RESUMEN
Osteochondral damage, affecting the articular cartilage and the underlying subchondral bone, presents significant challenges in clinical treatment. Such defects, commonly seen in knee and ankle joints, vary from small localized lesions to larger defects. Current medical therapies encounter several challenges, such as donor shortages, drug side effects, high costs, and rejection problems, often resulting in only temporary relief. Highly porous emulsion-templated polymers (polyHIPEs) offer numerous potential benefits in the fabrication of scaffolds for tissue engineering and regenerative medicine. Polymeric scaffolds synthesized using a high internal phase emulsion (HIPE) technique, called PolyHIPEs, involve polymerizing a continuous phase surrounding a dispersed internal phase to form a solid, foam-like structure. A dense, porous design encourages cell ingrowth, nutrient delivery, and waste disposal from the scaffold, mimicking the cells' natural microenvironment. This study used hydroxyethyl methacrylate (HEMA) and acrylamide (AAM) polyHIPE scaffolds combined with extracellular matrix (ECM) components of the tissue, such as methacrylated hyaluronic acid (MHA) and methacrylated chondroitin sulfate (MCS), to prepare polyHIPE scaffolds. The mouse preosteoblast MC3T3-E1 cells and primary rat chondrocytes (harvested from male Wistar rats) were seeded on the scaffolds and cultured for 21 days to assess the osteogenesis and chondrogenesis in vitro. When compared to the AAM-MHA and AAM-MCS groups at day 21, scaffold groups HEMA-MHA and HEMA-MCS showed a significant rise in alkaline phosphatase (ALP) and calcium content. Chondrogenic markers such as glycosaminoglycan (GAG) and hydroxyproline were also assessed over a 21-day time point. On day 21, it was found that GAG and hydroxyproline production were considerably higher in the HEMA-MHA and HEMA-MCS scaffolds than in the AAM-MHA and AAM-MCS scaffolds. The overall studies showed that polyHIPE monolith scaffolds could favor cell adherence, survival ability, proliferation, differentiation, and ECM formation over 21 days. Thus, incorporating ECM components enhanced osteogenesis and chondrogenesis in vitro and can be further used as tissue repair models.
RESUMEN
OBJECTIVE: Targeting bacterial translocation in cirrhosis is limited to antibiotics with risk of antimicrobial resistance. This study explored the therapeutic potential of a non-absorbable, gut-restricted, engineered carbon bead adsorbent, Yaq-001 in models of cirrhosis and acute-on-chronic liver failure (ACLF) and, its safety and tolerability in a clinical trial in cirrhosis. DESIGN: Performance of Yaq-001 was evaluated in vitro. Two-rat models of cirrhosis and ACLF, (4 weeks, bile duct ligation with or without lipopolysaccharide), receiving Yaq-001 for 2 weeks; and two-mouse models of cirrhosis (6-week and 12-week carbon tetrachloride (CCl4)) receiving Yaq-001 for 6 weeks were studied. Organ and immune function, gut permeability, transcriptomics, microbiome composition and metabolomics were analysed. The effect of faecal water on gut permeability from animal models was evaluated on intestinal organoids. A multicentre, double-blind, randomised, placebo-controlled clinical trial in 28 patients with cirrhosis, administered 4 gr/day Yaq-001 for 3 months was performed. RESULTS: Yaq-001 exhibited rapid adsorption kinetics for endotoxin. In vivo, Yaq-001 reduced liver injury, progression of fibrosis, portal hypertension, renal dysfunction and mortality of ACLF animals significantly. Significant impact on severity of endotoxaemia, hyperammonaemia, liver cell death, systemic inflammation and organ transcriptomics with variable modulation of inflammation, cell death and senescence in the liver, kidneys, brain and colon was observed. Yaq-001 reduced gut permeability in the organoids and impacted positively on the microbiome composition and metabolism. Yaq-001 regulated as a device met its primary endpoint of safety and tolerability in the clinical trial. CONCLUSIONS: This study provides strong preclinical rationale and safety in patients with cirrhosis to allow clinical translation. TRIAL REGISTRATION NUMBER: NCT03202498.
