MiR-122 knockdown regulates vascular smooth muscle cells phenotypic switching through enhanced FOXO3 expression.

Vascular smooth muscle cells (VSMCs) phenotypic switching is identified as enhanced dedifferentiation, proliferation, and migration ability of VSMCs, in which microRNAs have been identified as important regulators of the process. The present study is aimed to explore the pathophysiological effect of miR-122 on VSMC phenotypic modulation. Here, the result showed that the decreased miR-122 expression was found in VSMCs subjected to platelet-derived growth factor-BB (PDGF-BB) treatment. Next, we investigated the response of miR-122 knockdown in VSMCs with PDGF-BB stimulation. MiR-122 silencing showed increased proliferation and migration capability, whereas attenuated the differentiation markers expression. The above results were reversed by miR-122 overexpression. Finally, we further demonstrated that FOXO3 was an important target for miR-122. Collectively, we demonstrated that miR-122 silencing promoted VSMC phenotypic modulation partially through upregulated FOXO3 expression that indicated miR-122 may be a novel therapeutic target for neointimal formation.

Electrosynthesis of chlorine from seawater-like solution through single-atom catalysts.

The chlor-alkali process plays an essential and irreplaceable role in the modern chemical industry due to the wide-ranging applications of chlorine gas. However, the large overpotential and low selectivity of current chlorine evolution reaction (CER) electrocatalysts result in significant energy consumption during chlorine production. Herein, we report a highly active oxygen-coordinated ruthenium single-atom catalyst for the electrosynthesis of chlorine in seawater-like solutions. As a result, the as-prepared single-atom catalyst with Ru-O4 moiety (Ru-O4 SAM) exhibits an overpotential of only ~30 mV to achieve a current density of 10 mA cm-2 in an acidic medium (pH = 1) containing 1 M NaCl. Impressively, the flow cell equipped with Ru-O4 SAM electrode displays excellent stability and Cl2 selectivity over 1000 h continuous electrocatalysis at a high current density of 1000 mA cm-2. Operando characterizations and computational analysis reveal that compared with the benchmark RuO2 electrode, chloride ions preferentially adsorb directly onto the surface of Ru atoms on Ru-O4 SAM, thereby leading to a reduction in Gibbs free-energy barrier and an improvement in Cl2 selectivity during CER. This finding not only offers fundamental insights into the mechanisms of electrocatalysis but also provides a promising avenue for the electrochemical synthesis of chlorine from seawater electrocatalysis.

Coronary artery spasm treated with intracoronary bioresorbable scaffold implantation under the guidance of treadmill test and optical coherence tomography: A case report.

Coronary artery spasm (CAS) can cause unstable angina, and the treatment of this disease is controversial. We report an elderly male patient who was admitted to hospital due to chest tightness. CAG showed that 70% stenosis in the middle of the right coronary artery (RCA). A bioresorbable scaffold (BRS) was implanted in the lesion under the guidance of optical coherence tomography (OCT). One year later, the patient's symptoms were relieved. The repeated CAG showed that the stent was good. BRS implantation under the guidance of treadmill test and OCT is one of treatment options for CAS patients.

Formation of Head/Tail-to-Body Charged Domain Walls by Mechanical Stress.

Domain walls (DWs) in ferroelectric materials are interfaces that separate domains with different polarizations. Charged domain walls (CDWs) and neutral domain walls are commonly classified depending on the charge state at the DWs. CDWs are particularly attractive as they are configurable elements, which can enhance field susceptibility and enable functionalities such as conductance control. However, it is difficult to achieve CDWs in practice. Here, we demonstrate that applying mechanical stress is a robust and reproducible approach to generate CDWs. By mechanical compression, CDWs with a head/tail-to-body configuration were introduced in ultrathin BaTiO3, which was revealed by in-situ transmission electron microscopy. Finite element analysis shows strong strain fluctuation in ultrathin BaTiO3 under compressive mechanical stress. Molecular dynamics simulations suggest that the strain fluctuation is a critical factor in forming CDWs. This study provides insight into ferroelectric DWs and opens a pathway to creating CDWs in ferroelectric materials.

