Hybrid Treatment via MHz Acoustic Waves and Plasma to Enhance Seed Germination in Mung Bean.

We investigate a hybrid treatment-consisting of an atmospheric pressure plasma pretreatment, followed by an MHz surface acoustic waves (SAWs) treatment with either de-ionized (DI) water or plasma activated water (PAW)-on mung beans to accelerate the germination process, as mung bean sprout is one of the important food staples. For the early growth rate (after 320 min), we observe that the hybrid treatment with PAW can lead to approximately 217% higher moisture content for the treated beans when compared with that without hybrid treatment. Additionally, the hybrid-treated beans germinate in around 120 min, while the untreated beans germinate only in around 420 min, that is, 3.5-fold faster for treated beans. This can be attributed to the dominant effect of SAW that accelerates stage 1 water absorption process and the effect of direct plasma and PAW that promote stage 2 metabolism process, leading to the enhancement in stage 3 germination process in early growth rate. For the post growth rate (after 24 h), we observe that the hybrid treatment with DI water can lead to an approximately 44.20% in higher moisture and 71.17% in radicle length when compared with untreated beans. Interestingly, the hybrid treatment with PAW, on the other hand, is observed to have an adverse effect on germination after 24 h, that is, approximately 14.51% lower in moisture content and 43.49% lower in radicle length for the hybrid-treated beans with PAW when compared with that with DI water.

Lamb to Rayleigh Wave Conversion on Superstrates as a Means to Facilitate Disposable Acoustomicrofluidic Applications.

Rayleigh surface acoustic waves (SAWs) have been demonstrated as a powerful and effective means for driving a wide range of microfluidic actuation processes. Traditionally, SAWs have been generated on piezoelectric substrates, although the cost of the material and the electrode deposition process makes them less amenable as low-cost and disposable components. As such, a "razor-and-blades" model that couples the acoustic energy of the SAW on the piezoelectric substrate through a fluid coupling layer and into a low-cost and, hence, disposable silicon superstrate on which various microfluidic processes can be conducted has been proposed. Nevertheless, it was shown that only bulk vibration in the form of Lamb waves can be excited in the superstrate, which is considerably less efficient and flexible in terms of microfluidic functionality compared to its surface counterpart, that is, the SAW. Here, we reveal an extremely simple way that quite unexpectedly and rather nonintuitively allows SAWs to be generated on the superstrate-by coating the superstrate with a thin gold layer. In addition to verifying the existence of the SAW on the coated superstrate, we carry out finite-difference time domain numerical simulations that not only confirm the experimental observations but also facilitate an understanding of the surprising difference that the coating makes. Finally, we elucidate the various power-dependent particle concentration phenomena that can be carried out in a sessile droplet atop the superstrate and show the possibility for simply carrying out rapid and effective microcentrifugation-a process that is considerably more difficult with Lamb wave excitation on the superstrate.

Acoustically Driven Micromixing: Effect of Transducer Geometry.

The ability to drive efficient micromixing on a microfluidic platform is crucial for a wide range of lab-on-a-chip applications. Here, we investigate the ability of acoustic waves generated on different geometric surfaces (concave and convex) to enhance the micromixing efficiency in droplet acoustomicrofluidic systems, and, concomitantly, to reduce the power consumption in these devices for a given performance requirement. Quite counterintuitively, we observe that although the acoustic streaming velocity, which scaled inversely with the droplet size, tended to be generally lower (by approximately 45%) when the flow is generated by transducers with convex surfaces compared to those with concave surfaces, the mixing efficiency is disproportionately higher: compared to pure diffusional mixing in the absence of the acoustic forcing, the mixing efficiency due to the acoustically driven convection increased by up to 25% and 43% on these respective surfaces. As such, the mixing enhancement cannot simply be attributed to an increase in the convective flow arising from the acoustic forcing. Rather, we observe the mixing enhancement to be due to the stronger chaotic advection arising in the transducer with the convex surface due to its diverging acoustic field into the droplet.

Acoustially-mediated microfluidic nanofiltration through graphene films.

