RESUMEN
Reduced-form modeling approaches are an increasingly popular way to rapidly estimate air quality and human health impacts related to changes in air pollutant emissions. These approaches reduce computation time by making simplifying assumptions about pollutant source characteristics, transport and chemistry. Two reduced form tools used by the Environmental Protection Agency in recent assessments are source apportionment-based benefit per ton (SA BPT) and source apportionment-based air quality surfaces (SABAQS). In this work, we apply these two reduced form tools to predict changes in ambient summer-season ozone, ambient annual PM2.5 component species and monetized health benefits for multiple sector-specific emission control scenarios: on-road mobile, electricity generating units (EGUs), cement kilns, petroleum refineries, and pulp and paper facilities. We then compare results against photochemical grid and standard health model-based estimates. We additionally compare monetized PM2.5 health benefits to values derived from three reduced form tools available in the literature: the Intervention Model for Air Pollution (InMAP), Air Pollution Emission Experiments and Policy Analysis (APEEP) version 2 (AP2) and Estimating Air pollution Social Impact Using Regression (EASIUR). Ozone and PM2.5 changes derived from SABAQS for EGU scenarios were well-correlated with values obtained from photochemical modeling simulations with spatial correlation coefficients between 0.64 and 0.89 for ozone and between 0.75 and 0.94 for PM2.5. SABAQS ambient ozone and PM2.5 bias when compared to photochemical modeling predictions varied by emissions scenario: SABAQS PM2.5 changes were overpredicted by up to 46% in one scenario and underpredicted by up to 19% in another scenario; SABAQS seasonal ozone changes were overpredicted by 34% to 83%. All tools predicted total PM2.5 benefits within a factor of 2 of the full-form predictions consistent with intercomparisons of reduced form tools available in the literature. As reduced form tools evolve, it is important to continue periodic comparison with comprehensive models to identify systematic biases in estimating air pollution impacts and resulting monetized health benefits.
RESUMEN
Fast and accurate prediction of ambient ozone (O3) formed from atmospheric photochemical processes is crucial for designing effective O3 pollution control strategies in the context of climate change. The chemical transport model (CTM) is the fundamental tool for O3 prediction and policy design, however, existing CTM-based approaches are computationally expensive, and resource burdens limit their usage and effectiveness in air quality management. Here we proposed a novel method (noted as DeepCTM) that using deep learning to mimic CTM simulations to improve the computational efficiency of photochemical modeling. The well-trained DeepCTM successfully reproduces CTM-simulated O3 concentration using input features of precursor emissions, meteorological factors, and initial conditions. The advantage of the DeepCTM is its high efficiency in identifying the dominant contributors to O3 formation and quantifying the O3 response to variations in emissions and meteorology. The emission-meteorology-concentration linkages implied by the DeepCTM are consistent with known mechanisms of atmospheric chemistry, indicating that the DeepCTM is also scientifically reasonable. The DeepCTM application in China suggests that O3 concentrations are strongly influenced by the initialized O3 concentration, as well as emission and meteorological factors during daytime when O3 is formed photochemically. The variation of meteorological factors such as short-wave radiation can also significantly modulate the O3 chemistry. The DeepCTM developed in this study exhibits great potential for efficiently representing the complex atmospheric system and can provide policymakers with urgently needed information for designing effective control strategies to mitigate O3 pollution.
RESUMEN
Reducing PM2.5 and ozone concentrations is important to protect human health and the environment. Chemical transport models, such as the Community Multiscale Air Quality (CMAQ) model, are valuable tools for exploring policy options for improving air quality but are computationally expensive. Here, we statistically fit an efficient polynomial function in a response surface model (pf-RSM) to CMAQ simulations over the eastern U.S. for January and July 2016. The pf-RSM predictions were evaluated using out-of-sample CMAQ simulations and used to examine the nonlinear response of air quality to emission changes. Predictions of the pf-RSM are in good agreement with the out-of-sample CMAQ simulations, with some exceptions for cases with anthropogenic emission reductions approaching 100%. NOX emission reductions were more effective for reducing PM2.5 and ozone concentrations than SO2, NH3, or traditional VOC emission reductions. NH3 emission reductions effectively reduced nitrate concentrations in January but increased secondary organic aerosol (SOA) concentrations in July. More work is needed on SOA formation under conditions of low NH3 emissions to verify the responses of SOA to NH3 emission changes predicted here. Overall, the pf-RSM performs well in the eastern U.S., but next-generation RSMs based on deep learning may be needed to meet the computational requirements of typical regulatory applications.
