Nanoengineered injectable hydrogels derived from layered double hydroxides and alginate for sustained release of protein therapeutics in tissue engineering applications.

Chronic Kidney Disease (CKD) which involves gradual loss of kidney function is characterized by low levels of a glycoprotein called Erythropoietin (EPO) that leads to red blood cell  deficiency and anemia. Recombinant human EPO (rhEPO) injections that are administered intravenously or subcutaneously is the current gold standard for treating CKD. The rhEPO injections have very short half-lives and thus demands frequent administration with a risk of high endogenous EPO levels leading to severe side effects that could prove fatal. To this effect, this work provides a novel approach of using lamellar inorganic solids with a brucite-like structure for controlling the release of protein therapeutics such as rhEPO in injectable hydrogels. The nanoengineered injectable system was formulated by incorporating two-dimensional layered double hydroxide (LDH) clay materials with a high surface area into alginate hydrogels for sustained delivery. The inclusion of LDH in the hydrogel network not only improved the mechanical properties of the hydrogels (5-30 times that of alginate hydrogel) but also exhibited a high binding affinity to proteins without altering their bioactivity and conformation. Furthermore, the nanoengineered injectable hydrogels (INHs) demonstrated quick gelation, injectability, and excellent adhesion properties on human skin. The in vitro release test of EPO from conventional alginate hydrogels (Alg-Gel) showed 86% EPO release within 108 h while INHs showed greater control over the initial burst and released only 24% of EPO in the same incubation time. INH-based ink was successfully used for 3D printing, resulting in scaffolds with good shape fidelity and stability in cell culture media. Controlled release of EPO from INHs facilitated superior angiogenic potential in ovo (chick chorioallantoic membrane) compared to Alg-Gel. When subcutaneously implanted in albino mice, the INHs formed a stable gel in vivo without inducing any adverse effects. The results suggest that the proposed INHs in this study can be utilized as a minimally invasive injectable platform or as 3D printed patches for the delivery of protein therapeutics to facilitate tissue regeneration.

Modulation of bioactive calcium phosphate micro/nanoparticle size and shape during in situ synthesis of photo-crosslinkable gelatin methacryloyl based nanocomposite hydrogels for 3D bioprinting and tissue engineering.

BACKGROUND: The gelatin-methacryloyl (GelMA) polymer suffers shape fidelity and structural stability issues during 3D bioprinting for bone tissue engineering while homogeneous mixing of reinforcing nanoparticles is always under debate. METHOD: In this study, amorphous calcium phosphates micro/nanoparticles (CNP) incorporated GelMA is synthesized by developing specific sites for gelatin structure-based nucleation and stabilization in a one-pot processing. The process ensures homogenous distribution of CNPs while different concentrations of gelatin control their growth and morphologies. After micro/nanoparticles synthesis in the gelatin matrix, methacrylation is carried out to prepare homogeneously distributed CNP-reinforced gelatin methacryloyl (CNP GelMA) polymer. After synthesis of CNP and CNP GelMA gel, the properties of photo-crosslinked 3D bioprinting scaffolds were compared with those of the conventionally fabricated ones. RESULTS: The shape (spindle to spherical) and size (1.753 µm to 296 nm) of the micro/nanoparticles in the GelMA matrix are modulated by adjusting the gelatin concentrations during the synthesis. UV cross-linked CNP GelMA (using Irgacure 2955) has significantly improved mechanical (three times compressive strength), 3D printability (160 layers, 2 cm self-standing 3D printed height) and biological properties (cell supportiveness with osteogenic differentiation). The photo-crosslinking becomes faster due to better methacrylation, facilitating continuous 3D bioprinting or printing. CONCLUSION: For 3D bioprinting using GelMA like photo cross-linkable polymers, where structural stability and homogeneous control of nanoparticles are major concerns, CNP GelMA is beneficial for even bone tissue regeneration within short period.

