Fragmented α-Amylase into Microporous Metal-Organic Frameworks as Bioreactors.

This work presents an efficient and facile strategy to prepare an α-amylase bioreactor. As enzymes are quite large to be immobilized inside metal-organic frameworks (MOFs), the tertiary and quaternary structures of α-amylase were first disrupted using a combination of urea, dithiothreitol (DTT), and iodoacetamide (IAA). After losing its tertiary structure, the unfolded proteins can now penetrate into the microporous MOFs, affording fragmented α-amylase@MOF bioreactors. Among the different MOFs evaluated, UiO-66 gave the most promising potential due to the size-matching effect of the α-helix of the fragmented α-amylase with the pore size of UiO-66. The prepared bioreactor exhibited high yields of small carbohydrate (maltose) even when reused up to 15 times (>80% conversion).

Fast multipoint immobilization of lipase through chiral L-proline on a MOF as a chiral bioreactor.

In this paper, we describe the facile preparation of a chiral catalyst by the combination of the amino acid, l-proline (Pro), and the enzyme, porcine pancreas lipase (PPL), immobilized on a microporous metal-organic framework (PPL-Pro@MOF). The multipoint immobilization of PPL onto the MOF is made possible with the aid of Pro, which also provided a chiral environment for enhanced enantioselectivity. The application of the microporous MOF is pivotal in maintaining the catalytic activity of PPL, wherein it prevented the leaching of Pro during the catalytic reaction, leading to the enhanced activity of PPL. The prepared biocatalyst was applied in asymmetric carbon-carbon bond formation, demonstrating the potential of this simple approach for chemical transformations.

ß-secretase 1 inhibitory activity and AMP-activated protein kinase activation of Callyspongia samarensis extracts.

The methanolic extract of Callyspongia samarensis (MCS) significantly inhibited ß-secretase 1 (IC50 99.82 µg/mL) in a dose-dependent manner and demonstrated a noncompetitive type of inhibition. Furthermore, it exhibited the highest AMPK activation (EC50 14.47 µg/mL) as compared with the standard, Aspirin (EC50 >100 µg/mL). HPLC/ESI-MS analysis of MCS extract revealed 15 peaks, in which nine peaks demonstrated similar fragmentation pattern with the known compounds in literature and in database library: 5-aminopentanoic acid (1), 4-aminobutanoic acid (3), Luotonin A (4), (E)-3-(1H-imidazol-5-yl) prop-2-enoic acid (8), Galactosphingosine (10), D-sphingosine (11), 5,7,4'-trihydroxy-3',5'-dimethoxyflavone (12), hydroxydihydrovolide (13), and 3,5-dibromo-4-methoxyphenylpyruvic acid (14); and 6 peaks are not identified (2, 5-7, 9, and 15). Acute oral toxicity test of MCS extract revealed that it is nontoxic, with an LD50 of >2000 mg/kg. Assessment of BBB permeability of MCS extract showed that compound 15 was able to cross the BBB making it a suitable candidate for developing CNS drugs.

A simple approach to achieve a metastable metal oxide derived from carbonized metal-organic gels.

A strategy for fabricating zirconium oxide doped nanoporous carbons derived from metal-organic gels (MOGs) is reported. For the first time, the achievement of metastable ZrO2-NPCs is demonstrated. The direct pyrolysis of MOGs provided new perspective in developing metal oxide-doped NPCs and circumvented the shortcomings of existing methods in synthesizing metastable ZrO2 doped NPCs.

Monitoring the Effect of Different Metal Centers in Metal-Organic Frameworks and Their Adsorption of Aromatic Molecules using Experimental and Simulation Studies.

In this study, the adsorption behavior of different metal centers in analogous M-1,4-NDC frameworks (1,4-NDC=1,4-naphthalenedicarboxylate) towards guest molecules through simulation studies and experimental studies is reported. Simulation studies showed that the adsorption behavior of analogous M-1,4-NDC is affected by the atomic radius of the metal center, which was found to be in agreement with the experimental studies.

The Cooperativity of Fe3 O4 and Metal-Organic Framework as Multifunctional Nanocomposites for Laser Desorption Ionization Process.