Asunto(s)
Insuficiencia Hepática Crónica Agudizada , Microbioma Gastrointestinal , Cirrosis Hepática , Humanos , Animales , Cirrosis Hepática/complicaciones , Ratones , Masculino , Microbioma Gastrointestinal/efectos de los fármacos , Método Doble Ciego , Ratas , Modelos Animales de Enfermedad , Femenino , Persona de Mediana Edad , Traslocación Bacteriana/efectos de los fármacos , Carbono/uso terapéutico , Carbono/farmacologíaRESUMEN
The increasing prevalence of bone-related diseases has raised concern about the need for an osteoinductive and mechanically stronger scaffold-based bone tissue engineering (BTE) alternative. A mineralized microenvironment, similar to the native bone microenvironment, is required in the scaffold to recruit and differentiate local mesenchymal stem cells at the bone defect site. Further, extracellular vesicles (EVs), pre-osteoblasts' secretome, contain osteoinductive cargo and have recently been exploited in bone regeneration. This work developed a cell-free and mechanically strong interpenetrating network-based scaffold for BTE by combining the action of osteoinductive EVs with a mineralized microenvironment. The MC3T3 (a pre-osteoblast cell line) is used as a source of EVs and as the target population. The optimal concentration of MC3T3-EVs was first determined to induce osteogenesis in target cells. The osteoinductive potential of the scaffold was estimated in vitro by osteogenesis-related markers like the alkaline phosphatase (ALP) enzyme and calcium content. The MC3T3-EVs cargo was also studied for osteoinductive signals such as ALP, calcium, and mRNA. The findings of this work indicated that MC3T3-EVs at a 90 µg/mL dose had significantly higher ALP activity than 0 µg/mL (1.47-fold), 10 µg/mL (1.41-fold), and 30 µg/mL (1.39-fold) EV-concentration on day 14. Further combination of the optimum dose of EVs with a mineralized microenvironment significantly enhanced ALP activity (1.5-fold) and mineralization (3.36-fold) as compared to the control group on day 7. EV cargo analysis revealed the presence of calcium, the ALP enzyme, and the mRNAs necessary for osteogenesis and angiogenesis. ALP activity was significantly boosted in the EV-containing target cells as early as day 1, and mineralization began on day 7 because MC3T3-EVs carry ALP enzymes and calcium as cargo. When osteoinductive EVs were combined with an osteoconductive mineralized microenvironment, osteogenesis was significantly enhanced in target cells at early time points. The interaction between osteoinductive EVs and the mineralized milieu facilitates the process of osteogenesis in the target cells and suggests a potential cell-free strategy for in vivo bone repair.
Asunto(s)
Vesículas Extracelulares , Osteogénesis , Diferenciación Celular , Calcio/metabolismo , Huesos , OsteoblastosRESUMEN
For over a decade, dexamethasone (DEX) has been used for bone regenerative and anti-inflammatory purposes. It has also shown promise for inducing bone regeneration by using it as component of osteoinductive differentiation medium, particularly forin vitroculture models. Despite its osteoinductive properties, its use is limited due to its associated cytotoxicity, particularly when used at higher concentrations. DEX has adverse effects when taken orally; thus, it is best to use it in a targeted manner. Even when given locally, the pharmaceutical should be distributed in a controlled manner based on the needs of the wounded tissue. However, because drug activity is assessed in two-dimensional (2D) circumstances and the target tissue is a three-dimensional (3D) structure, assessing DEX activity and dosage in a 3D milieu is critical for bone tissue development. The current review examines the advantages of a 3D approach over traditional 2D culture methods and delivery devices for controlled DEX delivery, particularly for bone repair. Further, this review explores the latest advancement and challenges in biomaterial-based therapeutic delivery approaches for bone regeneration. This review also discusses possible future biomaterial-based strategies to study efficient DEX delivery.
Asunto(s)
Células Madre Mesenquimatosas , Osteogénesis , Dexametasona , Regeneración Ósea , Materiales Biocompatibles/farmacologíaRESUMEN
One of the objectives of bone tissue engineering is to produce scaffolds that are biocompatible, osteoinductive, and mechanically equivalent to the natural extracellular matrix of bone in terms of structure and function. Reconstructing the osteoconductive bone microenvironment into a scaffold can attract native mesenchymal stem cells and differentiate them into osteoblasts at the defect site. The symbiotic relationship between cell biology and biomaterial engineering could result in composite polymers containing the necessary signals to recreate tissue- and organ-specific differentiation. In the current work, drawing inspiration from the natural stem cell niche to govern stem cell fate, the cell-instructive hydrogel platforms were constructed by engineering the mineralized microenvironment. This work employed two different hydroxyapatite delivery strategies to create a mineralized microenvironment in an alginate-PEGDA interpenetrating network (IPN) hydrogel. The first approach involved coating of nano-hydroxyapatite (nHAp) on poly(lactide-co-glycolide) microspheres and then encapsulating the coated microspheres in an IPN hydrogel for a sustained release of nHAp, whereas the second approach involved directly loading nHAp into the IPN hydrogel. This study demonstrate that both direct encapsulation and a sustained release approach showed enhanced osteogenesis in target-encapsulated cells; however, direct loading of nHAp into the IPN hydrogel increased the mechanical strength and swelling ratio of the scaffold by 4.6-fold and 1.14-fold, respectively. In addition, the biochemical and molecular studies revealed improved osteoinductive and osteoconductive potential of encapsulated target cells. Being less expensive and simple to perform, this approach could be beneficial in clinical settings.
