Identification of individual goat animals by means of near infrared spectroscopy and chemometrics analysis of commercial meat cuts.

Although the identification of animal species and muscles have been reported previously, no studies have been found on the use of NIR spectroscopy to identify individual animals from the analysis of commercial meat cuts. The aim of this study was to evaluate the use of a portable near infrared (NIR) instrument combined with classical chemometrics methods [principal component analysis (PCA) and partial least squares discriminant analysis PLS-DA)] to identify the origin of individual goat animals using the spectral signature of their commercial cut. Samples were collected from several carcasses (6 commercial cuts x 24 animals) sourced from a commercial abattoir in Queensland (Australia). The NIR spectra of the samples were collected using a portable NIR instrument in the wavelength range between 950 and 1600 nm. Overall, the PLS-DA models correctly classify 82% and 79% of the individual goat samples using either the goat rack or loin cut samples, respectively. The study demonstrated that NIR spectroscopy was able to identify individual goat animals based on the spectra properties of some of the commercial cut samples analysed (e.g. loin and rack). These results showed the potential of this technique to identify individual animals as an alternative to other laboratory methods and techniques commonly used in meat traceability.

Discrimination of lamb (Ovis aries), emu (Dromaius novaehollandiae), camel (Camelus dromedarius) and beef (Bos taurus) binary mixtures using a portable near infrared instrument combined with chemometrics.

Consumers demand safe and nutritious foods at accessible prices; where issues associated with adulteration, fraud, and provenance have become important aspects to be considered by the modern food industry. There are many analytical techniques and methods available to determine food composition and quality, including food security. Among them, vibrational spectroscopy techniques are at the first line of defence (near and mid infrared spectroscopy, and Raman spectroscopy). In this study, a portable near infrared (NIR) instrument was evaluated to identify different levels of adulteration between binary mixtures of exotic and traditional meat species. Fresh meat cuts of lamb (Ovis aries), emu (Dromaius novaehollandiae), camel (Camelus dromedarius) and beef (Bos taurus) sourced from a commercial abattoir were used to make different binary mixtures (95 % %w/w, 90 % %w/w, 50 % %w/w, 10 % %w/w and 5 % %w/w) and analysed using a portable NIR instrument. The NIR spectra of the meat mixtures was analysed using principal component analysis (PCA), and partial least squares discriminant analysis (PLS-DA). Two isosbestic points corresponding to absorbances at 1028 nm and 1224 nm were found to be consistent across all the binary mixtures analysed. The coefficient of determination in cross validation (R2) obtained for the determination of the per cent of species in a binary mixture was above 90 % with a standard error in cross validation (SECV) ranging between 12.6 and 15 %w/w. Overall, the results of this study indicate that NIR spectroscopy can determine the level or ratio of adulteration in the binary mixtures of minced meat.

Recent advances on mycotic keratitis caused by dematiaceous hyphomycetes.

Dematiaceous hyphomycetes (DH) are darkly pigmented fungi ubiquitously found all over the world as plant pathogens and saprophytes, and many of the members of this group have emerged as opportunistic pathogens. These fungi are responsible for a wide variety of infections including mycotic keratitis, which is considered as one of the major causes of corneal blindness, particularly in tropical and subtropical countries with an annual global burden of about 1 000 000 patients. The infection is more common in workers working in an outdoor environment. Moreover, trauma is found to be the most important predisposing cause of mycotic keratitis. Considerable delay in diagnosis and scarcity of effective pharmacological drugs are the major factors responsible for increased morbidity and visual impairment. Considering the crucial role of DH in mycotic keratitis, in the present review, we have focused on major DH with special emphasis on their pathogenicity, diagnosis and treatment strategies.

Design of Novel Drug-like Molecules Using Informatics Rich Secondary Metabolites Analysis of Indian Medicinal and Aromatic Plants.