We exploit the possibility of enhancing the molecular transport of liquids through graphene films using amplitude modulated surface acoustic waves (SAWs) to demonstrate effective and efficient nanoparticle filtration. The use of the SAW, which is an extremely efficient means for driving microfluidic transport, overcomes the need for the large mechanical pumps required to circumvent the large pressure drops encountered in conventional membranes for nanoparticle filtration. 100% filtration efficiency was obtained for micron-dimension particulates, decreasing to only 95% for the filtration of particles of tens of nanometers in dimension, which is comparable to that achieved with other methods. To circumvent clogging of the film, which is typical with all membrane filters, a backwash operation to flush the nanoparticles is incorporated simply by reversing the SAW-induced flow such that 98% recovery of the initial filtration rate is recovered. Given these efficiencies, together with the low cost and compact size of the chipscale SAW devices, we envisage the possibility of scaling out the process by operating a large number of devices in parallel to achieve typical industrial-scale throughputs with potential benefits in terms of substantially lower capital, operating and maintenance costs.

Amplitude modulation schemes for enhancing acoustically-driven microcentrifugation and micromixing.

The ability to drive microcentrifugation for efficient micromixing and particle concentration and separation on a microfluidic platform is critical for a wide range of lab-on-a-chip applications. In this work, we investigate the use of amplitude modulation to enhance the efficiency of the microcentrifugal recirculation flows in surface acoustic wave microfluidic systems, thus concomitantly reducing the power consumption in these devices for a given performance requirement-a crucial step in the development of miniaturized, integrated circuits for true portable functionality. In particular, we show that it is possible to obtain an increase of up to 60% in the acoustic streaming velocity in a microdroplet with kHz order modulation frequencies due to the intensification in Eckart streaming; the streaming velocity is increasing as the modulation index is increased. Additionally, we show that it is possible to exploit this streaming enhancement to effect improvements in the speed of particle concentration by up to 70% and the efficiency of micromixing by 50%, together with a modest decrease in the droplet temperature.

Graphene-mediated microfluidic transport and nebulization via high frequency Rayleigh wave substrate excitation.

The deposition of a thin graphene film atop a chip scale piezoelectric substrate on which surface acoustic waves are excited is observed to enhance its performance for fluid transport and manipulation considerably, which can be exploited to achieve further efficiency gains in these devices. Such gains can then enable complete integration and miniaturization for true portability for a variety of microfluidic applications across drug delivery, biosensing and point-of-care diagnostics, among others, where field-use, point-of-collection or point-of-care functionality is desired. In addition to a first demonstration of vibration-induced molecular transport in graphene films, we show that the coupling of the surface acoustic wave gives rise to antisymmetric Lamb waves in the film which enhance molecular diffusion and hence the flow through the interstitial layers that make up the film. Above a critical input power, the strong substrate vibration displacement can also force the molecules out of the graphene film to form a thin fluid layer, which subsequently destabilizes and breaks up to form a mist of micron dimension aerosol droplets. We provide physical insight into this coupling through a simple numerical model, verified through experiments, and show several-fold improvement in the rate of fluid transport through the film, and up to 55% enhancement in the rate of fluid atomization from the film using this simple method.

Suppression of the Leidenfrost effect via low frequency vibrations.

The ability to suppress the Leidenfrost effect is of significant importance in applications that require rapid and efficient cooling of surfaces with temperature higher than the Leidenfrost point TSL. The Leidenfrost effect will result in substantial reduction in cooling efficiency and hence there have been a few different approaches to suppress the Leidenfrost effect. The majority of these approaches relies on fabricating micro/nano-structures on heated surfaces, others rely on inducing an electric field between the droplets and the heated surfaces. In this paper, we present an approach that induces low frequency vibrations (f∼10(2) Hz) on a heated surface to suppress the effect. By mapping the different magnitudes of surface acceleration [greek xi with two dots above]sversus different initial surface temperatures Ts of the substrate, three regimes that represent three distinct impact dynamics are analyzed. Regime-I represents gentle film boiling ([greek xi with two dots above]s∼10(2) m s(-2) and Ts∼TSL), which is associated with the formation of thin spreading lamella around the periphery of the impinged droplet; Regime-II ([greek xi with two dots above]s∼10(2) m s(-2) and Ts>TSL) represents film boiling, which is associated with the rebound of the impinged droplet due to the presence of a thick vapor layer; Regime-III ([greek xi with two dots above]s∼10(3) m s(-2) and Ts∼TSL) represents contact boiling, which is associated with the ejection of tiny droplets due to the direct contact between the droplet and the heated surface. The estimated cooling enhancement for Regime-I is between 10% and 95%, Regime-II is between 5% and 15%, and Regime-III is between 95% and 105%. The improvement in cooling enhancement between Regime-I (strong Leidenfrost effect) and Regime-III (suppressed Leidenfrost effect) is more than 80%, demonstrating the effectiveness of using low frequency vibrations to suppress the Leidenfrost effect.