A novel and facile strategy in developing a water stable magnetic metal-organic framework nanocomposite (Fe3 O4 @MOF) is herein reported, in which a Keggin polyoxometalate, phosphotungstic acid (HPW), was encapsulated within the MOF framework via one-pot synthesis method. The combination of HPW-embedded MOF and Fe3 O4 endowed the composite with high surface area, strong UV absorption, good hydrophilicity, and enhanced water stability. With these unique properties, the Fe3 O4 @MOF embedded HPW served as adsorbent as well as matrix for SALDI-MS (surface-assisted laser desorption ionization mass spectrometry) analysis of polar and non-polar compounds. The synergistic effect of Fe3 O4 and MOF showed an interference-free background at low mass region than the pristine MOF or Fe3 O4 counterparts. This simple approach can be used as new platform in developing magnetic MOF composites without the time consuming and labor-intensive preparation.

Application of mesoporous carbon-polymer monolith for the extraction of phenolic acid in food samples.

In this study, activated carbon-organic polymer (AC-polymer) extraction columns were prepared via microwave-assisted polymerization. The AC-polymer was applied in polymer monolith microextraction (PMME) of phenolic acids (PAs) in food samples. Structural characterization using Raman and Fourier transform infrared (FTIR) spectroscopy revealed the successful incorporation of AC into polymer monolith. In contrast to neat polymer in which low extraction efficiency (17.0-57.7%) was observed, the AC-polymer (8 mg AC, 4 cm column length) afforded better extraction efficiency for PAs ranging from 75.8 to 99.8% for intra-day with less than 1.4% relative standard deviations (RSDs) and inter-day precision ranging from 74.3 to 100.1% (<2.7% RSDs). The extraction efficiency for column-to-column were found to be in the range of 72.8-100.5% (<2.0% RSDs) (n = 3). Under the optimized conditions, the AC-polymer monolithic column was successfully applied in PMME of PAs in fruit wine and cranberry juice samples at concentrations of <4.8 mg L-1 and 26.54 mg L-1, respectively.

Pore Environment Control and Enhanced Performance of Enzymes Infiltrated in Covalent Organic Frameworks.

In the drive toward green and sustainable methodologies for chemicals manufacturing, biocatalysts are predicted to have much to offer in the years to come. That being said, their practical applications are often hampered by a lack of long-term operational stability, limited operating range, and a low recyclability for the enzymes utilized. Herein, we show how covalent organic frameworks (COFs) possess all the necessary requirements needed to serve as ideal host materials for enzymes. The resultant biocomposites of this study have shown the ability boost the stability and robustness of the enzyme in question, namely lipase PS, while also displaying activities far outperforming the free enzyme and biocomposites made from other types of porous materials, such as mesoporous silica and metal-organic frameworks, exemplified in the kinetic resolution of the alcohol assays performed. The ability to easily tune the pore environment of a COF using monomers bearing specific functional groups can improve its compatibility with a given enzyme. As a result, the orientation of the enzyme active site can be modulated through designed interactions between both components, thus improving the enzymatic activity of the biocomposites. Moreover, in comparison with their amorphous analogues, the well-defined COF pore channels not only make the accommodated enzymes more accessible to the reagents but also serve as stronger shields to safeguard the enzymes from deactivation, as evidenced by superior activities and tolerance to harsh environments. The amenability of COFs, along with our increasing understanding of the design rules for stabilizing enzymes in an accessible fashion, gives great promise for providing "off the shelf" biocatalysts for synthetic transformations.

Synthesis and characterization of trimetallic cobalt, zinc and nickel complexes containing amine-bis(benzotriazole phenolate) ligands: efficient catalysts for coupling of carbon dioxide with epoxides.

New trimetallic cobalt, nickel and zinc complexes 1-3 coordinated by amine-bis(benzotriazole phenolate) ligands and ancillary acetate groups have been developed for the use of CO2/epoxide coupling. All complexes were structurally characterized by single crystal X-ray crystallography; tri-Co complex 1 is the first solid-state example in which three different geometrical configurations exist in the same benzotriazole phenoxide metal complex. Tri-nuclear complexes 1 and 2 with cobalt and zinc metal centers were demonstrated to be very active catalysts for cycloaddition of cyclohexene oxide with CO2 in the presence of ammonium salt co-catalysts to give cis-cyclohexene carbonate under the conditions of 80 °C and 300 psi initial CO2 pressure. Particularly, tri-cobalt complex 1 was found to efficiently couple CO2 with epoxides showing broad substrate scope, producing the corresponding cyclic organic carbonates with good activities and high selectivities. This is a successful example of catalysis for cyclic carbonate synthesis using one cobalt(ii) complex as a homogeneous catalyst.

Nitrogen-doped porous carbon material derived from metal-organic gel for small biomolecular sensing.

