The dispensability of VH-VL pairing and the indispensability of VL domain integrity in the IgG1 secretion process.

Introduction: The CH1 domain of IgG antibodies controls assembly and secretion, mediated by the molecular chaperone BiP via the endoplasmic reticulum protein quality control (ERQC) mechanism. However, it is not clear whether the variable domains are necessary for this process. Methods: Here, we generated IgG1 antibodies in which the V domain (VH and/or VL) was either removed or replaced, and then assessed expression, assembly, and secretion in HEK293 cells. Results: All Ig variants formed a covalent linkage between the Cγ1 and Cκ, were successfully secreted in an assembled form. Replacement of the cognate Vκ with a non-secretory pseudo Vκ (ψVκ) hindered secretion of individual or assembled secretion of neither heavy chains (HCs) nor light chains (LCs). The ψLC (ψVκ-Cκ) exhibited a less folded structure compared to the wild type (wt) LC, as evidenced by enhanced stable binding to the molecular chaperone BiP and susceptibility to proteolytic degradation. Molecular dynamics simulation demonstrated dramatic alterations in overall structure of ψFab (Fd-ψLC) from wt Fab. Discussion: These findings suggest that V domains do not initiate HC:LC assembly and secretion; instead, the critical factor governing IgG assembly and secretion is the CH-CL pairing. Additionally, the structural integrity of the VL domain is crucial for IgG secretion. These data offer valuable insight into the design of bioactive molecules based on an IgG backbone.

Carbon dioxide-assisted thermochemical conversion of magnetically harvested harmful algae into syngas and metal biochar.

With rising of harmful algae blooming and toxin exposure, practical utilization of harmful algae has been developed. This work aimed to magnetically harvest Microcystis aeruginosa (MA) using iron oxides and investigate the feasibility of algae/iron oxides mixture as feedstock in pyrolytic platform to produce syngas and metal biochar. Carbon dioxide (CO2) was used as a feeding gas to enhance the production efficiency of syngas and also functioned pH controller for better MA harvesting and toxin removal. CO2 support brought multiple benefits: magnetite (Fe3O4) and maghemite (γ-Fe2O3) recovered MA in a relatively short period of time (∼1 min), the recovered biomass generated 34-fold increased carbon monoxide, and metal biochar adsorbed higher amount of toxin from MA (2.8-fold). Pyrolytic utilization of harmful algae supported by CO2 and iron oxides could be one of promising techniques for evolution of metal biochar to remove toxin, while efficiently recover biomass and enhance syngas production.

Surface decontamination of radioactive cesium by a reversibly cross-linkable hydrogel using poly(vinyl alcohol) and phenylboronic acid-grafted poly(methyl vinyl ether-alt-mono-sodium maleate).

Wide-area surface decontamination is essential during the sudden release of radioisotopes to the public, such as nuclear accidents or terrorist attacks. A self-generated hydrogel comprising a reversible complex between poly(vinyl alcohol) (PVA) and phenylboronic acid-grafted poly(methyl vinyl ether-alt-mono-sodium maleate) (PBA-g-PMVE-SM) was developed as a new surface decontamination coating agent to remove radioactive cesium from surfaces. The simultaneous application of PVA and PBA-g-PMVE-SM aqueous polymer solutions containing sulfur-zeolite to contaminated surfaces resulted in the spontaneous formation of a PBA-diol ester bond-based hydrogel. The sulfur-zeolite suspended in the hydrogel selectively removed 137Cs from the contaminated surface and was easily separated from the dissociable used hydrogel. This removal was performed by simple water rinsing without costly incineration to remove the organic materials for final disposal/storage of the radioactive waste, making it suitable for practical wide-area surface decontamination. In radioactive tests, the hydrogel containing sulfur-chabazite (S-CHA) showed substantial 137Cs removal efficiencies of 96.996% for painted cement and 63.404% for cement, which are 2.33 times better than the values for the commercial surface decontamination coating agent DeconGel. Due to its excellent zeolite ion-exchange ability, our hydrogel system has great potential for removing various hazardous contaminants, including radionuclides, from the surface.

