Development of New Multi-Glycosylation Routes to Facilitate the Biosynthesis of Sweetener Mogrosides from Bitter Immature Siraitia Grosvenorii Using Engineered Escherichia coli.

Mogrosides, which have various pharmacological activities, are mainly extracted from Siraitia grosvenorii (Luo Han Guo) and are widely used as natural zero-calorie sweeteners. Unfortunately, the difficult cultivation and long maturation time of Luo Han Guo have contributed to a shortage of mogrosides. To overcome this obstacle, we developed a highly efficient biosynthetic method using engineered Escherichia coli to synthesize sweet mogrosides from bitter mogrosides. Three UDP-glycosyltransferase (UGT) genes with primary/branched glycosylation catalytic activity at the C3/C24 sites of mogrosides were screened and tested. Mutant M3, which could catalyze the glycosylation of nine types of mogrosides, was obtained through enhanced catalytic activity. This improvement in ß-(1,6)-glycosidic bond formation was achieved through single nucleotide polymorphisms and direct evolution, guided by 3D structural analysis. A new multienzyme system combining three UGTs and UDP-glucose (UDPG) regeneration was developed to avoid the use of expensive UDPG. Finally, the content of sweet mogrosides in the immature Luo Han Guo extract increased significantly from 57% to 95%. This study not only established a new multienzyme system for the highly efficient production of sweet mogrosides from immature Luo Han Guo but also provided a guideline for the high-value utilization of rich bitter mogrosides from agricultural waste and residues.

Apricot polysaccharides as new carriers to make curcumin nanoparticles and improve its stability and antibacterial activity.

Apricot polysaccharides (APs) as new types of natural carriers for encapsulating and delivering active pharmaceutical ingredients can achieve high-value utilization of apricot pulp and improve the solubility, the stability, and the antibacterial activity of insoluble compounds simultaneously. In this research, the purified APs reacted with bovine serum albumin (BSA) by the Maillard reaction, and with d-α-tocopheryl succinate (TOS) and pheophorbide A (PheoA) by grafting to fabricate two materials for the preparation of curcumin (Cur)-encapsulated AP-BSA nanoparticles (CABNs) and Cur-embedded TOS-AP-PheoA micelles (CTAPMs), respectively. The biological activities of two Cur nano-delivery systems were evaluated. APs consisted of arabinose (22.36%), galactose (7.88%), glucose (34.46%), and galacturonic acid (31.32%) after the optimized extraction. Transmission electron microscopy characterization of CABNs and CTAPMs displayed a discrete and non-aggregated morphology with a spherical shape. Compared to the unencapsulated Cur, the release rates of CABNs and CTAPMs decreased from 87% to 70% at 3 h and from 92% to 25% at 48 h, respectively. The antioxidant capacities of CABNs and CTAPMs were significantly improved. The CTAPMs exhibited a better antibacterial effect against Escherichia coli than CABNs due to the synergistic photosensitive effect between Cur and PheoA.

Effect of substrate composition on physicochemical properties of the medium-long-medium structured triacylglycerol.

BACKGROUND: Nutritional and functional qualities and applications of structured lipids (SL) depend on the composition and molecular structure of fatty acids in the glycerol backbone of triacylglycerol (TAG). However, the relationship between the substrate composition and physicochemical qualities of SL has not been revealed. The investigation aims to disclose the effect of substrate composition on the physicochemical properties of medium-long-medium structured lipids (MLM-SLs) by enzymatic interesterification of Lipozyme TLIM/RMIM. RESULTS: The medium-long-chain triacylglycerol (MLCT) yield could reach 70.32%, including 28.98% CaLCa (1,3-dioctonyl-2-linoleoyl glyceride) and 24.34% CaOCa (1,3-didecanoyl-2-oleoyl glyceride). The sn-2 unsaturated fatty acid composition mainly depended on long-chain triacylglycerol (LCT) in the substrate. The increased carbon chain length and double bond in triacylglycerol decreased its melting and crystallization temperature. The balanced substrate composition of MCT/LCT increased the size and finer crystals. Molecular docking simulation revealed that the MLCT molecule mainly interacted with the catalytic triplets of Lipozyme TLIM (Arg81-Ser83-Arg84) and the Lipozyme RMIM (Tyr183-Thr226-Arg262) by OH bond. The oxygen atom of the ester on the MLCT molecule was primarily bound to the hydrogen of hydroxyl and amino groups on the binding sites of Lipozyme TLIM/RMIM. The intermolecular interplay between MLCT and Lipozyme RMIM is more stable than Lipozyme TLIM due to the formation of lower binding affinity energy. CONCLUSION: This research clarifies the interaction mechanism between MLCT molecules and lipases, and provides an in-depth understanding of the relationship between substrate composition, molecular structure and physicochemical property of MLM-SLs. © 2023 Society of Chemical Industry.