A simple preparation method of N-doped PCM via direct carbonization of nitrogen containing metal-organic gel was demonstrated. The resultant N-PCM, with high surface area, mesoporosity, and high UV absorption ability, was used as a matrix to assist small-biomolecule sensing in laser desorption/ionization mass spectrometry.

Enzyme Immobilized on Nanoporous Carbon Derived from Metal-Organic Framework: A New Support for Biodiesel Synthesis.

In this study, nanoporous carbon (NPC) derived from metal-organic framework was used as support for the immobilization of Burkholderia cepacia lipase. The decorated aluminum oxide within the mesoporous NPC improved the enzyme loading efficiency as well as the catalytic ability for the transesterification of soybean oil, thus making it a promising green and sustainable catalytic system for industrial application.

A Simple Approach to Enhance the Water Stability of a Metal-Organic Framework.

A facile method to improve the feasibility of water-unstable metal-organic frameworks in an aqueous environment has been developed that involves imbedding in a polymer monolith. The effect of compartment type during polymerization plays a significant role in maintaining the crystalline structure and thermal stability of the MOFs, which was confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA), respectively. The MOF-polymer composite prepared in a narrow compartment (column, ID 0.8 mm) has better thermal and chemical stability than that prepared in a broad compartment (vial, ID 7 mm). The developed MOF-polymer composite was applied as an adsorbent in solid-phase microextraction of nine non-steroidal anti-inflammatory drugs (NSAIDs) and could be used for extraction more than 30 times, demonstrating that the proposed approach has potential for industrial applications.

Metal-Organic Framework-Polymer Composite as a Highly Efficient Sorbent for Sulfonamide Adsorption and Desorption: Effect of Coordinatively Unsaturated Metal Site and Topology.

In this study, we first demonstrated the effect of two types of metal-organic framework-polymer (MOF-polymer) monoliths on in-tube solid-phase microextraction (IT-SPME) of sulfonamides. Sulfonamides were successfully adsorbed onto MIL-101(Cr)-polymer but were difficult to elute due to these sulfonamides could interact via Lewis acid-base interaction with the presence of Cr(III) coordinatively unsaturated metal sites (CUS). Moreover, the cage-type topology of MIL-101(Cr) that could produce multiple pathways thus complicates the desorption of the test analytes from the sorbent. Contrastingly, MIL-53(Al)-polymer provided weaker Al(III) CUS, and its one-dimensional channel pore structure could provide an unhindered pathway for sulfonamides transfer during elution. After optimizing the IT-SPME condition such as MOF content, pH of sample matrix, column length, extraction flow rate, and elution volume, the calculated extraction recovery of sulfonamides in MIL-53(Al)-polymer as analyzed by microemulsion electrokinetic chromatography (MEEKC) were in the range of 40%-90% with relative standard deviations (RSDs) below 5% and a reusability of at least 30 times.

In vitro angiotensin I converting enzyme inhibition by a peptide isolated from Chiropsalmus quadrigatus Haeckel (box jellyfish) venom hydrolysate.

The anti-angiotensin I converting enzyme activity of box jellyfish, Chiropsalmus quadrigatus Haeckel venom hydrolysate was studied. The venom extract was obtained by centrifugation and ultrasonication. Protein concentration of 12.99 µg/mL was determined using Bradford assay. The pepsin and papain hydrolysate was tested for its toxicity by Limit test following the OECD Guideline 425 using 5 female Sprague-Dawley rats. Results showed that the hydrolysate is nontoxic with an LD50 above 2000 mg/kg. In vitro angiotensin I converting enzyme (ACE) inhibitory activity was determined using ACE kit-WST. Isolation of ACE inhibitory peptides using column chromatography with SP-Sephadex G-25 yielded 8 pooled fractions with fraction 3 (86.5%) exhibiting the highest activity. This was followed by reverse phase - high performance liquid chromatography (RP-HPLC) with an octadecyl silica column (Inertsil ODS-3) using methanol:water 15:85 at a flow rate of 1.0 mL/min. Among the 13 fractions separated with the RP-HPLC, fraction 3.5 exhibited the highest ACE inhibitory activity (84.1%). The peptide sequence ACPGPNPGRP (IC50 2.03 µM) from fraction 3.5 was identified using Matrix-assisted laser desorption/ionization with time-of-flight tandem mass spectroscopy analysis (MALDI-TOF/MS).

Solid-phase microextraction of phthalate esters in water sample using different activated carbon-polymer monoliths as adsorbents.