Ultrahigh Energy Storage Density in Glassy Ferroelectric Thin Films under Low Electric Field.

The current approach to achieving superior energy storage density in dielectrics is to increase their breakdown strength, which often incurs heat generation and unexpected insulation failures, greatly deteriorating the stability and lifetime of devices. Here, a strategy is proposed for enhancing recoverable energy storage density (Wr ) while maintaining a high energy storage efficiency (η) in glassy ferroelectrics by creating super tetragonal (super-T) nanostructures around morphotropic phase boundary (MPB) rather than exploiting the intensely strong electric fields. Accordingly, a giant Wr of ≈86 J cm-3 concomitant with a high η of ≈81% is acquired under a moderate electric field (1.7 MV cm-1 ) in thin films having MPB composition, namely, 0.94(Bi, Na)TiO3 -0.06BaTiO3 (BNBT), where the local super-T polar clusters (tetragonality ≈1.25) are stabilized by interphase strain. To the knowledge of the authors, the Wr of the engineered BNBT thin films represents a new record among all the oxide perovskites under a similar strength of electric field to date. The phase field simulation results ascertain that the improved Wr is attributed to the local strain heterogeneity and the large spontaneous polarization primarily is originated from the super-T polar clusters. The findings in this work present a genuine opportunity to develop ultrahigh-energy-density thin-film capacitors for low-electric-field-driven nano/microelectronics.

Uniting tensile ductility with ultrahigh strength via composition undulation.

Metals with nanocrystalline grains have ultrahigh strengths approaching two gigapascals. However, such extreme grain-boundary strengthening results in the loss of almost all tensile ductility, even when the metal has a face-centred-cubic structure-the most ductile of all crystal structures1-3. Here we demonstrate that nanocrystalline nickel-cobalt solid solutions, although still a face-centred-cubic single phase, show tensile strengths of about 2.3 gigapascals with a respectable ductility of about 16 per cent elongation to failure. This unusual combination of tensile strength and ductility is achieved by compositional undulation in a highly concentrated solid solution. The undulation renders the stacking fault energy and the lattice strains spatially varying over length scales in the range of one to ten nanometres, such that the motion of dislocations is thus significantly affected. The motion of dislocations becomes sluggish, promoting their interaction, interlocking and accumulation, despite the severely limited space inside the nanocrystalline grains. As a result, the flow stress is increased, and the dislocation storage is promoted at the same time, which increases the strain hardening and hence the ductility. Meanwhile, the segment detrapping along the dislocation line entails a small activation volume and hence an increased strain-rate sensitivity, which also stabilizes the tensile flow. As such, an undulating landscape resisting dislocation propagation provides a strengthening mechanism that preserves tensile ductility at high flow stresses.

Cation-Vacancy-Enriched Nickel Phosphide for Efficient Electrosynthesis of Hydrogen Peroxides.

Electrocatalytic hydrogen peroxide (H2 O2 ) synthesis via the two-electron oxygen reduction reaction (2e ORR) pathway is becoming increasingly important due to the green production process. Here, cationic vacancies on nickel phosphide, as a proof-of-concept to regulate the catalyst's physicochemical properties, are introduced for efficient H2 O2 electrosynthesis. The as-fabricated Ni cationic vacancies (VNi )-enriched Ni2- x P-VNi electrocatalyst exhibits remarkable 2e ORR performance with H2 O2 molar fraction of >95% and Faradaic efficiencies of >90% in all pH conditions under a wide range of applied potentials. Impressively, the as-created VNi possesses superb long-term durability for over 50 h, suppassing all the recently reported catalysts for H2 O2 electrosynthesis. Operando X-ray absorption near-edge spectroscopy (XANES) and synchrotron Fourier transform infrared (SR-FTIR) combining theoretical calculations reveal that the excellent catalytic performance originates from the VNi -induced geometric and electronic structural optimization, thus promoting oxygen adsorption to the 2e ORR favored "end-on" configuration. It is believed that the demonstrated cation vacancy engineering is an effective strategy toward creating active heterogeneous catalysts with atomic precision.

RIP2 Knockdown Attenuates Vascular Smooth Muscle Cells Activation via Negative Regulating Myocardin Expression.

