The influence of new medial linkage orthosis on walking and independence in spinal cord injury patients: a pilot study.

In an effort to overcome the disadvantages of reciprocating gait orthoses (RGOs) and medial linkage orthoses (MLOs), a new design of MLO was developed. Therefore the aim of this study was comparison effect of a new reciprocating MLO and traditional isocentric RGO on gait parameters and functional independence (orthosis donning and doffing time) in spinal cord injury (SCI) subjects to provide more evidence of its efficacy. Four people with motor incomplete SCI participated in this study. Each participant was fitted with an MLO and isocentric reciprocating gait orthosis (IRGO) to enable a comparison of walking speed, cadence and endurance to be performed. There were no statistically significant differences demonstrated in temporal-spatial parameters between the orthotic walking conditions in this study, but walking with the MLO improved the stride length and speed of walking by 28.57 and 40.9% compared with walking with an IRGO as a control condition. Hip flexion occurred predominantly during single-support phases, with negligible motion during double-support phases. The first and second Subjects had hip kinematic pattern more near normal when they walked with medial linkage reciprocal gait orthosis (MLRGO) in comparison with IRGO. There was significant difference between donning and doffing in two conditions (P=0.046) but there was not significant difference between two conditions in standing and sitting although these two conditions improved by new MLO. The new MLO provided a quicker and more independent gait compared with IRGO, in addition the new MLO made it easier for subjects to get from sitting to standing and from standing to sitting.

The effect of aging on gait parameters in able-bodied older subjects: a literature review.

BACKGROUND: Gait disorders are common in the elderly populations, and their prevalence increases with age. Abnormal gait has been associated with greater risk for adverse outcomes in older adults, such as immobility and falls, which in turn lead to loss of functional independence and death. AIM: The purpose of this review was to evaluate all of the original papers that measured gait parameters in the healthy elderly subjects. METHOD: The search strategy was based on Population Intervention Comparison Outcome method. A search was performed in Pub Med, Science Direct, Google scholar, ISI web of knowledge databases by using the selected keywords. Forty-two articles were selected for final evaluation. The procedure using the PRISMA method was followed. RESULTS: Stride lengths of older subjects ranged between 135 and 153 cm, and they preferred to walk with a 41 % increase in step width compared to young subjects. Cadence was reported to be between 103 and 112 steps/min in older adults. They consumed an average of 20-30 % more metabolic energy than younger subjects. All except one study demonstrated that older people have significantly reduced gait symmetry. CONCLUSION: The progression toward shorter steps and slower walking and increased step width and prolonged double support in older adult, may therefore emerge as a compensatory strategy aimed at increasing stability, avoiding falls, or reducing the energetic cost of mobility.

The influence of a rocker sole adaptation on gait parameters in spinal cord injury patients ambulating with the advanced reciprocating gait orthosis - a pilot study.

OBJECTIVE: When walking with an advanced reciprocating gait orthosis (ARGO), ankle and knee joint motion is restricted which causes an un-cosmetic gait compared to normal walking. The purpose of this study was to develop and evaluate a rocker modification for use with the ARGO in order to improve hip joint kinematics, walking speed, step length and cadence. METHOD: Spinal cord injury patients (n = 4) with thoracic-level injury participated in this study, and walked with a standard ARGO and one which was also adapted with a rocker sole in a randomized order. RESULTS: Mean walking speed and step length were both significantly increased by volunteer SCI subjects when ambulating using the ARGO adapted with a rocker sole compared to the standard ARGO. Cadence was not significantly affected, but swing time was significantly reduced and mean hip flexion and extension were both significantly increased when walking with the adapted ARGO. CONCLUSION: The rocker sole modification produced an increase in walking speed and step length, and improved sagittal plane hip joint kinematics when ambulating using an ARGO. Using this type of shoe modification has the potential to improve gait parameters in SCI patients compared to the standard unmodified version. Implications for Rehabilitation The ARGO adapted with a rocker sole could be used by spinal cord injury patients. A major advantage of the walking with the ARGO adapted with a rocker sole was increased of walking speed and step length, and improvement of the sagittal plane hip joint kinematics. The findings of this study would appear to provide useful data for rehabilitation teams who utilize orthoses to walk and rehabilitate SCI subjects. Using this type of shoe modification has the potential to improve gait parameters in SCI patients compared to the standard un-modified version.

