RESUMEN
Two-dimensional (2D) organic-inorganic hybrid Ruddlesden-Popper perovskites (OIRPPs), which consist of naturally formed "multiple quantum well (MQW)-like" structure, have received considerable interest in optoelectronic applications, owing to their outstanding optical properties and tailorable functionalities. While the quantum-confined electrons and holes at an MQW structure are under an applied electric field, the tilt of the energy bands may cause a significant influence on their optical properties. This work demonstrates the presence of internal built-in electric fields (BIEFs) at the as-synthesized 2D OIRPP single crystals. Spontaneous Franz-Keldysh oscillations, which usually act as the fingerprint to account for the presence of BIEFs in the MQW-like structures, are observed at 2D OIRPPs by the highly sensitive differential technique of modulated thermoreflectance spectroscopy. The strength of BIEFs at 2D OIRPP single crystals reduces with increased n values due to the increased width of the quantum well. The origin of the presence of BIEFs at 2D OIRPPs is further unveiled by atomically resolved scanning tunneling microscopy on their electronic band structures at organic-inorganic interfaces. Unlike the conventional III-V MQW semiconductors with the BIEFs, which are dominated by the spatial concentration gradients at heterointerfaces, the presence of BIEFs at the 2D OIRPP single crystals is attributed to the molecular dipoles within organic spacers pointing to the organic-inorganic interfaces. The discovery of internal BIEFs at the 2D OIRPPs may provide deep insight into understanding the fundamental optical properties for the future design of large-area and low-cost perovskite optoelectronic devices.
RESUMEN
In contrast to the 2D organic-inorganic hybrid Ruddlesden-Popper halide perovskites (RPP), a new class of 2D all inorganic RPP (IRPP) has been recently proposed by substituting the organic spacers with an optimal inorganic alternative of cesium cations (Cs+ ). Nevertheless, the synthesis of high-membered 2D IRPPs (n > 1) has been a very challenging task because the Cs+ need to act as both spacers and A-site cations simultaneously. This work presents the successful synthesis of stable phase-pure high-membered 2D IRPPs of Csn+1 Pbn Br3n+1 nanosheets (NSs) with n = 3 and 4 by employing the strategy of using additional strong binding bidentate ligands. The structures of the 2D IRPPs (n = 3 and 4) NSs are confirmed by powder X-ray diffraction and high-resolution aberration-corrected scanning transmission electron microscope measurements. These 2D IRPPs NSs exhibit a strong quantum confinement effect with tunable absorption and emission in the visible light range by varying their n values, attributed to their inherent 2D quantum-well structure. The superior structural and optical stability of the phase-pure high-membered 2D IRPPs make them a promising candidate as photocatalysts in CO2 reduction reactions with outstanding photocatalytic performance and long-term stability.
RESUMEN
This work demonstrates the direct visualization of atomically resolved quantum-confined electronic structures at organic-inorganic heterointerfaces of two-dimensional (2D) organic-inorganic hybrid Ruddlesden-Popper perovskites (RPPs); this is accomplished with scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) by using solvent engineering to prepare perpendicularly oriented 2D RPPs. Atomically resolved band mapping images across the organic-inorganic interfaces of 2D RPPs yield typical quantum-well-like type-I heterojunction band alignment with band gaps depending on the thicknesses or n values of the inorganic perovskite slabs. The presence of edge states within the band gap due to organic cation vacancies is also observed. In addition, real-space visualization of atomic-scale structural phase transition behavior and changes in local electronic band structures are obtained simultaneously. Our results provide an unequivocal observation and explanation of the quantum-confined electronic structures formed at organic-inorganic interfaces of 2D RPPs.