Orange-derived extracellular vesicles nanodrugs for efficient treatment of ovarian cancer assisted by transcytosis effect.

Extracellular vesicles (EVs) have recently received much attention about the application of drug carriers due to their desirable properties such as nano-size, biocompatibility, and high stability. Herein, we demonstrate orange-derived extracellular vesicles (OEV) nanodrugs (DN@OEV) by modifying cRGD-targeted doxorubicin (DOX) nanoparticles (DN) onto the surface of OEV, enabling significantly enhancing tumor accumulation and penetration, thereby efficiently inhibiting the growth of ovarian cancer. The obtained DN@OEV enabled to inducement of greater transcytosis capability in ovarian cancer cells, which presented the average above 10-fold transcytosis effect compared with individual DN. It was found that DN@OEV could trigger receptor-mediated endocytosis to promote early endosome/recycling endosomes pathway for exocytosis and simultaneously reduce degradation in the early endosomes-late endosomes-lysosome pathway, thereby inducing the enhanced transcytosis. In particular, the zombie mouse model bearing orthotopic ovarian cancer further validated DN@OEV presented high accumulation and penetration in tumor tissue by the transcytosis process. Our study indicated the strategy in enhancing transcytosis has significant implications for improving the therapeutic efficacy of the drug delivery system.

Insight into the medium-long-medium structured lipids made from Camellia oil: Composition-structure relationship.

Medium-long-medium (MLM) structured lipid (SL) as a new SL is a potential functional ingredient in food and nutraceutical products, but its composition-structure-physicochemical properties relationship has not been revealed in food industry. MLM type of medium-long chain triacylglycerol (MLCT) was synthesized from Camellia oil by combi-lipase; its physicochemical properties and composition-structure relationship were investigated in this research. The higher MLCT (67.24% ± 0.09) and MLM (52.71% ± 0.53) productivities were achieved after parameter optimization. The physicochemical characterization of SLs exhibited mild thermal property, intermediate Fourier transform infrared spectroscopy absorption intensity, and better crystal morphology. Joint characterizations identified that MLM and long-medium-long type SL were rich in 1,3-dioctanoyl-2-linoleoyl glyceride (CaLCa), 1,3-dioctanoyl-2-oleoyl glyceride (CaOCa), 1,3-dilinoleoyl-2-octanoyl glyceride (LCaL), and 1,3-dilinoleoyl-2-decanoyl glyceride (LCL) components, respectively. This is ascribed to the higher proportion of caprylic and linoleic acid in 1,3-specific enzyme. The 3D structural analysis further demonstrated that the CaLCa, CaOCa, LCaL, and LCL molecules had lower steric energy to form symmetrical structure at 1,3-position. This research provides a practical method to produce MLM-type SL from edible oils and fats in food industry.

cRGD-targeted heparin nanoparticles for effective dual drug treatment of cisplatin-resistant ovarian cancer.

Resistance to the chemotherapeutic agent cisplatin (DDP) is the primary reason for invalid chemotherapy of ovarian cancer. Given the complex mechanisms underlying chemo-resistance, the design of combination therapies based on blocking multiple mechanisms is a rationale to synergistically elevate therapeutic effect for effectively overcoming cancer chemo-resistance. Herein, we demonstrated a multifunctional nanoparticle (DDP-Ola@HR), which could simultaneously co-deliver DDP and Olaparib (Ola, DNA damage repair inhibitor) using targeted ligand cRGD peptide modified with heparin (HR) as nanocarrier, enabling the concurrent tackling of multiple resistance mechanisms to effectively inhibit the growth and metastasis of DDP-resistant ovarian cancer. In combination strategy, heparin could suppress the function of multidrug resistance-associated protein 2 (MRP2) and P-glycoprotein (P-gp) to promote the intracellular accumulation of DDP and Ola by specifically binding with heparanase (HPSE) to down-regulate PI3K/AKT/mTOR signaling pathway, and simultaneously served as a carrier combined with Ola to synergistically enhance the anti-proliferation ability of DDP for resistant ovarian cancer, thus achieving great therapeutic efficacy. Our DDP-Ola@HR could provide a simple and multifunctional combination strategy to trigger an anticipated cascading effect, thus effectively overcoming the chemo-resistance of ovarian cancer.

