Kaolin Clay-Based Geopolymer for Ionic Thermoelectric Energy Harvesting.

Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer's channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from -182 to 42 µV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications.

Cool Concrete Incorporating Carbonated Periwinkle Shell: A Sustainable Solution for Mitigating Urban Heat Island Effects.

The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation.

Consecutive Single-Crystal-to-Single-Crystal Isomerization of Novel Octamolybdate Anions within a Microporous Hybrid Framework with Robust Water Sorption Properties.

The 3D hybrid framework [{Cu(cyclam)}3 (κ-Mo8 O27 )] ⋅ 14H2 O (1) (cyclam=1,4,8,11-tetraazacyclotetradecane) undergoes sequential single-crystal-to-single-crystal transformations upon heating to afford two different anhydrous phases (2 a and 3 a). These transitions modify the framework dimensionality and enable the isomerization of κ-octamolybdate (κ-Mo8 ) anions into λ (2 a) and µ (3 a) forms through metal migration. Hydration of 3 a involves condensation of one water molecule to the cluster to afford the γ-Mo8 isomer in 4, which dehydrates back into 3 a through the 6 a intermediate. In contrast, 2 a reversibly hydrates to form 5, exhibiting the same Mo8 cluster as that of 1. It is remarkable that three of the Mo8 clusters (κ, λ and µ) are new and that up to three different microporous phases can be isolated from 1 (2 a, 3 a, and 6 a). Water vapor sorption analyses show high recyclability and the highest uptake values for POM-based systems. The isotherms display an abrupt step at low humidity level desirable for humidity control devices or water harvesting in drylands.

Toward Long-Term-Dispersible, Metal-Free Single-Chain Nanoparticles.

We report herein on a new platform for synthesizing stable, inert, and dispersible metal-free single-chain nanoparticles (SCNPs) via intramolecular metal-traceless azide-alkyne click chemistry. It is well known that SCNPs synthesized via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) often experience metal-induced aggregation issues during storage. Moreover, the presence of metal traces limits its use in a number of potential applications. To address these problems, we selected a bifunctional cross-linker molecule, sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD). DIBOD has two highly strained alkyne bonds that allow for the synthesis of metal-free SCNPs. We demonstrate the utility of this new approach by synthesizing metal-free polystyrene (PS)-SCNPs without significant aggregation issues during storage, as demonstrated by small-angle X-ray scattering (SAXS) experiments. Notably, this method paves the way for the synthesis of long-term-dispersible, metal-free SCNPs from potentially any polymer precursor decorated with azide functional groups.

Neat Protein Single-Chain Nanoparticles from Partially Denatured BSA.

The main challenge for the preparation of protein single-chain nanoparticles (SCNPs) is the natural complexity of these macromolecules. Herein, we report the suitable conditions to produce "neat" bovine serum albumin (BSA) single-chain nanoparticles (SCNPs) from partially denatured BSA, which involves denaturation in urea and intramolecular cross-linking below the overlap concentration. We use two disuccinimide ester linkers containing three and six methylene spacer groups: disuccinimidyl glutarate (DSG) and disuccinimidyl suberate (DSS), respectively. Remarkably, the degree of internal cross-linking can be followed simply and efficiently via 1H NMR spectroscopy. The associated structural changes-as probed by small-angle neutron scattering (SANS)-reveal that the denatured protein has a random-like coil conformation, which progressively shrinks with the addition of DSG or DSS, thus allowing for size control of the BSA-SCNPs with radii of gyration down to 5.4 nm. The longer cross-linker exhibits slightly more efficiency in chain compaction with a somewhat stronger size reduction but similar reactivity at a given cross-linker concentration. This reliable method is applicable to a wide range of compact proteins since most proteins have appropriate reactive amino acids and denature in urea. Critically, this work paves the way to the synthesis of "neat", biodegradable protein SCNPs for a range of applications including nanomedicine.

High magnetization FeCo nanoparticles for magnetorheological fluids with enhanced response.

