RESUMEN
This work aims at studying the techno-economic feasibility to produce an extract, at a small industrial-production scale, from a Tisochrysis lutea's paste, in view of cosmetic applications. The paste was first thawed, diluted and centrifuged to get a crude water extract. Then, two successive stages of membrane filtration were carried out: the first one to essentially remove/retain the particles (cellular debris) by microfiltration and the second one to concentrate (ultrafiltration) the soluble compounds of the permeate from the previous step. The robustness of the processing chain has been demonstrated following the production of three similar extracts with more than 30 L input material each. Around 54% of the final extract was composed of proteins and carbohydrates. The final ingredient was assessed for genomic activity and showed multiple positive responses. Finally, an economic analysis was performed, which demonstrated that the major cost is linked to centrifugation step. The total manpower represents the highest cost of the OPEX categories.
RESUMEN
The red microalga Porphyridium cruentum is exploited industrially for its exopolysaccharides (EPS) and pigments production. EPS produced by P. cruentum are partially released and dissolved into the surrounding environment, they can be recovered from the culture medium after removing the cells. This paper presents a parametric study of the ultrafiltration of EPS solutions on organic membrane. The EPS solutions were produced in conditions representative of an industrial production. They were filtered at lab-scale on a flat, PES 50â kDa MWCO membrane in a complete recirculation mode of permeate and retentate. Permeate flux-transmembrane pressure (TMP) curves were established up to the limiting flux for the filtration of solutions with various values of concentration in EPS (0.10-1.06â kg GlcEqâ m-3), fluid tangential velocity (0.3-1.2 mâ s-1) and temperature (20°C and 40°C). The reversible and irreversible parts of fouling were evaluated for each experiment and the critical flux was determined for an intermediate EPS concentration (0.16â kg GlcEqâ m-3). The results showed that EPS solutions had a strong fouling capacity. When filtering the lowest concentrated solution (0.10â kg GlcEqâ m-3) with moderate fouling conditions, the overall fouling resistance was approximately half of the membrane and the share of irreversible/reversible fouling was 88% and 12%. However, the part of reversible fouling becomes predominant when approaching the limiting flux. Permeate fluxes which were obtained allow to estimate that a VRR of approximately 10 could be obtained when concentrating EPS solutions using PES membranes in flat or tubular modules but not in spiral-wound.
Asunto(s)
Microalgas , Porphyridium , Filtración , Membranas Artificiales , Polímeros , UltrafiltraciónRESUMEN
This study tested the efficiency of granular filtration using a bilayer sand filter for microalgae removal from culture dilutions ranging from 10,000 to 17,000â cells/mL. The objective is to evaluate the removal capacity of the filter without chemical coagulation. Two filter media, sand and anthracite, with mean grain sizes of 0.395 and 1.2â mm, respectively, were used in constant-flow-rate experiments (down-flow mode) with suspensions containing Heterocapsa triquetra microalga. The conventional rapid filtration which usually operates at a constant rate of approximately 5â m3/m2â h is compared to high-rate filtration. Two filtration velocities (5 and 10â m/h) were investigated with bed depth of 1100â mm. Average microalgal cell removal rates were 90% at 5â m/h and 68% at 10â m/h. Turbidity removal was more than 71% at 5â m/h but just 57% at 10â m/h. Head losses did not increase significantly, and values measured at process end were 32â mbar at 5â m/h and 78â mbar at 10â m/h. Retention probabilities were calculated from experimental data. A theoretical model was used to evaluate the contributions of the different drivers of microalgae removal. Hypotheses are developed on the understanding of change in the mechanisms of retention as a function of filtration velocity.
Asunto(s)
Alveolados , Carbón Mineral , Microalgas , Modelos Teóricos , Dióxido de Silicio , Filtración , Agua de Mar , Contaminantes del Agua , Purificación del Agua/métodosRESUMEN
The ballast waters from ships pose a major threat to oceans, notably because of the spread of microorganisms. The present study evaluates the techno-economic feasibility of implementing the membrane process to remove microalgae from seawater to be ballasted in a single step during planktonic bloom. The optimal conditions for the microfiltration of complex and reproducible synthetic seawater are a permeate flux and specific filtered volume of 100 L.h(-1).m(-2) and 75 L.m(-2).cycle(-1), respectively. Recovery of the membrane process represents about 76.6% and 62.7% of the annual cost for a cruise ship (5400 passengers) and liquefied natural gas (LNG) carrier (75,000 m3 of liquid natural gas), followed by the membrane replacement cost (13.4% and 21.9%, respectively). The treatment costs are competitive with conventional treatments, even when the membrane process is more feasible for cruise ships due to its smaller capital cost and footprint.