Structure-guided preparation of fuctional oil rich in 1,3-diacylglycerols and linoleic acid from Camellia oil by combi-lipase.

BACKGROUND: Diacylglycerol (DAG)-enriched oil has been attracting attention because of its nutritional benefits and biological functions, although the composition of its various free fatty acids (FFAs) and an unclear relationship between substrate and yield make it difficult to be identified and qualified with respect to its production. In the present study, linoleic acid-enriched diacylglycerol (LA-DAG) was synthesized and enriched from Camellia oil by the esterification process using the combi-lipase Lipozyme TL IM/RM IM system. RESULTS: The relationship between FFA composition and DAG species productivity was revealed. The results showed that heterogeneous FFA with a major constituent (more than 50%) exhibited higher DAG productivity and inhibited triacylglycerol productivity compared to homogeneous constituents. Joint characterization by high-performance liquid chromatography-evaporative light scattering detection, gas chromatography-mass spectrometry and ultra-performance liquid chromatography-heated electrospray ionization-tandem mass spectrometry identified that DAG components contained dilinoleic acid acyl glyceride, linoleyl-oleyl glyceride and dioleic acid acyl glyceride in esterification products. Under the optimum conditions, 60.4% 1,3-DAG and 61.3% LA-DAG in the crude product at 1 h reaction were obtained, and further purified to 81.7% LA-DAG and 94.7% DAG via silica column chromatography. CONCLUSION: The present study provides a guideline for the identification of DAG species, as well as a structure-guided preparation method of DAG-enriched oils via the cost-effective combi-lipase. © 2022 Society of Chemical Industry.

The construction of high efficient visible-light-driven 3D porous g-C3N4/Fe3O4 photocatalyst: A new photo-induced bacterial inactivation material enhanced by cascade photo-Fenton reaction.

Photocatalytic disinfection is considered a promising method for eliminating the hazards of pathogenic bacteria. Graphitic carbon nitride (g-C3N4) is an ideal photocatalytic bacterial inactivation material for its advantage of tunable band structure, good stability and easy preparation. This work has constructed a novel defective 3D porous g-C3N4 by cyanamide carbonation using dendritic mesoporous silica template. The direct loading of Fe3O4 nanoparticles provided an excellent pg-C3N4-Fe3O4 photocatalyst suitable for water disinfection. Compared to pristine g-C3N4, the prepared 3D porous defective g-C3N4-Fe3O4 exhibited the enhanced visible light absorbance as indicated by the band gap decreasing of 0.66 eV, and about 3 and 10 fold increase of photo-induced current response and O2 adsorption respectively. The pg-C3N4-Fe3O4 showed excellent visible-light-driven photocatalytic bactericidal activity. It could kill 1 × 107 cfu mL-1Escherichia coli completely within 1 h under visible-light illumination (100 mW cm-2) with good reusability, its logarithmic bacterial inactivation efficiency was about 2.5 fold higher than pg-C3N4. The enhanced bactericidal performance is mainly ascribed to the Fe3O4 involved cascade photo-Fenton reaction.

Fabrication, characterization, and purification of nutraceutical diacylglycerol components from Camellia oil.