We present results concerning the fabrication of a new magnetorheological fluid with FeCo magnetic nanoparticles (NPs) as magnetic fillers. These NPs have been fabricated by using the chemical reduction technique and show a pure crystalline phase with size ranging among 30-50 nm and high magnetization, 212 ± 2 A m2 kg-1. They agglomerate due to the strong magnetic dipolar interaction among them. These FeCo nanoparticles were used to synthesize a magnetorheological fluid by using oleic acid as surfactant, mineral oil as carrier liquid and Aerosil 300 as additive to control the viscosity of the fluid. The synthesized fluid showed a strong magnetorheological response with increasing shear stress values as the magnetic field intensity increases. Thus, we have measured a superior performance up to 616.7 kA m-1, with a yield stress value of 2729 Pa, and good reversibility after demagnetization process. This value competes with the best ones reported in the most recent literature. We have compared the obtained results with our previous reported ones by using high magnetization Fe NPs fabricated by the electrical explosion of wire method (Fe-EEW).

Cyclic Polyethylene Glycol as Nanoparticle Surface Ligand.

Cyclic polymers behave different than linear polymers due to the lack of end groups and smaller coil dimensions. Herein, we demonstrate that cyclic polyethylene glycol (PEG) can be used as an alternative of classical linear PEG ligands for gold nanoparticle (AuNP) stabilization. We observed that the brush height of cyclic PEG on AuNPs of diameter 4.4 and 13.2 nm increases identically as that of linear brushes with (Nσ1/2)0.7 (N, number of monomers in a chain and σ, grafting density) and that cyclic brushes are more stretched than their linear analogues when compared to their unperturbed dimensions. Such structural effect and the reduced footprint diameter in cyclic brushes with the entire chain in a concentrated polymer brush regime explains the distinct response of NPs to ionic strength and temperature, respectively, compared to linear analogues. These experiments are an important step in understanding the effect of polymer brush topology on colloidal properties.

A Charge-Transfer Salt Based on Ferrocene/Ferrocenium Pairs and Keggin-Type Polyoxometalates.

A new hybrid inorganic-organometallic salt has been obtained from the reaction of the Keggin-type silicotungstate anion with ferrocene in a water/methanol mixture as a result of the partial oxidation of ferrocene molecules to ferrocenium cations. Single-crystal X-ray diffraction analysis reveals the presence of four ferrocenium (FeIII) cations and one ferrocene (FeII) molecule per plenary Keggin anion in the crystal structure of [FeIII (Cp)2]4[SiW12O40]·[FeII(Cp)2]·2CH3OH (1). Compound 1 thus constitutes the first example in the literature in which ferrocenium and ferrocene species coexist in the structure of a polyoxometalate-based salt. The two crystallographically independent ferrocenium species in the asymmetric unit of 1 exhibit different configurations: One displays an eclipsed conformation with ideal D5h symmetry, whereas the conformation in the other one is staggered D5d. The crystal packing of 1 can be best described as an organometallic sub-lattice of ferrocenium and ferrocene species linked by a network of π-π interactions that generates rectangular cavities of about 14 × 10 Å in which strings of Keggin anions and methanol molecules are hosted, further connected to each other via weak OPOM···CMeOH-OMeOH···OPOM type hydrogen bonds. The charge-transfer nature of the salt has been studied by solid-state diffuse reflectance UV-Vis spectroscopy and the presence of magnetically isolated FeIII/FeII centres has been confirmed by Mössbauer spectroscopy. A topological study carried out on all of the pristine ferrocenyl species deposited in the Cambridge Structural Database (CSD) has allowed two main conclusions to be drawn: (1) these species tend to adopt extreme conformations (either eclipsed or staggered) with less than a 15% of examples showing intermediate states and (2) the oxidation state of the iron centres can be unequivocally assigned on the basis of a close inspection of the Fe···Cp distances, which allows ferrocene neutral molecules and ferrocenium cations to be easily distinguished.

Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(ε-caprolactone) and Poly(l(d)-lactide) (c(PCL-b- PL(D)LA)).

The synthesis of symmetric cyclo poly(ε-caprolactone)-block-poly(l(d)-lactide) (c(PCL-b-PL(D)LA)) by combining ring-opening polymerization of ε-caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self-assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL-b-PDLA and PCL-b-PLLA copolymers.

trans-Di-aqua-bis-(pyridazine-3-carboxyl-ato-κ(2) N (2),O)copper(II).