The efficiency of mechanical orthoses in affecting parameters associated with daily living in spinal cord injury patients: a literature review.

OBJECTIVE: The most simple and common approach in providing standing and walking by subjects with spinal cord injury (SCI) is the use of mechanical orthoses. These include traditional orthoses, medial linkage orthoses (MLOs) and reciprocating gait orthoses (RGOs). Independence, energy expenditure, gait parameters, system reliability and cosmesis are important factors in orthotic design. The aim of this review was to compare the evidence of existing mechanical orthoses to that of other types regarding these factors. METHODS: The preferred reporting items for systematic reviews and meta-analyses (PRISMA) method was used by an experience researcher based on selected keywords and their composition and an electronic search was performed in well-known databases. RESULTS: Twenty articles were selected for final evaluation. Many were case studies, and also had limited and heterogeneous sample sizes with different instruments used for evaluation. The results of the analysis demonstrated that independence and cosmesis are improved when using MLOs, but gait parameters, energy expenditure and stability are all improved when using RGOs. CONCLUSION: Those mechanical orthoses which have reciprocal motion and congruency between the anatomical and orthotic joints have been shown to provide positive effects on patient lifestyles. However, further improvement is needed to more effectively meet the needs of SCI patients. IMPLICATIONS FOR REHABILITATION: The most simple and traditional approach to enable standing and walking by people with SCI is use of purely mechanical orthoses. The most important factors that increase rejection rates of orthoses in paraplegia patients are excessive energy expenditure and increased applied force on upper limb joints. Improvement of the structure of mechanical orthoses is needed to improve independence, energy expenditure, and gait parameters, and is an important approach to improve ambulatory function in subjects with paraplegia.

The efficacy of foot orthoses on alteration to center of pressure displacement in subjects with flat and normal feet: a literature review.

PURPOSE: The aim of this review was to evaluate and compare the effect of foot orthoses on center of pressure (CoP) displacement in healthy patients and those with flat foot. METHOD: The search strategy was based on the Population Intervention Comparison Outcome (PICO) method. A search was performed in PubMed, Science Direct, Google scholar and ISI web of knowledge databases by using selected keywords. Seventeen articles were selected for final evaluation. The procedure was followed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. RESULT: The results of the literature review demonstrated that there is lack of evidence to show that FOs improve CoP displacement in subjects with flat foot. CONCLUSION: There is no consistent evidence to prove the efficacy of FOs on altering CoP displacement in healthy subjects but in those with flat foot, FOs decreased CoP excursion. Implications for Rehabilitation Foot orthoses (FOs) have become an integral part of the treatment of injuries of the foot, ankle, and lower extremity. Assessment of FOs effect on the COP displacement can help to provide a better understanding of the body's compensatory mechanisms and their therapeutic effects. There is no consistent evidence to prove the efficacy of FOs on CoP displacement in healthy subjects but in flat foot subjects foot orthoses decreased CoP excursion has been demonstrated.

The influence of thoracolumbosacral orthoses on standing balance in patients with adolescent idiopathic scoliosis: a pilot study.

BACKGROUND AND AIM: The objective of this study was to assess the effect of thoracolumbosacral orthoses (TLSOs) on antero-posterior (AP) sway, medio-lateral (ML) sway and displacement of the center of pressure (COP) during a longitudinal study in patients with adolescent idiopathic scoliosis (AIS). METHODS: Eight females aged between 12 and 14.5 years participated in this study. Evaluations were performed prior to the TLSO intervention as a baseline condition, after 1 month, and after 4 months of orthosis use by assessing balance when standing statically on different surfaces. RESULTS: When standing on both lower limbs on a solid surface there were significant differences in ML sway with the eyes both open and closed, and also in A/P sway but only when standing on a solid surface with the eyes open and also when standing on a foam surface with the eyes closed with TLSO use. When standing on the dominant leg, ML sway significantly improved, but AP sway only improved with a foam base surface with the eyes open. CONCLUSION: This study demonstrated positive effects of wearing a TLSO in improving quiet standing balance and standing on the dominant lower extremity in subjects with AIS after 4 months of brace use. Implications for Rehabilitation Due to a change in body shape such as that caused by scoliosis, human posture changes and spinal deformities affect the position of the center of support, and thus balance ability may change. AIS subjects have poor standing stability compared to a healthy matched control group. Brace wearing had positive effect in improving quiet standing balance and standing on the dominant lower extremity in subjects with AIS undergoing brace treatment after 4 months of TLSO use.