In this study, the application of different activated carbon-polymer (AC-polymer) monoliths as adsorbents for the solid-phase microextraction (SPME) of phthalate esters (PAEs) in water sample were investigated. The activated carbon (AC) was embedded in organic polymers, poly(butyl methacrylate-co-ethylene dimethacrylate) (poly(BMA-EDMA)) or poly(styrene-co-divinylbenzene) (poly(STY-DVB)), via a 5-min microwave-assisted or a 15-min water bath heating polymerization. Preliminary investigation on the performance of the native poly(BMA-EDMA) and poly(STY-DVB) demonstrated remarkable adsorption efficiencies for PAEs. However, due to the strong hydrophobic, π-π, and hydrogen bonding interactions between the analytes and polymers, low extraction recoveries were achieved. In contrast, the presence of AC in native polymers not only enhanced the adsorption efficiencies but also assisted the PAE desorption, especially for AC-poly(STY-DVB) with extraction recovery ranged of 76.2-99.3%. Under the optimized conditions, the extraction recoveries for intra-, inter-day and column-to-column were in the range of 76.5-100.8% (<3.7% RSDs), 77.2-97.6% (<5.6% RSDs) and 75.5-99.7% (<6.2% RSDs), respectively. The developed AC-poly(STY-DVB) monolithic column showed good mechanical stability, which can be reused for more than 30 extraction times without any significant loss in the extraction recoveries of PAEs. The AC-poly(STY-DVB) monolithic column was successfully applied in SPME of PAEs in water sample with extraction recovery ranged of 78.8%-104.6% (<5.5% RSDs).

Nanoporous Carbons Derived from Metal-Organic Frameworks as Novel Matrices for Surface-Assisted Laser Desorption/Ionization Mass Spectrometry.

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) represents a powerful tool for the analysis of biomolecules, synthetic polymers, and even small organic compounds; its performances largely depend on the type of matrix materials utilized. Here, for the first time the employment of nanoporous carbons derived from metal-organic frameworks (MOFs) as novel matrices for SALDI-MS is demonstrated. The nanoporous carbons derived from MOFs not only circumvent the shortcomings of existing matrix materials but also demonstrate much higher efficiency of laser desorption/ionization for various compounds than any other nanoporous carbons reported so far. A new perspective for the development of matrix materials for SALDI-MS application is therefore provided.

Aluminum based metal-organic framework-polymer monolith in solid-phase microextraction of penicillins in river water and milk samples.

In this study, aluminum based metal-organic framework (Al-MOF)-organic polymer monoliths were prepared via microwave-assisted polymerization of ethylene dimethacrylate (EDMA), butyl methacrylate (BMA) with different weight percentages of Al-MOF (MIL-53; 37.5-62.5%) and subsequently utilized as sorbent in solid-phase microextraction (SPME) of penicillins (penicillin G, penicillin V, oxacillin, cloxacillin, dicloxacillin, nafcillin). The Al-MOF-polymer was characterized using Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM-energy-dispersive X-ray spectroscopy (SEM-EDS) to clarify the retained crystalline structure well as the homogeneous dispersion of Al-MOF (MIL-53) in polymer monolith. The developed Al-MOF-polymer (MIL-53) monolithic column was evaluated according to its extraction recovery of penicillins. Several parameters affecting the extraction recoveries of penicillins using fabricated Al-MOF-polymer (MIL-53) monolithic column including different MIL-53 weight percentages, column length, pH, desorption solvent, and mobile phase flow rate were investigated. For comparison, different Al-based MOFs (MIL-68, CYCU-4 and DUT-5) were fabricated using the optimized condition for MIL-53-polymer (sample matrix at pH 3, 200µL desorption volume using methanol, 37.5% of MOF, 4-cm column length at 0.100mLmin(-1) flow rate). Among all the Al-MOF-polymers, MIL-53(Al)-polymer still afforded the best extraction recovery for penicillins ranging from 90.5 to 95.7% for intra-day with less than 3.5% relative standard deviations (RSDs) and inter-day precision were in the range of 90.7-97.6% with less than 4.2% RSDs. Meanwhile, the recoveries for column-to-column were in the range of 89.5-93.5% (<3.4% RSDs) while 88.5-90.5% (<5.8% RSDs) for batch-to-batch (n=3). Under the optimal conditions, the limit of detections were in the range of 0.06-0.26µgL(-1) and limit of quantifications between 0.20 and 0.87µgL(-1). Finally, the MIL-53-polymer was applied for the extraction of penicillin in river water and milk by spiking trace-level penicillin for as low as 50µgL(-1) and 100µgL(-1) with recoveries ranging from 80.8% to 90.9% (<6.7% RSDs) in river water and 81.1% to 100.7% (<7.1% RSDs) in milk sample, respectively.

