf2 knockdown with short hairpin RNA enhanced the arenobufagin-induced inhibition of the migration and invasion of CRC cells. Importantly, c-MYC acts as an upstream modulator of Nrf2 in CRC cells. c-MYC knockdown markedly enhanced arenobufagin-mediated inhibition of the Nrf2 signaling pathway, cell migration, and invasion. Arenobufagin inhibited CRC lung metastasis in vivo. Together, these findings provide evidence that interruption of the c-MYC/Nrf2 signaling pathway is crucial for arenobufagin-inhibited cell metastasis in CRC. CONCLUSIONS: Collectively, our findings show that arenobufagin could be used as a potential anticancer agent against CRC metastasis. The arenobufagin-targeted c-MYC/Nrf2 signaling pathway may be a novel chemotherapeutic strategy for treating CRC.

Polar coordinate active-matrix digital microfluidics for high-resolution concentration gradient generation.

Automated concentration gradient generation is one of the most important applications of lab-on-a-chip devices. Digital microfluidics is a unique platform that can effectively achieve digitalized gradient concentration preparation. However, the dynamic range and concentration resolution of the prepared samples heavily rely on the size and the number of effective electrodes. In this work, we report an active-matrix digital microfluidic device with polar coordinate electrode arrangement. The device contains 33 different electrode sizes, generating digital droplets of different volumes. To compare with the conventional rectangular coordinate arrangement with a similar electrode number, this work shows an approximately 19 times resolution enhancement for the achievable concentration gradient. We characterized the stability and uniformity of droplets generated by electrodes of different sizes, and the coefficient of variation of stable droplets was less than 3%. The fluorescent nanomaterial's concentration quantification and glucose concentration characterization experiments were also conducted, and the correlation coefficients for the linearities were all above 0.99.

Isolation and characterization of distinctive pyrene-degrading bacteria from an uncontaminated soil.

Considerable efforts that isolate and characterize degrading bacteria for polycyclic aromatic hydrocarbons (PAHs) have focused on contaminated environments so far. Here we isolated three distinctive pyrene (PYR)-degrading bacteria from a paddy soil that was not contaminated with PAHs. These included a novel Bacillus sp. PyB-9 and efficient degraders, Shigella sp. PyB-6 and Agromyces sp. PyB-10. All three strains could utilize naphthalene, phenanthrene, anthracene, fluoranthene and PYR as sole carbon sources, and degraded PYR in a range of temperatures (27-37 °C) and pH (5-8). Strains PyB-6 and PyB-10 almost completely degraded 50 mg L-1 PYR within 15 days, and 75.5% and 98.9% of 100 mg L-1 PYR in 27 days, respectively. The kinetics of PYR biodegradation was well represented by the Gompertz model. Ten and twelve PYR metabolites were identified in PYR degradation process by strains PyB-6 and PyB-10, respectively. Chemical analyses demonstrated that the degradation mechanisms of PYR were the same for strains PyB-6 and PyB-10 with initial dioxygenation mainly on C-4,5 positions of PYR. The degradation of 4,5-phenanthrenedicarboxylic acid was branched to 4-phenanthrenecarboxylic acid pathway and 5-hydroxy-4-phenanthrenecarboxylic acid pathway, both of which played important roles in PYR degradation by strains PyB-6 and PyB-10. To our knowledge, Shigella sp. and Agromyces sp. were found for the first time to possess the capability for PAHs degradation. These findings contributed to upgrading the bank of microbial resource and knowledge on PAH biodegradation.

Oxidative Dissolution of Sulfide Minerals Tends to Accumulate More Dissolved Heavy Metals in Deep Seawater Environments than in Shallow Seawater Environments.