BACKGROUND: RIP2 is an adaptor protein contributing to the activation of nuclear factor-κB induced by TNF receptor-associated factor (TRAF) and nucleotide oligomerization domain (NOD)-dependent signaling implicated in innate and adaptive immune response. Beyond regulation of immunity, we aimed to elucidate the role of RIP2 in vascular smooth muscle cell (VSMC) phenotypic modulation. METHODS AND RESULTS: In the current study, we observed that RIP2 showed an increased expression in VSMCs with PDGF-BB stimulation in a dose-dependent manner. Knockdown of RIP2 expression mediated by adenovirus dramatically accelerated the expression of VSMC-specific differentiation genes induced by PDGF-BB. Silencing of RIP2 inhibited proliferative and migratory ability of VSMCs. Additionally, we demonstrated that RIP2 knockdown can promoted myocardin expression. Furthermore, RIP2 inhibition also can attenuate the formation of intimal hyperplasia. CONCLUSIONS: These findings suggested that RIP2 played an important role in regulation of VSMCs differentiation, migration, and proliferation that may due to affect myocardin expression. Our results indicated that RIP2 may be a novel therapeutic target for intimal hyperplasia.

Manipulating ferroelectric behaviors via electron-beam induced crystalline defects.

Ferroelectric nanoplates are attractive for applications in nanoelectronic devices. Defect engineering has been an effective way to control and manipulate ferroelectric properties in nanoscale devices. Defects can act as pinning centers for ferroelectric domain wall motion, altering the switching properties and domain dynamics of ferroelectrics. However, there is a lack of detailed investigation on the interactions between defects and domain walls in ferroelectric nanoplates due to the limitation of previous characterization techniques, which impedes the development of defect engineering in ferroelectric nanodevices. In this study, we applied in situ biasing transmission electron microscopy to explore how dislocation loops, which were judiciously introduced into barium titanate nanoplates via electron beam irradiation, affect the motion of ferroelectric domain walls. The results show that the motion was dramatically suppressed by these localized defects, because of the local strain fields induced by the defects. The pinning effect can be further enhanced by multiple domain walls embedded with defect arrays. These results indicate the possibility of manipulating domain switching in ferroelectric nanoplates via the electron beam.

Direct observation of nanoscale dynamics of ferroelectric degradation.

Failure of polarization reversal, i.e., ferroelectric degradation, induced by cyclic electric loadings in ferroelectric materials, has been a long-standing challenge that negatively impacts the application of ferroelectrics in devices where reliability is critical. It is generally believed that space charges or injected charges dominate the ferroelectric degradation. However, the physics behind the phenomenon remains unclear. Here, using in-situ biasing transmission electron microscopy, we discover change of charge distribution in thin ferroelectrics during cyclic electric loadings. Charge accumulation at domain walls is the main reason of the formation of c domains, which are less responsive to the applied electric field. The rapid growth of the frozen c domains leads to the ferroelectric degradation. This finding gives insights into the nature of ferroelectric degradation in nanodevices, and reveals the role of the injected charges in polarization reversal.

Giant tuning of ferroelectricity in single crystals by thickness engineering.

Thickness effect and mechanical tuning behavior such as strain engineering in thin-film ferroelectrics have been extensively studied and widely used to tailor the ferroelectric properties. However, this is never the case in freestanding single crystals, and conclusions from thin films cannot be duplicated because of the differences in the nature and boundary conditions of the thin-film and freestanding single-crystal ferroelectrics. Here, using in situ biasing transmission electron microscopy, we studied the thickness-dependent domain switching behavior and predicted the trend of ferroelectricity in nanoscale materials induced by surface strain. We discovered that sample thickness plays a critical role in tailoring the domain switching behavior and ferroelectric properties of single-crystal ferroelectrics, arising from the huge surface strain and the resulting surface reconstruction. Our results provide important insights in tuning polarization/domain of single-crystal ferroelectric via sample thickness engineering.

Electronic Modulation of Nickel Disulfide toward Efficient Water Electrolysis.