RESUMEN
Air quality modeling for research and regulatory applications often involves executing many emissions sensitivity cases to quantify impacts of hypothetical scenarios, estimate source contributions, or quantify uncertainties. Despite the prevalence of this task, conventional approaches for perturbing emissions in chemical transport models like the Community Multiscale Air Quality (CMAQ) model require extensive offline creation and finalization of alternative emissions input files. This workflow is often time-consuming, error-prone, inconsistent among model users, difficult to document, and dependent on increased hard disk resources. The Detailed Emissions Scaling, Isolation, and Diagnostic (DESID) module, a component of CMAQv5.3 and beyond, addresses these limitations by performing these modifications online during the air quality simulation. Further, the model contains an Emission Control Interface which allows users to prescribe both simple and highly complex emissions scaling operations with control over individual or multiple chemical species, emissions sources, and spatial areas of interest. DESID further enhances the transparency of its operations with extensive error-checking and optional gridded output of processed emission fields. These new features are of high value to many air quality applications including routine perturbation studies, atmospheric chemistry research, and coupling with external models (e.g., energy system models, reduced-form models).
RESUMEN
Epidemiologic studies have found associations between fine particulate matter (PM2.5) exposure and adverse health effects using exposure models that incorporate monitoring data and other relevant information. Here, we use nine PM2.5 concentration models (i.e., exposure models) that span a wide range of methods to investigate i) PM2.5 concentrations in 2011, ii) potential changes in PM2.5 concentrations between 2011 and 2028 due to on-the-books regulations, and iii) PM2.5 exposure for the U.S. population and four racial/ethnic groups. The exposure models included two geophysical chemical transport models (CTMs), two interpolation methods, a satellite-derived aerosol optical depth-based method, a Bayesian statistical regression model, and three data-rich machine learning methods. We focused on annual predictions that were regridded to 12-km resolution over the conterminous U.S., but also considered 1-km predictions in sensitivity analyses. The exposure models predicted broadly consistent PM2.5 concentrations, with relatively high concentrations on average over the eastern U.S. and greater variability in the western U.S. However, differences in national concentration distributions (median standard deviation: 1.00 µg m-3) and spatial distributions over urban areas were evident. Further exploration of these differences and their implications for specific applications would be valuable. PM2.5 concentrations were estimated to decrease by about 1 µg m-3 on average due to modeled emission changes between 2011 and 2028, with decreases of more than 3 µg m-3 in areas with relatively high 2011 concentrations that were projected to experience relatively large emission reductions. Agreement among models was closer for population-weighted than uniformly weighted averages across the domain. About 50% of the population was estimated to experience PM2.5 concentrations less than 10 µg m-3 in 2011 and PM2.5 improvements of about 2 µg m-3 due to modeled emission changes between 2011 and 2028. Two inequality metrics were used to characterize differences in exposure among the four racial/ethnic groups. The metrics generally yielded consistent information and suggest that the modeled emission reductions between 2011 and 2028 would reduce absolute exposure inequality on average.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Aerosoles/análisis , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Teorema de Bayes , Monitoreo del Ambiente , Modelos Estadísticos , Material Particulado/análisisRESUMEN
Efficient prediction of the air quality response to emission changes is a prerequisite for an integrated assessment system in developing effective control policies. Yet, representing the nonlinear response of air quality to emission controls with accuracy remains a major barrier in air quality-related decision making. Here, we demonstrate a novel method that combines deep learning approaches with chemical indicators of pollutant formation to quickly estimate the coefficients of air quality response functions using ambient concentrations of 18 chemical indicators simulated with a comprehensive atmospheric chemical transport model (CTM). By requiring only two CTM simulations for model application, the new method significantly enhances the computational efficiency compared to existing methods that achieve lower accuracy despite requiring 20+ CTM simulations (the benchmark statistical model). Our results demonstrate the utility of deep learning approaches for capturing the nonlinearity of atmospheric chemistry and physics and the prospects of the new method to support effective policymaking in other environment systems.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Aprendizaje Profundo , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Monitoreo del Ambiente , Modelos EstadísticosRESUMEN