Deep-sea mining magnifies the release of heavy metals into seawater through oxidative dissolution of seafloor massive sulfide (SMS). At present, there is little information about how the metals released into seawater might be affected by the mineral assemblages, seawater conditions, and solid percentages. Here, leaching experiments were carried out to examine the behavior of three sulfides from the Southwest Indian Ridge, under conditions that replicated deep and shallow seawater environments at three solid-liquid ratios. The results demonstrated that sphalerite dissolved rapidly, and the metals released in both experimental conditions were comparable, potentially reflecting galvanic interactions between the sulfide minerals. Large quantities of the released metals were removed from the solutions when hydrous ferric oxides formed, especially for shallow seawater conditions. A comparison of metal concentrations in the leachates with the baseline metal concentrations in natural seawater indicated that most of the released metals, when diluted with seawater, would not have widespread impacts on ecosystems. Based on the obtained unique oxidative dissolution properties of each SMS at variable solid-liquid ratios, targeted wastewater discharge treatments are proposed to minimize impacts from the dissolved metals. This study will support the development of robust guidelines for deep-sea mining activities.

Advanced design and applications of digital microfluidics in biomedical fields: An update of recent progress.

Significant breakthroughs have been made in digital microfluidic (DMF)-based technologies over the past decades. DMF technology has attracted great interest in bioassays depending on automatic microscale liquid manipulations and complicated multi-step processing. In this review, the recent advances of DMF platforms in the biomedical field were summarized, focusing on the integrated design and applications of the DMF system. Firstly, the electrowetting-on-dielectric principle, fabrication of DMF chips, and commercialization of the DMF system were elaborated. Then, the updated droplets and magnetic beads manipulation strategies with DMF were explored. DMF-based biomedical applications were comprehensively discussed, including automated sample preparation strategies, immunoassays, molecular diagnosis, blood processing/testing, and microbe analysis. Emerging applications such as enzyme activity assessment and DNA storage were also explored. The performance of each bioassay was compared and discussed, providing insight into the novel design and applications of the DMF technology. Finally, the advantages, challenges, and future trends of DMF systems were systematically summarized, demonstrating new perspectives on the extensive applications of DMF in basic research and commercialization.

Enhanced absorbance detection system for online bacterial monitoring in digital microfluidics.

We report a fully integrated digital microfluidic absorbance detection system with an enhanced sensitivity for online bacterial monitoring. Through a 100 µm gap in the chip, our optical detection system has a detection sensitivity for a BCA protein concentration of 0.1 mg mL-1. The absorbance detection limit of our system is 1.4 × 10-3 OD units, which is one order of magnitude better than that of the existing studies. The system's linear region is 0.1-7 mg mL-1, and the dynamic range is 0-25 mg mL-1. We measured the growth curves of wild-type and E. coli transformed with resistance plasmids and mixed at different ratios on chip. We sorted out the bacterial species including highly viable single cells based on the difference in absorbance data of growth curves. We explored the changes in the growth curves of E. coli under different concentrations of resistant media. In addition, we successfully screened for the optimal growth environment of the bacteria, in which the growth rate of PET30a-DH5α (in a medium with 33 µg mL-1 kanamycin resistance) was significantly higher than that of a 1 mg mL-1 resistance medium. In conclusion, the enhanced digital microfluidic absorbance detection system exhibits exceptional sensitivity, enabling precise bacterial monitoring and growth curve analysis, while also laying the foundation for DMF-based automated bioresearch platforms, thus advancing research in the life sciences.

Daucosterol confers protection against T-2 toxin induced blood-brain barrier toxicity through the PGC-1α-mediated defensive response in vitro and in vivo.

T-2 toxin is a common environmental pollutant and contaminant in food and animal feed that represents a great challenge to human and animal' health throughout the world. Using natural compounds to prevent the detrimental effects of T-2 toxin represents an attractive strategy. Peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α) is a critical regulator in various cellular processes. Recently, PGC-1α activation has been reported to confer protection against neurological injuries. We aimed to identify a potent PGC-1α activator from plants as a chemopreventive compound and to demonstrate the efficacy of the compound in attenuating T-2 toxin-induced blood-brain barrier (BBB) toxicity. We identified daucosterol, which binds directly to the 71-74 (-1100 to -1000 bp) position of the second promoter of human PGC-1α by hydrogen bonding. An in vitro and in vivo T-2 toxin induced BBB injury model revealed that this compound can protect against this injury by increasing transepithelial/transendothelial electrical resistance, reducing sodium fluorescein (NaF) infiltration and increasing the expression of tight junction-related proteins (zonula occludens-1 (ZO-1), occludin (OCLN), claudin-5 (CLDN5)) expression. In conclusion, we identified daucosterol as representing a novel of PGC-1α activators and illustrated the mechanism of specific binding site. Furthermore, we have demonstrated the feasibility of using natural compounds targeting PGC-1α as a therapeutic approach to protect humans from environmental insults that may occur daily such as lipopolysaccharide.