Asunto(s)
Materiales Biocompatibles , Osteogénesis , Materiales Biocompatibles/farmacología , Osteogénesis/genética , Andamios del Tejido/química , Preparaciones de Acción Retardada , Simbiosis , Regeneración Ósea/fisiología , Durapatita/farmacología , Durapatita/química , Hidrogeles/farmacología , Hidrogeles/químicaRESUMEN
Cancer has recently been the second leading cause of death worldwide, trailing only cardiovascular disease. Cancer stem cells (CSCs), represented as tumor-initiating cells (TICs), are mainly liable for chemoresistance and disease relapse due to their self-renewal capability and differentiating capacity into different types of tumor cells. The intricate molecular mechanism is necessary to elucidate CSC's chemoresistance properties and cancer recurrence. Establishing efficient strategies for CSC maintenance and enrichment is essential to elucidate the mechanisms and properties of CSCs and CSC-related therapeutic measures. Current approaches are insufficient to mimic the in vivo chemical and physical conditions for the maintenance and growth of CSC and yield unreliable research results. Biomaterials are now widely used for simulating the bone marrow microenvironment. Biomaterial-based three-dimensional (3D) approaches for the enrichment of CSC provide an excellent promise for future drug discovery and elucidation of molecular mechanisms. In the future, the biomaterial-based model will contribute to a more operative and predictive CSC model for cancer therapy. Design strategies for materials, physicochemical cues, and morphology will offer a new direction for future modification and new methods for studying the CSC microenvironment and its chemoresistance property. This review highlights the critical roles of the microenvironmental cues that regulate CSC function and endow them with drug resistance properties. This review also explores the latest advancement and challenges in biomaterial-based scaffold structure for therapeutic approaches against CSC chemoresistance. Since the recent entry of extracellular vesicles (EVs), cell-derived nanostructures, have opened new avenues of investigation into this field, which, together with other more conventionally studied signaling pathways, play an important role in cell-to-cell communication. Thus, this review further explores the subject of EVs in-depth. This review also discusses possible future biomaterial and biomaterial-EV-based models that could be used to study the tumor microenvironment (TME) and will provide possible therapeutic approaches. Finally, this review concludes with potential perspectives and conclusions in this area.
Asunto(s)
Vesículas Extracelulares , Neoplasias , Resistencia a Antineoplásicos/genética , Materiales Biocompatibles/uso terapéutico , Células Madre Neoplásicas/metabolismo , Células Madre Neoplásicas/patología , Microambiente Tumoral , Neoplasias/tratamiento farmacológicoRESUMEN
The secretome of mesenchymal stem cells (MSCs) is being studied for its regenerative potential for the treatment of various disorders, including bone diseases. However, mimicking the physiological parameters of native bone could further improve MSCs' secretory profile. The proteomic analysis revealed that MSCs have a diverse secretory profile depending on the cell formats used to grow them, such as two-dimensional (2D) or three-dimensional (3D) microenvironments. Stem cells are given biochemical and biophysical stimuli in a 3D milieu that mimics in vivo situations. Compared to the gold standard monolayer culture, extracellular vesicles (EVs) released under 3D conditions improved the EV cargo numerically and qualitatively. The higher requirements of EVs in clinical trials with consistent therapeutic potential are challenging. This review discusses the impact of cell culture formats on the regenerative potential of MSCs, specifically in bone regeneration. The poor yield and heterogeneity issues have hampered the therapeutic usage of EVs. Therefore, this review further explores various engineering approaches that could enhance EVs' scalability from MSCs and their therapeutic effectiveness beyond their native utility in bone tissue regeneration. This review also highlights some of the upcoming 3D approaches/models that might be useful for the enhanced secretion of therapeutic EVs from stem cells. Finally, we discuss possible future directions and conclusions in this domain.