A scientifically sound integrated assessment modeling (IAM) system capable of providing optimized cost-benefit analysis is essential in effective air quality management and control strategy development. Yet scenario optimization for large-scale applications is limited by the computational expense of optimization over many control factors. In this study, a multi-pollutant cost-benefit optimization system based on a genetic algorithm (GA) in machine learning has been developed to provide cost-effective air quality control strategies for large-scale applications (e.g., solution spaces of ~1035). The method was demonstrated by providing optimal cost-benefit control pathways to attain air quality goals for fine particulate matter (PM2.5) and ozone (O3) over the Pearl River Delta (PRD) region of China. The GA was found to be >99% more efficient than the commonly used grid searching method while providing the same combination of optimized multi-pollutant control strategies. The GA method can therefore address air quality management problems that are intractable using the grid searching method. The annual attainment goals for PM2.5 (< 35 µg m-3) and O3 (< 80 ppb) can be achieved simultaneously over the PRD region and surrounding areas by reducing NOx (22%), volatile organic compounds (VOCs, 12%), and primary PM (30%) emissions. However, to attain stricter PM2.5 goals, SO2 reductions (> 9%) are needed as well. The estimated benefit-to-cost ratio of the optimal control strategy reached 17.7 in our application, demonstrating the value of multi-pollutant control for cost-effective air quality management in the PRD region.
RESUMEN
Understanding the air pollution emission abatement potential and associated control cost is a prerequisite to design cost efficient control policies. In this study, a linear programming algorithm model, International Control Cost Estimate Tool, was updated with cost data for applications of 56 types of end-of-pipe technologies and five types of renewable energy in 10 major sectors namely power generation, industry combustion, cement production, iron and steel production, other industry processes, domestic combustion, transportation, solvent use, livestock rearing, and fertilizer use. The updated model was implemented to estimate the abatement potential and marginal cost of multiple pollutants in China. The total maximum abatement potentials of sulfur dioxide (SO2), nitrogen oxides (NOx), primary particulate matter (PM2.5), non-volatile organic compounds (NMVOCs), and ammonia (NH3) in China were estimated to be 19.2, 20.8, 9.1, 17.2 and 8.6 Mt, respectively, which accounted for 89.7%, 89.9%, 94.6%, 74.0%, and 80.2% of their total emissions in 2014, respectively. The associated control cost of such reductions was estimated as 92.5, 469.7, 75.7, 449.0, and 361.8 billion CNY in SO2, NOx, primary PM2.5, NMVOCs and NH3, respectively. Shandong, Jiangsu, Henan, Zhejiang, and Guangdong provinces exhibited large abatement potentials for all pollutants. Provincial disparity analysis shows that high GDP regions tend to have higher reduction potential and total abatement costs. End-of-pipe technologies tended be a cost-efficient way to control pollution in industries processes (i.e., cement plants, iron and steel plants, lime production, building ceramic production, glass and brick production), whereas such technologies were less cost-effective in fossil fuel-related sectors (i.e., power plants, industry combustion, domestic combustion, and transportation) compared with renewable energy. The abatement potentials and marginal abatement cost curves developed in this study can further be used as a crucial component in an integrated model to design optimized cost-efficient control policies.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , China , Monitoreo del Ambiente , Material Particulado , Dióxido de AzufreRESUMEN
Data assimilation for multiple air pollutant concentrations has become an important need for modeling air quality attainment, human exposure and related health impacts, especially in China that experiences both PM2.5 and O3 pollution. Traditional data assimilation or fusion methods are mainly focused on individual pollutants, and thus cannot support simultaneous assimilation for both PM2.5 and O3. To fill the gap, this study proposed a novel multipollutant assimilation method by using an emission-concentration response model (noted as RSM-assimilation). The new method was successfully applied to assimilate precursors for PM2.5 and O3 in the 28 cities of the North China Plain (NCP). By adjusting emissions of five pollutants (i.e., NOx, SO2, NH3, VOC and primary PM2.5) in the 28 cities through RSM-assimilation, the RMSEs (root mean square errors) of O3 and PM2.5 were reduced by about 35% and 58% from the original simulations. The RSM-assimilation results small sensitivity to the number of observation sites due to the use of prior knowledge of the spatial distribution of emissions; however, the ability to assimilate concentrations at the edge of the control region is limited. The emission ratios of five pollutants were simultaneously adjusted during the RSM-assimilation, indicating that the emission inventory may underestimate NO2 in January, April and October, and SO2 in April, but overestimate NH3 in April and VOC in January and October. Primary PM2.5 emissions are also significantly underestimated, particularly in April (dust season in NCP). Future work should focus on expanding the control area and including NH3 observations to improve the RSM-assimilation performance and emission inventories.