Converting triacylgycerols (TAGs) from edible oils and fats into structured diacylglycerols (DAGs) is meaningful for reducing obesity. Camellia oil, rich in linoleic acid, has the potential to form structured linoleic acid-1,3-diacylglycerol (LA-1,3-DAG) nutrients in the industry. In this research, the physicochemical properties of modified Camellia oil (MCO) by enzymatic esterification were analyzed by Gas Chromatography-Mass Spectrometry (GC-MS), Differential Scanning Calorimetry (DSC), High Performance Liquid Chromatography-Evaporative Light Scattering Detection (HPLC-ELSD), and Ultra Performance Liquid Chromatography-Tandem Mass Spectrometry (UPLC-MS/MS). The relationship between reaction conditions and the DAG compositions is disclosed using multiple factors. It is found that high constituents of DAG increase the melting and crystallization temperature of MCO, lipase Novozym 435 gives the best yield of targeted nutrients (DAG, 1,3-DAG, LA-DAG), and the mixture of lipases, Lipozyme TL IM and Lipozyme RM IM, shows a synergistic effect in the synthetic process of DAG. Subsequently, MCO containing 65.4% DAG, 54.7% LA-DAG, and 47.6% 1,3-DAG content at optimal conditions (2% enzyme dosage, 4 h reaction time, 2.4:1 substrate molar ratio, 25.8% t-butanol as solvent, 60°C temperature) has been obtained and purified using silica column to obtain the final DAG oil containing 96.1% DAG, 64.7% 1,3-DAG, and 78.4% LA-DAG. High constituents of structured DAG oil rich in LA-1,3-DAG can be obtained by enzymatic esterification for industrial production.

Oleic Acid Copolymer as A Novel Upconversion Nanomaterial to Make Doxorubicin-Loaded Nanomicelles with Dual Responsiveness to pH and NIR.

Oleic acid (OA) as main component of plant oil is an important solvent but seldom used in the nanocarrier of anticancer drugs because of strong hydrophobicity and little drug release. In order to develop a new type of OA nanomaterial with dual responses to pH and near infrared light (NIR) to achieve the intelligent delivery of anticancer drugs. The novel OA copolymer (mPEG-PEI-(NBS, OA)) was synthesized by grafting OA and o-nitrobenzyl succinate (NBS) onto mPEGylated polyethyleneimine (mPEG-PEI) by amidation reaction. It was further conjugated with NaYF4:Yb3+/Er3+ nanoparticles, and encapsulated doxorubicin (DOX) through self-assembly to make upconversion nanomicelles with dual response to pH and NIR. Drug release behavior of DOX, physicochemical characteristics of the nanomicelles were evaluated, along with its cytotoxic profile, as well as the degree of cellular uptake in A549 cells. The encapsulation efficiency and drug loading capacity of DOX in the nanomicelles were 73.84% ± 0.58% and 4.62% ± 0.28%, respectively, and the encapsulated DOX was quickly released in an acidic environment exposed to irradiation at 980 nm. The blank nanomicelles exhibited low cytotoxicity and excellent biocompatibility by MTT assay against A549 cells. The DOX-loaded nanomicelles showed remarkable cytotoxicity to A549 cells under NIR, and promoted the cellular uptake of DOX into the cytoplasm and nucleus of cancer cells. OA copolymer can effectively deliver DOX to cancer cells and achieve tumor targeting through a dual response to pH and NIR.

Rheological properties of an ultra-high salt hydrophobic associated polymer as a fracturing fluid system.

Herein, a novel ultra-high salt hydrophobic associated polymer, UUCPAM, was prepared using acrylamide, acrylic acid, 2-acrylamide-2-methyl propane sulfonic acid and the hydrophobic monomer UUC. Polymerization exothermic test results indicated that the increase in the hydrophobic monomer content led to an increase in the exothermic time, which is considerably conducive to the formation of hydrophobic structures. The scanning electron microscopy and transmission electron microscopy studies showed that the polymer had complex network structures and that this phenomenon was considerably obvious in NaCl solution. The fluorescence probe experiment verified that the critical association concentration of this polymer decreased with an increase in the hydrophobic monomer. Rheology studies indicated that the polymer had good temperature and shear resistance in NaCl solution. Moreover, the apparent viscosity of the polymer remained above 80 mPa s when 0.3 wt% UUCPAM was added at 170 s-1 in 20 000 mg L-1 NaCl solution at 90 °C. The storage modulus that indicated strong elasticity increased with an increase in the polymer concentration. Meanwhile, the number of hydrophobic micro-zones increased, thus forming dense network structures. Therefore, the polymer was found to have excellent salt resistance and extensive application prospects.