Asunto(s)
Apéndice , Enfermedades del Ciego , Intususcepción , Neoplasias , Apéndice/diagnóstico por imagen , Apéndice/cirugía , Bario , Enfermedades del Ciego/etiología , Enfermedades del Ciego/patología , Enfermedades del Ciego/cirugía , Humanos , Intususcepción/diagnóstico por imagen , Intususcepción/etiología , Intususcepción/cirugíaRESUMEN
If a material with an odd number of electrons per unit-cell is insulating, Mott localisation may be invoked as an explanation. This is widely accepted for the layered compound 1T-TaS2, which has a low-temperature insulating phase comprising charge order clusters with 13 unpaired orbitals each. But if the stacking of layers doubles the unit-cell to include an even number of orbitals, the nature of the insulating state is ambiguous. Here, scanning tunnelling microscopy reveals two distinct terminations of the charge order in 1T-TaS2, the sign of such a double-layer stacking pattern. However, spectroscopy at both terminations allows us to disentangle unit-cell doubling effects and determine that Mott localisation alone can drive gap formation. We also observe the collapse of Mottness at an extrinsically re-stacked termination, demonstrating that the microscopic mechanism of insulator-metal transitions lies in degrees of freedom of inter-layer stacking.
RESUMEN
The chiral crystal is characterized by a lack of mirror symmetry and inversion center, resulting in the inequivalent right- and left-handed structures. In the noncentrosymmetric crystal structure, the spin and momentum of electrons are expected to be locked in the reciprocal space with the help of the spin-orbit interaction. To reveal the spin textures of chiral crystals, we investigate the spin and electronic structure in a p-type semiconductor, elemental tellurium, with the simplest chiral structure by using spin- and angle-resolved photoemission spectroscopy. Our data demonstrate that the highest valence band crossing the Fermi level has a spin component parallel to the electron momentum around the Brillouin zone corners. Significantly, we have also confirmed that the spin polarization is reversed in the crystal with the opposite chirality. The results indicate that the spin textures of the right- and left-handed chiral crystals are hedgehoglike, leading to unconventional magnetoelectric effects and nonreciprocal phenomena.
RESUMEN
Fast ignition (FI) is a promising approach for high-energy-gain inertial confinement fusion in the laboratory. To achieve ignition, the energy of a short-pulse laser is required to be delivered efficiently to the pre-compressed fuel core via a high-energy electron beam. Therefore, understanding the transport and energy deposition of this electron beam inside the pre-compressed core is the key for FI. Here we report on the direct observation of the electron beam transport and deposition in a compressed core through the stimulated Cu Kα emission in the super-penetration scheme. Simulations reproducing the experimental measurements indicate that, at the time of peak compression, about 1% of the short-pulse energy is coupled to a relatively low-density core with a radius of 70 µm. Analysis with the support of 2D particle-in-cell simulations uncovers the key factors improving this coupling efficiency. Our findings are of critical importance for optimizing FI experiments in a super-penetration scheme.
RESUMEN
The photovoltaic effect in traditional p-n junctions-where a p-type material (with an excess of holes) abuts an n-type material (with an excess of electrons)-involves the light-induced creation of electron-hole pairs and their subsequent separation, generating a current. This photovoltaic effect is particularly important for environmentally benign energy harvesting, and its efficiency has been increased dramatically, almost reaching the theoretical limit1. Further progress is anticipated by making use of the bulk photovoltaic effect (BPVE)2, which does not require a junction and occurs only in crystals with broken inversion symmetry3. However, the practical implementation of the BPVE is hampered by its low efficiency in existing materials4-10. Semiconductors with reduced dimensionality2 or a smaller bandgap4,5 have been suggested to be more efficient. Transition-metal dichalcogenides (TMDs) are exemplary small-bandgap, two-dimensional semiconductors11,12 in which various effects have been observed by breaking the inversion symmetry inherent in their bulk crystals13-15, but the BPVE has not been investigated. Here we report the discovery of the BPVE in devices based on tungsten disulfide, a member of the TMD family. We find that systematically reducing the crystal symmetry beyond mere broken inversion symmetry-moving from a two-dimensional monolayer to a nanotube with polar properties-greatly enhances the BPVE. The photocurrent density thus generated is orders of magnitude larger than that of other BPVE materials. Our findings highlight not only the potential of TMD-based nanomaterials, but also more generally the importance of crystal symmetry reduction in enhancing the efficiency of converting solar to electric power.