RESUMEN
Previous studies have proposed that model performance statistics from earlier photochemical grid model (PGM) applications can be used to benchmark performance in new PGM applications. A challenge in implementing this approach is that limited information is available on consistently calculated model performance statistics that vary spatially and temporally over the U.S. Here, a consistent set of model performance statistics are calculated by year, season, region, and monitoring network for PM2.5 and its major components using simulations from versions 4.7.1-5.2.1 of the Community Multiscale Air Quality (CMAQ) model for years 2007-2015. The multi-year set of statistics is then used to provide quantitative context for model performance results from the 2015 simulation. Model performance for PM2.5 organic carbon in the 2015 simulation ranked high (i.e., favorable performance) in the multi-year dataset, due to factors including recent improvements in biogenic secondary organic aerosol and atmospheric mixing parameterizations in CMAQ. Model performance statistics for the Northwest region in 2015 ranked low (i.e., unfavorable performance) for many species in comparison to the 2007-2015 dataset. This finding motivated additional investigation that suggests a need for improved speciation of wildfire PM2.5emissions and modeling of boundary layer dynamics near water bodies. Several limitations were identified in the approach of benchmarking new model performance results with previous results. Since performance statistics vary widely by region and season, a simple set of national performance benchmarks (e.g., one or two targets per species and statistic) as proposed previously are inadequate to assess model performance throughout the U.S. Also, trends in model performance statistics for sulfate over the 2007 to 2015 period suggest that model performance for earlier years may not be a useful reference for assessing model performance for recent years in some cases. Comparisons of results from the 2015 base case with results from five sensitivity simulations demonstrated the importance of parameterizations of NH3 surface exchange, organic aerosol volatility and production, and emissions of crustal cations for predicting PM2.5 species concentrations.
RESUMEN
PM2.5 concentration fields that correspond to just meeting national ambient air quality standards (NAAQS) are useful for characterizing exposure in regulatory assessments. Computationally efficient methods that incorporate predictions from photochemical grid models (PGM) are needed to realistically project baseline concentration fields for these assessments. Thorough cross validation (CV) of hybrid spatial prediction models is also needed to better assess their predictive capability in sparsely monitored areas. In this study, a system for generating, evaluating, and projecting PM2.5 spatial fields to correspond with just meeting the PM2.5 NAAQS is developed and demonstrated. Results of ten-fold CV based on standard and spatial cluster withholding approaches indicate that performance of three spatial prediction models improves with decreasing distance to the nearest neighboring monitor, improved PGM performance, and increasing distance from sources of PM2.5 heterogeneity (e.g., complex terrain and fire). An air quality projection tool developed here is demonstrated to be effective for quickly projecting PM2.5 spatial fields to just meet NAAQS using realistic spatial response patterns based on air quality modeling. PM2.5 tends to be most responsive to primary PM2.5 emissions in urban areas, whereas response patterns are relatively smooth for NOx and SO2 emission changes. On average, PM2.5 is more responsive to changes in anthropogenic primary PM2.5 emissions than NOx and SO2 emissions in the contiguous U.S.