Determination of imidazole derivatives by micellar electrokinetic chromatography combined with solid-phase microextraction using activated carbon-polymer monolith as adsorbent.

In this study, an effective method for the separation of imidazole derivatives 2-methylimidazole (2-MEI), 4- methylimidazole (4-MEI) and 2-acetyl-4-tetrahydroxybutylimidazole (THI) in caramel colors using cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-sweeping-MEKC) was developed. The limits of detection (LOD) and quantitation (LOQ) for the CSEI-sweeping-MEKC method were in the range of 4.3-80µgL(-1) and 14-270µgL(-1), respectively. Meanwhile, a rapid fabrication activated carbon-polymer (AC-polymer) monolithic column as adsorbent for solid-phase microextraction (SPME) of imidazole colors was developed. Under the optimized SPME condition, the extraction recoveries for intra-day, inter-day and column-to-column were in the range of 84.5-95.1% (<6.3% RSDs), 85.6-96.1% (<4.9% RSDs), and 81.3-96.1% (<7.1% RSDs), respectively. The LODs and LOQs of AC-polymer monolithic column combined with CSEI-sweeping-MEKC method were in the range of 33.4-60.4µgL(-1) and 111.7-201.2µgL(-1), respectively. The use of AC-polymer as SPME adsorbent demonstrated the reduction of matrix effect in food samples such as soft drink and alcoholic beverage thereby benefiting successful determination of trace-level caramel colors residues using CSEI-sweeping-MEKC method. The developed AC-polymer monolithic column can be reused for more than 30 times without any significant loss in the extraction recovery for imidazole derivatives.

A novel type of matrix for surface-assisted laser desorption-ionization mass spectrometric detection of biomolecules using metal-organic frameworks.

A 3D metal-organic framework (MOF) nanomaterial as matrix for surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) and tandem mass spectrometry (MS/MS) was developed for the analysis of complex biomolecules. Unlike other nanoparticle matrices, this MOF nanomaterial does not need chemical modification prior to use. An exceptional signal reproducibility as well as very low background interferences in analyzing mono-/di-saccharides, peptides and complex starch digests demonstrate its high potential for biomolecule assays, especially for small molecules.

A poly(alkyl methacrylate-divinylbenzene-vinylbenzyl trimethylammonium chloride) monolithic column for solid-phase microextraction.

In this study, an organic polymer monolithic columns, which were prepared via in situ polymerization of alkyl methacrylate-ester (AMA), divinylbenzene (DVB) and vinylbenzyl trimethylammonium chloride (VBTA, charged monomer), were developed as adsorbent for solid-phase microextraction (SPME). Different parameters affecting the extraction efficiency for nine (9) non-steroidal anti-inflammatory drugs (NSAIDs) such as the ratio of the stearyl methacrylate (SMA) to DVB monomer, column length, sample pH, extraction flow rate and desorption solvent were investigated to obtain the optimal SPME condition. Also, the permeability for each poly(AMA-DVB-VBTA) monolithic column was investigated by adding porogenic solvent (poly(ethylene glycol), PEG). Using the optimized condition, a series of AMA-based poly(AMA-DVB-VBTA) monolith columns were developed to determine the effect the extraction efficiency of NSAIDs by varying the alkyl chain length of the methacrylate ester (methyl-, butyl-, octyl-, or lauryl-methacrylate; (MMA, BMA, OMA, LMA)). Results showed that decreasing the AMA chain length increases the extraction efficiency of some NSAIDs (i.e. sulindac (sul), naproxen (nap), ketoprofen (ket) and indomethacin (idm)). Among the poly(AMA-DVB-VBTA) monolithic columns, poly(BMA-DVB-VBTA) showed a highly repeatable extraction efficiency for NSAIDs with recoveries ranging from 85.0 to 100.2% with relative standard deviation (RSD) less than 6.8% (n=3). The poly(BMA-DVB-VBTA) can also be reused for at least 50 times without any significant effect in extraction efficiency for NSAIDs. Finally, using the established conditions, the poly(BMA-DVB-VBTA) was used to extract trace-level NSAIDs (100µgL(-1)) in river water with good recoveries ranging from 75.8 to 90.8% (RSD<14.9%).