Adsorption of potentially harmful elements by metal-biochar prepared via Co-pyrolysis of coffee grounds and Nano Fe(III) oxides.

Nano Fe(III) oxide (FO) was used as an amendment material in CO2-assisted pyrolysis of spent coffee grounds (SCG) and its impacts on the syngas (H2 & CO) generation and biochar adsorptive properties were investigated. Amendment of FO led to 153 and 682% increase of H2 and CO in pyrolytic process of SCG, respectively, which is deemed to arise from enhanced thermal cracking of hydrocarbons and oxygen transfer reaction mediated by FO. Incorporation of FO successfully created porous structure in the produced biochar. The adsorption tests revealed that the biochar exhibited bi-functional capability to remove both positively charged Cd(II) and Ni(II), and negatively charged Sb(V). The adsorption of Cd(II) and Ni(II) was hardly deteriorated in the multiple adsorption cycles, and the adsorption of Sb(V) was further enhanced through formation of surface ternary complexes. The overall results demonstrated nano Fe(III) oxide is a promising amendment material in CO2-assisted pyrolysis of lignocellulosic biomass for enhancing syngas generation and producing functional biochar.

Fabrication of aluminum beads derived from selectively recovered Al-rich precipitates and their application into defluoridation.

This work introduced a new way of fabricating a granular material with the supply of Al-rich precipitates selectively obtained from acid mine drainage (AMD), and its potential as a promising adsorbent for fluoride (F) was evaluated. Through the selective sequential precipitation (SP) process in the field, Al-rich precipitates with high purity (>81%) were collected at the high recovery rate (>99.8%) as a raw material for adsorbent fabrication. The granular adsorbent (ALB) was synthesized through encapsulation of precipitate powders by chemically inducing polymeric bead formation. The characterization results revealed that ALB possessed a highly porous structure and embedded a large number of nanoparticles of amorphous Al hydroxides inside its framework. Less adsorption of F occurred at an alkaline pH condition due to the competitive effect of hydroxyl ions. The adsorption process can be divided into fast adsorption by the outer surface and slow diffusion in the inner phase. The maximum adsorption capacity of ALB for F was calculated to be 17.7 mg g-1 in the Langmuir isotherm model fitting results. By the repetitive adsorption/desorption and XPS results, it turned out that both chemisorption and physisorption gave a contribution in the removal of F, and the regeneration of adsorbent using NaOH was effective to restore the adsorption capability but accompanied the loss of adsorption sites. As a result, it can be concluded that a granule-type material fabricated using Al-rich precipitates selectively recovered from AMD neutralization can be considered as a promising adsorbent for F removal in aqueous solution.

Arsenic removal characteristics of natural Mn-Fe binary coating on waste filter sand from a water treatment facility.

In this study, the arsenic (As) removal characteristics of a Mn-Fe binary coating formed on waste sand filter of an acid mine drainage treatment facility are investigated. Owing to the Mn-Fe binary coating forming on the surfaces of the sand grains, its potential for arsenic removal, particularly As(III), was evaluated and characterized through batch experiments and x-ray absorption spectroscopy. Sorption isotherms reveal that the Mn-Fe binary coating exhibits comparable removal efficiencies for As(III) and As(V) under low initial As concentrations. However, at higher initial As(III) and As(V) concentrations, the As(III) removal efficiency increases because of newly formed active adsorption sites from reductive dissolution of Mn. The oxidation of the As(III) and reduction of the Mn oxide phases are verified through As K-edge and Mn K-edge X-ray absorption near edge fine structure analysis. The outstanding As(III) removal efficiency of the Mn-Fe binary coating suggests synergy of Fe- and Mn-oxides, highlighting a potential application for this coating system. The natural formation of binary coating through acid mine drainage treatment reported in this study indicates that similar coating can form naturally in other environments, thus, providing plausible natural attenuation processes for arsenic immobilization.