RESUMEN
Control strategies can be optimized to attain air quality standards at minimal cost through selecting optimal combinations of controls on various pollutants and regional sources. In this study, we developed a module for least-cost control strategy optimization based on a real-time prediction system of the responses of pollution concentrations to emissions changes and marginal cost curves of pollutant controls. Different from other method, in this study the relationship between pollution concentrations to and precursor emissions was derived from multiple air quality simulations in which the nonlinear interactions among different precursor emissions can be well addressed. Hypothetical control pathways were designed to attain certain air quality goals for particulate matter (PM2.5) and ozone (O3) in the Beijing-Tianjin-Hebei region under the 2014 baseline emission level. Results suggest that reducing local primary PM emissions was the most cost-efficient method to attain the ambient PM2.5 standard, whereas for O3 attainment, reducing regional emission sources of gaseous pollutants (i.e., SO2, NOx, and volatile organic compounds (VOCs)) exhibited greater effectiveness. NH3 controls may be cost-efficient in achieving strengthened PM2.5 targets; however, they might not help in reducing O3. To achieve both PM2.5 (<35⯵gâ¯m-3) and O3 (daily 1-h maxima concentrationâ¯<â¯100â¯ppb) targets in Beijing, the reduced rates in BTH regions of NOx, SO2, NH3, VOCs and primary PM are 75%, 75%, 5%, 55%, and 85%, respectively from the emission levels in the year of 2014. Local reduction is the most effective method of attaining moderate PM2.5 and O3 targets; however, to achieve more aggressive air quality goals, the same level of reductions must be conducted across the whole Beijing-Tianjin-Hebei region.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Beijing , China , Control de Costos , Monitoreo del Ambiente , Material ParticuladoRESUMEN
Atmospheric mercury (Hg) poses human health and ecological risks once deposited and bio-accumulated through food chains. Source contribution analysis of Hg deposition is essential to formulating emission control strategies to alleviate the adverse impact of Hg release from anthropogenic sources. In this study, a Hg version of California Puff Dispersion Modeling (denoted as CALPUFF-Hg) system with added Hg environmental processes was implemented to simulate the Hg concentration and deposition in the central region of the Pearl River Delta (cPRD) at 1â¯kmâ¯×â¯1â¯km resolution. The contributions of eight source sectors to Hg deposition were evaluated. Model results indicated that the emission from cement production was the largest contributor to Hg deposition, accounting for 13.0%, followed by coal-fired power plants (6.5%), non-ferrous metal smelting (5.4%), iron and steel production (3.5%), and municipal solid waste incineration (3.4%). The point sources that released a higher fraction of gaseous oxidized mercury, such as cement production and municipal solid waste incineration, were the most significant contributors to local deposition. In this intensive industrialized region, large point sources contributed 67-94% of total Hg deposition of 6 receptors which were the nearest grid-cells from top five Hg emitters of the domain and the largest municipal solid waste incinerator in Guangzhou. Based on the source apportionment results, cement production and the rapidly growing municipal solid waste incineration are identified as priority sectors for Hg emission control in the cPRD region.