BACKGROUND: Several medicinal plants are being used in Indian medicine systems from ancient times. However, in most cases, the specific molecules or the active ingredients responsible for the medicinal or therapeutic properties are not yet known. OBJECTIVE: This study aimed to report a computational protocol as well as a tool for generating novel potential drug candidates from the bioactive molecules of Indian medicinal and aromatic plants through the chemoinformatics approach. METHODS: We built a database of the Indian medicinal and aromatic plants coupled with associated information (plant families, plant parts used for the medicinal purpose, structural information, therapeutic properties, etc.) We also developed a Java-based chemoinformatics open-source tool called DoMINE (Database of Medicinally Important Natural products from plantaE) for the generation of virtual library and screening of novel molecules from known medicinal plant molecules. We employed chemoinformatics approaches to in-silico screened metabolites from 104 Indian medicinal and aromatic plants and designed novel drug-like bioactive molecules. For this purpose, 1665 ring containing molecules were identified by text mining of literature related to the medicinal plant species, which were later used to extract 209 molecular scaffolds. Different scaffolds were further used to build a focused virtual library. Virtual screening was performed with cluster analysis to predict drug-like and lead-like molecules from these plant molecules in the context of drug discovery. The predicted drug-like and lead-like molecules were evaluated using chemoinformatics approaches and statistical parameters, and only the most significant molecules were proposed as the candidate molecules to develop new drugs. RESULTS AND CONCLUSION: The supra network of molecules and scaffolds identifies the relationship between the plant molecules and drugs. Cluster analysis of virtual library molecules showed that novel molecules had more pharmacophoric properties than toxicophoric and chemophoric properties. We also developed the DoMINE toolkit for the advancement of natural product-based drug discovery through chemoinformatics approaches. This study will be useful in developing new drug molecules from the known medicinal plant molecules. Hence, this work will encourage experimental organic chemists to synthesize these molecules based on the predicted values. These synthesized molecules need to be subjected to biological screening to identify potential molecules for drug discovery research.

Afro Middle East Asian symposium on cancer cooperation.

This manuscript captures the discussion and recommendations that came out of a special Afro Asian symposium involving 13 countries. Unmet needs and cost-effective solutions with special emphasis on training form the backbone of practical next steps.

Stresses in cement mantles of hip replacements: effect of femoral implant sizes, body mass index and bone quality.

The effects of femoral prosthetic heads of diameters 22 and 28 mm were investigated on the stability of reconstructed hemi-pelves with cement mantles of thicknesses 1-4 mm and different bone qualities. Materialise medical imaging package and I-Deas finite element (FE) software were used to create accurate geometry of a hemi-pelvis from CT-scan images. Our FE results show an increase in cement mantle stresses associated with the larger femoral head. When a 22 mm femoral head is used on acetabulae of diameters 56 mm and above, the probability of survivorship can be increased by creating a cement mantle of at least 1 mm thick. However, when a 28 mm femoral head is used, a cement mantle thickness of at least 4 mm is needed. Poor bone quality resulted in an average 45% increase in the tensile stresses of the cement mantles, indicating resulting poor survivorship rate.

Configuration of anchorage holes affects fixation of the acetabular component in cemented total hip replacement--a finite element study.

Our survey of current practice among UK orthopaedic surgeons shows wide variations in fixation techniques. The aim of this study, is to investigate the effect of drilling different configurations of anchorage holes in the acetabulum on implant stability. To avoid variables that could incur during in vitro testing, we used commercially available COSMOS finite element analysis package to investigate the stress distributions, deformations, and strains on the cement mantle when drilling three large anchorage holes and six smaller ones, with straight and rounded cement pegs. The results, which are in line with our in vitro studies on simulated reconstructed acetabulae, indicate better stability of the acetabular component when three larger holes than six smaller holes are drilled and when the necks of the anchorage holes are rounded. The longevity of total hip replacements could be improved by drilling three large anchorage holes, rather than many smaller ones, as initially proposed by Charnley.

Total hip replacement. Results of a postal survey of current practice on the cement fixation of the acetabular cup in the uk.