RESUMEN
This paper presents results of construction and operation of a persistent-mode, liquid-helium-free, small-scale prototype magnet for the development of a tabletop 1.5-T "finger" MRI system for osteoporosis screening. The prototype magnet, composed of 2 MgB2 coils, one superconducting joint, and a persistent-current switch (PCS) built from a portion of one coil, was wound with a one continuous ~80-m long unreacted and monofilament MgB2 wire and then reacted. The test magnet was charged successfully and generated the estimated target field of 1.75 T at 5 K with the proposed PCS operation. During initial persistent-mode, the field was slightly decayed due to the index dissipation of the joint; thereafter it sustained the persistent field of 1.7 T for 35 h. The test results validated the joint resistance of < 1.2 × 10-11 as well as the proposed approach involving the PCS coil circuit model.
RESUMEN
Controlled access to the border of the Mott insulating state by variation of control parameters offers exotic electronic states such as anomalous and possibly high-transition-temperature (Tc) superconductivity. The alkali-doped fullerides show a transition from a Mott insulator to a superconductor for the first time in three-dimensional materials, but the impact of dimensionality and electron correlation on superconducting properties has remained unclear. Here we show that, near the Mott insulating phase, the upper critical field Hc2 of the fulleride superconductors reaches values as high as â¼90 T-the highest among cubic crystals. This is accompanied by a crossover from weak- to strong-coupling superconductivity and appears upon entering the metallic state with the dynamical Jahn-Teller effect as the Mott transition is approached. These results suggest that the cooperative interplay between molecular electronic structure and strong electron correlations plays a key role in realizing robust superconductivity with high-Tc and high-Hc2.
RESUMEN
Chirality of materials are known to affect optical, magnetic and electric properties, causing a variety of nontrivial phenomena such as circular dichiroism for chiral molecules, magnetic Skyrmions in chiral magnets and nonreciprocal carrier transport in chiral conductors. On the other hand, effect of chirality on superconducting transport has not been known. Here we report the nonreciprocity of superconductivity-unambiguous evidence of superconductivity reflecting chiral structure in which the forward and backward supercurrent flows are not equivalent because of inversion symmetry breaking. Such superconductivity is realized via ionic gating in individual chiral nanotubes of tungsten disulfide. The nonreciprocal signal is significantly enhanced in the superconducting state, being associated with unprecedented quantum Little-Parks oscillations originating from the interference of supercurrent along the circumference of the nanotube. The present results indicate that the nonreciprocity is a viable approach toward the superconductors with chiral or noncentrosymmetric structures.
RESUMEN
We report the ultrafast dynamics of electrons and lattice in transition metal thin films (Au, Cu, and Mo) investigated by a combination of ultrafast electron diffraction (UED) and pump-probe optical methods. For a single-crystalline Au thin film, we observe the suppression of the diffraction intensity occuring in 10 ps, which direcly reflects the lattice thermalization via the electron-phonon interaction. By using the two-temperature model, the electron-phonon coupling constant (g) and the electron and lattice temperatures (Te, Tl) are evaluated from UED, with which we simulate the transient optical transmittance. The simulation well agrees with the experimentally obtained transmittance data, except for the slight deviations at the initial photoexcitation and the relaxed quasi-equilibrium state. We also present the results similarly obtained for polycrystalline Au, Cu, and Mo thin films and demonstrate the electron and lattice dynamics occurring in metals with different electron-phonon coupling strengths.