Asunto(s)
Vesículas Extracelulares , Células Madre Mesenquimatosas , Factores Biológicos , Osteogénesis , ProteómicaRESUMEN
The skin is one of the most essential tissues in the human body, interacting with the outside environment and shielding the body from diseases and excessive water loss. Hydrogels, decellularized porcine dermal matrix, and lyophilized polymer scaffolds have all been used in studies of skin wound repair, wound dressing, and skin tissue engineering, however, these materials cannot replicate the nanofibrous architecture of the skin's native extracellular matrix (ECM). Electrospun nanofibers are a fascinating new form of nanomaterials with tremendous potential across a broad spectrum of applications in the biomedical field, including wound dressings, wound healing scaffolds, regenerative medicine, bioengineering of skin tissue, and multifaceted drug delivery. This article reviews recent in vitro and in vivo developments in multifunctional electrospun nanofibers (MENs) for wound healing. This review begins with an introduction to the electrospinning process, its principle, and the processing parameters which have a significant impact on the nanofiber properties. It then discusses the various geometries and advantages of MEN scaffolds produced by different innovative electrospinning techniques for wound healing applications when used in combination with stem cells. This review also discusses some of the possible future nanofiber-based models that could be used. Finally, we conclude with potential perspectives and conclusions in this area.
Asunto(s)
Nanofibras , Humanos , Piel , Células Madre , Ingeniería de Tejidos/métodos , Andamios del Tejido , Cicatrización de HeridasRESUMEN
Effective and rapid regeneration of bone defects often pose substantial challenges in severe accidental injuries and disabilities occurring due to diseases and/or advanced age, especially in patients having reduced tissue regeneration competence. The success of mesenchymal stromal cell (MSC)-based research strategies in improving bone regeneration was hampered not only due to the limited knowledge of therapeutic actions of MSCs but also due to difficulties as well as expenses related to cell manufacturing and time taken for ethical approvals for clinical use of living cells and engineered tissues. The recent trend indicated that there is a shift from the direct usage of MSCs toward the application of paracrine factors and extracellular vesicles (EVs) isolated from their MSC secretome in bone tissue regeneration. This shift has directed research into the development of "cell-free" therapeutics, which could be a better alternative due to its several advantages over the use of their parental MSCs. Furthermore, accumulating evidence suggested that the 3D microenvironment influences the paracrine effects of MSCs. Although the osteogenic role of EVs has been explored recently, the current study showed, for the first time, that encapsulation of EVs along with MC3T3 cells in a 3D hydrogel-assisted culture with a distinct porous microenvironment having meso and macro (0.05-200 µm) pore size distribution resulted in an improved osteogenic response in vitro. The present work was primarily focused on investigating the influence of EVs isolated under distinct priming conditions to enhance the osteogenic potential. In addition, in the current work, the osteogenic ability of different types of EVs (microvesicles and exosomes) and total EVs isolated at different time points was also examined when encapsulated with MC3T3 cells in an alginate gel. Using various biochemical assays, such as alkaline phosphatase (ALP) production and calcium secretion, it was observed that both microvesicles and exosomes collected from MC3T3 cells independently had osteogenic potential; however, their collective activity was found to be superior. We further showed that EVs induce an early osteogenic response in MC3T3 cells as indicated by ALP and calcium secretion at a much earlier time point, compared to the controls. Our data suggested that this 3D hydrogel-assisted system provides close proximity of cells and EVs, and thus, mimics the in vivo scenario, making it clinically useful for bone tissue engineering.
Asunto(s)
Vesículas Extracelulares , Células Madre Mesenquimatosas , Regeneración Ósea , Humanos , Hidrogeles , OsteogénesisRESUMEN
Strategies involving the inclusion of cell-instructive chemical and topographical cues to smart biomaterials in combination with a suitable physical stimulus may be beneficial to enhance nerve-regeneration rate. In this regard, we investigated the surface functionalization of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV)-based electroconductive electrospun nanofibers coupled with externally applied electrical stimulus for accelerated neuronal growth potential. In addition, the voltage-dependent conductive mechanism of the nanofibers was studied in depth to interlink intrinsic conductive properties with electrically stimulated neuronal expressions. Surface functionalization was accomplished using 3-aminopropyltriethoxysilane (APTES) and 1,6-hexanediamine (HDA) as an alternative to costly biomolecule coating (e.g., collagen) for cell adhesion. The nanofibers were uniform, porous, electrically conductive, mechanically strong, and stable under physiological conditions. Surface amination boosted biocompatibility, 3T3 cell adhesion, and spreading, while the neuronal model rat PC12 cell line showed better differentiation on surface-functionalized mats compared to nonfunctionalized mats. When coupled with electrical stimulation (ES), these mats showed comparable or faster neurite formation and elongation than the collagen-coated mats with no-ES conditions. The findings indicate that surface amination in combination with ES may provide an improved strategy to faster nerve regeneration using MEH-PPV-based neural scaffolds.