Developing highly efficient earth-abundant nickel-based compounds is an important step to realize hydrogen generation from water. Herein, the electronic modulation of the semiconducting NiS2 by cation doping for advanced water electrolysis is reported. Both theoretical calculations and temperature-dependent resistivity measurements indicate the semiconductor-to-conductor transition of NiS2 after Cu incorporation. Further calculations also suggest the advantages of Cu dopant to cathodic water electrolysis by bringing Gibbs free energy of H adsorption at both Ni sites and S sites much closer to zero. It is noteworthy that water dissociation on Cu-doped NiS2 (Cu-NiS2 ) surface is even more favorable than those on NiS2 and Pt(111). Thus, the prepared Cu-NiS2 shows noticeably improved performance toward alkaline hydrogen and oxygen evolution reactions (HER and OER). Specifically, it requires merely 232 mV OER overpotential to drive 10 mA cm-2 ; in parallel with Tafel slopes of 46 mV dec-1 . Regarding HER, an onset overpotential of only 68 mV is achieved. When integrated as both electrodes for water electrolysis, Cu-NiS2 needs only 1.64 V to drive 10 mA cm-2 , surpassing the state-of-the-art Ir/C-Pt/C couple (1.71 V). This work opens up an avenue to engineer low-cost and earth-abundant catalysts performing on par with the noble-metal-based one for water splitting.

Doxorubicin-loaded pH-responsive nanoparticles coated with chlorin e6 for drug delivery and synergetic chemo-photodynamic therapy.

The integration of chemotherapy drugs and photosensitizers to form versatile nanoplatforms for achieving chemo-photodynamic synergetic therapy has shown great superiority in tumor theranostic applications. We constructed pH-responsive nanoparticles (DOX/PB NPs) encapsulating the chemotherapeutic drug doxorubicin (DOX) into the cores of PLGA NPs coated with bovine serum albumin (BSA) via a water-in-oil (W/O/W) emulsion method. A simple and efficient chemo-photodynamic synergetic nanoplatform (DOX/PB@Ce6 NPs) was obtained by the adsorption of photosensitizer chlorin e6 (Ce6) onto the surface of the DOX/PB NPs. With optimal size, pH-responsive drug release behavior and excellent singlet oxygen production, the DOX/PB@Ce6 NPs have the potential to enhance anti-tumor efficiency. The cellular uptake, cytotoxicity, chemo-photodynamic synergetic effect and biocompatibility of the NPs were evaluated based on HeLa cells via in vitro experiments. The in vitro chemo-photodynamic synergetic experiments indicated that the DOX/PB@Ce6 NPs had remarkable cancer cell killing efficiency under laser irradiation. Notably, by hemolysis assay, all the NPs displayed excellent blood compatibility and were expected to be applicable for intravenous injection. In summary, the designed DOX/PB@Ce6 NPs multifunctional theranostic nanoplatform had excellent reactive oxygen species generation and would be a potential therapeutic platform for chemo-photodynamic synergetic therapy.

Versatile Nanoplatform Loaded with Doxorubicin and Graphene Quantum Dots/Methylene Blue for Drug Delivery and Chemophotothermal/Photodynamic Synergetic Cancer Therapy.

A versatile platform for nanodrug delivery and synergetic therapy is a promising therapeutic pattern for antitumor treatment in clinical biology. Here, we innovatively encapsulated graphene quantum dots (GQDs) or methylene blue (MB) together with doxorubicin (DOX) into the cores of poly lactic-co-glycolic acid (PLGA) nanoparticles coated with bovine serum albumin (BSA) based on the emulsion method to synthesize core-shell structure nanoparticles (GQDs@DOX/PB and MB@DOX/PB NPs). The GQDs@DOX/PB NPs exhibited excellent photothermal properties and stability under 808 nm laser irradiation. The in vitro chemophotothermal synergetic experiments manifested that the GQDs@DOX/PB NPs effectively cause the thermal ablation of tumor cells under NIR laser irradiation. Meanwhile, the in vitro chemophotodynamic synergetic experiments revealed that the MB@DOX/PB NPs could produce reactive oxygen species and showed outstanding antitumor efficacy under 660 nm laser irradiation. Consequently, the pH-responsive multifunctional nanoparticles prepared by a facile strategy have a high tumor cell-killing efficacy, manifesting excellent potential in synergistic therapy.

