RESUMEN
Objective: To screen and analyze the factors affecting the prognosis of replacing single missing tooth by autograft tooth, so as to provide reference for clinical judgment of surgical prognosis. Methods: A total of 176 patients (188 teeth) underwent autotransplantation of teeth in the Department of Oral & Maxillofacial Surgery, School of Stomatology, The Fourth Military Medical University from January 2017 to December 2019, including 85 teeth of males and 103 teeth of females were involved. The age was (33.0±9.8) years (16-65 years). The possible factors affecting the prognosis of replacing single missing tooth by autograft tooth were summarized and grouped, and the clinical and imaging data were recorded and judged. The surgical records and photographic data from the patients' previous medical records were retrospectively analyzed. The survival analysis method was used for statistical analysis to screen out the factors affecting the cumulative survival rate of transplanted teeth. Results: The 5-year cumulative survival rate of 188 transplanted teeth was 88.4%. Univariate Log-Rank analysis showed that age (P<0.001), sex (P=0.008), smoking (P<0.001), position of recipient area (P<0.001), height of alveolar bone in recipient area (P<0.001), time of donor tooth in vitro (P<0.001), use of donor model (P<0.001) and initial stability (P<0.001) were significantly correlated with cumulative survival rate of transplanted teeth. Multivariate Cox proportional hazard regression analysis showed that smoking (ß=-2.812, P=0.049), alveolar bone height (ß=1.521, P=0.020), donor time (ß=-2.001, P=0.019), use of donor model (ß=1.666, P=0.034) and initial stability (ß=-1.417, P=0.033) were significantly correlated with the cumulative survival rate of transplanted teeth. Conclusions: The prognosis of autogenous tooth transplantation can be predicted by smoking, height of alveolar bone in recipient area, time of donor teeth in vitro, use of donor model and initial stability. Good prognosis of transplanted teeth can be obtained by using donor model during operation, reducing the time of donor teeth in vitro, taking effective methods to restore alveolar bone height, maintaining good initial stability, and good oral health education after operation.
Asunto(s)
Pérdida de Diente , Diente , Adulto , Femenino , Humanos , Masculino , Pronóstico , Estudios Retrospectivos , Diente/trasplante , Trasplante Autólogo , Resultado del Tratamiento , Adulto JovenRESUMEN
Objective: To prepare a three-dimensional (3D) printing donor tooth model and to observe its application in the peri-operative period. Methods: In part one, 192 cases (2017.9-2019.8) from Department of Oral & Maxillofacial Surgery, School of Stomatology, The Fourth Military Medical University ï¼»107 males and 85 females, age (34.2±10.7) yearsï¼½ which need autotransplantation of teeth (ATT) were collected. Whether the donor teeth can be completely extracted was predicted through clinical and imaging examination (first prediction). The second prediction was supplemented by the three-dimensional printing model of the donor teeth. Each of the prediction was compared with the actual results and the coincidence rate was calculated. In part two, 64 cases (2017.9-2019.8) from Department of Oral & Maxillofacial Surgery, School of Stomatology, The Fourth Military Medical University ï¼»28 males, 36 females, age (30.2±8.3) yearsï¼½ which need ATT were randomly divided into the model group and the donor group. The time of alveolar fossa preparation, time of donor tooth in vitro, times of trial implantation and time of pulptomy and root canal location were recorded respectively. Results: In part one, the coincidence rate between the second prediction and the actual results ï¼»97.4%(187/192)ï¼½ was significantly higher than that of the first prediction ï¼»93.2%(179/192)ï¼½ (P<0.05). In part two, the preparation time of the alveolar fossa in the maxillary and mandibular were (18.8±4.6) and (22.7±3.4) min, the time of the teeth in vitro were (3.0±0.6) and (2.1±0.6) min, the times of trial implantation were (1.3±0.8) and (1.0±0.9), and the time of pulpotomy and root canal location were (4.3±0.6) and (4.0±0.5) min. All values in the model groups were better than those in the donor group (P<0.05). Conclusions: The 3D printing model is accurate. It can be used in autogenous tooth transplantation to shorten the preparation time of alveolar fossa and time of donor tooth in vitro, and reduce the times of trial implantation of donor teeth, and to help to improve the prediction accuracy of complete extraction of donor teeth and the time of pulpotomy and root canal location.