Manufacturing of self-standing multi-layered 3D-bioprinted alginate-hyaluronate constructs by controlling the cross-linking mechanisms for tissue engineering applications.

Three-dimensional (3D) bioprinting of self-supporting stable tissue and organ structure is critically important in extrusion-based bioprinting system, especially for tissue engineering and regenerative medicine applications. However, the development of self-standing bioinks with desired crosslinking density, biocompatibility, tunable mechanical strength and other properties like self-healing,in situgelation, drug or protein incorporation is still a challenge. In this study, we report a hydrogel bioink prepared from alginate (Alg) and hyaluronic acid (HA) crosslinked through multiple crosslinking mechanisms, i.e. acyl-hydrazone, hydrazide interactions and calcium ions. These Alg-HA gels were highly dynamic and shear-thinning with exceptional biocompatibility and tunable mechanical properties. The increased dynamic nature of the gels is mainly chemically attributed to the presence of acyl-hydrazone bonds formed between the amine groups of the acyl-hydrazide of alginate and the monoaldehyde of the HA. Among the different combinations of Alg-HA gel compositions prepared, the A5H5 (Alginate-acyl-hydrazide:HA-monoaldehyde, ratio 50:50) gel showed a gelation time of ∼60 s, viscosity of ∼400 Pa s (at zero shear rate), high stability in various pH solutions and increased degradation time (>50 days) than the other samples. The A5H5 gels showed high printability with increased post-printing stability as observed from the 3D printed structures (e.g. hollow tube (∼100 layers), porous cube (∼50 layers), star, heart-in, meniscus and lattice). The scanning electron microscopy analysis of the 3D constructs and hydrogels showed the interconnected pores (∼181µm) and crosslinked networks. Further, the gels showed sustained release of 5-amino salicylic acid and bovine serum albumin. Also, the mechanical properties were tuned by secondary crosslinking via different calcium concentrations.In vitroassays confirmed the cytocompatibility of these gels, where the 3D bioprinted lattice and tubular (∼70 layers) constructs demonstrated high cell viability under fluorescence analysis. Inin vivostudies, Alg-HA gel showed high biocompatibility (>90%) and increased angiogenesis (threefolds) and reduced macrophage infiltration (twofold decrease), demonstrating the promising potential of these hydrogels in 3D bioprinting applications for tissue engineering and regenerative medicine with tunable properties.

Graphene Oxide-Reinforced Alginate Hydrogel for Controlled Release of Local Anesthetics: Synthesis, Characterization, and Release Studies.

In pain relief, lidocaine has gained more attention as a local anesthetic. However, there are several side effects that limit the use of local anesthetics. Therefore, it is hypothesized that a hydrogel system with facile design can be used for prolonged release of lidocaine. In this study, we developed a formulation comprises of sodium alginate (SA) and graphene oxide (GO) to prolong the release of lidocaine. The gelation was induced by physically crosslinking the alginate with Ca2+ ions. The formation of blank SA and GO-reinforced SA hydrogels was investigated with different concentration of Ca2+ ions. The controlled release of lidocaine hydrochloride (LH) on both hydrogel systems was studied in PBS solution. The GO-reinforced SA hydrogels exhibited more sustained release than SA hydrogels without GO. In vitro biocompatibility test in L929 fibroblast cells confirmed the non-toxic property of hydrogels. Furthermore, to prove the in-situ gelation and biodegradability of hydrogels the hydrogels were injected on mice model and confirmed the stable gel formation. The hydrogels implanted onto the subcutaneous tissue of hydrogels retained over one week. These results indicate that LH-loaded GO-reinforced SA hydrogel can be a potential biomaterial for controlled release of local anesthetics.

Mesoporous Mn-doped hydroxyapatite nanorods obtained via pyridinium chloride enabled microwave-assisted synthesis by utilizing Donax variabilis seashells for implant applications.