The efficacy of powered orthoses on walking in persons with paraplegia.

BACKGROUND: Powered orthoses are a new generation of assistive devices for people with spinal cord injury, which are designed to induce motion to paralyzed lower limb joints using external power via electric motors or pneumatic or hydraulic actuators. OBJECTIVE: Powered gait orthoses provide activated movement of lower limb joints to limit the forces applied through the upper limb joints and trunk muscles during ambulation due to the need to use an external walking aid, while simultaneously improving the kinetics and kinematics of walking in subjects with spinal cord injury. This article reviews their walking efficacy when used by people with paraplegia. STUDY DESIGN: Literature review. METHOD: A literature search was performed in ISI Web of Knowledge, PubMed, Google Scholar, ScienceDirect, and Scopus databases. RESULTS: Efficacy was demonstrated in producing activated motion of lower limb joints. Powered gait orthoses have a beneficial effect on the kinetics, kinematics, and temporal-spatial parameters of gait, but their effect on muscle activity in individuals with spinal cord injury is still unclear. CONCLUSIONS: Further research is needed regarding the design and construction of powered gait orthoses using significant power application to the ankle joints and their effect on lower limb muscle activity and gait patterns in spinal cord injury subjects. CLINICAL RELEVANCE: Powered orthoses is a new generation of orthotic intervention that could potentially be significant in assisting in improving the walking parameters and energy consumption of spinal cord injury subjects.

The influence of trunk extension in using advanced reciprocating gait orthosis on walking in spinal cord injury patients: A pilot study.

BACKGROUND: Spinal cord injury patients walk with a flexed trunk when using reciprocating gait orthoses. Reduction of trunk flexion during ambulation may produce an improvement in gait parameters for reciprocating gait orthosis users. OBJECTIVES: To investigate the effect on kinematics and temporal-spatial parameters when spinal cord injury patients ambulate with an advanced reciprocating gait orthosis while wearing a thoracolumbosacral orthosis to provide trunk extension. STUDY DESIGN: Comparative study between before and after use o thoracolumbosacral orthosis with the advanced reciprocating gait orthoses. METHODS: Four patients with spinal cord injury were fitted with an advanced reciprocating gait orthosis and also wore a thoracolumbosacral orthosis. Patients walked along a flat walkway either with or without the thoracolumbosacral orthosis at their self-selected walking speed. Temporal-spatial parameters and lower limb kinematics were analyzed. RESULTS: Mean walking speed, step length, and cadence all improved when walking with the thoracolumbosacral orthosis donned compared to the trunk support offered by the advanced reciprocating gait orthosis. Hip and ankle joint ranges of motion were significantly increased when wearing the thoracolumbosacral orthosis during ambulation. CONCLUSION: Using an advanced reciprocating gait orthosis when wearing a thoracolumbosacral orthosis can improve walking speed and the step length of walking as compared with walking with an advanced reciprocating gait orthosis, probably due to the extended position of the trunk. CLINICAL RELEVANCE: Donning the thoracolumbosacral orthosis produced a relatively extended trunk position in the advanced reciprocating gait orthosis for all the patients included in the study, which resulted in improved gait parameters.

Influence of orthotic gait training with powered hip orthosis on walking in paraplegic patients.

