Systemic Lupus Erythematosus and Lung Involvement: A Comprehensive Review.

Systemic lupus erythematosus (SLE) is a complex autoimmune disease with multiorgan manifestations, including pleuropulmonary involvement (20-90%). The precise mechanism of pleuropulmonary involvement in SLE is not well-understood; however, systemic type 1 interferons, circulating immune complexes, and neutrophils seem to play essential roles. There are eight types of pleuropulmonary involvement: lupus pleuritis, pleural effusion, acute lupus pneumonitis, shrinking lung syndrome, interstitial lung disease, diffuse alveolar hemorrhage (DAH), pulmonary arterial hypertension, and pulmonary embolism. DAH has a high mortality rate (68-75%). The diagnostic tools for pleuropulmonary involvement in SLE include chest X-ray (CXR), computed tomography (CT), pulmonary function tests (PFT), bronchoalveolar lavage, biopsy, technetium-99m hexamethylprophylene amine oxime perfusion scan, and (18)F-fluorodeoxyglucose positron emission tomography. An approach for detecting pleuropulmonary involvement in SLE includes high-resolution CT, CXR, and PFT. Little is known about specific therapies for pleuropulmonary involvement in SLE. However, immunosuppressive therapies such as corticosteroids and cyclophosphamide are generally used. Rituximab has also been successfully used in three of the eight pleuropulmonary involvement forms: lupus pleuritis, acute lupus pneumonitis, and shrinking lung syndrome. Pleuropulmonary manifestations are part of the clinical criteria for SLE diagnosis. However, no review article has focused on the involvement of pleuropulmonary disease in SLE. Therefore, this article summarizes the literature on the epidemiology, pathogenesis, diagnosis, and management of pleuropulmonary involvement in SLE.

Role of injection laryngoplasty in preventing post-stroke aspiration pneumonia, case series report.

INTRODUCTION: Injection laryngoplasty is a common procedure for patients with vocal fold dysfunction, but the literature on its benefits has been mainly focused on those related to structural lesions or laryngeal nerve involvement. Stroke patients may be at increased risk of aspiration due to insufficient vocal fold motion. However, how injection laryngoplasty can be of benefit in stroke patients has not been reported yet. PATIENT CONCERNS: Six chronic stroke patients with long-standing swallowing difficulties and who showed severe aspiration despite long-term swallowing rehabilitation. DIAGNOSIS: Laryngoscope evaluation revealed insufficient glottic closure as the cause of aspiration. INTERVENTIONS: Injection laryngoplasty was done per-orally under local anaesthesia with calcium hydroxylapatite (Radiesse Voice, 1-1.5 mL) in an office setting. Respiratory pressures and peak cough flows were assessed at baseline and at 2 weeks follow-up. OUTCOMES: At 2 weeks, the mean peak cough flow (Δ = +95.09 L/min) increased significantly after the procedure. The maximal expiratory (Δ = +18.40 cm H2O) and inspiratory (Δ = +20.20 cm H2O) pressures also improved, indicating that injection laryngoplasty was effective in augmenting respiratory and cough parameters. All cases showed improvement in the Functional Oral Intake Scale (Δ = +4). Feeding tubes were successfully removed. CONCLUSION: Injection laryngoplasty proved to be both successful and safe in improving glottic closure with immediate results in those who had failed to show a positive response after long-term swallowing rehabilitation. The positive and dramatic clinical outcomes were observed through changes in the coughing force. Our case series support the use of injection larygnoplasty as a powerful adjunctive treatment method to prevent aspiration pneumonia in post-stroke patients with vocal fold insufficiency. Pre- and post-injection peak cough flow changes may reflect improvement in glottic closure and indicate the safety of swallowing with reduced risk of aspiration.

Quantitative Analysis of Microstructures and Reaction Interfaces on Composite Cathodes in All-Solid-State Batteries Using a Three-Dimensional Reconstruction Technique.

The composite cathode of an all-solid-state battery composed of various solid-state components requires a dense microstructure and a highly percolated solid-state interface different from that of a conventional liquid-electrolyte-based Li-ion battery. Indeed, the preparation of such a system is particularly challenging. In this study, quantitative analyses of composite cathodes by three-dimensional reconstruction analysis were performed beyond the existing qualitative analysis, and their microstructures and reaction interfaces were successfully analyzed. Interestingly, various quantitative values of structure properties (such as the volume ratio, connectivity, tortuosity, and pore formation) associated with material optimization and process development were predicted, and they were found to result in limited electrochemical charge/discharge performances. We also verified that the effective two-phase boundaries were significantly suppressed to ∼23% of the total volume because of component dispersion and packing issues.