Manganese-doped mesoporous hydroxyapatite (MnHAp) nanorods, a bio-apatite were synthesized via pyridinium chloride mediated microwave approach using bio-waste Donax variabilis seashells to treat orthopedic infections. This is the first report on using pyridinium chloride mediated mesoporous MnHAp nanorods synthesis. Pure and Mn doped HAp samples were examined using Raman spectroscopy, X-ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) studies to confirm the prepared HAp nanorods. Furthermore, the fabrication of manganese-doped HAp was successful with the formation of a hexagonal crystal lattice without disturbing the HAp phase. It is because, at the time of synthesis, PO43- ions form an electrostatic interaction with the Mn ions. Furthermore, Mn-doped HAp samples showed a reduction in their sizes of 15, 10-15, 5-10 nm width, and 80-100, 10-15, 20-30 nm length with varied pore diameters and surface area. The pure HAp, MnHAp-1, MnHAp-2, and MnHAp-3 nanorods disclose the surface area of 39.4, 18.0, 49.2, and 80.4 m2 g-1, with a pore volume of 0.0102, 0.0047, 0.0143, and 0.0447 cm3 g-1, the corresponding pore diameter was estimated to be 6, 7, 6, and 4 nm, respectively. Moreover, antibacterial activity reveals effective bactericidal action against infections causing pathogens whereas cytotoxicity examination (MTT assay), and zebrafish results reveal their non-toxic behavior. Therefore, it is evident from the study, that rapid fabrication of mesoporous and diverse structured MnHAp nanorods could be convenient with pyridinium chloride enabled microwave-assisted method as a bactericidal biomaterial for implant applications.

Three-Dimensional Printed Design of Antibiotic-Releasing Esophageal Patches for Antimicrobial Activity Prevention.

Pharyngoesophageal defects can cause exposure to various bacterial flora and severe inflammation. We fabricated a biodegradable polycaprolactone (PCL) patch composed of both thin film and three-dimensional (3D) printed lattice, and then investigated the efficacy of pharyngoesophageal reconstruction by using 3D printed antibiotic-releasing PCL patches that inhibited early inflammation by sustained tetracycline (TCN) release from both thin PCL films and printed rods implanted in esophageal partial defects. PCL was 3D printed in lattice form on a presolution casted PCL thin film at ∼100 µm resolution. TCN was loaded onto the PCL-printed patches by 3D printing a mixture of TCN and PCL particles melted at 100°C. TCN exhibited sustained release in vitro for over 1 month. After loading TCN, the patches showed decreased tensile strength and Young's modulus, and less than 20% TCN was slowly released from the 2.5% TCN-loaded PCL patches over 150 days. Cytotoxicity tests of extract solutions from patch samples demonstrated excellent in vitro cell compatibility. Antibiotic-releasing PCL patches were then transplanted into partial esophageal defects in rats. Microcomputed tomography analysis revealed no leak of orally injected contrast agent in the entire esophagus. Tissue remodeling was examined through histological responses of M1 and M2 macrophages. In particular, the 1% and 3% TCN patch groups exhibited significant muscle layer regeneration by desmin immunostaining. Further histological and immunofluorescence analyses revealed that the 1% and 3% TCN patch groups exhibited the best esophageal regeneration according to reepithelialization, neovascularization, and elastin texture around the implanted sites. Our antibiotic-releasing patch successfully consolidates the regenerative potential of esophageal muscle and mucosa and the antibacterial activity of TCN for 3D esophageal reconstruction. Impact statement Anastomosis site leakage and necrosis after pharyngoesophageal transplantation inevitably causes mortality because the mediastinum and neck compartments become contaminated. Herein, we present antibiotic-releasing pharyngoesophageal patch that prevents saliva leakage and has an antimicrobial effect. We have demonstrated antibiotic release profile and mechanical properties for esophageal transplantation. Upon esophageal transplantation of antibiotic-releasing polycaprolactone patches, antimicrobial effects and muscle regeneration around the graft sites were clearly identified in the group containing 1% and 3% of tetracycline. The esophageal graft led to the remarkable recovery throughout reepithelialization, neovascularization, and elastin texture of around the implanted sites. We believe that current system is capable of various applications that require antibacterial in vivo.