Asunto(s)
Cirugía Asistida por Computador , Diente , Femenino , Masculino , Modelos Dentales , Impresión Tridimensional , Trasplante AutólogoRESUMEN
Objective: To investigate the clinical characteristics of 8 immunodeficiency cases caused by human recombination activating gene 1 (RAG1) mutations, and to explore the relationship among genotypes, clinical manifestations and immunophenotypes. Methods: Clinical data were collected and analyzed from patients with RAG1 mutations who visited the Department of Clinical Immunology, Children's Hospital of Fudan University between October 2013 and June 2017. The data included clinical manifestations, immunophenotypes and genotypes. Results: A total of 8 patients were diagnosed with RAG1 deficiency (6 boys and 2 girls). The minimum age of onset was 2 months, and the maximum age was 4 months. The minimum age of diagnosis was 2 months, and the maximum age was 13 years. Four patients had a family history of infant death due to severe infections. Two cases were born to the same consanguineous parents. All cases had recurrent infections, including involvement of respiratory tract (8 cases), digestive tract (6 cases), urinary tract (1 case), and central nervous system (1 case). The pathogens of infection included bacteria, viruses and fungi. Rotavirus was found in 3 cases, cytomegalovirus (CMV) in 5 cases, bacillus Calmette-Guérin adverse reaction in 2 cases (1 of whom had a positive acid-fast smear from lymph node puncture fluid), fungal infection in 3 cases. One case had multiple nodular space-occupying lesions in lungs and abdominal cavity complicated with multiple bone destruction. The peripheral blood lymphocyte counts of all patients ranged between 0.1 ×10(9)/L and 3.3×10(9)/L (median, 0.65×10(9)/L). Eosinophilia was found in 3 cases (range, (0.48-1.69) ×10(9)/L). The patients were classified according to immunophenotype as severe combined immunodeficiency phenotype (4 cases), leaky severe combined immunodeficiency (2 cases), Omenn syndrome (1 case) and combined immunodeficiency (1 case) . Decreased serum IgG levels were found in 3 cases, increased serum IgM levels in 3 cases, increased serum IgE levels in 5 cases. RAG1 homozygous mutations were detected in 5 cases and RAG1 compound heterozygous mutations in 3 cases. Two novel mutations and six previously reported mutations were identified. Three cases were successfully treated with hematopoietic stem cell transplantation. Four cases died due to infections, and the 13 year-old patient was still under follow-up in the outpatient clinic. Conclusions: Different RAG1 gene mutations can lead to diverse clinical presentations and immune phenotypes. Clinicians should pay attention to the family history of infant death with severe infection. In that situation, immunological evaluation and gene detection should be performed as early as possible.
