A new application of avocado oil to enrich the biological activities of polycaprolactone membranes for tissue engineering.

The metabolites synthesized by plants to protect themselves serves as natural antimicrobial agents used in biomaterials. In this study, avocado oil (AO), was incorporated as a plant source and natural antimicrobial agent into polycaprolactone (PCL) membranes. The effects of varying AO ratios (25, 50, and 100 wt%.-PCL@25AO, PCL@50AO, PCL@100AO) on PCL membrane morphology, chemical structure, wettability, antimicrobial activity, and cell viabilities were investigated. It was demonstrated that the AO acts as a pore-forming agent in solvent-casted membranes. Young's modulus of the membranes varied between 602.68 and 31.92 MPa and more flexible membranes were obtained with increasing AO content. Inhibition zones of AO were recorded between 7.86 and 13.97 mm against clinically relevant microbial strains including bacteria, yeast, and fungi. Antimicrobial activity of AO was retained in PCL membranes at all ratios. Resazurin assay indicated that PCL@25AO membranes were cytocompatible with mouse fibroblast cells (L929 cell line) on day 6 showing 72.4% cell viability with respect to neat PCL membranes. Viability results were supported by scanning electron microscopy images and DAPI staining. The overall results of this study highlight the potential of PCL@25AO membranes as a biomaterial with antimicrobial properties, cytocompatibility, and mechanical strength suitable for various biomedical applications.

Biologically active sodium pentaborate pentahydrate and Hypericum perforatum oil loaded polyvinyl alcohol: chitosan membranes.

In this study, sodium pentaborate pentahydrate (NaB) and Hypericum perforatum (HP) oil were incorporated into polyvinyl alcohol (PVA) and chitosan (CH) polymer blend to obtain membranes by solution casting method. In order to see the synergistic effects of NaB and HP oil on the biological and physical properties of the membranes NaB and HP oil were incorporated into membrane matrix in different ratios. Fourier-transform infrared spectroscopy (FTIR) results showed that no significant bond formation between the bioactive components and the PVA:CH matrix. According to mechanical test results, Young's Modulus and elongation at break decreased from 426 MPa to 346 MPa and 52.23 % to 15.11 % for neat PVA:CH membranes and NaB and HP oil incorporated PVA:CH (PVA:CH@35NaB:HP) membranes, respectively. Antimicrobial activity tests have shown the membranes were over 99 % effective against Escherichia coli, Staphylococcus aureus, and Candida albicans, underlining their potential for infection control. Cytocompatibility assay performed with Human Dermal Fibroblast (HDFa) cells highlight the biocompatibility of the membranes, revealing 74.84 % cell viability after 72 h. The properties of NaB and HP oil doped PVA:CH based membranes obtained from these experiments reveal the promise of a versatile membrane for applications in wound healing, tissue engineering and other biomedical fields.

Melissa officinalisessential oil loaded polycaprolactone membranes: evaluation of antimicrobial activities and cytocompatibility for tissue engineering applications.

Antimicrobial biomaterials play important role in tissue engineering applications to protect damaged tissue from infections. The aim of this study is producing antimicrobial polycaprolactone (PCL) membranes by using a plant based antimicrobial agent. Therefore,Melissa officinalisessential oil (MEO) was investigated against ten types of microorganisms and remarkable antimicrobial activity was demonstrated. PCL:MEO membranes were prepared by solvent casting method by mixing MEO into PCL in various ratios (PCL:0M, PCL:0.25M, PCL:0.5M, and PCL:1M w/w). Water contact angle measurements showed that hydrophilicity of the membranes increased with increasing concentrations of MEO from 103.44° to 83.36° for PCL:0M and PCL:1M, respectively. It was determined that there was an inverse relationship between the MEO concentration and the mechanical properties. Notable antioxidant activity of PCL/MEO membranes was exhibited by the inhibition percent of 2,2-diphenyl-1-picrylhydrazyl (DPPH) which was increased from 24.74% to 44.79% for PCL:0M and PCL:1M, respectively. The antimicrobial activity of MEO was also highly maintained in PCL membranes. For PCL/MEO membranes, at least 99.9% of microorganisms were inhibited. Cytocompatibility of the membranes were investigated by resazurin assay, scanning electron microscopy analysis and 4',6-diamidino-2-phenylindole (DAPI) staining. PCL:0.25M and PCL:0.5M membranes supported the viability of L929 cells more than 87% when compared to PCL:0M membranes on day 6. However, the viability of L929 cells on PCL:1M membranes was about 43% indicating significant decrease on cellular activity. In conclusion, PCL:0.25M and PCL:0.5M membranes with their high antimicrobial activity, acceptable mechanical properties and cytocompatible properties, they can be considered as an alternative biomaterial for tissue engineering applications.

Thermoplastic elastomers containing antimicrobial and antiviral additives for mobility applications.

