Development of a novel delivery quality assurance system based on simultaneous verification of dose distribution and binary multi-leaf collimator opening in helical tomotherapy.

BACKGROUND: Intensity-modulated radiation therapy (IMRT) requires delivery quality assurance (DQA) to ensure treatment accuracy and safety. Irradiation techniques such as helical tomotherapy (HT) have become increasingly complex, rendering conventional verification methods insufficient. This study aims to develop a novel DQA system to simultaneously verify dose distribution and multi-leaf collimator (MLC) opening during HT. METHODS: We developed a prototype detector consisting of a cylindrical plastic scintillator (PS) and a cooled charge-coupled device (CCD) camera. Scintillation light was recorded using a CCD camera. A TomoHDA (Accuray Inc.) was used as the irradiation device. The characteristics of the developed system were evaluated based on the light intensity. The IMRT plan was irradiated onto the PS to record a moving image of the scintillation light. MLC opening and light distribution were obtained from the recorded images. To detect MLC opening, we placed a region of interest (ROI) on the image, corresponding to the leaf position, and analyzed the temporal change in the light intensity within each ROI. Corrections were made for light changes due to differences in the PS shape and irradiation position. The corrected light intensity was converted into the leaf opening time (LOT), and an MLC sinogram was constructed. The reconstructed MLC sinogram was compared with that calculated using the treatment planning system (TPS). Light distribution was obtained by integrating all frames obtained during IMRT irradiation. The light distribution was compared with the dose distribution calculated using the TPS. RESULTS: The LOT and the light intensity followed a linear relationship. Owing to MLC movements, the sensitivity and specificity of the reconstructed sinogram exceeded 97%, with an LOT error of - 3.9 ± 7.8%. The light distribution pattern closely resembled that of the dose distribution. The average dose difference and the pass rate of gamma analysis with 3%/3 mm were 1.4 ± 0.2% and 99%, respectively. CONCLUSION: We developed a DQA system for simultaneous and accurate verification of both dose distribution and MLC opening during HT.

Risk factors for radiotherapy incidents: a single institutional experience.

We aimed to analyze risk factors for incidents occurring during the practice of external beam radiotherapy (EBRT) at a single Japanese center. Treatment data for EBRT from June 2014 to March 2017 were collected. Data from incident reports submitted during this period were reviewed. Near-miss cases were not included. Risk factors for incidents, including patient characteristics and treatment-related factors, were explored using uni- and multivariate analyses. Factors contributing to each incident were also retrospectively categorized according to the recommendations of the American Association of Physicists in Medicine (AAPM). A total of 2887 patients were treated during the study period, and 26 incidents occurred (0.90% per patient). Previous history of radiotherapy and large fraction size were identified as risk factors for incidents by univariate analysis. Only previous history of radiotherapy was detected as a risk factor in multivariate analysis. Identified categories of contributing factors were human behavior (50.0%), communication (40.6%), and technical (9.4%). The incident rate of EBRT was 0.90% per patient in our institution. Previous history of radiotherapy and large fraction size were detected as risk factors for incidents. Human behavior and communication errors were identified as contributing factors for most incidents.

Practical use of a plastic scintillator for quality assurance of electron beam therapy.

Quality assurance (QA) of clinical electron beams is essential for performing accurate and safe radiation therapy. However, with advances in radiation therapy, QA has become increasingly labor-intensive and time-consuming. In this paper, we propose a tissue-equivalent plastic scintillator for quick and easy QA of clinical electron beams. The proposed tool comprises a plastic scintillator plate and a charge-coupled device camera that enable the scintillation light by electron beams to be recorded with high sensitivity and high spatial resolution. Further, the Cerenkov image is directly subtracted from the scintillation image to discriminate Cerenkov emissions and accurately measure the dose profiles of electron beams with high spatial resolution. Compared with conventional methods, discrepancies in the depth profile improved from 7% to 2% in the buildup region via subtractive corrections. Further, the output brightness showed good linearity with dose, good reproducibility (deviations below 1%), and dose rate independence (within 0.5%). The depth of 50% dose measured with the tool, an index of electron beam quality, was within ±0.5 mm of that obtained with an ionization chamber. Lateral brightness profiles agreed with the lateral dose profiles to within 4% and no significant improvement was obtained using Cerenkov corrections. Field size agreed to within 0.5 mm with those obtained with ionization chamber. For clinical QA of electron boost treatment, a disk scintillator that mimics the shape of a patient's breast is applied. The brightness distribution and dose, calculated using a treatment planning system, was generally acceptable for clinical use, except in limited zones. Overall, the proposed plastic scintillator plate tool efficiently performs QA for electron beam therapy and enables simultaneous verification of output constancy, beam quality, depth, and lateral dose profiles during monthly QAs at lower doses of irradiation (small monitor units, MUs).

Estimation of Background Radiation from e-LINAC for Direct Confirmation of Irradiated Area by Utilizing the Annihilation Photons.

In radiation therapy, there is no suitable method to confirm either the three-dimensional irradiated area or the absorbed dose during irradiation. If there were such a method it would allow verification of the absorbed dose as well as help to avoid extraneous irradiation. We previously proposed a method utilizing annihilation photons generated by therapeutic photon beams to measure the irradiated area directly during irradiation. In the present study, we designed and fabricated a fast YAP:Ce scintillation counter which uses a compact photosensor to measure annihilation photons. The energy resolution and detection efficiency were obtained experimentally using a (22)Na planar source. We measured count rates of background radiation by using the detector and estimated those of background radiation from an e-LINAC by correcting for detection efficiency. The obtained energy resolution of the YAP:Ce scintillation detector was 12.16+/-3.5% and its detection efficiency was 28.36+/-5.3%. The counting rates of background radiation from e-LINAC were approximately from 10(8) to 10(9) cps, and were proportional to the e-LINAC dose rate. Our developed detector had a high sensitivity, good time resolution and compact size which allows for easy radiation shielding. Therefore, we concluded that it was both practical and effective for the measurement of the position-distribution of annihilation photons.