Trajectory, fate, and magnitude of continental microplastic loads to the inner shelf: A case study of the world's largest coastal shallow lagoon.

The Patos Lagoon estuary is a highly significant ecosystem where freshwater from a vast and densely populated area continuously flows into the Atlantic Ocean by coastal plumes, exporting not only freshwater but also sediment, nutrients, plastics, and other contaminants. In this work, numerical modeling tools together with field data were used to assess for the first time the capacity of the coastal plume to export microplastics (MPs) to the inner shelf under different hydrodynamic conditions. Two field surveys were conducted during plume events to quantify MP concentrations and validate the model approach. A bottom-up approach was employed to estimate the potential MP export from the estuary's domain to the Atlantic Ocean. MP concentration in surface plume waters ranged from 0.20 items m-3 to 1.37 items m-3, confirmed by FTIR as synthetic polymers in a 90 %, being Polypropylene (PP) and Polyethylene (PE) the most abundant in a 73 %. The accumulation pattern was observed on the plume's frontal system, consistent with simulation results. The estimated average MP potential export rate attained 9.0 million items day-1 during moderate plume events and 47.5 million items day-1 during high discharge plume events. Strong discharge events, coupled with intense northeast winds, facilitated rapid southwestward export of MPs. Conversely, moderate to weak discharge events retained MPs closer to the estuary's mouth, enabling either longer trajectories or earlier deposition. Significant MP accumulation hotspots were identified in the gyre between the jetties and Cassino beach, as well as in the saline front within the plume boundaries. These accumulation zones may function as reservoirs for MP particles, potentially posing threats to local ecosystems. Understanding these dynamics is crucial for ongoing monitoring efforts to assess potential harmful interactions over time.

Spatial distribution of anthropogenic particles and microplastics in a meso-tidal lagoon (Arcachon Bay, France): A multi-compartment approach.

Assessment of microplastic (MP) contamination is still needed to evaluate this threat correctly and tackle this issue. Here, MP contamination was assessed for a meso-tidal lagoon of the Atlantic coast (Arcachon Bay, France). Sea surface, water column, intertidal sediments and wild oysters were sampled. Five different stations were studied to assess the spatial distribution of the contamination. Two were outside of the bay and three were inside the bay (from the inlet to the back). A distinction was made between all anthropogenic particles (AP, i.e. visually sorted) and MP (i.e. plastic polymer confirmed by ATR-FTIR spectroscopy). The length of particles recovered in this study ranged between 17 µm and 5 mm. Concentration and composition in sea surface and water column samples showed spatial variations while sediment and oyster samples did not. At outside stations, the sea surface and the water column presented a blended composition regarding shapes and polymers and low to high concentrations (e.g. 0.16 ± 0.08 MP.m-3 and 561.7 ± 68.5 MP.m-3, respectively for sea surface and water column), which can be due to coastal processes and nearby input sources. The inlet station displayed a well-marked pattern only at the sea surface. High AP and MP concentrations were recorded, and fragments along with polyethylene overwhelmed (respectively 76.0 % and 73.2 %). Higher surface currents could explain this pattern. At the bay back, AP and MP concentrations were lower and fibers were mainly recorded. Weaker hydrodynamics in this area was suspected to drive this contamination profile. Overall, fragments and buoyant particles were mainly detected at the sea surface while fibers and negatively buoyant particles prevailed in other compartments. Most of the studied samples presented an important contribution of fiber-shaped particles (from 31.5 % to 94.2 %). Finally, contamination was ubiquitous as AP and MP were found at all stations in all sample types.

Low-Density Plastic Debris Dispersion beneath the Mediterranean Sea Surface.

Plastic is a widespread marine pollutant, with most studies focusing on the distribution of floating plastic debris at the sea surface. Recent evidence, however, indicates a significant presence of such low density plastic in the water column and at the seafloor, but information on its origin and dispersion is lacking. Here, we studied the pathways and fate of sinking plastic debris in the Mediterranean Sea, one of the most polluted world seas. We used a recent Lagrangian plastic-tracking model, forced with realistic parameters, including a maximum estimated sinking speed of 7.8 m/d. Our simulations showed that the locations where particles left the surface differed significantly from those where they reached the seafloor, with lateral transport distances between 119 and 282 km. Furthermore, 60% of particles deposited on the bottom coastal strip (20 km wide) were released from vessels, 20% from the facing country, and 20% from other countries. Theoretical considerations furthermore suggested that biological activities potentially responsible for the sinking of low density plastic occur throughout the water column. Our findings indicate that the responsibility for seafloor plastic pollution is shared among Mediterranean countries, with potential impact on pelagic and benthic biota.

Physical processes matters! Recommendations for sampling microplastics in estuarine waters based on hydrodynamics.