Asunto(s)
Monitoreo del Ambiente/métodos , Mercurio/análisis , Ríos/química , Residuos Sólidos/análisis , Contaminantes Químicos del Agua/análisis , Contaminantes Atmosféricos/análisis , California , China , Materiales de Construcción , Humanos , Incineración , Hierro/análisis , Centrales Eléctricas , Acero/análisis , Emisiones de Vehículos/análisisRESUMEN
The ambient air quality of Guangzhou in 2016 has significantly improved since Guangzhou and its surrounding cities implemented a series of air pollution control measures from 2014 to 2016. This study not only estimated the effects of meteorology and emission control measures on air quality improvement in Guangzhou but also assessed the contributions of emissions reduction from various sources through the combination of observation data and simulation results from Weather Research and Forecasting - Community Multiscale Air Quality (WRF-CMAQ) modeling system. Results showed that the favorable meteorological conditions in 2016 alleviated the air pollution. Compared to change in meteorology, implementing emission control measures in Guangzhou and surrounding cities was more beneficial for air quality improvement, and it could reduce the concentrations of SO2, NO2, PM2.5, PM10, and O3 by 9.7⯵gâ¯m-3 (48.4%), 9.2⯵gâ¯m-3 (17.7%), 7.7⯵gâ¯m-3 (14.6%), 9.7⯵gâ¯m-3 (13.4%), and 12.0⯵gâ¯m-3 (7.7%), respectively. Furthermore, emission control measures that implemented in Guangzhou contributed most to the concentration reduction of SO2, NO2, PM2.5, and PM10 (46.0% for SO2, 15.2% for NO2, 9.4% for PM2.5, and 9.1% for PM10), and it increased O3 concentration by 2.4%. With respect to the individual contributions of source emissions reduction, power sector emissions reduction showed the greatest contribution in reducing the concentrations of SO2, NO2, PM2.5, and PM10 due to the implementation of Ultra-Clean control technology. As for O3 mitigation, VOCs product-related source emissions reduction was most effective, and followed by transportation source emissions reduction, while the reductions of power sector, industrial boiler, and industrial process source might not be as effective. Our findings provide scientific advice for the Guangzhou government to formulate air pollution prevention and control policies in the future.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , China , Ciudades , Monitoreo del Ambiente , Mejoramiento de la CalidadRESUMEN
A direct and quantitative linkage of air pollution-related health effects to emissions from different sources is critically important for decision-making. While a number of studies have attributed the PM2.5-related health impacts to emission sources, they have seldom examined the complicated nonlinear relationships between them. Here we investigate the nonlinear relationships between PM2.5-related premature mortality in the Beijing-Tianjin-Hebei (BTH) region, one of the most polluted regions in the world, and emissions of different pollutants from multiple sectors and regions, through a combination of chemical transport model (CTM), extended response surface model (ERSM), and concentration-response functions (CRFs). The mortalities due to both long-term and short-term exposures to PM2.5 are most sensitive to the emission reductions of primary PM2.5, followed by NH3, nonmethane volatile organic compounds and intermediate volatility organic compounds (NMVOC+IVOC). The sensitivities of long-term mortality to emissions of primary organic aerosol (POA), NMVOC+IVOC and SO2 do not change much with reduction ratio, whereas the sensitivities to primary inorganic PM2.5 (defined as all chemical components of primary PM2.5 other than POA), NH3 and NOx increase significantly with the increase of reduction ratio. The emissions of primary PM2.5, especially those from the residential and commercial sectors, contribute a larger fraction of mortality in winter (57-70%) than in other seasons (28-42%). When emissions of multiple pollutants or those from both local and regional emissions are controlled simultaneously, the overall sensitivity of long-term mortality is much larger than the arithmetic sum of the sensitivities to emissions of individual pollutants or from individual regions. This implies that a multi-pollutant, multi-sector and regional joint control strategy should be implemented to maximize the marginal health benefits. For NOx emissions, we suggest a nationwide control strategy which significantly enhances the effectiveness for reducing mortality by avoiding possible side effects when only the emissions within the BTH region are reduced.
Asunto(s)
Contaminantes Atmosféricos/efectos adversos , Exposición a Riesgos Ambientales/efectos adversos , Mortalidad Prematura , Material Particulado/efectos adversos , China/epidemiología , Humanos , Dinámicas no Lineales , Tamaño de la PartículaRESUMEN