Asunto(s)
Microalgas , Agua de Mar , Purificación del Agua/instrumentación , Purificación del Agua/métodos , Membranas Artificiales , Porosidad , Navíos/economía , Purificación del Agua/economíaRESUMEN
A one-step chromatographic method for the purification of R-phycoerythrin (R-PE) of Grateloupia turuturu Yamada is described. Native R-PE was obtained with a purity index of 2.89 and a recovery yield of 27% using DEAE-Sepharose Fast Flow chromatography with a three-step increase in ionic strength. The analysis by SDS electrophoresis showed a broad band between 18 and 21kDa in size corresponding to subunits α and ß and a low intensity band of 29kDa corresponding to the γ subunit. Two forms of R-PE were identified by gel filtration chromatography: a native form with a molecular weight of 260±5kDa and a dissociated form with a molecular weight of 60±2kDa. The native form presented the characteristic absorption spectrum of R-PE with three absorbance maxima at 498, 540 and 565nm, whereas the dissociated form presented only the 498 and 540nm peaks. Moreover, the two forms displayed two different fluorescence maxima.
Asunto(s)
Ficoeritrina/química , Ficoeritrina/aislamiento & purificación , Extractos Vegetales/química , Rhodophyta/química , Cromatografía por Intercambio Iónico/métodos , Ficoeritrina/análisisRESUMEN
In diatoms, the main photosynthetic pigments are chlorophylls a and c, fucoxanthin, diadinoxanthin and diatoxanthin. The marine pennate diatom Haslea ostrearia has long been known for producing, in addition to these generic pigments, a water-soluble blue pigment, marennine. This pigment, responsible for the greening of oysters in western France, presents different biological activities: allelopathic, antioxidant, antibacterial, antiviral, and growth-inhibiting. A method to extract and purify marennine has been developed, but its chemical structure could hitherto not be resolved. For decades, H. ostrearia was the only organism known to produce marennine, and can be found worldwide. Our knowledge about H. ostrearia-like diatom biodiversity has recently been extended with the discovery of several new species of blue diatoms, the recently described H. karadagensis, H. silbo sp. inedit. and H. provincialis sp. inedit. These blue diatoms produce different marennine-like pigments, which belong to the same chemical family and present similar biological activities. Aside from being a potential source of natural blue pigments, H. ostrearia-like diatoms thus present a commercial potential for aquaculture, cosmetics, food and health industries.
Asunto(s)
Diatomeas/metabolismo , Fenoles/farmacología , Pigmentos Biológicos/farmacología , Animales , Acuicultura/métodos , Cosméticos/química , HumanosRESUMEN
The freshwater microalga Chlorella vulgaris was harvested by autoflocculation resulting from the precipitation of magnesium or calcium compounds induced by a slow increase in pH in the absence of CO2 input. Autoflocculation was tested in two culture media with, respectively, ammonium (NH4+) and nitrate (NO3-) ions as nitrogen source. The culture pH increased because of photosynthesis and CO2 stripping. pH rose to 11 after 8 h in the NO3- medium, but did not exceed 9 in the NH4+ medium. No flocculation took place in any of the media. Autoflocculation tests were repeated in the NO(3-)-based culture medium by progressively increasing the concentrations of Ca2+ and Mg2+ until inorganic compounds precipitated and flocculated microalgae. The minimal concentrations for flocculation were found to be 120 mg Ca2 L(-1) and 1000 mg Mg2+ L(-1). These values were, respectively, 3.5 times and 20 times higher than those allowing flocculation by NaOH addition. Energy-dispersive X-ray spectroscopy, zeta potential measurement, and ionic chromatography suggest that the mechanisms involved are different. The rate of cell removal was close to 90% in both cases, but cells were more concentrated in the aggregates obtained by magnesium compound precipitation, with an estimated concentration close to 33 g (dry matter) L(-1), against 19 g L(-1) for calcium phosphates.