Asunto(s)
Nanofibras , Animales , Neuronas , Células PC12 , Ratas , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
The effective control of microbial and metabolically derived biological toxins which negatively impact physical health remains a key challenge for the 21st century. 2-Dimensional graphene and MXene nanomaterials are relatively new additions to the field of biomedical materials with superior external surface areas suited to adsorptive remediation of biological toxins. However, relatively little is known about their physiological interactions with biological systems and, to date, no comparative biological studies have been done. This study compares titanium carbide MXene (Ti3C2Tx) in multilayered and delaminated forms with graphene variants to assess the impact of variable physical properties on cellular inflammatory response to endotoxin stimulus. No significant impact on cell metabolism or induction of inflammatory pathways leading to cell death was observed. No significant increase in markers of blood cell activation and haemolysis occurred. Whilst graphene nanoplatelets (GNP), graphene oxide (GO) and Ti3C2Tx showed insignificant antibacterial activity towards Escherichia coli, silver nanoparticle-modified GO (GO-Ag) induced bacterial cell death and at a lower dose than silver nanoparticles. All nanomaterials significantly reduced bacterial endotoxin induced THP-1 monocyte IL-8, IL-6 and TNF-α cytokine production by >99%, >99% and >80% respectively, compared to control groups. This study suggests the utility of these nanomaterials as adsorbents in blood contacting medical device applications for removal of inflammatory cytokines linked to poor outcome in patients with life-threatening infection.
Asunto(s)
Grafito , Nanopartículas del Metal , Humanos , Inflamación , Plata , TitanioRESUMEN
Osteo-odonto-keratoprostheses, incorporating dental laminate material as an anchoring skirt around a central poly(methyl methacrylate) (PMMA) optic, have been used to replace the cornea for many years. However, there are many intricacies associated with the use of autologous dental laminate material, surgical complexity and skirt erosion. Tissue engineering approaches to bone replacement may offer suitable alternatives in osteo-odonto-keratoprosthesis (OOKP) surgery. In this study, a hydrogel polymer composite was investigated as a synthetic substitute for the OOKP skirt. A novel high strength interpenetrating network (IPN) hydrogel composite with nano-crystalline hydroxyapatite (nHAp) coated poly (lactic-co-glycolic acid) PLGA microspheres was created to mimic the alveo-dental lamina by employing agarose and poly(ethylene glycol) diacrylate (PEGDA) polymers. The incorporation of nHAp coated PLGA microspheres into the hybrid IPN network provide a micro-environment similar to that of skeletal tissues and improve cellular response. Agarose was used as a first network to encapsulate keratocytes/3T3 fibroblasts and PEGDA (6000 Da) was used as a second network with varying concentrations (20 and 40 wt %) to produce a strong and biocompatible scaffold. An increased concentration of either agarose or PEG-DA and incorporation of nHAp coated PLGA microspheres led to an increase in the elastic modulus. The IPN hydrogel combinations supported the adhesion and proliferation of both fibroblast and ocular human keratocyte cell types during in in-vitro testing. The cells endured the encapsulation process into the IPN and remained viable at 1 week post-encapsulation in the presence of nHAp coated microspheres. The material did not induce significant production of inflammatory cytokine IL-6 in comparison to a positive control (p < 0.05) indicating non-inflammatory potential. The nHAp encapsulated composite IPN hydrogels are mechanically strong, cell supportive, non-inflammatory materials supporting their development as OOKP skirt substitutes using a new approach to dental laminate biomimicry in the OOKP skirt material.