Comparative Skin Evaluation After Split-Thickness Skin Grafts Using 2 Different Acellular Dermal Matrices to Cover Composite Forearm Defects.

PURPOSE: The combination of acellular dermal matrix (ADM) and split-thickness skin graft (STSG) has been widely adopted to overcome functional and cosmetic limitations of conventional STSG. In this study, we evaluated the efficacy of this combination using 2 types of ADM: cadaveric acellular dermal matrix (CDM) and bovine acellular dermal matrix (BDM). METHODS: We recruited 72 patients undergoing autologous STSG to cover radial forearm free flap donor sites. They were included in 1 of 3 therapeutic groups: group 1, STSG using CDM (n = 29); group 2, STSG using BDM (n = 20); and group 3, STSG only (n = 23). Functional skin values for skin elasticity, humidification, transepidermal water loss, and color were determined. Values were compared between graft sites and adjacent normal (control) skin, and between grafted areas of each group. RESULTS: All skin defects were successfully reconstructed without graft loss. Groups 1 and 2 demonstrated better elasticity than did group 3, based on the analysis using the ratio of grafted area to control. Grafted areas in all 3 groups exhibited less moisture than did control normal skin. There was less transepidermal water loss in group 1 than in group 3, which implied that CDM application had better barrier capacity against water evaporation. Graft sites of groups 1 and 3 exhibited darker and redder color compared with control areas. CONCLUSIONS: Composite forearm defects were successfully restored and exhibited acceptable quality after treatment with an ADM plus STSG. Applying either CDM or BDM under a STSG was a suitable procedure, as verified by objective measurements. Elasticity was well preserved in CDM and BDM groups. However, both ADMs revealed functional impairment of humidification. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Simple Correction of Alar Retraction by Conchal Cartilage Extension Grafts.

BACKGROUND: Alar retraction is a challenging condition in rhinoplasty marked by exaggerated nostril exposure and awkwardness. Although various methods for correcting alar retraction have been introduced, none is without drawbacks. Herein, we report a simple procedure that is both effective and safe for correcting alar retraction using only conchal cartilage grafting. METHODS: Between August 2007 and August 2009, 18 patients underwent conchal cartilage extension grafting to correct alar retraction. Conchal cartilage extension grafts were fixed to the caudal margins of the lateral crura and covered with vestibular skin advancement flaps. Preoperative and postoperative photographs were reviewed and analyzed. Patient satisfaction was surveyed and categorized into 4 groups (very satisfied, satisfied, moderate, or unsatisfied). RESULTS: According to the survey, 8 patients were very satisfied, 9 were satisfied, and 1 considered the outcome moderate, resulting in satisfaction for most patients. The average distance from the alar rim to the long axis of the nostril was reduced by 1.4 mm (3.6 to 2.2 mm). There were no complications, except in 2 cases with palpable cartilage step-off that resolved without any aesthetic problems. CONCLUSIONS: Conchal cartilage alar extension graft is a simple, effective method of correcting alar retraction that can be combined with aesthetic rhinoplasty conveniently, utilizing conchal cartilage, which is the most similar cartilage to alar cartilage, and requiring a lesser volume of cartilage harvest compared to previously devised methods. However, the current procedure lacks efficacy for severe alar retraction and a longer follow-up period may be required to substantiate the enduring efficacy of the current procedure.

Optimization of CdS Buffer Layer for High Efficiency CIGS Solar Cells.

In present work, effects of the thickness on the structural and optical properties of chemically deposited CdS thin films were investigated. In addition, we fabricated Cu(In, Ga)Se2 solar cells with various thicknesses of CdS buffer layer and optimized the thickness for a high efficiency. When the CdS thin films were thicker, the crystallinity improved but the transmittance decreased. The short-circuit current density (J(sc)) and the fill factor are the major efficiency limiting factors for the CIGS solar cells. As the thickness of the CdS buffer layer, the open-circuit voltage (V(oc)) and the fill factor increased, whereas the J(sc) slightly decreased. The improvement of the fill factor and thus efficiency resulted from larger shunt resistance. For the solar cells without a high resistive intrinsic ZnO layer, the highest efficiency was acquired at the thickness of 89 nm. With further increasing the thickness, the J(sc) decreased significantly, resulting in poor efficiency.