The Pearl River Delta (PRD), one of the most polluted and populous regions of China, experienced a 28% reduction in fine particulate matter (PM2.5) concentration between 2013 (47⯵g/m3) and 2015 (34⯵g/m3) under a stringent national policy known as the Air Pollution Prevention and Control Action Plan (hereafter Action Plan). In this study, the health and economic benefits associated with PM2.5 reductions in PRD during 2013-2015 were estimated using the Environmental Benefits Mapping and Analysis Program-Community Edition (BenMAP-CE) software. To create reliable gridded PM2.5 surfaces for BenMAP-CE calculations, a data fusion tool which incorporates the accuracy of monitoring data and the spatial coverage of predictions from the Community Multiscale Air Quality (CMAQ) model has been developed. The population-weighted average PM2.5 concentration over PRD was predicted to decline by 24%. PM2.5-related mortality was estimated to decrease by more than 3800 due to decreases in stroke (48%), ischemic heart disease (IHD) (35%), chronic obstructive pulmonary disease (COPD) (10%), and lung cancer (LC) (7%). A 13% reduction in PM2.5-related premature deaths from these four causes yielded a large economic benefit of about 1300 million US dollars. Our research suggests that the Action Plan played a major role in reducing emissions and additional measures should be implemented to further reduce PM2.5 pollution and protect public health in the future.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , China , Mortalidad Prematura , Material ParticuladoRESUMEN
Designing effective control policies requires efficient quantification of the nonlinear response of air pollution to emissions. However, neither the current observable indicators nor the current indicators based on response-surface modeling (RSM) can fulfill this requirement. Therefore, this study developed new observable RSM-based indicators and applied them to ambient fine particle (PM2.5) and ozone (O3) pollution control in China. The performance of these observable indicators in predicting O3 and PM2.5 chemistry was compared with that of the current RSM-based indicators. H2O2×HCHO/NO2 and total ammonia ratio, which exhibited the best performance among indicators, were proposed as new observable O3- and PM2.5-chemistry indicators, respectively. Strong correlations between RSM-based and traditional observable indicators suggested that a combination of ambient concentrations of certain chemical species can serve as an indicator to approximately quantify the response of O3 and PM2.5 to changes in precursor emissions. The observable RSM-based indicator for O3 (observable peak ratio) effectively captured the strong NOx-saturated regime in January and the NOx-limited regime in July, as well as the strong NOx-saturated regime in northern and eastern China and their key regions, including the Yangtze River Delta and Pearl River Delta. The observable RSM-based indicator for PM2.5 (observable flex ratio) also captured strong NH3-poor condition in January and NH3-rich condition in April and July, as well as NH3-rich in northern and eastern China and the Sichuan Basin. Moreover, analysis of these newly developed observable response indicators suggested that the simultaneous control of NH3 and NOx emissions produces greater benefits in provinces with higher PM2.5 exposure by up to 1.2 µg m-3 PM2.5 per 10 % NH3 reduction compared with NOx control only. Control of volatile organic compound (VOC) emissions by as much as 40 % of NOx controls is necessary to obtain the cobenefits of reducing both O3 and PM2.5 exposure at the national level when controlling NOx emissions. However, the VOC-to-NOx ratio required to maintain benefits varies significantly from 0 to 1.2 in different provinces, suggesting that a more localized control strategy should be designed for each province.
RESUMEN
A number of software tools exist to estimate the health and economic impacts associated with air quality changes. Over the past 15 years, the U.S. Environmental Protection Agency and its partners invested substantial time and resources in developing the Environmental Benefits Mapping and Analysis Program - Community Edition (BenMAP-CE). BenMAP-CE is a publicly available, PC-based open source software program that can be configured to conduct health impact assessments to inform air quality policies anywhere in the world. The developers coded the platform in C# and made the source code available in GitHub, with the goal of building a collaborative relationship with programmers with expertise in other environmental modeling programs. The team recently improved the BenMAP-CE user experience and incorporated new features, while also building a cadre of analysts and BenMAP-CE training instructors in Latin America and Southeast Asia.
RESUMEN
We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.
RESUMEN
Tropospheric ozone (O3) and fine particles (PM2.5) come from both local and regional emissions sources. Due to the nonlinearity in the response of O3 and PM2.5 to their precursors, contributions from multiregional sources are challenging to quantify. Here we developed an updated extended response surface modeling technique (ERSMv2.0) to address this challenge. Multiregional contributions were estimated as the sum of three components: (1) the impacts of local chemistry on the formation of the pollutant associated with the change in its precursor levels at the receptor region; (2) regional transport of the pollutant from the source region to the receptor region; and (3) interregional effects among multiple regions, representing the impacts on the contribution from one source region by other source regions. Three components were quantified individually in the case study of Beijing-Tianjin-Hebei using the ERSMv2.0 model. For PM2.5 in most cases, the contribution from local chemistry (i.e., component 1) is greater than the contribution from regional transport (i.e., component 2). However, regional transport is more important for O3. For both O3 and PM2.5, the contribution from regional sources increases during high-pollution episodes, suggesting the importance of joint controls on regional sources for reducing the heavy air pollution.