Asunto(s)
Materiales Biomiméticos/química , Sustitutos de Huesos/química , Trasplante de Córnea/instrumentación , Prótesis e Implantes , Animales , Materiales Biomiméticos/farmacología , Biomineralización , Sustitutos de Huesos/farmacología , Supervivencia Celular/efectos de los fármacos , Queratocitos de la Córnea/efectos de los fármacos , Queratocitos de la Córnea/metabolismo , Citocinas/metabolismo , Durapatita/química , Durapatita/farmacología , Humanos , Hidrogeles/química , Hidrogeles/farmacología , Ratones , Células 3T3 NIH , Polietilenglicoles/química , Polietilenglicoles/farmacología , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/farmacología , Sefarosa/química , Sefarosa/farmacologíaRESUMEN
Presently donor-derived platelets used in the clinic are associated with concerns about adequate availability, expense, risk of bacterial contamination and complications due to immunological reaction. To prevail over our dependence on transfusion of donor-derived platelets, efforts are being made to generate them in vitro. Development of biomaterials that support or mimic bone marrow niche micro-environmental cues could improve the in vitro production of platelets from megakaryocytes (MKs) derived from various stem cell sources. In spite of significant advances in the production of MKs from various stem cell sources using 2D as well as 3D culture approaches in vitro and the development of biomaterials-based platelet systems, yield and quality of these platelets remains unsuitable for clinical use. Thus, in vitro production of clinically useful platelets on a large scale remains an unmet target to date. This review summarizes the most frequently used 2D and 3D approaches to generate MKs and platelets in vitro, emphasizing the importance of mimicking in vivo micro-environment. Further, this review proposes the use of interpenetrating network (IPN) biomaterial-based approach as a promising strategy for improving the generation of MK and platelets in sufficient numbers in vitro. STATEMENT OF SIGNIFICANCE: Thrombocytopenia is one of the major global health and socio-economic problems. Transfusion with donor-derived platelets (PLTs) is the only effective treatment for this condition. However, this approach is limited by factors like short shelf-life of PLTs, PLT activation, alloimmunization, risk of bacterial contamination, infection etc. In vitro generated MKs and PLTs derived from non-donor-dependent sources may help to overcome the platelet transfusion concerns. Here we have reviewed various 2D and 3D strategies used for in vitro generation of MKs and PLTs, with special emphasis on various biomaterial platforms and different physico/chemical cues being used for the purpose. We have also proposed a biomaterial-based approach of using interpenetrating network (IPN) for generating clinically relevant numbers of MKs and PLTs.
Asunto(s)
Materiales Biomiméticos/química , Plaquetas/metabolismo , Técnicas de Cultivo de Célula , Megacariocitos/metabolismo , Nicho de Células Madre , Trombopoyesis , Animales , Plaquetas/citología , Humanos , Megacariocitos/citología , Ingeniería de TejidosRESUMEN
IMPACT STATEMENT: This review discusses designing novel biomaterial-based hematopoietic stem cell (HSC) expansion strategies that would contribute to the field of hematopoiesis and also proposes possible approaches for HSC expansion using interpenetrating network hydrogels, emulsion templated polymers poly(HIPEs) (high internal phase emulsion templated polymers), and three-dimensional cell printing, which could provide optimal environment for HSC attachment, proliferation, and differentiation. These novel approaches could improve the efficacy of bone marrow transplantation and also offer new insights in the field of regenerative biology.
Asunto(s)
Materiales Biocompatibles/química , Técnicas de Cultivo de Célula/métodos , Microambiente Celular , Células Madre Hematopoyéticas/citología , Polímeros/química , Nicho de Células Madre , Ingeniería de Tejidos/métodos , Animales , Diferenciación Celular , HumanosRESUMEN
The efficacy of cell-based therapies as an alternative to autologous bone grafts requires biomaterials to localize cells at the defect and drive osteogenic differentiation. Hydrogels are ideal cell delivery vehicles that can provide instructional cues via their composition or mechanical properties but commonly lack osteoconductive components that nucleate mineral. To address this challenge, we entrapped mesenchymal stromal cells (MSCs) in a composite hydrogel based on two naturally-derived polymers (alginate and hyaluronate) containing biomineralized polymeric microspheres. Mechanical properties of the hydrogels were dependent upon composition. The presentation of the adhesive tripeptide Arginine-Glycine-Aspartic Acid (RGD) from both polymers induced greater osteogenic differentiation of ovine MSCs in vitro compared to gels formed of RGD-alginate or RGD-alginate/hyaluronate alone. We then evaluated the capacity of this construct to stimulate bone healing when transplanting autologous, culture-expanded MSCs into a surgical induced, critical-sized ovine iliac crest bone defect. At 12 weeks post-implantation, defects treated with MSCs transplanted in composite gels exhibited significant increases in blood vessel density, osteoid formation, and bone formation compared to acellular gels or untreated defects. These findings demonstrate the capacity of osteoconductive hydrogels to promote bone formation with autologous MSCs in a large animal bone defect model and provide a promising vehicle for cell-based therapies of bone healing.
