The oxidative and thermal stability of optimal synergistic mixture of sesame and grapeseed oils as affected by frying process.

In spite of grapeseed oil high contents of linoleic acid, its oxidative stability is relatively low, and mixing with more stable oils such as sesame oil can be a good way to improve the oxidative stability of this oil. The aim of this study was to increase the oil oxidative stability by producing an optimum formulation due to the combination of grapeseed and sesame oil. For this purpose, some of the qualitative properties of the optimum formulation were investigated during frying process. For finding the best formulation, the quantities of 0%, 25%, 50%, 75%, and 100% of sesame oil were blended with 100, 75%, 50%, 25%, and 0% of grapeseed oil. The results show that the highest percentage of fatty acid in various samples (sesame oil, grapeseed oil, and mixed formulations) is related to the linoleic acid, followed by oleic, palmitic, and stearic acid. In conclusion the addition of sesame oil to grapeseed oil increased the number of phenolic compounds, antioxidant strength, and oxidative stability of the mixed oil samples. Considering the price of the product and the importance of the nutritional quality and stability of the oil, combining 75% sesame oil and 25% grapeseed oil has the best nutritional quality and lower cost than pure sesame oil formula. After frying process, comparison of sesame and grapeseed oil different factors with national Iranian standard limits showed that the parameters of acid number and peroxide value were more than Iran's national standard, but the content of polar compounds was within the permissible content. Finally, the mixture of sesame and grapeseed oil is not suitable for long-term heating and frying.

Sugar beet pectin extracted by ultrasound or conventional heating: a comparison.

The yield and quality of sugar beet pulp pectin obtained by ultrasound-assisted extraction (UAE) were compared to those obtained by conventional heating. Extraction temperature (70-90) °C, extraction time (2-4) h and pH (1-1.5) were considered as the variables for the conventional extraction while ultrasound frequency (20-60) kHz, time (10-30) min and amplitude (60-100%) were considered as the variables for UAE. The optimal conditions for maximum yield of pectin for conventionally and ultrasonically extracted pectin were determined by the central composite design and the Box Behnken design, respectively. The optimum conditions of conventional extraction were the temperature of 90 °C, time of 4 h and pH of 1. The optimum conditions of UAE were ultrasound frequency of 20 kHz, time of 10 min, and ultrasound amplitude of 96%. Extraction using the optimized conditions of conventional heating and UAE achieved the best yield of 20.75% and 20.85%, respectively. The degree of methyl esterification, ferulic acid content and molecular weight of UAE pectin were higher than conventionally extracted pectin but the content of galacturonic acid in UAE pectin was lower than that of conventionally extracted pectin. The infrared spectra of both pectins revealed the occurrence of polysaccharide component. The pectin achieved by UAE had higher lightness value than conventionally extracted pectin, confirming its application in different products partially in bright food products. The UAE pectin possessed higher viscosity than conventionally extracted pectin. The addition of UAE pectin increased all of the DSC gelatinization parameters. Overall, UAE could be a promising scalable and economical approach to obtain pectin with unique characteristics.

Physicochemical, Thermal and Rheological Properties of Pectin Extracted from Sugar Beet Pulp Using Subcritical Water Extraction Process.

The objective of this study was to characterize the properties of pectin extracted from sugar beet pulp using subcritical water (SWE) as compared to conventional extraction (CE). The research involved advanced modeling using response surface methodology and optimization of operational parameters. The optimal conditions for maximum yield of pectin for SWE and CE methods were determined by the central composite design. The optimum conditions of CE were the temperature of 90 °C, time of 240 min, pH of 1, and pectin recovery yield of 20.8%. The optimal SWE conditions were liquid-to-solid (L/S) ratio of 30% (v/w) at temperature of 130 °C for 20 min, which resulted in a comparable yield of 20.7%. The effect of obtained pectins on viscoamylograph pasting and DSC thermal parameters of corn starch was evaluated. The contents of galacturonic acid, degree of methylation, acetylation, and ferulic acid content were higher in the pectin extracted by SWE, while the molecular weight was lower. Similar chemical groups were characterized by FTIR in both SWE and CE pectins. Color attributes of both pectins were similar. Solutions of pectins at lower concentrations displayed nearly Newtonian behavior. The addition of both pectins to corn starch decreased pasting and DSC gelatinization parameters, but increased ΔH. The results offered a promising scalable approach to convert the beet waste to pectin as a value-added product using SWE with improved pectin properties.