Production and partial characterization of exopolysaccharides produced by two Lactobacillus suebicus strains isolated from cider.

Many lactic acid bacteria synthesize extracellular polysaccharides (exopolysaccharides, EPSs) with a large variation in structure and potential functional properties. Although EPS production can produce detrimental effects in alcoholic beverages, these polymers play an important role in the rheological behavior and texture of fermented products. In this work, EPS production by two Lactobacillus suebicus strains, which were isolated from ropy ciders, was examined in a semidefined medium. The existence of priming glycosyltransferase encoding genes was detected by PCR. In addition, the preliminary characterization of the polymers was undertaken. Molecular masses were determined by size exclusion chromatography revealing the presence of two peaks, corresponding to polymers of high- and low-molecular-weight in all fractions. The composition of the EPS fractions was analyzed by gas chromatography-mass spectrometry after acid hydrolysis, revealing that they contained glucose, galactose, N-acetylglucosamine and phosphate, although in different ratios, suggesting that a mixture of polysaccharides is being synthesized. We also examined the influence of the sugar source (glucose, ribose, xylose, or arabinose) and pH conditions on growth and EPS production.

Lactobacillus sicerae sp. nov., a lactic acid bacterium isolated from Spanish natural cider.

Strains CUPV261(T) and CUPV262 were isolated from ropy natural ciders of the Basque Country, Spain, in 2007. Cells are Gram-stain positive, non-spore-forming, motile rods, facultative anaerobes and catalase-negative. The strains are obligately homofermentative (final product dl-lactate) and produce exopolysaccharides from sucrose. Phylogenetic analysis based on 16S rRNA gene sequences revealed that the highest similarity to both isolates corresponded to the type strain of Lactobacillus vini (99.1 %), followed by Lactobacillus satsumensis (96.4 %), and Lactobacillus oeni (96.2 %), and for all other established species, 16S rRNA gene sequence similarities were below 96 %. The species delineation of strains CUPV261(T) and CUPV262 was evaluated through RAPD fingerprinting. In addition, a random partial genome pyrosequencing approach was performed on strain CUPV261(T) in order to compare it with the genome sequence of Lactobacillus vini DSM 20605(T) and calculate indexes of average nucleotide identity (ANI) between them. Results permit the conclusion that strains CUPV261(T) and CUPV262 represent a novel species of the genus Lactobacillus, for which the name Lactobacillus sicerae sp. nov. is proposed. The type strain is CUPV261(T) ( = CECT 8227(T) = KCTC 21012(T)).

Comparative analysis of production and purification of homo- and hetero-polysaccharides produced by lactic acid bacteria.

Lactic acid bacteria (LAB) produce homopolysaccharides (HoPS) and heteropolysaccharides (HePS) with potential functional properties. In this work, we have performed a comparative analysis of production and purification trials of these biopolymers from bacterial culture supernatants. LAB strains belonging to four different genera, both natural as well as recombinant, were used as model systems for the production of HoPS and HePS. Two well characterized strains carrying the gft gene were used for ß-glucan production, Pediococcus parvulus 2.6 (P. parvulus 2.6) isolated from cider, and the recombinant strain Lactococcus lactis NZ9000[pGTF] (L. lactis NZ9000[pGTF]). In addition, another cider isolate, Lactobacillus suebicus CUPV225 (L. suebicus CUPV225), and Leuconostoc mesenteroides RTF10 (L. mesenteroides RTF10), isolated from meat products were included in the study. Chemical analysis of the EPS revealed that L. mesenteroides produces a dextran, L. suebicus a complex heteropolysaccharide, and the ß-glucan producing-strains the expected 2-substituted (1,3)-ß-glucan.

A real-time PCR assay for detection and quantification of 2-branched (1,3)-beta-D-glucan producing lactic acid bacteria in cider.