OBJECTIVES: Gait training has been shown to improve the walking performance of spinal cord-injured (SCI) patients. The use of powered hip orthoses (PHO) during gait training is one approach which could potentially improve rehabilitative outcomes for such subjects. The aim of this study was therefore to evaluate the influence of a PHO on the kinematics and temporal-spatial parameters of walking by SCI patients. METHODS: Four SCI patients participated in this study. Gait evaluation was performed at baseline and at 10 weeks following intervention with the use of a PHO and gait re-training. Walking speed, step length, vertical and horizontal compensatory motions and hip joint kinematics were analysed prior to and following the training regime. RESULTS: Significant increases in walking speed and step length were demonstrated by the SCI patients when walking with the PHO following orthotic gait training. Sagittal plane hip range of motion also increased, but not significantly. However, vertical and horizontal compensatory motions decreased significantly. CONCLUSIONS: Positive effects on the kinematics and temporal-spatial parameters of gait by SCI subjects were demonstrated following a period of gait training with a PHO. Further studies are therefore warranted to confirm their long term effects on the rehabilitation of SCI subjects. IMPLICATIONS FOR REHABILITATION: Powered hip orthosis could be used by spinal cord injury patients. A major advantage of the orthotic gait training with powered hip orthosis was regeneration of hip movement closer to that of normal human walking. The orthotic gait training with the powered hip orthosis improved the kinematics and temporalspatial parameters in a spinal cord injury patient which also produced near-normal hip joint angle patterns during gait.

Gait evaluation of new powered knee-ankle-foot orthosis in able-bodied persons: a pilot study.

BACKGROUND: Knee-ankle-foot orthoses are utilized for walking by patients with lower limb weakness. However, they may be rejected by patients due to the lack of knee flexion available when using them for walking activities. AIM: The aim of this study was to perform a pilot study investigating the effect of a new powered knee-ankle-foot orthosis on walking in healthy persons before testing with patients with lower limb weakness. METHODS: Walking evaluation was performed on five healthy subjects (mean age: 26 ± 5.6 years). Walking trials were randomly performed in three test conditions: normal walking without an orthosis, walking with a conventional knee-ankle-foot orthosis unilaterally, and also with a new powered knee-ankle-foot orthosis applied to the same leg. RESULTS: The means of walking speed, cadence, and knee flexion during swing and step length were all decreased. Compensatory motions were increased by both orthoses compared to normal walking. More knee flexion was observed in both swing and stance phases when walking with the powered knee-ankle-foot orthosis compared to the conventional knee-ankle-foot orthosis. CONCLUSION: The results demonstrated the potential of a powered orthosis in providing improvements in gait parameters compared to a conventional device in healthy subjects but are yet untested in subjects with lower limb weakness. CLINICAL RELEVANCE: The results of this study demonstrated that a powered knee-ankle-foot orthosis could lock the knee during stance and provide active knee flexion during swing to potentially reduce the tripping during ambulation.

A custom-made neoprene thumb carpometacarpal orthosis with thermoplastic stabilization: an orthosis that promotes function and improvement in patients with the first carpometacarpal joint osteoarthritis.

BACKGROUND AND AIM: Patients with mild to moderate first carpometacarpal joint osteoarthritis report pain, a reduction in pinch and grip strength and hand function. The purpose of this study was to analyze the effect of a custom-made neoprene thumb carpometacarpal orthosis with thermoplastic stabilization on pain, function, grip strength, and key pinch in these patients. TECHNIQUE: A total of 11 volunteer patients participated in this study. All the above-mentioned parameters were evaluated at baseline and also 30, 60, and 90 days after using the splint. DISCUSSION: A decrease in pain was observed after 30 days, and this continued to improve during treatment with the splint. After 90 days of using the splint, grip strength was improved. Function and pinch strength also increased significantly and was maintained during the study period compared to baseline. CLINICAL RELEVANCE: A custom-made neoprene thumb carpometacarpal orthosis with thermoplastic stabilization may be a suitable conservative approach for the treatment of first carpometacarpal joint osteoarthritis.

Frontal plane corrective ability of a new unloader orthosis for medial compartment of the knee.

BACKGROUND: Patients with medial compartment osteoarthritis of the knee suffer from pain and stiffness. However, current unloader braces are not being used for extended periods by knee osteoarthritis patients due to interface problems, so compliance is an issue. The aim of this study was to design a new bespoke orthosis that could be comfortable to wear while also providing the required correction to reduce medial compartment loading. CASE DESCRIPTION AND METHODS: A new knee orthosis design was initially tested for its frontal plane correction of knee varus using a surrogate knee model. It was then assessed by a volunteer subject with grade 2 medial compartment knee osteoarthritis using a static standing radiograph. FINDINGS AND OUTCOMES: When fitted to the surrogate knee model, the brace corrected the knee from 10° of varus to neutral alignment in the frontal plane. When worn in situ during static stance on the affected leg of the volunteer patient, it corrected the knee by 6° to a less varus position. CONCLUSION: The orthosis provided frontal plane correction of the knee during static standing. It could therefore prove to be suitable for use by knee osteoarthritis patients.