Influence of Oxygen Gas Ratio on the Properties of Aluminum-Doped Zinc Oxide Films Prepared by Radio Frequency Magnetron Sputtering.

Aluminum-doped zinc oxide (AZO) thin films were deposited on glass and polyimide substrates using radio frequency magnetron sputtering. We investigated the effects of the oxygen gas ratio on the properties of the AZO films for Cu(In,Ga)Se2 thin-film solar cell applications. The structural and optical properties of the AZO thin films were measured using X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and UV-Visible-NIR spectrophotometry. The oxygen gas ratio played a crucial role in controlling the optical as well as electrical properties of the films. When oxygen gas was added into the film, the surface AZO thin films became smoother and the grains were enlarged while the preferred orientation changed from (0 0 2) to (1 0 0) plane direction of the hexagonal phase. An improvement in the transmittance of the AZO thin films was achieved with the addition of 2.5-% oxygen gas. The electrical resistivity was highly increased even for a small amount of the oxygen gas addition.

Diagnostic Value of Elevated D-Dimer Level in Venous Thromboembolism in Patients With Acute or Subacute Brain Lesions.

OBJECTIVE: To define the risk factors that influence the occurrence of venous thromboembolism (VTE) in patients with acute or subacute brain lesions and to determine the usefulness of D-dimer levels for VTE screening of these patients. METHODS: Medical data from January 2012 to December 2013 were retrospectively reviewed. Mean D-dimer levels in those with VTE versus those without VTE were compared. Factors associated with VTE were analyzed and the odds ratios (ORs) were calculated. The D-dimer cutoff value for patients with hemiplegia was defined using a receiver operating characteristic (ROC) curve. RESULTS: Of 117 patients with acute or subacute brain lesions, 65 patients with elevated D-dimer levels (mean, 5.1±5.8 mg/L; positive result >0.55 mg/L) were identified. Logistic regression analysis showed that the risk of VTE was 3.9 times higher in those with urinary tract infections (UTIs) (p=0.0255). The risk of VTE was 4.5 times higher in those who had recently undergone surgery (p=0.0151). Analysis of the ROC showed 3.95 mg/L to be the appropriate D-dimer cutoff value for screening for VTE (area under the curve [AUC], 0.63; 95% confidence interval [CI], 0.5-0.8) in patients with acute or subacute brain lesions. This differs greatly from the conventional D-dimer cutoff value of 0.55 mg/L. D-dimer levels less than 3.95 mg/L in the absence of surgery showed a negative predictive value of 95.8% (95% CI, 78.8-99.8). CONCLUSION: Elevated D-dimer levels alone have some value in VTE diagnosis. However, the concomitant presence of UTI or a history of recent surgery significantly increased the risk of VTE in patients with acute or subacute brain lesions. Therefore, a different D-dimer cutoff value should be applied in these cases.

Safety of Donor in Adult-to-Adult Living Donor Liver Transplantation

PURPOSE: Right lobe donation was advocated to overcome size-mismatch between left lobe and larger-size recipient in living donor liver transplantation (LDLT), however, safety of donor is a major concern. The purpose of this study is to evaluate the safety of donor in adult-to-adult LDLT. METHODS: Retrospective analysis of 104 adult-to-adult LDLT was performed by comparison of left lobectomy (n=50) and right lobectomy (n=54) groups. RESULTS: The median age of donors was 28 years and offsprings were most common donors (33.7%). The right lobe graft provided larger mass by 60% than left lobe. The ratio of residual liver volume to total liver volume, operation time, intraoperative blood loss, and postoperative ICU stay showed significant differences in both groups. Recovery of liver profiles was delayed by several days in right lobectomy group, but all donors recovered uneventfully. There was no mortality nor sequela in both groups. Severe postoperative complications occured more frequently in right lobectomy group, and they were bile leakage (n=3), postoperative bleeding (n=5), and portal vein thrombosis (n=1). All complications were controlled with safety. CONCLUSION: Right lobe harvesting can be safe but should be performed only by expert operators because there is potential operative risk. To minimize operative complications, attention should be paid to every step of procedures and to postoperative surveillance.