Asunto(s)
Acuicultura , Chlorella vulgaris , Medios de Cultivo/química , Compuestos de Amonio , Calcio , Floculación , Concentración de Iones de Hidrógeno , Magnesio , NitratosRESUMEN
Phycoerythrin is a major light-harvesting pigment of red algae, which could be used as a natural dye in foods. The stability of R-phycoerythrin of Grateloupia turuturu and B-phycoerythrin of Porphyridium cruentum in relation to different light exposure times, pHs, and temperatures was studied. Regarding the light exposure time, after 48h, the reduction in concentrations of B-phycoerythrin and R-phycoerythrin were 30±2.4% and 70±1%, respectively. Phycoerythrins presented good stability from pH 4 to 10. At pH 2, the reduction in concentration was 90±4% for B-phycoerythrin and 40±2.5% for R-phycoerythrin while, at pH 12, the phycoerythrins were degraded. Phycoerythrins showed good stability toward temperature, up to 40°C. At 60°C, the reduction in concentrations of B-phycoerythrin and R-phycoerythrin were 50±3.4% and 70±0.18%, respectively. Moreover, the best conditions of storage (-20°C) were determined.
Asunto(s)
Ficoeritrina/química , Pigmentos Biológicos/química , Porphyridium/química , Rhodophyta/química , Concentración de Iones de Hidrógeno , Luz , TemperaturaRESUMEN
The role of natural compounds of seawater and added particles on mechanisms of membrane fouling and organic matter rejection has been investigated. Ultrafiltration (100 kDa) has been conducted in both dead-end (out/in) and tangential (in/out) modes on polysulfone hollow fibre membranes. The permeate fluxes are approximately three times higher for tangential ultrafiltration than for dead-end ultrafiltration without differences between settled and non-settled seawaters (NS-SWs) (51-55 L h(-1) m(-2) for tangential and 17-22 L h(-1) m(-2) for dead-end ultrafiltration). Adding bentonite or kieselguhr from 0.13 to 1.13 g L(-1) of suspended solids to NS-SW does not act significantly on permeate fluxes of dead-end contrary to tangential ultrafiltration. For the latter, an addition of particles induces a slight drop of permeate fluxes. Original particles of reconstituted seawater could increase the cake porosity, whereas bentonite and kieselguhr, compounds smaller than original particles, could participate in the formation of a compact cake. The total organic carbon removal was equal to approximately 80% whatever the mode of ultrafiltration may be and the suspended solid concentration ranged from 0.13 to 1.13 g L(-1). Dissolved organic carbon (DOC) and colloidal organic carbon rejection rates were greater for tangential ultrafiltration (37-49%) compared with dead-end ultrafiltration (30-44%) at different concentrations of added particles. Bentonite or kieselguhr addition induced a slight decrease of DOC removal. In the case of particles addition, the worst DOC rejection is found for bentonite.
Asunto(s)
Carbono/aislamiento & purificación , Compuestos Orgánicos/aislamiento & purificación , Agua de Mar/análisis , Ultrafiltración/instrumentación , Purificación del Agua/instrumentación , Adsorción , Bentonita/química , Tierra de Diatomeas/química , Membranas Artificiales , Tamaño de la Partícula , Permeabilidad , Polímeros/química , Porosidad , Sulfonas/químicaRESUMEN
BACKGROUND: Numerous studies have demonstrated that in vitro controlled enzymatic hydrolysis of fish and shellfish proteins leads to bioactive peptides. Ultrafiltration (UF) and/or nanofiltration (NF) can be used to refine hydrolysates and also to fractionate them in order to obtain a peptide population enriched in selected sizes. This study was designed to highlight the impact of controlled UF and NF on the stability of biological activities of an industrial fish protein hydrolysate (FPH) and to understand whether fractionation could improve its content in bioactive peptides. RESULTS: The starting fish protein hydrolysate exhibited a balanced amino acid composition, a reproducible molecular weight (MW) profile, and a low sodium chloride content, allowing the study of its biological activity. Successive fractionation on UF and NF membranes allowed concentration of peptides of selected sizes, without, however, carrying out sharp separations, some MW classes being found in several fractions. Peptides containing Pro, Hyp, Asp and Glu were concentrated in the UF and NF retentates compared to the unfractionated hydrolysate and UF permeate, respectively. Gastrin/cholecystokinin-like peptides were present in the starting FPH, UF and NF fractions, but fractionation did not increase their concentration. In contrast, quantification of calcitonin gene-related peptide (CGRP)-like peptides demonstrated an increase in CGRP-like activities in the UF permeate, relative to the starting FPH. The starting hydrolysate also showed a potent antioxidant and radical scavenging activity, and a moderate angiotensin-converting enzyme (ACE)-1 inhibitory activity, which were not increased by UF and NF fractionation. CONCLUSION: Fractionation of an FPH using membrane separation, with a molecular weight cut-off adapted to the peptide composition, may provide an effective means to concentrate CGRP-like peptides and peptides enriched in selected amino acids. The peptide size distribution observed after UF and NF fractionation demonstrates that it is misleading to characterize the fractions obtained by membrane filtration according to the MW cut-off of the membrane only, as is currently done in the literature.