Asunto(s)
Alginatos/uso terapéutico , Materiales Biocompatibles/uso terapéutico , Ácido Hialurónico/uso terapéutico , Hidrogeles/uso terapéutico , Oligopéptidos/uso terapéutico , Osteogénesis/efectos de los fármacos , Alginatos/administración & dosificación , Animales , Materiales Biocompatibles/administración & dosificación , Huesos/lesiones , Ácido Hialurónico/administración & dosificación , Hidrogeles/administración & dosificación , Inyecciones , Trasplante de Células Madre Mesenquimatosas , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de los fármacos , Oligopéptidos/administración & dosificación , OvinosRESUMEN
The wearable artificial kidney can deliver continuous ambulatory dialysis for more than 3 million patients with end-stage renal disease. However, the efficient removal of urea is a key challenge in miniaturizing the device and making it light and small enough for practical use. Here, we show that two-dimensional titanium carbide (MXene) with the composition of Ti3C2T x, where T x represents surface termination groups such as -OH, -O-, and -F, can adsorb urea, reaching 99% removal efficiency from aqueous solution and 94% from dialysate at the initial urea concentration of 30 mg/dL, with the maximum urea adsorption capacity of 10.4 mg/g at room temperature. When tested at 37 °C, we achieved a 2-fold increase in urea removal efficiency from dialysate, with the maximum urea adsorption capacity of 21.7 mg/g. Ti3C2T x showed good hemocompatibility; it did not induce cell apoptosis or reduce the metabolizing cell fraction, indicating no impact on cell viability at concentrations of up to 200 µg/mL. The biocompatibility of Ti3C2T x and its selectivity for urea adsorption from dialysate open a new opportunity in designing a miniaturized dialysate regeneration system for a wearable artificial kidney.
Asunto(s)
Soluciones para Diálisis/química , Riñones Artificiales , Diálisis Renal , Titanio/química , Urea/aislamiento & purificación , Dispositivos Electrónicos Vestibles , Adsorción , Humanos , Tamaño de la Partícula , Propiedades de Superficie , Urea/químicaRESUMEN
The purpose of this study was to prepare an electrically conducting poly[2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) based nanofibrous scaffold and to investigate the synergetic effect of nanofibre structure and electrical stimulation on neuronal growth for possible use in nerve repair. Nanofibres were produced by electrospinning of blended MEH-PPV with polycaprolactone (PCL) at a ratio of 20 : 80, 40 : 60, 50 : 50 and 60 : 40 (v/v). A better electrical conductivity was achieved by using core-sheath structured nanofibres of PCL (core) and MEH-PPV (sheath) produced using the coaxial electrospinning technique. The highest electrical conductivity was observed in the core-sheath nanofibres, while it increased with increasing concentration of MEH-PPV for the blended electrospun nanofibres. The biocompatibility of the electrospun nanofibres was confirmed by MTS and live-dead staining assays using 3T3 fibroblasts and a neuronal rat pheochromocytoma (PC12) cell line. Beta (III) tubulin immunochemistry showed that PC12 cells differentiated into sympathetic neurons on these porous and stiffer electrospun nanofibres coated with collagen I. Improved cell morphology and attachment on the collagen I coated electrospun meshes has been confirmed by SEM analysis. Significant enhancement in neurite formation and neurite outgrowth of PC12 cells on the conductive scaffolds under electrical potential of 500 mV cm-1 for 2 h day-1 suggests the potential use of these scaffolds for nerve repair.
Asunto(s)
Nanofibras/química , Poliésteres/química , Polímeros/química , Compuestos de Vinilo/química , Neoplasias de las Glándulas Suprarrenales/metabolismo , Animales , Adhesión Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Estabilidad de Medicamentos , Conductividad Eléctrica , Estimulación Eléctrica , Ratones , Células 3T3 NIH , Nanofibras/administración & dosificación , Células PC12 , Feocromocitoma/metabolismo , Poliésteres/administración & dosificación , Polímeros/administración & dosificación , Ratas , Tubulina (Proteína)/metabolismo , Compuestos de Vinilo/administración & dosificaciónRESUMEN
Whilst various remedial human monoclonal antibodies have been developed to treat the potentially life-threatening systemic complications associated with anthrax infection, an optimal and universally effective administration route has yet to be established. In the later stages of infection when antibody administration by injection is more likely to fail one possible route to improve outcome is via the use of an antibody-bound, adsorbent haemoperfusion device. We report here the development of an adsorbent macroporous polymer column containing immobilised B. anthracis exotoxin-specific antibodies, PANG (a non-glycosylated, version of a plant-produced human monoclonal antibody) and Valortim (a fully human monoclonal N-linked glycosylated antibody), for removal of anthrax protective antigen (PA) from freshly frozen human plasma and human whole blood. In addition, we have demonstrated that continuous extracorporeal blood recirculation through a Valortim-bound haemoperfusion column significantly reduced the blood plasma concentration of anthrax PA over 2 hours using an in vivo PA rat infusion model. This work provides proof-of-concept evidence to support the development of such alternative detoxification platforms.