The transmission of the SARS-CoV-2 coronavirus has been shown through droplets generated by infected people when coughing, sneezing, or talking in close contact. These droplets either reach the next person directly or land on nearby surfaces. The objective of this study is to develop a novel, durable, and effective disinfecting antimicrobial (antiviral, antibacterial, and antifungal) styrene-ethylene/butylene-styrene (SEBS) based thermoplastic elastomers (TPE). TPE incorporated with six different formulations was investigated for mechanical and antiviral performance. The formulations consist of a combination of zinc pyrithione (ZnPT), sodium pentaborate pentahydrate (NaB), disodium octaborate tetrahydrate (DOT), and chlorhexidine (CHX). ZnPT and DOT incorporated TPE showed a reduction of microbes such as bacteria by up to 99.99%, deactivated Adenovirus, Poliovirus, Norovirus, and reduced a strain of the coronavirus family by 99.95% in 60 min on TPE samples. Control samples had higher tensile strengths among all formulations and tensile strength decreased by around 14%, 21% and 27% for ZnPT and DOT combinations compared to control samples. The elongation at break decreased by around 7%, 9% and 12% with ZnPT and DOT combinations, where it reached minimum values of 720%, 702% and 684%, respectively. The 100% Modulus and 300% Modulus slightly increased with ZnPT and NaB combination (reaching values from 1.6 to 1.9 MPa and 2.6-2.9 MPa respectively) in comparison with control samples. The MFI also decreased with antimicrobial and antiviral additives (decreasing values from 64.8 to 43.3 g/10 min). ZnPT and NaB combination showed the lowest MFI (43.3 g/10 min) and reduced the MFI of control sample by around 33%. TPE samples containing ZnPT and DOT combination showed biocidal activity against the microorganisms tested and can be used to develop antimicrobial products for multiple touchpoints within a vehicle and micro-mobility.

Determination of antimicrobial and antiviral properties of IR3535.

Insect repellent is a substance directly applied to skin or clothing in order to repel flies, mosquitoes, ticks etc. IR3535 or Ethyl butylacetylaminopropionate (EBAAP) is a relatively new repellent which is classified as a biopesticide due to exceptional skin tolerance and overall safety. The repellency against various insect and ticks, and the low toxicity of IR3535 are well acknowledged. However, there has been no attempt to investigate the effects on microorganisms or viruses up to now. In the present study, antimicrobial activity was investigated based on disc diffusion and micro-well dilution assays. Disc diffusion assays revealed IR3535 displayed remarkable antimicrobial activity on the microorganisms tested. MIC results showed that the antifungal efficiency of IR3535 is higher with respect to its antibacterial and anticandidal efficiency. Moreover, antiviral test results revealed that IR3535 showed antiviral effects against Poliovirus and Adenovirus. This is the first study that reveals IR3535's antimicrobial and antiviral properties against a broad range of microorganisms and viruses. In consideration of the antimicrobial and antiviral properties, IR3535 is a promising agent that could be used to develop novel therapeutic approaches, new application areas and formulations in the future.

Developing Novel Antimicrobial and Antiviral Textile Products.

In conjunction with an increasing public awareness of infectious diseases, the textile industry and scientists are developing hygienic fabrics by the addition of various antimicrobial and antiviral compounds. In the current study, sodium pentaborate pentahydrate and triclosan are applied to cotton fabrics in order to gain antimicrobial and antiviral properties for the first time. The antimicrobial activity of textiles treated with 3 % sodium pentaborate pentahydrate, 0.03 % triclosan, and 7 % Glucapon has been investigated against a broad range of microorganisms including bacteria, yeast, and fungi. Moreover, modified cotton fabrics were tested against adenovirus type 5 and poliovirus type 1. According to the test results, the modified textile goods attained very good antimicrobial and antiviral properties. Thus, the results of the present study clearly suggest that sodium pentaborate pentahydrate and triclosan solution-treated textiles can be considered in the development of antimicrobial and antiviral textile finishes.

Evaluation of Antimicrobial and Antiviral Activities of Different Venoms.

BACKGROUND: Animals' venomous secretions or peptides obtained from those secretions are used in the development of new therapeutic agents. The aims of this study were to investigate antimicrobial and antiviral activity of four different venoms obtained from the frog named Bufo arenarum and the snakes Crotalus atrox, Causus rhombeatus and Naja melanoleuca. METHODS: Antimicrobial activities of the venoms tested against 9 bacteria, 1 yeast, 1 fungal species and 2 viral species based on micro-well dilution assay and antiviral assay. RESULTS: Four different venoms were examined to evaluate the antimicrobial and antiviral activity against 9 bacteria, 1 yeast and 1 fungal and 2 viral species. None of the venoms exhibited anticandidal or antifungal activity. However, all of the four venoms tested were found to have both antibacterial and antiviral activities. CONCLUSION: This is the first study demonstrating that venoms of Crotalus atrox and Bufo arenarum have antibacterial activities against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Acinetobacter baumannii, Bacillus subtilis, Aeromonas hydrophila, Aeromonas spp. Antiviral activities of 4 venoms against Poliovirus and Adenovirus were also investigated for the first time.