In the title compound, [Cu(C5H3N2O2)2(H2O)2], the Cu(II) ion, located on an inversion center, exhibits an octa-hedral coordination geometry. The equatorial plane is defined by two trans-related N,O-bidentate pyridazine-3-carboxyl-ate ligands and the axial positions are occupied by two water mol-ecules. In the crystal, mol-ecules are connected by O-H⋯O hydrogen bonds between the water mol-ecules and the noncoordinating carboxyl-ate O atoms, forming layers parallel to the bc plane. The layers are stacked along the a axis by further O-H⋯O hydrogen bonds between the water mol-ecules and the coordinating carboxyl-ate O atoms. Weak C-H⋯O hydrogen bonds are also observed between the pyridazine rings and the water mol-ecules and between the pyridazine rings and the non-coordinating carboxyl-ate O atoms.

Copper(II) complexes of tetradentate pyridyl ligands supported on Keggin polyoxometalates: single-crystal to single-crystal transformations promoted by reversible dehydration processes.

Two new hybrid compounds constructed from Keggin type polyoxometalates and copper(II) complexes of tetradentate ligands containing amine and pyridyl groups, namely [Cu(bpmen)(H2O)][SiW12O40{Cu(bpmen)}] (1) and [SiW12O40{Cu(bpmpn)(H2O)}2]·3H2O (2) (bpmen, N,N'-dimethyl-N,N'-bis-(pyridin-2-ylmethyl)-1,2-diaminoethane; bpmpn, N,N'-dimethyl-N,N'-bis(pyridin-2-ylmethyl)-1,3-diaminopropane), have been synthesized under hydrothermal conditions and characterized by elemental analyses and infrared and Raman spectroscopy. Thermal stability of 1 and 2 has been studied by means of thermogravimetric analyses and variable temperature powder X-ray diffraction. Both compounds undergo single-crystal to single-crystal transformations promoted by reversible dehydration processes that have been followed by single-crystal X-ray diffraction. Structures of 1 and 2, and also of their corresponding anhydrous phases 1a and 2a, have been established. The layered structure of 1 shows rows of monodecorated polyanions with complex cations occupying intralamellar spaces, whereas trans-didecorated species in 2 lead to stacked honeycomb-like metal-organic layers forming channels where Keggin clusters are accommodated. Structural differences relate to changes in the complex geometry and ligand conformation when going from bpmen to bpmpn. Dehydration of 1 promotes coordination of the complex countercation and consequent formation of a cis-didecorated species in 1a, whereas changes in the structure of 2a are more subtle. Structural variations upon dehydration are reflected in the electron paramagnetic resonance spectra.

Coexistence of five different copper(II)-phenanthroline species in the crystal packing of inorganic-metalorganic hybrids based on Keggin polyoxometalates and copper(II)-phenanthroline-oxalate complexes.

Reaction of in situ generated copper(II)-monosubstituted Keggin polyoxometalates and copper(II)-phenanthroline-oxalato complexes in ammonium or rubidium acetate buffers led to the formation of the hybrid inorganic-metalorganic compounds E4[Cu(phen)(H2O)4]2[Cu4(phen)4(H2O)4(ox)3]0.6[Cu2(phen)2(H2O)4(ox)]0.4[Cu(phen)(ox)]0.8[{SiW11O39Cu(H2O)}2{Cu2(phen)2(ox)}].20H2O [E: Rb (1), NH4 (2)]. The two compounds have been characterized by means of elemental analysis, thermogravimetry, infrared and electron paramagnetic resonance spectroscopies, and magnetic susceptibility measurements, and their structures have been established by single-crystal X-ray diffraction. Both compounds are isostructural, and they contain a discrete bimolecular hybrid polyanion and several types of copper-phenanthroline complexes of variable nuclearity. The main structural features of these compounds are the presence of the new hybrid POM [{SiW11O39Cu(H2O)}2{Cu2(phen)2(mu-ox)}]10-, where the dinuclear copper-oxalato complex is sandwiched by two copper-monosubstituted POMs, and the coexistence of five different copper-phenanthroline species with nuclearities ranging from one to four.