Large-Area Electronics-Enabled High-Resolution Digital Microfluidics for Parallel Single-Cell Manipulation.

Large-area electronics as switching elements are an ideal option for electrode-array-based digital microfluidics. With support of highly scalable thin-film semiconductor technology, high-resolution digital droplets (diameter around 100 µm) containing single-cell samples can be manipulated freely on a two-dimensional plane with programmable addressing logic. In addition, single-cell generation and manipulation as foundations for single-cell research demand ease of operation, multifunctionality, and accurate tools. In this work, we reported an active-matrix digital microfluidic platform for single-cell generation and manipulation. The active device contained 26,368 electrodes that could be independently addressed to perform parallel and simultaneous droplet generation and achieved single-cell manipulation. We demonstrate a high-resolution digital droplet generation with a droplet volume limit of 500 pL and show the continuous and stable movement of droplet-contained cells for over 1 h. Furthermore, the success rate of single droplet formation was higher than 98%, generating tens of single cells within 10 s. In addition, a pristine single-cell generation rate of 29% was achieved without further selection procedures, and the droplets containing single cells could then be tested for on-chip cell culturing. After 20 h of culturing, about 12.5% of the single cells showed cell proliferation.

Synthesis and Spectroscopic Properties of Selenophene[3, 2-b]-Fused BODIPYs.

Fusion selenophene endows the chromophore with more intrinsic and special functions. Herein, nonsymmetric selenophene-fused BODIPYs were designed and synthesized starting from the selenophene unit. The fused ring of selenophene not only maintains the rigid structure of BODIPY but also further modulates its spectral properties. The newly prepared dyes possessed many promising properties including large molar extinction coefficients, low fluorescence quantum yields, and moderate singlet oxygen generation. Quantum calculations affirmed that the smaller singlet-triplet energy gap and larger spin-orbit coupling cause efficient intersystem crossing, thus enhancing the singlet oxygen generation yield. Furthermore, selenophene-fused BODIPY exhibited significant phototoxicity with negligible dark cytotoxicity, based on the fluorescence imaging of the reactive oxygen species detection experiment.

Correction: Zhang et al. Genome-Scale CRISPR Knockout Screening Identifies BACH1 as a Key Regulator of Aflatoxin B1-Induced Oxidative Damage. Antioxidants 2022, 11, 1787.

In the original publication [...].

The latitudinal and longitudinal allelopathic patterns of an invasive alligator weed (Alternanthera philoxeroides) in China.

Allelopathy has been considered a good explanation for the successful invasion of some invasive plants. However, the real latitudinal and longitudinal allelopathic effects on native species have rarely been documented since many exotics have spread widely. We conducted a Petri dish experiment to determine the latitudinal and longitudinal allelopathic patterns of an invasive alligator weed (Alternanthera philoxeroides) on a common crop (Lactuca sativa) in China, and find what determines the allelopathic intensity. The results showed that the allelopathic effects of A. philoxeroides increased with the latitude while decreased with the longitude. This indicated that A. philoxeroides used its allelopathy to gain competitive advantages more in its recent invaded communities than that in its early invaded ones as A. philoxeroides is expanding from southeast China to northwest China. Furthermore, we found that the allelopathic intensity of A. philoxeroide was negatively correlated to the leaf contents of soluble carbohydrate (SC), carbon (C) and nitrogen (N), but that was positively correlated to the leaf contents of soluble protein (SP), free amino acids (FAA), plant polyphenol (PP), phosphorus (P) and potassium (K). These results suggested that the allelopathic intensity of A. philoxeroide was more determined by the limited P and K nutrients as well as the intermediate allelochemicals (SP, FAA, PP) rather than the unlimited C, N and SC. Thus, we can speculate that the negative or positive effects of plant aqueous extracts are a function of not only the extract concentrations but also the trade-offs between inhibition and promotion of all components in the extracts. Then we could reduce the allelopathic effects of A. philoxeroide by controlling the component contents in the plant tissues, by fertilization or other managements, especially in the plant recent invaded communities.