The effect of an isocentric reciprocating gait orthosis incorporating an active knee mechanism on the gait of a spinal cord injury patient: a single case study.

OBJECTIVE: The aim of this study was to identify the effect of induced knee flexion during gait on the kinematics and temporal-spatial parameters during walking by a patient with spinal cord injury (SCI) through the application of an isocentric reciprocating gait orthosis (IRGO) with a powered knee mechanism. METHODS: Two orthoses were considered and evaluated for an ISCI subject with a T8 level of injury. An IRGO was initially manufactured by incorporating drop lock knee joints and was fabricated with custom molded AFOs to block ankle motion. This orthosis was also adapted with electrically-activated knee joints to provide active knee extension and flexion when disengaged. RESULTS: Walking speed, stride length and cadence were increased 37.5%, 11% and 26%, respectively with the new orthosis as compared to using the IRGO. The vertical and horizontal compensatory motions reduced compared to mechanical IRGO. At end of stance phase, knee joint flexion was 37.5° for the AKIRGO compared to 7° of movement when walking with the IRGO. The overall pattern of walking produced was comparable to that of normal human walking. CONCLUSION: Knee flexion during swing phase resulted in an improved gait performance and also reduction in compensatory motions when compared to a mechanical IRGO.

Gait evaluation of the advanced reciprocating gait orthosis with solid versus dorsi flexion assist ankle foot orthoses in paraplegic patients.

BACKGROUND: Mechanical orthoses are used for standing and walking after neurological injury. Most orthoses such as the advanced reciprocating gait orthosis typically use solid ankle-foot orthoses. OBJECTIVES: The goal of this study was to test the effects of ankle dorsiflexion assistance in patients with spinal cord injury when ambulating with an advanced reciprocating gait orthosis compared to walking with fixed ankles. STUDY DESIGN: Quasi-experimental. METHODS: Four patients with spinal cord injury were fitted with an advanced reciprocating gait orthosis equipped with solid and dorsiflexion assist-type ankle-foot orthoses and walked at their self-selected speed. Joint angles and spatial-temporal parameters were measured and analyzed. RESULTS: The mean walking speed and stride length were both significantly increased along with cadence by the volunteer subjects when ambulating using the advanced reciprocating gait orthosis fitted with dorsiflexion assist ankle-foot orthoses compared to the advanced reciprocating gait orthosis with solid ankle-foot orthoses. The mean ankle joint ranges of motion were significantly increased when walking with the advanced reciprocating gait orthosis with dorsiflexion assist ankle-foot orthoses compared to when using the advanced reciprocating gait orthosis with the solid ankle-foot orthoses. Knee joint ranges of motion were reduced, and hip joint ranges of motion were increased but not significantly. CONCLUSION: The advanced reciprocating gait orthosis fitted with the dorsiflexion assist ankle-foot orthoses had the effect of improving gait parameters when compared to the advanced reciprocating gait orthosis with solid ankle-foot orthoses. Clinical relevance The advanced reciprocating gait orthosis with dorsiflexion assist ankle-foot orthoses has the potential to improve hip and ankle joint kinematics and the temporal-spatial parameters of gait in spinal cord injury patients' walking.

Effect of powered gait orthosis on walking in individuals with paraplegia.