Asunto(s)
Carbunco/terapia , Anticuerpos Monoclonales/metabolismo , Antígenos Bacterianos/aislamiento & purificación , Bacillus anthracis/metabolismo , Toxinas Bacterianas/aislamiento & purificación , Hemoperfusión/instrumentación , Adsorción , Animales , Carbunco/sangre , Anticuerpos Antibacterianos/química , Anticuerpos Antibacterianos/metabolismo , Anticuerpos Monoclonales/química , Antígenos Bacterianos/sangre , Antígenos Bacterianos/toxicidad , Toxinas Bacterianas/sangre , Toxinas Bacterianas/toxicidad , Criogeles , Modelos Animales de Enfermedad , Humanos , Porosidad , Prueba de Estudio Conceptual , RatasRESUMEN
In the present study, a conducting polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) along with a biodegradable polymer poly(ε-caprolactone) (PCL) was used to prepare an electrically conductive, biocompatible, bioactive, and biodegradable nanofibrous scaffold for possible use in neural tissue engineering applications. Core-sheath electrospun nanofibers of PCL as the core and MEH-PPV as the sheath, were surface-functionalized with (3-aminopropyl) triethoxysilane (APTES) and 1,6-hexanediamine to obtain amine-functionalized surface to facilitate cell-biomaterial interactions with the aim of replacing the costly biomolecules such as collagen, fibronectin, laminin, and arginyl-glycyl-aspartic acid (RGD) peptide for surface modification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the formation of core-sheath morphology of the electrospun nanofibers, whereas Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed successful incorporation of amine functionality after surface functionalization. Adhesion, spreading, and proliferation of 3T3 fibroblasts were enhanced on the surface-functionalized electrospun meshes, whereas the neuronal model rat pheochromocytoma 12 (PC12) cells also adhered and differentiated into sympathetic neurons on these meshes. Under a constant electric field of 500 mV for 2 h/day for 3 consecutive days, the PC12 cells displayed remarkable improvement in the neurite formation and outgrowth on the surface-functionalized meshes that was comparable to those on the collagen-coated meshes under no electrical signal. Electrical stimulation studies further demonstrated that electrically stimulated PC12 cells cultured on collagen I coated meshes yielded more and longer neurites than those of the unstimulated cells on the same scaffolds. The enhanced neurite growth and differentiation suggest the potential use of these scaffolds for neural tissue engineering applications.
RESUMEN
Nanoporous adsorbents are promising materials to augment the efficacy of haemodialysis for the treatment of end stage renal disease where mortality rates remain unacceptably high despite improvements in membrane technology. Complications are linked in part to inefficient removal of protein bound and high molecular weight uraemic toxins including key marker molecules albumin bound indoxyl sulphate (IS) and p-cresyl sulphate (PCS) and large inflammatory cytokines such as IL-6. The following study describes the assessment of a nanoporous activated carbon monolith produced using a novel binder synthesis route for scale up as an in line device to augment haemodialysis through adsorption of these toxins. Small and large monoliths were synthesised using an optimised ratio of lignin binder to porous resin of 1 in 4. Small monoliths showing combined significant IS, p-CS and IL-6 adsorption were used to measure haemocompatibility in an ex vivo healthy donor blood perfusion model, assessing coagulation, platelet, granulocyte, T cells and complement activation, haemolysis, adsorption of electrolytes and plasma proteins. The small monoliths were tested in a naive rat model and showed stable blood gas values, blood pressure, blood biochemistry and the absence of coagulopathies. These monoliths were scaled up to a clinically relevant size and were able to maintain adsorption of protein bound uraemic toxins IS, PCS and high molecular weight cytokines TNF-α and IL-6 over 240 min using a flow rate of 300 ml min-1 without platelet activation. The nanoporous monoliths where haemocompatible and retained adsorptive efficacy on scale up with negligible pressure drop across the system indicating potential for use as an in-line device to improve haemodialysis efficacy by adsorption of otherwise poorly removed uraemic toxins.