Water defluorination using granular composite synthesized via hydrothermal treatment of polyaluminum chloride (PAC) sludge.

In this work, we newly synthesized granular composite (GASA) via hydrothermal treatment of polyaluminum chloride (PAC) and subsequently granulation pelleting with starch gel as an organic binder. The resulting composite was characterized with analytic instruments, and the feasibility of utilizing GASA as adsorbent for the removal of fluoride (F-) was tested in the batch and column experiments. The characterization results revealed that GASA possessed a spherical/porous framework consisting of aluminosilicate (i.e., ordered albite, NaAlSiO3O8). The results of final pH effect experiments and XRD/XPS analyses showed the dominant adsorption mechanisms of F- on GASA were electrostatic attraction by protonated surface Al-OH, ligand exchange between surface hydroxyl groups and F ions, and surface precipitation (i.e., cryolite formation). Based on the results of adsorption kinetics and adsorption isotherm, granulation resulted in the relatively slow kinetics of F adsorption compared to the powder type, but was preferred to retain good adsorption capacity. The regeneration possibility of GASA was also proven with the adsorption/desorption cyclic test. In the column study, 15-cm length of the GASA layer and the flow rate less than 0.85 mL min-1 were proposed to keep the satisfactory level of F in water. The experimental results offer a potential of PAC sludge-derived composite as adsorbent for the removal of F from water.

Esculetin exerts anti-proliferative effects against non-small-cell lung carcinoma by suppressing specificity protein 1 in vitro.

Esculetin, a coumarin derivative, is a phenolic compound isolated from Artemisia capillaris, Citrus limonia, and Euphorbia lathyris. Although it has been reported to have anti-inflammatory, anti-oxidant, and anti-proliferative activities in several human cancers, its anti-proliferative activity against non-small-cell lung carcinoma (NSCLC) and the molecular mechanisms involved have not been adequately elucidated. In this study, we used two NSCLC cell lines (NCI-H358 and NCI-H1299) to investigate the anti-proliferative activity and apoptotic effect of esculetin. Our data showed that esculetin-treated cells exhibited reduced proliferation and apoptotic cell morphologies. Intriguingly, the transcription factor specificity protein 1 (Sp1) was significantly suppressed by esculetin in a dose- and time-dependent manner. Furthermore, the levels of p27 and p21, two key regulators of the cell cycle, were up-regulated by the esculetin-mediated down-regulation of Sp1; the level of a third cell-cycle regulator, survivin, was decreased, resulting in caspase-dependent apoptosis. Therefore, we conclude that esculetin could be a potent anti-proliferative agent in patients with NSCLC.

Esculetin, a Coumarin Derivative, Exhibits Anti-proliferative and Pro-apoptotic Activity in G361 Human Malignant Melanoma.

BACKGROUND: Although esculetin, a coumarin compound, is known to induce apoptosis in human cancer cells, the effects and molecular mechanisms on the apoptosis in human malignant melanoma (HMM) cells are not well understood yet. In this study, we investigated the anti-proliferative effects of esculetin on the G361 HMM cells. METHODS: We analyzed the anti-proliferative effects and molecular mechanisms of esculetin on G361 cells by a 3-(4,5-dimethylthiazol- 2-yl)-5-(3-carboxymethoxy phenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, 4',6-diamidino-2-phenylindole staining and Western blotting. RESULTS: Esculetin exhibited significant anti-proliferative effects on the HMM cells in a dose-dependent manner. Interestingly, we found that esculetin induced nuclear shrinkage and fragmentation, typical apoptosis markers, by suppression of Sp1 transcription factor (Sp1). Notably, esculetin modulated Sp1 downstream target genes including p27, p21 and cyclin D1, resulted in activation of apoptosis signaling molecules such as caspase-3 and PARP in G361 HMM cells. CONCLUSIONS: Our results clearly demonstrated that esculetin induced apoptosis in the HMM cells by downregulating Sp1 protein levels. Thus, we suggest that esculetin may be a potential anti-proliferative agent that induces apoptotic cell death in G361 HMM cells.