RESUMEN
Petal-like heterojunction materials ZnCo2O4/CoMoO4 with abundant oxygen vacancies are prepared on nickel foam (NF) using modified ionic hybrid thermal calcination technology. Nanoscale ion intermixing between Zn and Mo ions induces oxygen vacancies in the annealing process, thus creating additional electrochemical active sites and enhancing the electrical conductivity. The ZnCo2O4/CoMoO4 conductive network skeleton forms the primary transport pathway for electrons, while the internal electric field of the heterojunction serves as the secondary pathway. ZnCo2O4/CoMoO4 exhibits excellent rate performance and high capacity attributable to its unique double electron transport mode and the effect of oxygen vacancies. The initial discharge capacity at a current of 0.1 A g-1 is approximately 1774 mAh g-1, and the reversible capacity remains at 1100 mAh g-1 after 200 cycles. After a high current of 1 A g-1, the reversible capacity is observed to remain at approximately 1240 mAh g-1. The electronic structure, crystal structure, and work function of the heterojunction interface model are then analyzed by density functional theory (DFT). The analysis results indicate that the charge at the ZnCo2O4/CoMoO4 interface is unevenly distributed, which leads to an enhanced degree of electrochemical reaction. The presence of an internal electric field improves the transport efficiency of the carriers. Experimental and theoretical calculations demonstrate that the ZnCo2O4/CoMoO4 anode material designed in this work provides a reference for fabricating transition metal oxide-based lithium-ion batteries.
RESUMEN
A flexible phase-change film with thermal management and microwave absorption capabilities was developed for use in wearable devices. The film was created using a solution casting method based on a porous carbon-loaded eicosane (LP33/EI) material. LP33 served as the porous encapsulation medium, while Eicosane (EI) acted as the phase change component. The flexible substrate was a blend of polyvinyl alcohol (PVA) and bacterial cellulose nanocellulose (BC). The ultrathin film had a thickness of 0.262 mm, and LP33/EI-4 exhibited exceptional mechanical strength of 188 MPa. Testing revealed that the phase transition process had melting and crystallization enthalpies of 134.71 J/g and 126.11 J/g, respectively. The encapsulation structure effectively prevented any leakage during the phase transition process. Under simulated solar irradiation of 200 mW/cm2, LP33/EI-4 achieved a photothermal conversion efficiency (η) of 89.46 %. Additionally, the porous LP33 structure and high dielectric loss contributed to remarkable microwave absorption capabilities of -42 dB in the X-band and - 52 dB in the Ku-band. Overall, LP33/EI films demonstrated exceptional performance in thermal management, energy storage, and microwave absorption, making them an ideal choice for a variety of applications in wearable devices.