RESUMEN
An interface between an oxide and an electrolyte gives rise to various processes as exemplified by electrostatic charge accumulation/depletion and electrochemical reactions such as intercalation/decalation under electric field. Here we directly compare typical device operations of those in electric double layer transistor geometry by adopting A-site vacant perovskite WO3 epitaxial thin films as a channel material and two different electrolytes as gating agent. In situ measurements of X-ray diffraction and channel resistance performed during the gating revealed that in both the cases WO3 thin film reaches a new metallic state through multiple phase transitions, accompanied by the change in out-of-plane lattice constant. Electrons are electrostatically accumulated from the interface side with an ionic liquid, while alkaline metal ions are more uniformly intercalated into the film with a polymer electrolyte. We systematically demonstrate this difference in the electrostatic and electrochemical processes, by comparing doped carrier density, lattice deformation behavior, and time constant of the phase transitions.
RESUMEN
Second-order continuous phase transitions are characterized by symmetry breaking with order parameters. Topological orders of electrons, characterized by the topological index defined in momentum space, provide a distinct perspective for phase transitions, which are categorized as quantum phase transitions not being accompanied by symmetry breaking. However, there are still limited observations of counterparts in real space. Here we show a real-space topological phase transition in a chiral magnet MnGe, hosting a periodic array of hedgehog and antihedgehog topological spin singularities. This transition is driven by the pair annihilation of the hedgehogs and antihedgehogs acting as monopoles and antimonopoles of the emergent electromagnetic field. Observed anomalies in the magnetoresistivity and phonon softening are consistent with the theoretical prediction of critical phenomena associated with enhanced fluctuations of emergent field near the transition. This finding reveals a vital role of topology of the spins in strongly correlated systems.
RESUMEN
Magnetic skyrmions, swirling nanometric spin textures, have been attracting increasing attention by virtue of their potential applications for future memory technology and their emergent electromagnetism. Despite a variety of theoretical proposals oriented towards skyrmion-based electronics (that is, skyrmionics), few experiments have succeeded in creating, deleting and transferring skyrmions, and the manipulation methodologies have thus far remained limited to electric, magnetic and thermal stimuli. Here, we demonstrate a new approach for skyrmion phase control based on a mechanical stress. By continuously scanning uniaxial stress at low temperatures, we can create and annihilate a skyrmion crystal in a prototypical chiral magnet MnSi. The critical stress is merely several tens of MPa, which is easily accessible using the tip of a conventional cantilever. The present results offer a new guideline even for single skyrmion control that requires neither electric nor magnetic biases and consumes extremely little energy.
RESUMEN
A multichannel low-energy neutron spectrometer for down-scattered neutron (DSN) measurements in inertial confinement fusion (ICF) experiments has been developed. Our compact-size 256-channel lithium-glass-scintillator-based spectrometer has been implemented and tested in ICF experiments with the GEKKO XII laser. We have performed time calibration of the 256-channel analog-to-digital convertor system used for DSN measurements via X-ray pulse signals. We have clearly observed the DD-primary fusion neutron signal and have successfully studied the detector's impulse response. Our detector is soon to be implemented in future ICF experiments.
RESUMEN
The characteristics of oxygen-enriched liquid scintillators with very low afterglow are investigated and optimized for application to a single-hit neutron spectrometer for fast ignition experiments. It is found that 1,2,4-trimethylbenzene has better characteristics as a liquid scintillator solvent than the conventional solvent, p-xylene. In addition, a benzophenon-doped BBQ liquid scintillator is shown to demonstrate very rapid time response, and therefore has potential for further use in neutron diagnostics with fast time resolution.