Self-crosslinking hyaluronic acid-carboxymethylcellulose hydrogel enhances multilayered 3D-printed construct shape integrity and mechanical stability for soft tissue engineering.

One of the primary challenges in extrusion-based 3D bioprinting is the ability to print self-supported multilayered constructs with biocompatible hydrogels. The bioinks should have sufficient post-printing mechanical stability for soft tissue and organ regeneration. Here, we report on the synthesis, characterization and 3D printability of hyaluronic acid (HA)-carboxymethylcellulose (CMC) hydrogels cross-linked through N-acyl-hydrazone bonding. The hydrogel's hydrolytic stability was acquired by the effects of both the prevention of the oxidation of the six-membered rings of HA, and the stabilization of acyl-hydrazone bonds. The shear-thinning and self-healing properties of the hydrogel allowed us to print different 3D constructs (lattice, cubic and tube) of up to 50 layers with superior precision and high post-printing stability without support materials or post-processing depending on their compositions (H7:C3, H5:C5 and H3:C7). Morphological analyses of different zones of the 3D-printed constructs were undertaken for verification of the interconnection of pores. Texture profile analysis (TPA) (hardness (strength), elastic recovery, etc) and cyclic compression studies of the 3D-printed constructs demonstrated exceptional elastic properties and fast recovery after 50% strain, respectively, which have been attributed to the addition of CMC into HA. A model drug quercetin was released in a sustained manner from hydrogels and 3D constructs. In vitro cytotoxicity studies confirmed the excellent cyto-compatibility of these gels. In vivo mice studies prove that these biocompatible hydrogels enhance angiogenesis. The results indicate that controlling the key properties (e.g. self-crosslinking capacity, composition) can lead to the generation of multilayered constructs from 3D-bioprintable HA-CMC hydrogels capable of being leveraged for soft tissue engineering applications.

3D printable and injectable lactoferrin-loaded carboxymethyl cellulose-glycol chitosan hydrogels for tissue engineering applications.

In this study, carboxymethyl cellulose (CMC)-glycol chitosan (GC) hydrogel, a potential three-dimensional (3D) printing biomaterial ink for tissue engineering applications was synthesized using simple, biocompatible in situ-gelling Schiff's base reaction and ionic interactions. Different grades of hydrogels (C70G30, C50G50 and C30G70) were synthesized at physiological conditions. The oxidation of CMC and imine bond formation in the hydrogel were confirmed spectroscopically. Scanning electron microscopic images revealed the crosslinked interconnected pores in the cross-sectioned hydrogels (dried). Swelling (equilibrium: 1 h), porosity (~75%), in vitro degradation (>30 days) and thermal gravimetric analyses of the dried gels were studied. Initially, cytotoxicity assay was evaluated using mouse osteoblastic cells (MC3T3). These experiments revealed that CMC-GC gels formed stable hydrogel networks and were biocompatible. Particularly, C50G50 gels showed high printability (continuous extrusion) and post-printing stability (without secondary crosslinking). Gel 3D printing was optimized by varying the air pressure, temperature, needle size and nozzle speed, to obtain stable lattice structures (2 to 16 layers). The printed (2 and 5 layers) hydrogels showed high stability in phosphate buffer saline (PBS) solution (1 h), under UV light (1 h) and after autoclaving. The strut dimensions and porosity of the printed gels before and after the stability tests were analyzed. The hydrogel stability may be attributed to both the imine bond and ionic interaction between the cationic and anionic polymer side chains. Lactoferrin (glycoprotein) incorporated C50G50 gels showed sustained release up to 21 days in PBS (pH 7.4) solution and demonstrated increased biocompatibility (>80%) during in vitro cytotoxicity assays (MC3T3 cells and bone marrow mesenchymal stem cells) and Live/Dead assay (MC3T3 cells). A higher number of live osteoblast cells on the C50G50 hydrogels with increasing lactoferrin concentration was observed. These results show that the CMC-GC gels are promising bio-ink candidates for 3D printing and loading proteins or drugs for tissue engineering applications.