BACKGROUND: The important purpose of a powered gait orthosis is to provide active joint movement for patients with spinal cord injury. OBJECTIVES: The aim of this study was to clarify the effect of a powered gait orthosis on the kinematics and temporal-spatial parameters in paraplegics with spinal cord injury. STUDY DESIGN: Quasi-experimental. METHODS: Four spinal cord injury individuals experienced gait training with a powered gait orthosis for a minimum of 6 weeks prior to participating in the following walking trials: walking with an isocentric reciprocating gait orthosis and walking with both separate and synchronized movements with actuated orthotic hip and knee joints in a powered gait orthosis. Specific parameters were calculated and compared for each of the test conditions. RESULTS: Using separate and synchronized actuated movement of the hip and knee joints in the powered gait orthosis increased gait speed and step length and reduced lateral and vertical compensatory motions when compared to the isocentric reciprocating gait orthosis, but there were no significant differences in these parameters. Using the new powered gait orthosis improved knee and hip joint kinematics. CONCLUSIONS: The powered gait orthosis increased speed and step length as well as hip and knee joint kinematics and reduced the vertical and lateral compensatory motions compared to an isocentric reciprocating gait orthosis in spinal cord injury patients. CLINICAL RELEVANCE: This new powered gait orthosis has the potential to improve hip and knee joint kinematics, the temporal-spatial parameters of gait in spinal cord injury patients walking.

Comparison of custom-made and prefabricated neoprene splinting in patients with the first carpometacarpal joint osteoarthritis.

AIM: The objective of this study was to compare the effect of prefabricated and custom made thumb splints on pain, function, grip strength and key pinch In patients with basilar joint osteoarthritis. METHOD: Volunteer patients (n = 35) with first carpometacarpal joint osteoarthritis were assigned randomly to wear either a prefabricated or custom-made thumb splint or assigned to a control group. This was designed as a cross over study with two 4-week treatment periods, 2 weeks of wash out time for intervention groups between the test conditions and 10-weeks follow-up for the control group. All parameters were measured at the first visit and during the 4th, 6th and 10th weeks In the three groups. RESULTS: In the control group, paIn increased and pinch strength decreased but no statistically significant differences were found In function and grip strength. Both splints changed grip strength with no significant differences between them. PaIn was reduced with the splints, and functions and pinch strength increased significantly as compared to the baseline and control groups. In comparing the two splints only significant differences were observed In pain. CONCLUSION: In comparing two splints, paIn was the only significantly different parameter between tested parameters; with the custom-made splints demonstrating better results In paIn reduction.

Design and fabrication of a finger prosthesis based on a new method of suspension.

BACKGROUND AND AIM: Finger amputation is one of the most common types of amputation. Prosthesis with adequate suspension, user-friendly design, and an aesthetic appearance can be effective in the rehabilitation of these patients. The aim of this technical note was to propose a technique for fabrication of finger prosthesis with a new suspension approach for such patients. TECHNIQUE: To design and accurately fabricate the socket of finger prosthesis, the socket was reduced by 2 mm less than the original value, and a central tunnel with 4 mm width and depth with length matching the distance between the end of the stump and the nail section was provided, so that the silicone material extended to the stump to provide appreciable suspension. DISCUSSION: This study demonstrated the design and fabrication of a silicone finger prosthesis. It also showed silicone finger prosthesis with acceptable suspension, a user-friendly and light design, and a cosmetic appearance constructed for a patient with finger amputation. CLINICAL RELEVANCE: Patients with finger amputation usually use prostheses with a simple suspension technique, but evidence suggests that the residuum of these patients experience atrophy and subsequently loss of appropriate suspension. Therefore, this study was required to provide an alternative suspension method in patients with finger amputations.

Use of a three-curved rocker sole shoe modification to improve intermittent claudication calf pain--a pilot study.

This was a pilot study utilizing hospital-based walking trials to compare two footwear conditions. Two pairs of identical therapeutic shoes were ordered for volunteer claudicant subjects. One pair was adapted with a specifically designed three-curve rocker sole. Volunteer claudicant subjects (n = 8, mean age 66 +/- 9.9 years) with stable pain-free distances of 10-400 meters to calf claudication pain were recruited into the study. Walking trials were used to compare differences in both the pain-free distance to claudication and the intensity of the calf pain once claudicating exhibited by each subject while walking separately with the two footwear conditions during the same clinical session. The results demonstrated that claudicant pain-free walking distance was increased, and the intensity of claudication calf pain reduced when walking with the rocker-soled in comparison with baseline. A specifically designed rocker sole has the potential to offer a reduction in the intensity of calf pain experienced by claudicants. A more extensive study is planned to determine the efficacy of this new footwear adaptation when the footwear is worn for extended periods.