Highly Chemo- and Diastereoselective Construction of Quaternary Stereocenters through Palladium-Catalyzed [3 + 2] Cyclization of 5-Alkenyl Thiazolones.

We report a highly chemo- and diastereoselective [3 + 2] cyclization of vinylethylene carbonates and 5-alkenyl thiazolones through palladium catalysis. The previously inert aza-thioester moiety on the thiazolone substrates is reacted selectively with the zwitterionic π-allylpalladium species. A variety of amide monothioacetals (AMTA) with two quaternary stereocenters are facilely synthesized. An additional spirocyclic quaternary stereocenter could be further installed by Rh-catalyzed metal-carbene insertion into the C-S bond on the AMTA moiety in a highly stereoselective manner.

Big to Small: Ultrafine Mo2 C Particles Derived from Giant Polyoxomolybdate Clusters for Hydrogen Evolution Reaction.

Due to its electronic structure, similar to platinum, molybdenum carbides (Mo2 C) hold great promise as a cost-effective catalyst platform. However, the realization of high-performance Mo2 C catalysts is still limited because controlling their particle size and catalytic activity is challenging with current synthesis methods. Here, the synthesis of ultrafine ß-Mo2 C nanoparticles with narrow size distribution (2.5 ± 0.7 nm) and high mass loading (up to 27.5 wt%) on graphene substrate using a giant Mo-based polyoxomolybdate cluster, Mo132 ((NH4 )42 [Mo132 O372 (CH3 COO)30 (H2 O)72 ]·10CH3 COONH4 ·300H2 O) is demonstrated. Moreover, a nitrogen-containing polymeric binder (polyethyleneimine) is used to create MoN bonds between Mo2 C nanoparticles and nitrogen-doped graphene layers, which significantly enhance the catalytic activity of Mo2 C for the hydrogen evolution reaction, as is revealed by X-ray photoelectron spectroscopy and density functional theory calculations. The optimal Mo2 C catalyst shows a large exchange current density of 1.19 mA cm-2 , a high turnover frequency of 0.70 s-1 as well as excellent durability. The demonstrated new strategy opens up the possibility of developing practical platinum substitutes based on Mo2 C for various catalytic applications.

pH and Thermal Dual-Responsive Graphene Oxide Nanocomplexes for Targeted Drug Delivery and Photothermal-Chemo/Photodynamic Synergetic Therapy.

The development of versatile nanoplatforms with efficient tumor-targeting properties and synergistic therapeutic strategies to realize effective antitumor efficiency are highly anticipated in the field of cancer therapy. Herein, we innovatively synthesized targeted nanocomplexes (NCGO-FA) with nanoscale structures by a modified Hummers' method and then used these nanocomplexes to separately load the doxorubicin (DOX) and methylene blue (MB) via π-π stacking, electrostatic attractions, and/or hydrophobic interactions, forming NCGO@DOX-FA and NCGO@MB-FA nanoplatforms. The results demonstrated that the NCGO-FA nanocomplexes have an ultrahigh surface area, a high-load content of drugs, targeting specificity, and a good photothermal conversion efficiency and photostability. Meanwhile, after loading the nanoplatforms with DOX or MB, NCGO-FA delivered drugs into cancer cells by folic acid (FA) receptors and triggered the drug release by heat and in acidic tumor environments. More importantly, compared with individually applied photothermal therapy, photodynamic therapy, or chemotherapy, the photothermal-chemo or photothermal-photodynamic synergistic therapy with the NCGO@DOX-FA or NCGO@MB-FA nanoplatform exhibits a remarkable synergistic effect, resulting in a distinguished antitumor efficiency. Consequently, this work proposes a facile and versatile method to construct a dual-responsive versatile nanoplatform that combines photothermal-chemo and photodynamic therapies, and these nanoplatforms have excellent application prospects for tumor therapy.

Nano-RuO2 -Decorated Holey Graphene Composite Fibers for Micro-Supercapacitors with Ultrahigh Energy Density.