Comparative studies on thin polycaprolactone-tricalcium phosphate composite scaffolds and its interaction with mesenchymal stem cells.

BACKGROUND: Hybrid scaffolds combining biodegradable polymers and ceramic particles for control of cell adhesion and proliferation are interesting materials for tissue engineering applications. Combinations of biodegradable polymers and ceramics are to provide higher beneficial functionalities to tissue engineering scaffolds with addition of different cell specific bio-factors. Many such hybrid combinations have been reported by several researchers around the world by using various methods and solvents as well as bioactive matrix polymers to fabricate such biomaterials. However, thin hybrid scaffolds with high porosity, cell adhesion factors and biodegradability, as well as the ability to support stem cells often require tedious processes like electrospinning, freeze drying, etc. A simple method to develop porous biodegradable hybrid scaffolds with proper cell adhesion factors is still the need of the hour in tissue engineering and regenerative medicine. METHOD: Thin biodegradable poly(ε-caprolactone) (PCL) based hybrid scaffolds were developed in combination with α-tricalcium phosphate (TCP) particles, gelatin and fibronectin separately and the fabricated scaffolds were evaluated systematically using human mesenchymal stem cells (hMSCs) for tissue engineering applications. A simple modified solvent casting method combined with gas foaming process was used to develop porous thin hybrid structures and compared their properties with those of corresponding non-porous hybrid scaffolds. The TCP particles distribution, morphology, biodegradability and functional groups of the different hybrid scaffolds were analyzed using energy-dispersive X-ray spectroscopy (EDX), light microscopy/scanning electron microscopy (SEM), buffer solutions and Fourier-transform infrared spectroscopy (FTIR), respectively The cellular and tissue regeneration behaviors such as in vitro cell attachment (live/dead assay), cell proliferation (CCK-8 assay) and histological studies were performed using hMSCs. RESULTS: Thin PCL-based hybrid scaffolds were fabricated using modified solvent casting method. Homogeneous distribution of TCP particles in the scaffolds were confirmed by EDX. Cellular interactions of the hybrid scaffolds demonstrated overall higher cell adhesion, proliferation and tissue regeneration on the non-porous thin films of PCL-TCP, PCL-TCP-gelatin and PCL-TCP-fibronectin. Coating of fibronectin was remarkable in induction of cell adhesion and proliferation. CONCLUSIONS: The experimental results revealed that diversely designed PCL-TCP thin hybrid films showed high cell interaction and proliferation with hMSCs. From the results of the cell viability, attachment, proliferation and histological analyses as well as their biodegradation and coating effects, we conclude that these thin PCL-TCP hybrid films are suitable for tissue engineering applications.

Ascorbic Acid-Assisted Microwave Synthesis of Mesoporous Ag-Doped Hydroxyapatite Nanorods from Biowaste Seashells for Implant Applications.