RESUMEN
The valley degree of freedom of electrons is attracting growing interest as a carrier of information in various materials, including graphene, diamond and monolayer transition-metal dichalcogenides. The monolayer transition-metal dichalcogenides are semiconducting and are unique due to the coupling between the spin and valley degrees of freedom originating from the relativistic spin-orbit interaction. Here, we report the direct observation of valley-dependent out-of-plane spin polarization in an archetypal transition-metal dichalcogenide--MoS2--using spin- and angle-resolved photoemission spectroscopy. The result is in fair agreement with a first-principles theoretical prediction. This was made possible by choosing a 3R polytype crystal, which has a non-centrosymmetric structure, rather than the conventional centrosymmetric 2H form. We also confirm robust valley polarization in the 3R form by means of circularly polarized photoluminescence spectroscopy. Non-centrosymmetric transition-metal dichalcogenide crystals may provide a firm basis for the development of magnetic and electric manipulation of spin/valley degrees of freedom.
RESUMEN
Tungsten diselenide (WSe2) and related transition metal dichalcogenides exhibit interesting optoelectronic properties owing to their peculiar band structures originating from the valley degree of freedom. Although the optical generation and detection of valley polarization has been demonstrated, it has been difficult to realize active valley-dependent functions suitable for device applications. We report an electrically switchable, circularly polarized light source based on the material's valley degree of freedom. Our WSe2-based ambipolar transistors emit circularly polarized electroluminescence from p-i-n junctions electrostatically formed in transistor channels. This phenomenon can be explained qualitatively by the electron-hole overlap controlled by the in-plane electric field. Our device demonstrates a route to exploit the valley degree of freedom and the possibility to develop a valley-optoelectronics technology.
RESUMEN
We observe the elastic stiffness and ultrasonic absorption of a Skyrmion crystal in the chiral-lattice magnet MnSi. The Skyrmion crystal lattice exhibits a stiffness 3 orders of magnitude smaller than that of the atomic lattice of MnSi, being as soft as the flux line lattice in type-II superconductors. The observed anisotropic elastic responses are consistent with the cylindrical shape of the Skyrmion spin texture. Phenomenological analysis reveals that the spin-orbit coupling is responsible for the emergence of anisotropic elasticity in the Skyrmion lattice.
RESUMEN
Electron correlation often produces a variety of electrically insulating states caused by self-organization of electrons, which are particularly stable at commensurate fillings. Although collapsing such ordered states by minute external stimuli has been a key strategy toward device applications, it is difficult to access their true electronic phase boundaries due to the necessity of fine-tuning of material parameters. Here, we demonstrate the ambipolar resistance switching in Pr(1-x)Sr(x)MnO3 thin films (x = 0.5; an effectively 1/4-filled state) by quasi-continuous control of the doping level x and band-width W using gate-voltage and magnetic field, enabled by the extreme electric-field formed at the nanoscale interface generated in an electrolyte-gated transistor. An electroresistance peak with unprecedented steepness emerges on approaching a critical point in the x-W phase diagram. The technique opens a new route to Mott-insulator based transistors and to discovering singularities hitherto unnoticed in conventional bulk studies of strongly correlated electron systems.
RESUMEN
Molybdenum disulfide (MoS2) has gained attention because of its high mobility and circular dichroism. As a crucial step to merge these advantages into a single device, we present a method that electronically controls and locates p-n junctions in liquid-gated ambipolar MoS2 transistors. A bias-independent p-n junction was formed, and it displayed rectifying I-V characteristics. This p-n diode could perform a crucial role in the development of optoelectronic valleytronic devices.
RESUMEN
Upon the totally unexpected theft of the original 600 MHz HTS insert that occurred in December 2011, we were forced to examine our entire 1.3 GHz NMR Magnet program anew and determined that a combination of a 600 MHz LTS magnet and a 700 MHz HTS insert (H700) would yield a 1.3 GHz LTS/HTS magnet that meets the technical specifications consistent with economic constraints. Although this new 700 MHz HTS insert still comprises, as H600, a YBCO inner coil and a Bi2223 outer coil, it incorporates innovative design features. In addition to presenting the major design parameters of the new H700, we discuss here its key electromagnetic and mechanical issues.