Dihydrochalcones in Sweet Tea: Biosynthesis, Distribution and Neuroprotection Function.

Sweet tea is a popular herbal drink in southwest China, and it is usually made from the shoots and tender leaves of Lithocarpus litseifolius. The sweet taste is mainly attributed to its high concentration of dihydrochalcones. The distribution and biosynthesis of dihydrochaldones in sweet tea, as well as neuroprotective effects in vitro and in vivo tests, are reviewed in this paper. Dihydrochalones are mainly composed of phloretin and its glycosides, namely, trilobatin and phloridzin, and enriched in tender leaves with significant geographical specificity. Biosynthesis of the dihydrochalones follows part of the phenylpropanoid and a branch of flavonoid metabolic pathways and is regulated by expression of the genes, including phenylalanine ammonia-lyase, 4-coumarate: coenzyme A ligase, trans-cinnamic acid-4-hydroxylase and hydroxycinnamoyl-CoA double bond reductase. The dihydrochalones have been proven to exert a significant neuroprotective effect through their regulation against Aß deposition, tau protein hyperphosphorylation, oxidative stress, inflammation and apoptosis.

Genome-Scale CRISPR Knockout Screening Identifies BACH1 as a Key Regulator of Aflatoxin B1-Induced Oxidative Damage.

Aflatoxin B1 (AFB1) is amongst the mycotoxins commonly affecting human and animal health, raising global food safety and control concerns. The mechanisms underlying AFB1 toxicity are poorly understood. Moreover, antidotes against AFB1 are lacking. Genome-wide CRISPR/Cas9 knockout screening in porcine kidney cells identified the transcription factor BTB and CNC homolog 1 (BACH1) as a gene required for AFB1 toxicity. The inhibition of BACH1 expression in porcine kidney cells and human hepatoma cells resulted in increased resistance to AFB1. BACH1 depletion attenuates AFB1-induced oxidative damage via the upregulation of antioxidant genes. Subsequently, virtual structural screening identified the small molecule 1-Piperazineethanol, α-[(1,3-benzodioxol-5-yloxy)methyl] -4-(2-methoxyphenyl) (M2) as an inhibitor of BACH1. M2 and its analogues inhibited AFB1-induced porcine and human cell death in vitro, while M2 administration significantly improved AFB1-induced symptoms of weight loss and liver injury in vivo. These findings demonstrate that BACH1 plays a central role in AFB1-induced oxidative damage by regulating antioxidant gene expression. We also present a potent candidate small-molecule inhibitor in developing novel treatments for AFB1 toxicity.

All-in-One Digital Microfluidics System for Molecular Diagnosis with Loop-Mediated Isothermal Amplification.

In this study, an "all-in-one" digital microfluidics (DMF) system was developed for automatic and rapid molecular diagnosis and integrated with magnetic bead-based nucleic acid extraction, loop-mediated isothermal amplification (LAMP), and real-time optical signal monitoring. First, we performed on- and off-chip comparison experiments for the magnetic bead nucleic acid extraction module and LAMP amplification function. The extraction efficiency for the on-chip test was comparable to that of conventional off-chip methods. The processing time for the automatic on-chip workflow was only 23 min, which was less than that of the conventional methods of 28 min 45 s. Meanwhile, the number of samples used in on-chip experiments was significantly smaller than that used in off-chip experiments; only 5 µL of E. coli samples was required for nucleic acid extraction, and 1 µL of the nucleic acid template was needed for the amplification reaction. In addition, we selected SARS-CoV-2 nucleic acid reference materials for the nucleic acid detection experiment, demonstrating a limit of detection of 10 copies/µL. The proposed "all-in-one" DMF system provides an on-site "sample to answer" time of approximately 60 min, which can be a powerful tool for point-of-care molecular diagnostics.