Post-surgery implant infection is one of the most challenging issues in orthopedics and it is mainly caused by infective micro-organisms. A potential approach to overcome this issue is developing biomaterials with efficient antibacterial activity. The main intention of this present research is devoted to ascorbic acid-assisted microwave synthesis of mesoporous (silver) Ag-doped hydroxyapatite (HAp) nanorods using biowaste seashells with antibacterial properties. XRD, FTIR, and Raman spectroscopy results revealed that the synthesized nanoparticles are hexagonal crystalline HAp. Further, the silver-doped HAp was also successfully produced without affecting the HAp crystalline phase by forming electrostatic interaction with PO43- ions during the synthesis. The morphological features confirm that the pure HAp is elongated mesoporous nanorods with 20 nm width and 300-500 nm length. However, silver doped HAp nanoparticles such as AgHA-1, AgHA-2, and AgHA-3 are found to be similar mesoporous rods but with different aspect ratios in sizes of 15, 10-15, and 5-10 nm width and 80-100, 10-15, and 20-30 nm length. The BET specific surface areas were obtained as 29 ± 3, 84 ± 2, 87 ± 2, and 128 ± 3 m2 g-1, and pore diameters were 4.68, 4.18, 9.30, and 3.77 nm, respectively, for pure HA, AgHA-1, AgHA-2, and AgHA-3. Therefore, HAp nanoparticles with different dimensions and mesoporous structures could be rapidly prepared using a microwave-assisted method and ascorbic acid as a supporting material. In addition, the synthesized HAp nanoparticles are analyzed for its antibacterial and cytotoxicity studies. The antibacterial and cytotoxicity study clearly reveals that the Ag-doped HAp nanorods are efficiently antibacterial and nontoxic in nature. Hence, it is clear that the ascorbic acid-enabled microwave-assisted method will be one of the best methods for the rapid production of HAp nanoparticles with different dimensions and mesoporous structures for its application as an implant material.

Click Chemistry-Based Injectable Hydrogels and Bioprinting Inks for Tissue Engineering Applications

BACKGROUND: The tissue engineering and regenerative medicine approach require biomaterials which are biocompatible, easily reproducible in less time, biodegradable and should be able to generate complex three-dimensional (3D) structures to mimic the native tissue structures. Click chemistry offers the much-needed multifunctional hydrogel materials which are interesting biomaterials for the tissue engineering and bioprinting inks applications owing to their excellent ability to form hydrogels with printability instantly and to retain the live cells in their 3D network without losing the mechanical integrity even under swollen state. METHODS: In this review, we present the recent developments of in situ hydrogel in the field of click chemistry reported for the tissue engineering and 3D bioinks applications, by mainly covering the diverse types of click chemistry methods such as Diels–Alder reaction, strain-promoted azide-alkyne cycloaddition reactions, thiol-ene reactions, oxime reactions and other interrelated reactions, excluding enzyme-based reactions. RESULTS: The click chemistry-based hydrogels are formed spontaneously on mixing of reactive compounds and can encapsulate live cells with high viability for a long time. The recent works reported by combining the advantages of click chemistry and 3D bioprinting technology have shown to produce 3D tissue constructs with high resolution using biocompatible hydrogels as bioinks and in situ injectable forms. CONCLUSION: Interestingly, the emergence of click chemistry reactions in bioink synthesis for 3D bioprinting have shown the massive potential of these reaction methods in creating 3D tissue constructs. However, the limitations and challenges involved in the click chemistry reactions should be analyzed and bettered to be applied to tissue engineering and 3D bioinks. The future scope of these materials is promising, including their applications in in situ 3D bioprinting for tissue or organ regeneration.

Impact of silk fibroin-based scaffold structures on human osteoblast MG63 cell attachment and proliferation.

The present study was carried out to investigate the impact of various types of silk fibroin (SF) scaffolds on human osteoblast-like cell (MG63) attachment and proliferation. SF was isolated from Bombyx mori silk worm cocoons after degumming. Protein concentration in the degummed SF solution was estimated using Bradford method. Aqueous SF solution was used to fabricate three different types of scaffolds, viz, electrospun nanofiber mat, sponge, and porous film. The structures of the prepared scaffolds were characterized using optical microscopy and field emission scanning electron microscopy. The changes in the secondary structure of the proteins and the thermal behavior of the scaffolds were determined by Fourier transform infrared spectroscopy and thermo-gravimetric analysis, respectively. The biodegradation rate of scaffolds was determined by incubating the scaffolds in simulated body fluid for 4 weeks. MG63 cells were seeded on the scaffolds and their attachment and proliferation onto the scaffolds were studied. The MTT assay was carried out to deduce the toxicity of the developed scaffolds. All the scaffolds were found to be biocompatible. The amount of collagen produced by the osteoblast-like cells growing on different scaffolds was estimated.