Ropiness in natural cider is a relatively frequent alteration, mainly found after bottling, leading to consumer rejection. It is derived from the production of exopolysaccharides (EPS) by some lactic acid bacteria most of which synthesize a 2-branched (1,3)-beta-D-glucan and belong to the genera Pediococcus, Lactobacillus and Oenococcus. This polysaccharide synthesis is controlled by a single transmembrane glycosyltransferase (GTF). In this work, a method based on quantitative PCR (qPCR) and targeting the gtf gene was developed for detection and quantification of these bacteria in cider. The newly designed primers GTF3/GTF4 delimit a 151bp fragment within the 417bp amplicon previously designed for conventional PCR. The inclusivity and exclusivity of the qPCR assay were assessed with 33 cider isolates belonging to genus Lactobacillus, Oenoccocus and Pedioccocus, together with reference strains of 16 species and five genera including beta-glucan, alpha-glucan and heteropolysaccharide (HePS) producing strains and non-EPS producers. The qPCR assay, followed by the melting curve analysis, confirmed the generation of a single PCR product from the beta-glucan producers with a T(m) of 74.28+/-0.08 and C(T) values (10ng DNA) ranging between 8.46 and 16.88 (average 12.67+/-3.5). Some EPS(-) LAB strains rendered C(T) values ranging from 28.04 to 37.75 but they were significantly higher (P(C(T)<28.54)=0.05) than those of the beta-glucan producers. The assay showed a wide quantification range of 5 log units using calibrated cell suspensions of Pediococcus parvulus 2.6 and Oenococcus oeni I4. The linearity was extended over 7 log orders when calibration curves were obtained from DNA. The detection limit for beta-glucan producing LAB in artificially contaminated cider was about 3x10(2)CFU per ml. The newly developed qPCR assay was successfully applied to monitor the cidermaking process, in 13 tanks from two cider factories, revealing a decrease in C(T) values derived from an increase in beta-glucan producing LAB populations. In addition, 8 naturally spoiled bottled cider were tested for the quantification of these organisms using the five standard curves constructed: P. parvulus 2.6 genomic DNA and gtf amplicon (417bp), calibrated cell suspensions of Pediococcus parvulus 2.6, Lactobacillus diolivorans G77 and Oenococcus oeni I4 and results were compared to LAB total counts on MRS. Levels obtained from the different approaches were within a log range and showed no significant differences. Therefore, the amplicon-derived standard curve is proposed for the routine estimation of gtf(+)populations in cider.

Supramolecular structure and conformation of a (1-->3)(1-->2)-beta-D-glucan from Lactobacillus suebicus CUPV221 as observed by tapping mode atomic force microscopy.

Tapping mode atomic force microscopy (TM-AFM) has been used to analyze the supramolecular structure and conformation of the (1-->3)(1-->2)-beta-D-glucan produced by Lactobacillus suebicus CUPV221 isolated from cider. Solutions for TM-AFM observation were prepared by dispersing the solid glucan in distilled water and in alkaline aqueous solutions. It was found that from the distilled water at 10 mg/L or higher concentrations, the (1-->3)(1-->2)-beta-D-glucan forms networks. The heat resistance of the networks depends on the concentration. From the alkaline aqueous solutions, different supramolecular structures were observed depending on the pH. From the weakest alkaline solution, a fairly rough morphology with a high density of spikelike growth features was revealed. As the ionic force of the medium increased, the sizes of the spikelike growth features diminished, and even many disaggregated fibers could be found. At 0.4 M NaOH (pH 13.16), the aggregates had disappeared almost totally. NaOH aqueous solutions (0.1 and 0.4 M) were used to carry out the study of conformation. At 0.1 M NaOH, the aggregates were partially detached, and many free microfibers were found to which a helical conformation could be assigned due to their stiffness and rodlike character. At 0.4 M NaOH, the beginning of the dissociation of the helical structures was seen.

Pediococcus parvulus gtf gene encoding the GTF glycosyltransferase and its application for specific PCR detection of beta-D-glucan-producing bacteria in foods and beverages.

Exopolysaccharide production by lactic acid bacteria is beneficial in the dairy and oat-based food industries and is used to improve the texture of the fermented products. However, beta-D-glucan-producing bacteria are considered spoilage microorganisms in alcoholic beverages because their secreted exopolysaccharides alter the viscosity of cider, wine, and beer, rendering them unpalatable. The plasmidic glycosyltransferase (gtf) gene of the Pediococcus parvulus 2.6 strain isolated from ropy cider has been cloned and sequenced, and its GTF product was functionally expressed in Streptococcus pneumoniae. The GTF protein, which has glycosyltransferase activity, belongs to the COG1215 membrane-bound glycosyltransferase family, and agglutination tests revealed that the enzyme enables S. pneumoniae to synthesize beta-D-glucan. PCR amplification and Southern blot hybridization showed that the gtf gene is also present at different genomic locations in the beta-D-glucan producers Lactobacillus diolivorans G77 and Oenococcus oeni I4 strains, also isolated from ropy cider. A PCR assay has been developed for the detection of exopolysaccharide-producing bacteria. Forward and reverse primers, included respectively in the coding sequences of the putative glycosyltransferase domain and the fifth trans-membrane segment of the GTF, were designed. Analysis of 76 ropy and nonropy lactic acid bacteria validated the method for specific detection of beta-D-glucan homopolysaccharide producer Pediococcus, Lactobacillus, and Oenococcus strains. The limit of the assay in cider was 3 X 10(2) CFU/ml. This molecular method can be useful for the detection of ropy bacteria in cider before spoilage occurs, as well as for isolation of new exopolysaccharide-producing strains of industrial interest.