Monitoring the abundance and characteristics of microplastics in estuarine waters is crucial for understanding the fate of microplastics at the land-sea continuum, and for developing policies and legislation to mitigate associated risks. However, if protocols to monitor microplastic pollution in ocean waters or beach sediments are well established, they may not be adequate for estuarine environments, due to the complex 3D hydrodynamics. In this note, we review and discuss sampling methods and strategies in relation to the main environmental forcing, estuarine hydrodynamics, and their spatio-temporal scales of variability. We propose recommendations about when, where and how to sample microplastics to capture the most representative picture of microplastic pollution. This note opens discussions on the urgent need for standardized methods and protocols to routinely monitor microplastics in estuaries which should, at the same time, be easily adaptable to the different systems to ensure consistency and comparability of data across different studies.

The streaming of plastic in the Mediterranean Sea.

Plastic debris is a ubiquitous pollutant on the sea surface. To date, substantial research efforts focused on the detection of plastic accumulation zones. Here, a different paradigm is proposed: looking for crossroad regions through which large amounts of plastic debris flow. This approach is applied to the Mediterranean Sea, massively polluted but lacking in zones of high plastic concentration. The most extensive dataset of plastic measurements in this region to date is combined with an advanced numerical plastic-tracking model. Around 20% of Mediterranean plastic debris released every year passed through about 1% of the basin surface. The most important crossroads intercepted plastic debris from multiple sources, which had often traveled long distances. The detection of these spots could foster understanding of plastic transport and help mitigation strategies. Moreover, the general applicability and the soundness of the crossroad approach can promote its application to the study of other pollutants.

Effects of Biofilms and Particle Physical Properties on the Rising and Settling Velocities of Microplastic Fibers and Sheets.

Vertical dynamics of microplastics (MPs) in the water column are complex and not fully understood due to the diversity of environmental MPs and the impact of weathering and biofouling on their dynamical properties. In this study, we investigate the effects of the particle properties and biofilm on the vertical (settling or rising) velocity of microplastic sheets and fibers under laboratory conditions. The experiments focus on three types of MPs (polyester PES fibers, polyethylene terephthalate PET sheets, and polypropylene PP sheets) of nine sizes and two degrees of biological colonization. Even though pristine PES fibers and PET sheets had a similar density, the sinking velocity of fibers was much smaller and independent of their length. The settling or rising velocity of sheets increased with the particle size up to a threshold and then decreased in the wake of horizontal oscillations in large particles. Biofilms had unexpected effects on vertical velocities. Irregular biofilm distributions can trigger motion instabilities that decrease settling velocities of sheets despite the increase in density. Biofilms can also modify the orientation of fibers, which may increase their settling velocity. Finally, we selected the most performant theoretical formulation for each type of particle and proposed modifications to consider the effect of biofilm distribution.

Assessing the potential risk and relationship between microplastics and phthalates in surface seawater of a heavily human-impacted metropolitan bay in northern China.

The impacts of microplastics (MPs) and phthalates (PAEs), a class of MP-associated contaminants, on the marine environment are not thoroughly understood despite concern over their adverse effects on humans and ecosystems. Field studies linking MPs and PAEs in seawater have not yet been reported. We investigate for the first time the correlation between MPs contamination and the presence of PAEs in the surface seawater of Jiaozhou Bay (JZB), a semi-enclosed metropolitan bay in northern China heavily impacted by human activity. The abundance of MPs, dominated by polyethylene and polyethylene terephthalate mostly smaller than 2 mm, ranged between 24.44 items/m3 and 180.23 items/m3, with the majority being black and transparent fibers and fragments. Concentrations of PAEs varied from 129.96 ng/L to 921.22 ng/L. Relatively higher abundances of MPs and higher concentrations of PAEs were generally found in areas near riverine inputs and sewage treatment plants. There was a strong correlation between PAEs concentration and MPs abundance, suggesting that they are closely linked. In a risk assessment combining PAEs and MPs, the risk quotients (RQs) indicated that the ecological risk of di-n-butyl phthalate in JZB was relatively high (0.046

A 3D numerical model to Track Marine Plastic Debris (TrackMPD): Sensitivity of microplastic trajectories and fates to particle dynamical properties and physical processes.

Numerical modelling is a key tool in understanding and determining the sources, trajectories and fates of micro-plastic debris (MPD). In this study, we introduce TrackMPD, a new modelling framework for the 3D transport of marine debris. TrackMPD fills the gaps in previous models by: (1) using a three-dimensional approach; (2) providing compatibility with a variety of ocean models; and (3) including a wide range of physical processes (advection, dispersion, windage, sinking, settling, beaching and re-floating) and MPD behaviours that depend on particle dynamical properties, and the fouling and degradation states. We implement a sensitivity analysis based on 44 scenarios to assess the relative importance of the different processes and behaviours on the MPD trajectories and fates. Results show that the MPD dynamical properties that impact their sinking, in particular plastic density and biofilm thickness and density, have the biggest effect on the MPD transport, followed by turbulent dispersion and washing-off.