Compactness and versatility of fiber-based micro-supercapacitors (FMSCs) make them promising for emerging wearable electronic devices as energy storage solutions. But, increasing the energy storage capacity of microscale fiber electrodes, while retaining their high power density, remains a significant challenge. Here, this issue is addressed by incorporating ultrahigh mass loading of ruthenium oxide (RuO2 ) nanoparticles (up to 42.5 wt%) uniformly on nanocarbon-based microfibers composed largely of holey reduced graphene oxide (HrGO) with a lower amount of single-walled carbon nanotubes as nanospacers. This facile approach involes (1) space-confined hydrothermal assembly of highly porous but 3D interconnected carbon structure, (2) impregnating wet carbon structures with aqueous Ru3+ ions, and (3) anchoring RuO2 nanoparticles on HrGO surfaces. Solid-state FMSCs assembled using those fibers demonstrate a specific volumetric capacitance of 199 F cm-3 at 2 mV s-1 . Fabricated FMSCs also deliver an ultrahigh energy density of 27.3 mWh cm-3 , the highest among those reported for FMSCs to date. Furthermore, integrating 20 pieces of FMSCs with two commercial flexible solar cells as a self-powering energy system, a light-emitting diode panel can be lit up stably. The current work highlights the excellent potential of nano-RuO2 -decorated HrGO composite fibers for constructing micro-supercapacitors with high energy density for wearable electronic devices.

Ultrahigh piezoelectricity in ferroelectric ceramics by design.

Piezoelectric materials, which respond mechanically to applied electric field and vice versa, are essential for electromechanical transducers. Previous theoretical analyses have shown that high piezoelectricity in perovskite oxides is associated with a flat thermodynamic energy landscape connecting two or more ferroelectric phases. Here, guided by phenomenological theories and phase-field simulations, we propose an alternative design strategy to commonly used morphotropic phase boundaries to further flatten the energy landscape, by judiciously introducing local structural heterogeneity to manipulate interfacial energies (that is, extra interaction energies, such as electrostatic and elastic energies associated with the interfaces). To validate this, we synthesize rare-earth-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT), as rare-earth dopants tend to change the local structure of Pb-based perovskite ferroelectrics. We achieve ultrahigh piezoelectric coefficients d33 of up to 1,500 pC N-1 and dielectric permittivity ε33/ε0 above 13,000 in a Sm-doped PMN-PT ceramic with a Curie temperature of 89 °C. Our research provides a new paradigm for designing material properties through engineering local structural heterogeneity, expected to benefit a wide range of functional materials.

Nanostructured Polyaniline Coating on ITO Glass Promotes the Neurite Outgrowth of PC 12 Cells by Electrical Stimulation.

A conducting polymer polyaniline (PANI) with nanostructure was synthesized on indium tin oxide (ITO) glass. The effect of electrical stimulation on the proliferation and the length of neurites of PC 12 cells was investigated. The dynamic protein adsorption on PANI and ITO surfaces in a cell culture medium was also compared with and without electrical stimulation. The adsorbed proteins were characterized using SDS-PAGE. A PANI coating on ITO surface was shown with 30-50 nm spherical nanostructure. The number of PC 12 cells was significantly greater on the PANI/ITO surface than on ITO and plate surfaces after cell seeding for 24 and 36 h. This result confirmed that the PANI coating is nontoxic to PC 12 cells. The electrical stimulation for 1, 2, and 4 h significantly enhanced the cell numbers for both PANI and ITO conducting surfaces. Moreover, the application of electrical stimulation also improved the neurite outgrowth of PC 12 cells, and the number of PC 12 cells with longer neurite lengths increased obviously under electrical stimulation for the PANI surface. From the mechanism, the adsorption of DMEM proteins was found to be enhanced by electrical stimulation for both PANI/ITO and ITO surfaces. A new band 2 (around 37 kDa) was observed from the collected adsorbed proteins when PC 12 cells were cultured on these surfaces, and culturing PC 12 cells also seemed to increase the amount of band 1 (around 90 kDa). When immersing PANI/ITO and ITO surfaces in a DMEM medium without a cell culture, the number of band 3 (around 70 kDa) and band 4 (around 45 kDa) proteins decreased compared to that of PC 12 cell cultured surfaces. These results are valuable for the design and improvement of the material performance for neural regeneration.