RESUMEN
Organometallic two-dimensional (2D) nanosheets with tailorable components have recently fascinated the optoelectronic communities due to their solution-processable nature. However, the poor stability of organic molecules may hinder their practical application in photovoltaic devices. Instead of conventional organometallic 2D nanosheets with low weatherability, an air-stable π-conjugated 2D bis(dithiolene)iron(II) (FeBHT) coordination nanosheet (CONASH) is synthesized via bottom-up liquid/liquid interfacial polymerization using benzenehexathiol (BHT) and iron(II) ammonium sulfate [Fe(NH4)2(SO4)2] as precursors. The uncoordinated thiol groups in FeBHT are easily oxidized, but the Fe(NH4)2(SO4)2 dissociation rate is slow, which facilitates the protection of sulfur groups by iron(II) ions. The density functional theory calculates that the resultant FeBHT network gains the oxygen-repelling function for oxidation suppression. In air, the FeBHT CONASH exhibits self-powered photoresponses with short response times (<40 ms) and a spectral responsivity of 6.57 mA W-1, a specific detectivity of 3.13 × 1011 Jones and an external quantum efficiency of 2.23% under 365 nm illumination. Interestingly, the FeBHT self-powered photodetector reveals extremely high long-term air stability, maintaining over 94% of its initial photocurrent after aging for 60 days without encapsulation. These results open the prospect of using organometallic 2D materials in commercialized optoelectronic fields.
RESUMEN
Intensive energy demand urges state-of-the-art rechargeable batteries. Rechargeable aluminum-ion batteries (AIBs) are promising candidates with suitable cathode materials. Owing to high abundance of carbon, hydrogen, and oxygen and rich chemistry of organics (structural diversity and flexibility), small organic molecules are good choices as the electrode materials for AIB. Herein, a series of small-molecule quinone derivatives (SMQD) as cathode materials for AIB were investigated. Nonetheless, dissolution of small organic molecules into liquid electrolytes remains a fundamental challenge. To nullify the dissolution problem effectively, 1,4-benzoquinone was integrated with four bulky phthalimide groups to form 2,3,5,6-tetraphthalimido-1,4-benzoquinone (TPB) as the cathode materials and assembled to be the AI/TPB cell. As a result, the Al/TPB cell delivered capacity as high as 175 mA h/g over 250 cycles in the urea electrolyte system. Theoretical studies have also been carried out to reveal and understand the storage mechanism of the TPB electrode.
RESUMEN
Perovskite α-CsPbI3 nanocrystals (NCs) with a high fluorescence quantum yield (QY) typically undergo a rapid phase transformation to a low-QY δ-CsPbI3 phase, thus limiting their optoelectronic applications. In this study, organic molecule hexamethyldisilathiane (HMS) is used as a unique surfactant to greatly enhance the stability of the cubic phase of CsPbI3 NCs (HMS-CsPbI3) under ambient conditions. The reaction kinetics of the phase transformation of CsPbI3 NCs are systemically investigated through in situ photoluminescence (PL), X-ray diffraction, and transmission electron microscope (TEM) measurements under moisture. The activation energy of HMS-CsPbI3 NCs is found to be 14 times larger than that of CsPbI3 NCs capped by olyelamine (OLA-CsPbI3 NCs). According to density functional theory calculations, the bonding between HMS and CsPbI3 NCs is stronger than that between OLA and CsPbI3 NCs, preventing the subsequent phase transformation. Our study presents a clear pathway for achieving highly stable CsPbI3 NCs for future applications.
RESUMEN
We have demonstrated two novel donor-acceptor-donor (D-A-D) hole-transport material (HTM) with spiro[fluorene-9,9'-phenanthren-10'-one] as the core structure, which can be synthesized through a low-cost process in high yield. Compared to the incorporation of the conventional HTM of commonly used 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-OMeTAD), the synthesis process is greatly simplified for the presented D-A-D materials, including a minimum number of purification processes. This results in an increased production yield (>55 %) and suppressed production cost (<30â $ g-1 ), in addition to high power conversion efficiency (PCE) in perovskite solar cells (PSCs). The PCE of a PSC using our D-A-D HTM reaches 16.06 %, similar to that of Spiro-OMeTAD (16.08 %), which is attributed to comparable hole mobility and charge-transfer efficiency. D-A-D HTMs also provide better moisture resistivity to prolong the lifetime of PSCs under ambient conditions relative to their Spiro-OMeTAD counterparts. The proposed new type of D-A-D HTM has shown promising performance as an alternative HTM for PSCs and can be synthesized with high production throughput.