Asunto(s)
Proteínas de Peces/química , Gastrinas/aislamiento & purificación , Péptidos/aislamiento & purificación , Aminoácidos/aislamiento & purificación , Animales , Antioxidantes/aislamiento & purificación , Antioxidantes/farmacología , Péptido Relacionado con Gen de Calcitonina/aislamiento & purificación , Colecistoquinina/aislamiento & purificación , Productos Pesqueros , Peces , Hidrólisis , Peso Molecular , Péptidos/química , Péptidos/farmacología , Peptidil-Dipeptidasa A/aislamiento & purificación , Peptidil-Dipeptidasa A/farmacología , Ultrafiltración/métodosRESUMEN
On-site greywater recycling is one of the main ways of preserving water resources in urban or arid areas. This study aims to formulate model synthetic greywater (SGW) in order to evaluate and compare the performances of several recycling processes on a reproducible effluent. The formulated SGW is composed of septic effluent to provide indicators of faecal contamination, and technical quality chemical products to simulate organic pollution of greywater. To ensure that the SGW developed is representative of household greywater, its analysis was compared to real greywater collected and analysed (RGWs) and to real greywater mentioned in previous publications (RGW(L)). The performance of a direct nanofiltration process with a concentration factor of 87.5% at 35 bar was then tested on both real greywater and SGW. The laboratory experimental results are promising: fluxes and retention rates were high, and similar for both effluents. The permeation flux was higher than 50 L h(-1) m(-2). Retentions greater than 97% for biochemical oxygen demand for 5 days (BOD5) and 92% for anionic surfactants were observed. No Enterococcus were detected in the two permeates. These results confirm that the model SGW developed in this study shows the same behaviour as real greywater when recycled. Thus, the use of this SGW developed in this study was validated for the evaluation of membrane efficiency to treat greywater. This new tool will be a real asset for future studies.
Asunto(s)
Conservación de los Recursos Naturales/métodos , Agua Dulce/química , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodos , Abastecimiento de Agua , HumanosRESUMEN
Total lipid and phospholipid recovery as well as amino acid quality and composition from cuttlefish (Sepia officinalis) and sardine (Sardina pilchardus) were compared. Enzymatic hydrolyses were performed using the three proteases Protamex, Alcalase, and Flavourzyme by the pH-stat method (24 h, pH 8, 50 degrees C). Three fractions were generated: an insoluble sludge, a soluble aqueous phase, and an oily phase. For each fraction, lipids, phospholipids, and proteins were quantified. Quantitative and qualitative analyses of the raw material and hydrolysates were performed. The degree of hydrolysis (DH) for cuttlefish viscera was 3.2% using Protamex, 6.8% using Flavourzyme, and 7% using Alcalase. DH for sardine viscera was 1.9% (using Flavourzyme), 3.1% (using Protamex) and 3.3% (using Alcalase). Dry matter yields of all hydrolysis reactions increased in the aqueous phases. Protein recovery following hydrolysis ranged from 57.2% to 64.3% for cuttlefish and 57.4% to 61.2% for sardine. Tissue disruption following protease treatment increased lipid extractability, leading to higher total lipid content after hydrolysis. At least 80% of the lipids quantified in the raw material were distributed in the liquid phases for both substrates. The hydrolysed lipids were richer in phospholipids than in the lipids extracted by classical chemical extraction, especially after Flavourzyme hydrolysis for cuttlefish and Alcalase hydrolysis for sardine. The total amino acid content differed according to the substrate and the enzyme used. However, regardless of the raw material or the protease used, hydrolysis increased the level of essential amino acids in the hydrolysates, thereby increasing their potential nutritional value for feed products.