Previous finite element studies and laboratory investigations on reconstructed acetabulum joints show that long-term fixation of the acetabular cup in total hip replacements (THRs) is influenced by surgical fixation techniques. The aim of this study is to determine and understand the reasons of current practice in the cement fixation of the acetabular cup in THRs in the UK. Following a pilot study, a postal survey was carried out among 1350 orthopaedic consultants. Response rate was 40% and data obtained from the returned questionnaires provided information about the current practice of 431 consultants with an average of 16.5 years of experience and who perform an average of 55 cemented THR operations annually. The survey showed wide variations in the fixation methods of the acetabular component. 95% of the respondents use cement to fix the acetabular cup, 46% maintain the subchondral bone and 63% use a flanged acetabular cup. The numbers of anchorage holes drilled vary from zero to thirty-six and drill diameters vary from 2 to 15 mm. Anchorage hole depths vary from 3 to 20 mm. Given the variability of surgical fixation methods, further studies need to be carried out to determine how fixation techniques could be improved to increase the longevity of the acetabular component in THRs. Further investigations could lead to a better understanding of the factors that contribute to the stability of THRs. (Hip International 2004; 14: 155-62).

Fixation of the acetabular cup in cemented total hip replacement: improving the anchorage hole profile using finite element method.

Long-term studies have shown that failure of the acetabular component in total hip replacement increases exponentially ten years following surgery and occurs mostly at the bone-cement interface. During the cemented fixation of the acetabular cup, straight anchorage holes, 3-15 mm diameter and 3-20 mm deep, are drilled in the acetabulum in order to increase torsional resistance at the bone-cement interface. The aim of this paper is to provide guidelines for improving the profile of anchorage holes. Results from our finite element models show that the efficiency of anchorage holes may be improved if they are drilled perpendicularly to the acetabulum floor and if they have chamfered necks. A 10 degree inclination of the anchorage hole increases Von Mises stress in the cement mantle by 6% while creating chamfered anchorage holes, instead of straight holes, decreases it by 14%. Increasing depth of anchorage holes does not improve efficiency.

Cement-within-cement revision hip arthroplasty; should it be done?

The complete removal of the cement mantle at revision arthroplasty can be extremely difficult. Some authors advise a 'cement-within-cement' revision technique in which a new layer of cement is applied to the old before insertion of the femoral component. We could find no long-term clinical data regarding the success of this procedure. In a simple biomechanical study, we examined the strength of the cement-to-cement interface in conditions likely to prevail in vivo. We found that the presence of a thin layer of blood and marrow debris at the interface weakened the cement-to-cement bond by 80% to 85%. These biomechanical findings and additional photomicrographic evidence do not support the practice of cement-within-cement revision arthroplasty.

Orthopaedic bone drills-can they be improved? Temperature changes near the drilling face.

We studied the various drill bits available for engineering purposes, and compared them with standard orthopaedic drill bits, using continuous temperature recording at 0.5 mm, 1.0 mm and 1.5 mm from the edge of a 2.5 mm hole as it was drilled in fresh cadaver human tibia. We found that some commercially available drill bits performed better than their orthopaedic equivalents, producing significantly less thermal injury to the surrounding bone and halving the force required for cortical penetration. Our work suggests that the optimal bit for orthopaedic purposes should have a split point and a quick helix. Theoretical knowledge of cutting technology predicts that the addition of a parabolic flute will further reduce thermal damage. Further work is being done on other drill sizes used in orthopaedic practice and on new custom-designed bits.

Comparison of slum survey, school survey and health education as methods of detection of leprosy cases in urban area.

The present study includes the analysis of different methods of survey adopted by the Shram Mandir Trust in its urban leprosy control unit of Baroda. The results are obtained from the work of the Trust of the last decade (i.e. from 1972 to 1982). It reveals that Slum Survey (1.90/1000) has better results as compared to school survey (0.29/1000). 91 cases were detected in one year from 1-4-1981 to 31-3-1982; 38 were through slum survey (41.76%) and 37 were through health education (40.66%). (School Survey was not carried.) Thus health education has a very important place in case detection.