Asunto(s)
Proteínas de Homeodominio/genética , Fenotipo , Inmunodeficiencia Combinada Grave/genética , Adolescente , Niño , Preescolar , Consanguinidad , Citomegalovirus , Femenino , Genes RAG-1/genética , Genotipo , Trasplante de Células Madre Hematopoyéticas , Homocigoto , Humanos , Inmunofenotipificación , Lactante , Linfocitos , Masculino , MutaciónRESUMEN
OBJECTIVE: To evaluate the methods of flow cytometric-dihydrorhodamine 123 (DHR) analysis, gp91 protein detection, gene mutation analysis for the precise diagnosis of chronic granulomatous disease (CGD). METHOD: Clinical and laboratory data of patients with CGD confirmed by gene mutation analysis from 2008 to 2015 in Children's Hospital of Fudan University were retrospectively reviewed.The results of respiratory burst, gp91 protein level, and gene mutations were analyzed.The relationships among these three methods were explored. RESULT: A total of 138 patients of CGD with confirmed gene mutation were included in this study, of them, 123 cases(89.1%) had CYBB gene mutation, 4 cases(2.9%) had CYBA mutation, 5 cases(3.6%) had NCF1 mutation and 6 cases(4.4%) had NCF2 mutation.The range of stimulatory index (SI) was 0.8-60.5, the 25 th, 50 th, 75th percent was 1.7, 2.7, 4.7; 112 cases had the results of gp91, of them, 100 with gp91(0,) 2 with gp91(-), and 10 with gp91(+) . Six mutations, which were not reported before, were c. 76-77delTT, c. 343-344delCA, c. 481A>T, c. 1152G>C, c. 1613G>A for CYBB gene, and c. 137T>G for NCF2 gene. Among CGD patients with CYBB mutation, SI of patients with gp91(+) was higher than patients with gp91(0) 14.6 vs. 2.5(t=44.21, P=0.004). Patients of NCF1 mutation had higher SI than patients with CYBB mutation, 17.7 vs. 2.5 (t=60.8, P=0.003). CONCLUSION: Flow cytometric-DHR analysis and gp91 protein detection are important diagnostic methods for CGD, they could help the precise diagnosis of CGD.Different mutation types, different mutation genes could have impact on the results of respiratory burst and gp91 level.The application of diagnostic technology from function, protein to gene analysis could help precise diagnosis of CGD.
Asunto(s)
Enfermedad Granulomatosa Crónica/diagnóstico , Niño , Análisis Mutacional de ADN , Citometría de Flujo , Enfermedad Granulomatosa Crónica/genética , Humanos , Glicoproteínas de Membrana/genética , Mutación , NADPH Oxidasa 2 , NADPH Oxidasas/genética , Estallido Respiratorio , Estudios RetrospectivosAsunto(s)
Antiinflamatorios/uso terapéutico , Clobetasol/análogos & derivados , Histamina/efectos adversos , Dolor/fisiopatología , Prurito/prevención & control , Sensación Térmica/efectos de los fármacos , Administración Cutánea , Adulto , Análisis de Varianza , Antiinflamatorios/administración & dosificación , Clobetasol/administración & dosificación , Clobetasol/uso terapéutico , Método Doble Ciego , Femenino , Glucocorticoides , Humanos , Masculino , Pomadas , Umbral del Dolor/efectos de los fármacos , Placebos , Prurito/inducido químicamente , Umbral Sensorial/efectos de los fármacosRESUMEN
The effect of menthol and alcohol as its vehicle on thermal sensations, pain, experimental itch and irritation were studied in 18 subjects, using a computerized thermal sensory analyzer, laser Doppler flowmetry and an evaporimeter for transepidermal water loss (TEWL). Menthol had a subjective cooling effect lasting up to 70 min in 12/18 subjects; however, it did not affect cold and heat threshold, nor did it affect cold and heat pain threshold. Alcohol produced an immediate cold sensation lasting up to 5 min in 4/18 subjects and lowered the sensitivity of cold sensation threshold (P < 0.05). Histamine injection did not change thermal and pain thresholds. Menthol did not alleviate histamine-induced itch magnitude, nor its duration. Following histamine injection, cold sensation median threshold decreased by 1.2 degrees C from (29.9 degrees C to 28.7 degrees C) on the site treated with menthol (P < 0.01) with similar changes in thresholds at the alcohol-treated site (P < 0.05). Warm sensation and pain threshold in subjects receiving histamine injections, measured after menthol and alcohol application, did not differ from their baseline values with histamine alone. TEWL at the site treated with menthol was significantly higher (P < 0.05) than at the alcohol-treated and the control site (P < 0.01), suggesting that menthol has a higher skin irritating effect, or at least alters the stratum corneum water permeability. Our results suggest that menthol fulfills the definition of a counterirritant, but does not affect histamine-induced itch, nor does it affect pain sensation.